1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
Similar device in database: Alps N7102
General Specifications | |
---|---|
Manufacturer | alps |
Model | GT-N7102 |
Firmware | 4.1.9; eng.yangbin.li.1358479687; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Display | 960 x 540; DPI: 240; Evaluated Size: 4,6" |
Touch screen | NOT multitouch 1 point |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 1024 MB (997 MB available) |
Flash | 4 GB (3.589 GB actual); 16 GB (14.629 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM; Net: HSPA |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Back camera | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Sensors | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 4008 |
FM radio | Supported by chipset |
Owner's comment: | note 2 bluebo n7100 |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (yangbin.li@yatxsrv1) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Fri Jan 18 11:27:53 CST 2013
CODENAME: REL
Mainboard: simcom77_twn_cu_ics2
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: simcom77_twn_cu_ics2
DISPLAY: ALPS.ICS2.MP.V1
FINGERPRINT: alps/simcom77_twn_cu_ics2/simcom77_twn_cu_ics2:4.0.4/IMM76D/1358479687:user/release-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: release-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1862.86
processor : 1
BogoMIPS : 1869.41
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<6>[13692.574979] (0)[Gsensor] [FFFFFFF7 FFFFFF3E FFFFFF60] => [ -9 -194 -160] after
<7>[13692.576161] (1)[12820:Thread-928] exit
<7>[13692.587638] (1)[12826:Thread-930] exit
<7>[13692.620529] (0)[12847:dmesg] exit
<7>[13692.620766] (0)[12847:dmesg] sig 17 to [12831:AsyncTask #2]
<6>[13692.634297] (0)[Gsensor] [FFFFFFF8 FFFFFF3F FFFFFF62] => [ -8 -193 -158] after
<7>[13692.640252] (0)[307:WifiStateMachin] fork [12849:WifiStateMachin]
<7>[13692.641575] (0)[12849:WifiStateMachin] set proc[12849] name: ->[loadDriverThrea]
<6>[13692.660393] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[13692.660407] (0)[WLAN] Power on
<3>[13692.660426] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[13692.660453] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[13692.662069] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[13692.662088] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO183)
<3>[13692.662099] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[13692.662109] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[13692.662120] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[13692.662130] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[13692.662140] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[13692.662151] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[13692.662161] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[13692.662172] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[13692.662184] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[13692.662194] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[13692.662204] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[13692.662214] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[13692.662225] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[13692.662235] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[13692.662247] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[13692.662257] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO186)
<3>[13692.662268] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[13692.662281] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[13692.662293] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[13692.662316] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[13692.671163] (1)[264:er.ServerThread] fork [12850:er.ServerThread]
<7>[13692.673426] (0)[12850:er.ServerThread] set proc[12850] name: ->[Thread-846]
<7>[13692.677390] (0)[12850:Thread-846] exit
<6>[13692.694309] (0)[Gsensor] [FFFFFFF7 FFFFFF40 FFFFFF60] => [ -9 -192 -160] after
<7>[13692.703309] (0)WQ_WARN: cpu:0, proc:kworker/0:3, [thermal_zone_device_check+0x0/0x18]dur: 310031615 > 15ms
<7>[13692.733936] (0)[488:iatek.bluetooth] fork [12851:iatek.bluetooth]
<7>[13692.734287] (0)[12851:iatek.bluetooth] set proc[12851] name: ->[BtFtpServiceThr]
<6>[13692.754217] (0)[Gsensor] [FFFFFFF8 FFFFFF3F FFFFFF5E] => [ -8 -193 -162] after
<6>[13692.814250] (0)[Gsensor] [FFFFFFF6 FFFFFF40 FFFFFF60] => [ -10 -192 -160] after
<3>[13692.863239] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[13692.863261] (1)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[13692.863277] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[13692.863457] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[13692.863470] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[13692.863482] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[13692.863696] (0)mtk_get_bus_freq() return 260000
<3>[13692.863913] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[13692.863926] (1)Flush type = 4 Rx Queue
<3>[13692.864105] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[13692.864122] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[13692.864135] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[13692.864145] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[13692.864156] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[13692.864171] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[13692.864183] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[13692.864194] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[13692.864206] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[13692.869844] (1)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<6>[13692.874319] (0)[Gsensor] [FFFFFFF7 FFFFFF41 FFFFFF5F] => [ -9 -191 -161] after
<3>[13692.875479] (1)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[13692.881139] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[13692.881159] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[13692.881175] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[13692.881190] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[13692.892212] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[13692.892229] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[13692.897283] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[13692.897302] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[13692.897447] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[13692.897463] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120611140339a
<3>[13692.897475] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[13692.897486] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[13692.897497] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[13692.897508] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = ALPS
<3>[13692.897519] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<6>[13692.934766] (0)[Gsensor] [FFFFFFF6 FFFFFF41 FFFFFF5E] => [ -10 -191 -162] after
<7>[13692.937780] (1)[12756:atana:providers] fork [12852:atana:providers]
<7>[13692.950281] (1)[12852:atana:providers] set proc[12852] name: ->[AsyncTask #3]
<3>[13692.978950] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(13, 436) ok
<3>[13692.979689] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf146930)
<3>[13692.980729] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[13692.981434] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[13692.981449] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[13692.981463] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[13692.981473] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<6>[13692.994258] (0)[Gsensor] [FFFFFFF6 FFFFFF41 FFFFFF5E] => [ -10 -191 -162] after
<3>[13692.997180] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[13692.997196] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[13692.997209] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[13692.997222] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[13692.997235] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[13692.997244] (0)board_sdio_ctrl force off before on
<6>[13692.997252] (0)mtk_wcn_cmb_sdio_off (3)
<6>[13692.997459] (0)mtk_wcn_cmb_sdio_on (3)
<3>[13692.997576] (0)msdc3 -> USR Resume <- msdc_pm() : L<1691> PID
<3>[13693.013462] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[13693.013485] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[13693.013502] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<7>[13693.013514] (1)[12835:pool-3-thread-1] fork [12853:pool-3-thread-1]
<7>[13693.017017] (0)[12853:pool-3-thread-1] set proc[12853] name: ->[pool-1-thread-1]
<3>[13693.040756] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1761> PID
<7>[13693.041797] (1)[12756:atana:providers] fork [12854:atana:providers]
<6>[13693.054195] (0)[Gsensor] [FFFFFFF6 FFFFFF41 FFFFFF5E] => [ -10 -191 -162] after
<3>[13693.054361] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4075> PID
<3>[13693.054399] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[13693.054417] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[13693.054434] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[13693.055522] (0)mmc2: new high speed SDIO card at address 0001
<6>[13693.057073] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[13693.057089] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[13693.057100] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[13693.057109] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[13693.057118] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[13693.057127] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[13693.057254] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[13693.057294] (0)WQ_WARN: cpu:4, proc:kworker/u:1, [mmc_rescan+0x0/0x2dc]dur: 58546461 > 15ms
<7>[13693.063713] (0)[12854:atana:providers] set proc[12854] name: ->[AsyncTask #4]
<6>[13693.114253] (0)[Gsensor] [FFFFFFF7 FFFFFF41 FFFFFF5D] => [ -9 -191 -163] after
<6>[13693.153258] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[13693.153439] (1)[2:kthreadd] fork [12855:kthreadd]
<6>[13693.156821] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[13693.157199] (0)[RT_MONITOR]WARNNING [12855:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [12855:ksdioirqd/mmc2]
<6>[13693.174207] (0)[Gsensor] [FFFFFFF5 FFFFFF41 FFFFFF5C] => [ -11 -191 -164] after
<6>[13693.234226] (0)[Gsensor] [FFFFFFF5 FFFFFF42 FFFFFF5D] => [ -11 -190 -163] after
<6>[13693.294732] (0)[Gsensor] [FFFFFFF7 FFFFFF43 FFFFFF5B] => [ -9 -189 -165] after
<7>[13693.330460] (0)WQ_WARN: cpu:4, proc:kworker/u:1, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 19533462 > 15ms
<6>[13693.354204] (0)[Gsensor] [FFFFFFF6 FFFFFF44 FFFFFF59] => [ -10 -188 -167] after
<7>[13693.358152] (0)[12770:Thread-934] exit
<7>[13693.372275] (0)[12702:facebook.katana] fork [12856:facebook.katana]
<7>[13693.376724] (0)[12856:facebook.katana] set proc[12856] name: ->[pool-2-thread-1]
<7>[13693.378205] (0)[12702:facebook.katana] fork [12857:facebook.katana]
<7>[13693.386818] (0)[12857:facebook.katana] set proc[12857] name: ->[.AnalyticsQueue]
<6>[13693.414229] (0)[Gsensor] [FFFFFFF6 FFFFFF43 FFFFFF5C] => [ -10 -189 -164] after
<7>[13693.460044] (1)[164:netd] fork [12858:netd]
<6>[13693.474271] (0)[Gsensor] [FFFFFFF6 FFFFFF43 FFFFFF5A] => [ -10 -189 -166] after
<7>[13693.518049] (1)[12858:netd] exit
<6>[13693.534266] (0)[Gsensor] [FFFFFFF6 FFFFFF46 FFFFFF5A] => [ -10 -186 -166] after
<6>[13693.594367] (0)[Gsensor] [FFFFFFF5 FFFFFF44 FFFFFF59] => [ -11 -188 -167] after
<7>[13693.626465] (1)[12756:atana:providers] fork [12859:atana:providers]
<7>[13693.636524] (1)[12859:atana:providers] set proc[12859] name: ->[AsyncTask #5]
<6>[13693.654371] (0)[Gsensor] [FFFFFFF6 FFFFFF45 FFFFFF58] => [ -10 -187 -168] after
<6>[13693.714449] (0)[Gsensor] [FFFFFFF5 FFFFFF46 FFFFFF5B] => [ -11 -186 -165] after
<7>[13693.770680] (1)[12773:Thread-936] exit
<6>[13693.774287] (0)[Gsensor] [FFFFFFF5 FFFFFF45 FFFFFF58] => [ -11 -187 -168] after
<6>[13693.834344] (0)[Gsensor] [FFFFFFF5 FFFFFF46 FFFFFF59] => [ -11 -186 -167] after
<7>[13693.839163] (1)[12714:Binder Thread #] fork [12860:Binder Thread #]
<7>[13693.840989] (1)[12860:Binder Thread #] set proc[12860] name: ->[Binder Thread #]
<6>[13693.894330] (0)[Gsensor] [FFFFFFF6 FFFFFF46 FFFFFF59] => [ -10 -186 -167] after
<6>[13693.954331] (0)[Gsensor] [FFFFFFF5 FFFFFF46 FFFFFF57] => [ -11 -186 -169] after
<7>[13693.981771] (1)[2:kthreadd] fork [12861:kthreadd]
<7>[13694.013295] (0)WQ_WARN: cpu:0, proc:kworker/0:3, [thermal_zone_device_check+0x0/0x18]dur: 309995384 > 15ms
<6>[13694.014306] (0)[Gsensor] [FFFFFFF6 FFFFFF46 FFFFFF5A] => [ -10 -186 -166] after
<6>[13694.070009] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[13694.070025] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[13694.070045] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[13694.070206] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[13694.070241] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[13694.070716] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[13694.071582] (0)[12849:loadDriverThrea] exit
<6>[13694.074463] (0)[Gsensor] [FFFFFFF6 FFFFFF46 FFFFFF59] => [ -10 -186 -167] after
<6>[13694.089999] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[13694.090029] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[13694.104397] (0)init: starting `wpa_supplicant`
<7>[13694.104618] (0)[1:init] fork [12862:init]
<7>[13694.105346] (1)[12862:init] set proc[12862] name: ->[logwrapper]
<7>[13694.106147] (0)[307:WifiStateMachin] fork [12863:WifiStateMachin]
<7>[13694.106202] (1)[12863:WifiStateMachin] set proc[12863] name: ->[WifiMonitor]
<7>[13694.116917] (1)[12862:logwrapper] fork [12864:logwrapper]
<7>[13694.123518] (1)[12864:logwrapper] set proc[12864] name: ->[wpa_supplicant]
<6>[13694.134272] (0)[Gsensor] [FFFFFFF5 FFFFFF46 FFFFFF58] => [ -11 -186 -168] after
<7>[13694.158305] (0)[12741:AnalyticsThread] exit
<6>[13694.194996] (0)[Gsensor] [FFFFFFF6 FFFFFF46 FFFFFF57] => [ -10 -186 -169] after
<6>[13694.254285] (0)[Gsensor] [FFFFFFF6 FFFFFF45 FFFFFF57] => [ -10 -187 -169] after
<6>[13694.314231] (0)[Gsensor] [FFFFFFF5 FFFFFF46 FFFFFF59] => [ -11 -186 -167] after
<6>[13694.374273] (0)[Gsensor] [FFFFFFF6 FFFFFF45 FFFFFF57] => [ -10 -187 -169] after
<6>[13694.434259] (0)[Gsensor] [FFFFFFF8 FFFFFF45 FFFFFF57] => [ -8 -187 -169] after
<6>[13694.494743] (0)[Gsensor] [FFFFFFF6 FFFFFF45 FFFFFF5B] => [ -10 -187 -165] after
<6>[13694.554207] (0)[Gsensor] [FFFFFFF8 FFFFFF46 FFFFFF59] => [ -8 -186 -167] after
<6>[13694.614324] (0)[Gsensor] [FFFFFFF8 FFFFFF45 FFFFFF5B] => [ -8 -187 -165] after
<6>[13694.674250] (0)[Gsensor] [FFFFFFF7 FFFFFF44 FFFFFF59] => [ -9 -188 -167] after
<7>[13694.731565] (0)[12823:com.specdevice] exit
<6>[13694.734230] (0)[Gsensor] [FFFFFFF8 FFFFFF45 FFFFFF59] => [ -8 -187 -167] after
<0>[13694.749455] (0)[MUSB]mt_usb_disconnect 289: [MUSB] USB is ready for disconnect
<6>[13694.794253] (0)[Gsensor] [FFFFFFF9 FFFFFF45 FFFFFF5B] => [ -7 -187 -165] after
<4>[13694.827348] (0)[TestMode] Disable Safty Timer : no UI display
<6>[13694.854308] (0)[Gsensor] [FFFFFFF9 FFFFFF44 FFFFFF59] => [ -7 -188 -167] after
<7>[13694.872743] (0)WQ_WARN: cpu:4, proc:kworker/u:0, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 19318538 > 15ms
<6>[13694.914209] (0)[Gsensor] [FFFFFFF9 FFFFFF44 FFFFFF5A] => [ -7 -188 -166] after
<6>[13694.974319] (0)[Gsensor] [FFFFFFF9 FFFFFF44 FFFFFF5A] => [ -7 -188 -166] after
<6>[13695.034268] (0)[Gsensor] [FFFFFFF9 FFFFFF45 FFFFFF5B] => [ -7 -187 -165] after
<7>[13695.058574] (0)[12544:android.vending] fork [12865:android.vending]
<7>[13695.058635] (1)[12865:android.vending] set proc[12865] name: ->[pool-1-thread-1]
<6>[13695.094385] (0)[Gsensor] [FFFFFFFA FFFFFF44 FFFFFF5A] => [ -6 -188 -166] after
<6>[13695.154214] (0)[Gsensor] [FFFFFFFA FFFFFF44 FFFFFF5B] => [ -6 -188 -165] after
<6>[13695.214281] (0)[Gsensor] [FFFFFFFA FFFFFF44 FFFFFF5A] => [ -6 -188 -166] after
<7>[13695.221652] (1)[12831:AsyncTask #2] fork [12866:AsyncTask #2]
<7>[13695.232601] (1)[12866:AsyncTask #2] set proc[12866] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1
ro.build.version.incremental=eng.yangbin.li.1358479687
ro.custom.build.version=I968.I968.02.05.F.A-V1.0.5B04Q18
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.1.9
ro.build.date=Fri Jan 18 11:30:38 CST 2013
ro.build.date.utc=1358479838
ro.build.type=user
ro.build.user=yangbin.li
ro.build.host=yatxsrv1
ro.build.tags=release-keys
ro.product.model=GT-N7102
ro.product.brand=samsung
ro.product.name=I968
ro.product.device=simcom77_twn_cu_ics2
ro.product.board=simcom77_twn_cu_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=simcom77_twn_cu_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=simcom77_twn_cu_ics2-user 4.0.4 IMM76D eng.yangbin.li.1358479687 release-keys
ro.build.fingerprint=alps/simcom77_twn_cu_ics2/simcom77_twn_cu_ics2:4.0.4/IMM76D/1358479687:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
persist.sys.timezone=Asia/Shanghai
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.ringtone=S_Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285155 0 - Live 0xbf1f7000 (P)
cfg80211 122004 0 - Live 0xbf1ce000
mtk_fm_priv 2399 0 - Live 0xbf1ca000 (P)
mtk_fm_drv 98433 1 mtk_fm_priv, Live 0xbf1aa000
mtk_stp_bt 39986 0 - Live 0xbf19d000
mtk_stp_gps 37294 0 - Live 0xbf190000
mtk_stp_uart 21589 0 - Live 0xbf187000 (P)
mtk_stp_wmt 372848 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11d000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf114000
devinfo 840 0 - Live 0xbf110000 (P)
devapc 4553 0 - Live 0xbf10b000 (P)
sec 90369 0 - Live 0xbf0ee000 (P)
vcodec_kernel_driver 28254 0 - Live 0xbf0e2000 (P)
m4u 113419 24 - Live 0xbf0bd000 (P)
ccmni 17126 0 - Live 0xbf0b4000 (P)
ccci 116351 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127258 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23590 0 - Live 0xbf054000
pvrsrvkm 233127 127 mtklfb, Live 0xbf00d000
mtk_hwe 1394 0 - Live 0xbf009000 (P)
aed 16380 3 - Live 0xbf000000 (P)
RAM: 1024 MB (997 MB available)
System RAM: 997.000MB
mtkfb.0: 5.000MB
Flash: 4 GB (3.589 GB actual); 16 GB (14.629 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 14.629 GB
Touch Screen for alps GT-N7102
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Replacement Battery for alps GT-N7102
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Cover Cases for alps GT-N7102
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |