一般规格 | |
---|---|
生产厂家 | alps |
型号 | GT-I9300 |
Android版 | 4.0.1; eng.wangqin.1359106441; SDK15 |
中央处理单元 | 3 cores; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
显示 | 854 x 480; DPI: 240; Evaluated Size: 4,1" |
触摸屏 | Multitouch 5 points |
图形处理器 | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
内存RAM | 512 MB (486 MB available) |
快闪记忆体 | 4 GB (3.631 GB actual); 16 GB (15.625 GB actual) (见存储器映射选项卡) |
沟通 | |
电话 | GSM; Net: EDGE |
WiFi | wlan_mt6620; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB主机 | No |
蓝牙 | Bluetooth 4.0+HS |
全球定位系统 | Yes |
高级功能 | |
前置摄像头 | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
背照相机 | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
传感器 | MAG3110 3-axis Magnetic Field sensor (FREESCALE); range: 0...400; resolution: 0,195 (0,049%); power: 0,55mA; |
MMA8452Q 3-axis Accelerometer (FREESCALE); range: 0...39,22; resolution: 0,001 (0,002%); power: 0,005mA; | |
ap3216c Proximity Sensor (LSC); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
ap3216c Light Sensor (LSC); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
震动模式 | Yes |
支持的语言 | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
电池 | Technology: Li-ion; Voltage: 3966 |
FM radio | 76MHz to 108MHz + Transmitter |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Jan 25 17:33:46 CST 2013
CODENAME: REL
Mainboard: simcom75_twn_cu_ics2
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: simcom75_twn_cu_ics2
DISPLAY: IMM76D.I9300ZSBLI1
FINGERPRINT: samsung/simcom75_twn_cu_ics2/simcom75_twn_cu_ics2:4.0.1/IMM76D/1359106441:user/test-keys
HARDWARE: mt6575
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : SMDK4x12
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[40260.213186] (0)[6305:dmesg] exit
<7>[40260.213365] (0)[6305:dmesg] sig 17 to [6300:AsyncTask #2]
<7>[40260.282023] (0)[287:WifiStateMachin] fork [6321:WifiStateMachin]
<7>[40260.282335] (0)[6321:WifiStateMachin] set proc[6321] name: ->[loadDriverThrea]
<7>[40260.343253] (0)[246:er.ServerThread] fork [6322:er.ServerThread]
<7>[40260.345887] (0)[6322:er.ServerThread] set proc[6322] name: ->[Thread-383]
<6>[40260.347774] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[40260.347785] (0)[WLAN] Power on
<3>[40260.347798] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[40260.347814] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[40260.347852] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[40260.347865] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO186)
<3>[40260.347874] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO187)
<3>[40260.347882] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[40260.347891] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[40260.347900] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[40260.347909] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[40260.347919] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[40260.347928] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[40260.347937] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[40260.347946] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[40260.347955] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[40260.347965] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[40260.347974] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[40260.347983] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[40260.347992] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[40260.348001] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[40260.348009] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[40260.348018] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[40260.348028] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO185)
<3>[40260.348037] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[40260.348047] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<7>[40260.349098] (0)[6322:Thread-383] exit
<3>[40260.553617] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[40260.553637] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[40260.553816] (0)[WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[40260.553829] (0)[STP-PSM] [E]_stp_psm_notify_stp(1137):ERROR! Invalid Action!!
<4>[40260.553834] (0)
<3>[40260.553856] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[40260.553870] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[40260.554067] (0)mt6575_get_bus_freq() return 192400
<3>[40260.554220] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[40260.554231] (0)Flush type = 4 Rx Queue
<3>[40260.554358] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[40260.554372] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[40260.554383] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[40260.554392] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[40260.554402] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[40260.554416] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[40260.554426] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[40260.554436] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[40260.554445] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[40260.559954] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[40260.565460] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[40260.570932] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[40260.570945] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[40260.570959] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[40260.570971] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[40260.581426] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[40260.581440] (0)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[40260.583233] (0)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[40260.585865] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[40260.585881] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120628171317
<3>[40260.585891] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[40260.585901] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[40260.585911] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001d
<3>[40260.585920] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1226
<3>[40260.585930] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa724
<3>[40260.586399] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x483a
<3>[40260.586409] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[40260.808533] (0)[6294:com.specdevice] exit
<3>[40260.912708] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 788) ok
<3>[40260.912784] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[40260.913173] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14770c)
<3>[40260.917793] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[40260.918241] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[40260.918253] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[40260.918264] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[40260.918272] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[40260.935679] (0)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[40260.935693] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[40260.935706] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[40260.935717] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[40260.935724] (0)board_sdio_ctrl force off before on
<6>[40260.935731] (0)mtk_wcn_cmb_sdio_off (3)
<6>[40260.935772] (0)mtk_wcn_cmb_sdio_on (3)
<3>[40260.935806] (0)msdc3 -> USR Resume <- msdc_pm() : L<1539> PID
<3>[40260.953779] (0)msdc3 -> ================ <- msdc_set_mclk() : L<841> PID
<3>[40260.953799] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<843> PID
<3>[40260.953814] (0)msdc3 -> ================ <- msdc_set_mclk() : L<844> PID
<3>[40260.979262] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1600> PID
<3>[40261.005284] (0)msdc3 -> SD latch data<0> cmd<1> <- msdc_ops_set_ios() : L<3831> PID
<3>[40261.005338] (0)msdc3 -> ================ <- msdc_set_mclk() : L<841> PID
<3>[40261.005369] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<843> PID
<3>[40261.005398] (0)msdc3 -> ================ <- msdc_set_mclk() : L<844> PID
<6>[40261.006543] (0)mmc2: new high speed SDIO card at address 0001
<6>[40261.009183] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[40261.009207] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[40261.009226] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[40261.009244] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[40261.009259] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[40261.009398] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[40261.009455] (0)WQ_WARN: cpu:1, proc:kworker/u:2, [mmc_rescan+0x0/0x3c0]dur: 72749616 > 15ms
<7>[40261.013134] (0)[5602:Smack Packet Wr] exit
<6>[40261.093612] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[40261.093741] (0)[2:kthreadd] fork [6323:kthreadd]
<6>[40261.093766] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[40261.093795] (0)[wlan] net_device prDev(0xc78a4000) allocated
<4>[40261.094101] (0)[RT_MONITOR]WARNNING [6323:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [6323:ksdioirqd/mmc2]
<5>[40261.104001] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[40261.109100] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[40261.109480] (0)[wlan] Virtual Address = e45dd000 for COMMON MGMT MEMORY POOL.
<5>[40261.109496] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[40261.109518] (0)[wlan] Virtual Address = e45df000 for SW_RFB_T.
<5>[40261.109530] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[40261.109549] (0)[wlan] Virtual Address = e45e3000 for MSDU_INFO_T.
<6>[40261.109561] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[40261.124632] (0)[wlan] Chip ID: 0x6620
<6>[40261.124645] (0)[wlan] Revision ID: 0x1
<7>[40261.128897] (0)[6180:IntentService[D] exit
<6>[40261.785994] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[40262.023872] (0)[wlan] Ready bit asserted
<5>[40262.065370] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[40262.065390] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[40262.065465] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[40262.065543] (0)[wlan] Domain: map=0, idx=0, code=0x0000
<7>[40262.065890] (0)[2:kthreadd] fork [6324:kthreadd]
<5>[40262.065926] (0)[wlan] tx_thread starts running...
<6>[40262.066982] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[40262.066997] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[40262.067014] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[40262.067854] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[40262.067889] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[40262.068866] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[40262.071717] (0)[6321:loadDriverThrea] exit
<6>[40262.090140] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[40262.090165] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[40262.091215] (0)[1:init] fork [6325:init]
<7>[40262.092177] (0)[287:WifiStateMachin] fork [6326:WifiStateMachin]
<7>[40262.092633] (0)[6326:WifiStateMachin] set proc[6326] name: ->[WifiMonitor]
<7>[40262.095131] (0)[6325:init] set proc[6325] name: ->[logwrapper]
<7>[40262.096830] (0)[6325:logwrapper] fork [6327:logwrapper]
<7>[40262.097316] (0)[6327:logwrapper] set proc[6327] name: ->[wpa_supplicant]
<5>[40262.193904] (0)[wlan] N=0 closed
<5>[40262.193925] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 37135990
<5>[40262.193939] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[40262.194335] (0)[wlan] NAF=0,0,0
<6>[40262.194457] (0)[wlan] NAF=0,0,0
<5>[40262.361000] (0)[wlan] [13] TRANSITION: [0] -> [2]
<5>[40262.558260] (0)[wlan] [13] TRANSITION: [2] -> [0]
<6>[40262.559870] (0)[wlan] NAF=0,0,0
<5>[40262.561543] (0)[wlan] N=0 closed
<5>[40262.561566] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 37136350
<5>[40262.561580] (0)[wlan] [13] TRANSITION: [0] -> [0]
<5>[40262.561593] (0)[wlan] [13] TRANSITION: [0] -> [1]
<5>[40262.561611] (0)[wlan] [13] TRANSITION: [1] -> [6]
<5>[40262.561625] (0)[wlan] ChReq net=0 token=1 b=1 c=6 s=0
<6>[40262.562658] (0)[wlan] NAF=0,0,0
<5>[40262.562870] (0)[wlan] ChGrant net=0 token=1 ch=6 sco=0
<5>[40262.562911] (0)[wlan] [13] TRANSITION: [6] -> [7]
<5>[40262.562938] (0)[wlan] STA 40mAllowed=0
<6>[40262.563012] (0)[wlan] Wait Cmd TxSeqNum:1
<6>[40262.564122] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[40262.565155] (0)[wlan] Wait Cmd TxSeqNum:2
<6>[40262.572342] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[40262.574985] (0)[wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[40262.575012] (0)[wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[40262.575032] (0)[wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[40262.575066] (0)[wlan] N=0 b=1 c=6 s=0 e=0 h=0 I=0x00 l=1 p=1
<5>[40262.575102] (0)[wlan]
<4>[40262.575121] (0)b0:48:7a:d2:41:c0 [17] TRANSITION: [0] -> [3]
<4>[40262.575130] (0)
<5>[40262.575191] (0)[wlan] [wifi] wlan0 netif_carrier_on [ssid:TP-LINK_D241C0 b0:48:7a:d2:41:c0]
<5>[40262.575224] (0)[wlan] EVENT-ROAMING START: Current Time = 37136370
<5>[40262.575249] (0)[wlan] [27] TRANSITION: [0] -> [1]
<5>[40262.575271] (0)[wlan] [13] TRANSITION: [7] -> [10]
<6>[40262.575517] (0)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[40262.580847] (0)[wlan] QM: +STA[0]
<5>[40262.608420] (0)[wlan] N=0 b=1 c=6 s=0 e=0 h=0 I=0x00 l=1 p=1
<7>[40262.619430] (0)[287:WifiStateMachin] fork [6328:WifiStateMachin]
<7>[40262.619487] (0)[6328:WifiStateMachin] set proc[6328] name: ->[DhcpStateMachin]
<6>[40262.661137] (0)[wlan] eNetTypeIndex:0, ePwrMode:0, fgEnCmdEvent:1
<5>[40262.661157] (0)[wlan] Set Wi-Fi PS mode to CAM (0)
<7>[40262.666862] (0)[1:init] fork [6329:init]
<7>[40262.671304] (0)[6329:init] set proc[6329] name: ->[logwrapper]
<7>[40262.673041] (0)[6329:logwrapper] fork [6330:logwrapper]
<7>[40262.673535] (0)[6330:logwrapper] set proc[6330] name: ->[dhcpcd]
<7>[40262.679443] (0)[6269:ReferenceQueueD] exit
<7>[40262.680013] (0)[6271:FinalizerDaemon] exit
<7>[40262.680509] (0)[6273:FinalizerWatchd] exit
<7>[40262.686424] (0)[93:zygote] fork [6331:zygote]
<7>[40262.687203] (0)[93:zygote] fork [6332:zygote]
<7>[40262.688378] (0)[6331:zygote] fork [6333:zygote]
<7>[40262.688496] (0)[6332:zygote] set proc[6332] name: ->[ReferenceQueueD]
<7>[40262.688933] (0)[93:zygote] fork [6334:zygote]
<7>[40262.689102] (0)[6334:zygote] set proc[6334] name: ->[FinalizerDaemon]
<7>[40262.689470] (0)[93:zygote] fork [6335:zygote]
<7>[40262.689618] (0)[6333:zygote] set proc[6333] name: ->[GC]
<7>[40262.690266] (0)[6331:zygote] fork [6336:zygote]
<7>[40262.690327] (0)[6335:zygote] set proc[6335] name: ->[FinalizerWatchd]
<7>[40262.693296] (0)[6336:zygote] set proc[6336] name: ->[Signal Catcher]
<7>[40262.693918] (0)[6331:zygote] fork [6337:zygote]
<7>[40262.695214] (0)[6337:zygote] set proc[6337] name: ->[Compiler]
<7>[40262.695911] (0)[6331:zygote] fork [6338:zygote]
<7>[40262.699271] (0)[6338:zygote] set proc[6338] name: ->[ReferenceQueueD]
<7>[40262.699774] (0)[6331:zygote] fork [6339:zygote]
<7>[40262.699911] (0)[6339:zygote] set proc[6339] name: ->[FinalizerDaemon]
<7>[40262.700596] (0)[6331:zygote] fork [6340:zygote]
<7>[40262.701381] (0)[6340:zygote] set proc[6340] name: ->[FinalizerWatchd]
<7>[40262.703251] (0)[6331:zygote] set proc[6331] name: ->[com.sq.shop]
<5>[40262.705942] (0)[wlan] N=0 b=1 c=6 s=0 e=0 h=0 I=0x00 l=1 p=1
<7>[40262.715274] (0)[6331:com.sq.shop] fork [6341:com.sq.shop]
<7>[40262.716621] (0)[6331:com.sq.shop] set proc[6331] name: ->[re-initialized>]
<7>[40262.723778] (0)[6341:com.sq.shop] set proc[6341] name: ->[Binder Thread #]
<7>[40262.724315] (0)[6341:Binder Thread #] fork [6342:Binder Thread #]
<7>[40262.734626] (0)[6342:Binder Thread #] set proc[6342] name: ->[Binder Thread #]
<7>[40262.740342] (0)[6331:re-initialized>] set proc[6331] name: ->[com.sq.shop]
<7>[40262.754828] (0)[6343:dhcpcd] set proc[6343] name: ->[dhcpcd-run-hook]
<7>[40262.755006] (0)[6330:dhcpcd] fork [6343:dhcpcd-run-hook]
<7>[40262.768056] (0)[6343:dhcpcd-run-hook] fork [6344:dhcpcd-run-hook]
<7>[40262.784073] (0)[6344:dhcpcd-run-hook] set proc[6344] name: ->[ls]
<7>[40262.786400] (0)[6344:ls] exit
<7>[40262.786527] (0)[6344:ls] sig 17 to [6343:dhcpcd-run-hook]
<7>[40262.787608] (0)[6343:dhcpcd-run-hook] fork [6345:dhcpcd-run-hook]
<7>[40262.795423] (0)[6345:dhcpcd-run-hook] set proc[6345] name: ->[ls]
<7>[40262.797857] (0)[6345:ls] exit
<7>[40262.797989] (0)[6345:ls] sig 17 to [6343:dhcpcd-run-hook]
<7>[40262.801242] (0)[6343:dhcpcd-run-hook] fork [6346:dhcpcd-run-hook]
<7>[40262.804670] (0)[6346:dhcpcd-run-hook] set proc[6346] name: ->[ls]
<7>[40262.807080] (0)[6346:ls] exit
<7>[40262.807207] (0)[6346:ls] sig 17 to [6343:dhcpcd-run-hook]
<7>[40262.810115] (0)[6343:dhcpcd-run-hook] fork [6347:dhcpcd-run-hook]
<7>[40262.811783] (0)[6347:dhcpcd-run-hook] set proc[6347] name: ->[setprop]
<7>[40262.818845] (0)[6347:setprop] exit
<7>[40262.819003] (0)[6347:setprop] sig 17 to [6343:dhcpcd-run-hook]
<7>[40262.819920] (0)[6343:dhcpcd-run-hook] fork [6348:dhcpcd-run-hook]
<7>[40262.821794] (0)[6348:dhcpcd-run-hook] set proc[6348] name: ->[ls]
<7>[40262.824577] (0)[6348:ls] exit
<7>[40262.824703] (0)[6348:ls] sig 17 to [6343:dhcpcd-run-hook]
<7>[40262.824962] (0)[6343:dhcpcd-run-hook] exit
<7>[40262.825069] (0)[6343:dhcpcd-run-hook] sig 17 to [6330:dhcpcd]
<6>[40262.874409] (0)[RTlog insert] fib_inetaddr_event() wlan0 NETDEV_UP!
<6>[40262.874577] (0)<< [RTlog delete] inet_rtm_delroute !
<6>[40262.874603] (0)[RTlog info] inet_rtm_delroute cfg.fc_dst =0001a8c0
<6>[40262.874611] (0)[RTlog info] inet_rtm_delroute cfg.fc_gw =00000000 >>
<7>[40262.876093] (0)[6184:ndroid.settings] fork [6349:ndroid.settings]
<6>[40262.877331] (0)<< [RTlog insert] inet_rtm_newroute !
<6>[40262.877346] (0)[RTlog info] inet_rtm_newroute cfg.fc_dst =0001a8c0
<6>[40262.877354] (0)[RTlog info] inet_rtm_newroute cfg.fc_gw =00000000 >>
<6>[40262.877799] (0)<< [RTlog insert] inet_rtm_newroute !
<6>[40262.877812] (0)[RTlog info] inet_rtm_newroute cfg.fc_dst =00000000
<6>[40262.877820] (0)[RTlog info] inet_rtm_newroute cfg.fc_gw =0101a8c0 >>
<7>[40262.880604] (0)[6349:ndroid.settings] set proc[6349] name: ->[SharedPreferenc]
<7>[40262.881394] (0)[6330:dhcpcd] fork [6350:dhcpcd]
<7>[40262.881429] (0)[6350:dhcpcd] set proc[6350] name: ->[dhcpcd-run-hook]
<7>[40262.886422] (0)[6350:dhcpcd-run-hook] fork [6351:dhcpcd-run-hook]
<7>[40262.888031] (0)[6351:dhcpcd-run-hook] set proc[6351] name: ->[ls]
<7>[40262.890326] (0)[6351:ls] exit
<7>[40262.890450] (0)[6351:ls] sig 17 to [6350:dhcpcd-run-hook]
<7>[40262.891382] (0)[6350:dhcpcd-run-hook] fork [6352:dhcpcd-run-hook]
<7>[40262.893552] (0)[6352:dhcpcd-run-hook] set proc[6352] name: ->[ls]
<7>[40262.896952] (0)[6352:ls] exit
<7>[40262.897081] (0)[6352:ls] sig 17 to [6350:dhcpcd-run-hook]
<7>[40262.898448] (0)[6350:dhcpcd-run-hook] fork [6353:dhcpcd-run-hook]
<7>[40262.910731] (0)[6349:SharedPreferenc] exit
<7>[40262.912217] (0)[6353:dhcpcd-run-hook] set proc[6353] name: ->[setprop]
<7>[40262.919812] (0)[6353:setprop] exit
<7>[40262.919937] (0)[6353:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40262.920353] (0)[6350:dhcpcd-run-hook] fork [6354:dhcpcd-run-hook]
<7>[40262.921624] (0)[6354:dhcpcd-run-hook] set proc[6354] name: ->[setprop]
<7>[40262.926119] (0)[6354:setprop] exit
<7>[40262.926257] (0)[6354:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40262.927305] (0)[6350:dhcpcd-run-hook] fork [6355:dhcpcd-run-hook]
<7>[40262.928922] (0)[6355:dhcpcd-run-hook] set proc[6355] name: ->[setprop]
<7>[40262.935427] (0)[6355:setprop] exit
<7>[40262.935551] (0)[6355:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40262.936166] (0)[6350:dhcpcd-run-hook] fork [6356:dhcpcd-run-hook]
<7>[40262.939600] (0)[6356:dhcpcd-run-hook] set proc[6356] name: ->[setprop]
<7>[40262.947669] (0)[6356:setprop] exit
<7>[40262.947795] (0)[6356:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40262.948254] (0)[6350:dhcpcd-run-hook] fork [6357:dhcpcd-run-hook]
<7>[40262.949485] (0)[6357:dhcpcd-run-hook] set proc[6357] name: ->[setprop]
<7>[40262.956470] (0)[6300:AsyncTask #2] fork [6358:AsyncTask #2]
<7>[40262.959710] (0)[6357:setprop] exit
<7>[40262.959869] (0)[6357:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40262.960401] (0)[6350:dhcpcd-run-hook] fork [6359:dhcpcd-run-hook]
<7>[40262.962585] (0)[6359:dhcpcd-run-hook] set proc[6359] name: ->[setprop]
<7>[40262.972207] (0)[6359:setprop] exit
<7>[40262.972341] (0)[6359:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40262.973006] (0)[6350:dhcpcd-run-hook] fork [6360:dhcpcd-run-hook]
<7>[40262.983727] (0)[6360:dhcpcd-run-hook] set proc[6360] name: ->[setprop]
<7>[40263.002686] (0)[6360:setprop] exit
<7>[40263.002816] (0)[6360:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.003894] (0)[6350:dhcpcd-run-hook] fork [6361:dhcpcd-run-hook]
<7>[40263.005106] (0)[6361:dhcpcd-run-hook] set proc[6361] name: ->[setprop]
<7>[40263.008054] (0)[6361:setprop] exit
<7>[40263.008197] (0)[6361:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.009340] (0)[6350:dhcpcd-run-hook] fork [6362:dhcpcd-run-hook]
<7>[40263.011202] (0)[6362:dhcpcd-run-hook] set proc[6362] name: ->[ls]
<7>[40263.013775] (0)[6362:ls] exit
<7>[40263.013928] (0)[6362:ls] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.014549] (0)[6350:dhcpcd-run-hook] fork [6363:dhcpcd-run-hook]
<7>[40263.015616] (0)[6363:dhcpcd-run-hook] set proc[6363] name: ->[setprop]
<7>[40263.024622] (0)[6363:setprop] exit
<7>[40263.024790] (0)[6363:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.025609] (0)[6350:dhcpcd-run-hook] fork [6364:dhcpcd-run-hook]
<7>[40263.026543] (0)[6364:dhcpcd-run-hook] set proc[6364] name: ->[setprop]
<7>[40263.029524] (0)[6364:setprop] exit
<7>[40263.029648] (0)[6364:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.030091] (0)[6350:dhcpcd-run-hook] fork [6365:dhcpcd-run-hook]
<7>[40263.030798] (0)[6365:dhcpcd-run-hook] set proc[6365] name: ->[setprop]
<7>[40263.033320] (0)[6365:setprop] exit
<7>[40263.033442] (0)[6365:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.033965] (0)[6350:dhcpcd-run-hook] fork [6366:dhcpcd-run-hook]
<7>[40263.035187] (0)[6366:dhcpcd-run-hook] set proc[6366] name: ->[setprop]
<7>[40263.037753] (0)[6366:setprop] exit
<7>[40263.037878] (0)[6366:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.038316] (0)[6350:dhcpcd-run-hook] fork [6367:dhcpcd-run-hook]
<7>[40263.039642] (0)[6367:dhcpcd-run-hook] set proc[6367] name: ->[setprop]
<7>[40263.042583] (0)[6367:setprop] exit
<7>[40263.042711] (0)[6367:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.043155] (0)[6350:dhcpcd-run-hook] fork [6368:dhcpcd-run-hook]
<7>[40263.044041] (0)[6368:dhcpcd-run-hook] set proc[6368] name: ->[setprop]
<7>[40263.047283] (0)[6368:setprop] exit
<7>[40263.047414] (0)[6368:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.047854] (0)[6350:dhcpcd-run-hook] fork [6369:dhcpcd-run-hook]
<7>[40263.048606] (0)[6369:dhcpcd-run-hook] set proc[6369] name: ->[setprop]
<7>[40263.054645] (0)[6369:setprop] exit
<7>[40263.054821] (0)[6369:setprop] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.055521] (0)[6350:dhcpcd-run-hook] fork [6370:dhcpcd-run-hook]
<7>[40263.056256] (0)[6370:dhcpcd-run-hook] set proc[6370] name: ->[ls]
<7>[40263.058541] (0)[6370:ls] exit
<7>[40263.058666] (0)[6370:ls] sig 17 to [6350:dhcpcd-run-hook]
<7>[40263.058918] (0)[6350:dhcpcd-run-hook] exit
<7>[40263.059037] (0)[6350:dhcpcd-run-hook] sig 17 to [6330:dhcpcd]
<6>[40263.076376] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:1
<5>[40263.076396] (0)[wlan] Set Wi-Fi PS mode to FAST PS (2)
<6>[40263.089057] (0)<< [RTlog info] ip_rt_ioctl rt.flags =00000005
<6>[40263.089068] (0)[RTlog info] ip_rt_ioctl rt.dev =wlan0
<6>[40263.089075] (0)[RTlog info] ip_rt_ioctl rt.rt_dst =0101a8c0
<6>[40263.089082] (0)[RTlog info] ip_rt_ioct rt.rt_gateway =00000000
<6>[40263.089092] (0)[RTlog insert] p_rt_ioctl: cmd == SIOCADDRT! >>
<6>[40263.094629] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:1
<5>[40263.094650] (0)[wlan] Set Wi-Fi PS mode to FAST PS (2)
<7>[40263.098406] (0)[246:er.ServerThread] fork [6371:er.ServerThread]
<6>[40263.106773] (0)<< [RTlog info] ip_rt_ioctl rt.flags =00000003
<6>[40263.106783] (0)[RTlog info] ip_rt_ioctl rt.dev =wlan0
<6>[40263.106791] (0)[RTlog info] ip_rt_ioctl rt.rt_dst =00000000
<6>[40263.106798] (0)[RTlog info] ip_rt_ioct rt.rt_gateway =0101a8c0
<6>[40263.106811] (0)[RTlog insert] p_rt_ioctl: cmd == SIOCADDRT! >>
<7>[40263.120886] (0)[6358:AsyncTask #2] set proc[6358] name: ->[dmesg]
<7>[40263.156836] (0)[6371:er.ServerThread] set proc[6371] name: ->[SyncHandler-1]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=IMM76D.I9300ZSBLI1
ro.build.version.incremental=eng.wangqin.1359106441
ro.custom.build.version=M7503_T01_NFE
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.1
ro.build.date=Fri Jan 25 17:35:14 CST 2013
ro.build.date.utc=1359106514
ro.build.type=user
ro.build.user=wangqin
ro.build.host=userver-desktop
ro.build.tags=test-keys
ro.product.model=GT-I9300
ro.product.brand=samsung
ro.product.name=simcom75_twn_cu_ics2
ro.product.device=simcom75_twn_cu_ics2
ro.product.board=simcom75_twn_cu_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=simcom75_twn_cu_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=simcom75_twn_cu_ics2-user 4.0.1 IMM76D eng.wangqin.1359106441 test-keys
ro.build.fingerprint=samsung/simcom75_twn_cu_ics2/simcom75_twn_cu_ics2:4.0.1/IMM76D/1359106441:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=IMM76D.I9300ZSBLI1
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
persist.sys.timezone=Asia/Shanghai
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=1
ro.sf.hwrotation=0
ril.current.share_modem=1
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=false
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6620
mediatek.wlan.module.postfix=
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
ro.config.mms=/system/media/audio/notifications/OnTheHunt.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6620 286764 0 - Live 0xbf200000 (P)
cfg80211 121176 0 - Live 0xbf1d8000
mtk_fm_priv 8909 0 - Live 0xbf1d2000 (P)
mt6620_fm_drv 111889 1 mtk_fm_priv, Live 0xbf1aa000
mtk_stp_bt 39942 0 - Live 0xbf19d000
mtk_stp_gps 37190 0 - Live 0xbf190000
mtk_stp_uart 21689 1 - Live 0xbf187000 (P)
mtk_stp_wmt 370199 7 wlan_mt6620,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11e000 (P)
mtk_hif_sdio 18473 2 wlan_mt6620,mtk_stp_wmt, Live 0xbf115000
morecpu 1086 0 - Live 0xbf111000
devinfo 756 0 - Live 0xbf10d000 (P)
sec 109587 0 - Live 0xbf0ec000 (P)
vcodec_kernel_driver 23633 0 - Live 0xbf0e1000 (P)
mt6575_m4u 111246 6 - Live 0xbf0bc000 (P)
ccmni 17318 0 - Live 0xbf0b3000 (P)
ccci 117672 15 ccmni, Live 0xbf08b000 (P)
ccci_plat 126651 3 sec,ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb 5115 0 - Live 0xbf05e000 (P)
mtklfb 23562 0 - Live 0xbf054000
pvrsrvkm 232891 109 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 16188 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.631 GB actual); 16 GB (15.625 GB actual)
mmcblk0: 3.631 GB
mmcblk1: 15.625 GB
触摸屏为 alps GT-I9300
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
新电池 alps GT-I9300
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
占地面积 alps GT-I9300
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |