1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | alps |
Модель | GT-N7102 |
Версия Andriod | 4.1.9; eng.shilei.wang.1361859230; SDK15 |
Процессор | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Дисплей | 960 x 540; DPI: 240; Evaluated Size: 4,6" |
Сенсорный экран | Multitouch 5 points |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
ОЗУ | 1024 MB (997 MB available) |
Память | 4 GB (3.589 GB actual); 8 GB (7.402 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM, Dual SIM; Net: HSPA |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Доп. камера | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Датчики | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3902 |
FM radio | Supported by chipset |
Owner's comment: | alguna room? |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (shilei.wang@yatxsrv1) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Tue Feb 26 14:13:35 CST 2013
CODENAME: REL
Mainboard: simcom77_twn_cu_ics2
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: simcom77_twn_cu_ics2
DISPLAY: ALPS.ICS2.MP.V1
FINGERPRINT: alps/simcom77_twn_cu_ics2/simcom77_twn_cu_ics2:4.0.4/IMM76D/1361859230:user/release-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: release-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1862.86
processor : 1
BogoMIPS : 1869.41
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 850.074259] (1)[4647:Thread-253] exit
<7>[ 850.084866] (1)[4689:Thread-255] exit
<6>[ 850.106830] (0)[Gsensor] [FFFFFF05 FFFFFFF5 FFFFFFD9] => [ -251 -11 -39] after
<6>[ 850.166916] (0)[Gsensor] [FFFFFF04 FFFFFFF5 FFFFFFDB] => [ -252 -11 -37] after
<7>[ 850.174964] (0)[4724:dmesg] exit
<7>[ 850.175227] (0)[4724:dmesg] sig 17 to [4713:AsyncTask #2]
<7>[ 850.186848] (0)[305:WifiStateMachin] fork [4725:WifiStateMachin]
<7>[ 850.186902] (1)[4725:WifiStateMachin] set proc[4725] name: ->[loadDriverThrea]
<6>[ 850.198433] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[ 850.198445] (0)[WLAN] Power on
<3>[ 850.198460] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 850.198481] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 850.202479] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 850.202501] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO183)
<3>[ 850.202512] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 850.202522] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 850.202532] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 850.202543] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 850.202553] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 850.202564] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 850.202574] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 850.202584] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 850.202595] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 850.202605] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 850.202615] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 850.202625] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 850.202636] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 850.202646] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 850.202658] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[ 850.202669] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO186)
<3>[ 850.202679] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 850.202692] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 850.202704] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 850.202725] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<6>[ 850.226820] (0)[Gsensor] [FFFFFF03 FFFFFFF5 FFFFFFD8] => [ -253 -11 -40] after
<7>[ 850.231282] (0)[4721:netd] exit
<7>[ 850.235649] (1)[263:er.ServerThread] fork [4726:er.ServerThread]
<7>[ 850.236796] (1)[4726:er.ServerThread] set proc[4726] name: ->[Thread-184]
<7>[ 850.238264] (1)[4726:Thread-184] exit
<6>[ 850.286803] (0)[Gsensor] [FFFFFF04 FFFFFFF5 FFFFFFD8] => [ -252 -11 -40] after
<7>[ 850.295867] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 308695077 > 15ms
<5>[ 850.305906] (1)[Power/RTC] RTC_GPIO user 9 enables 32k (0x1200)
<6>[ 850.346811] (0)[Gsensor] [FFFFFF02 FFFFFFF3 FFFFFFDD] => [ -254 -13 -35] after
<7>[ 850.361083] (0)[4722:netd] exit
<6>[ 850.406815] (0)[Gsensor] [FFFFFF03 FFFFFFF4 FFFFFFD9] => [ -253 -12 -39] after
<3>[ 850.415845] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, rtc clock exported
<6>[ 850.466837] (0)[Gsensor] [FFFFFF03 FFFFFFF4 FFFFFFDB] => [ -253 -12 -37] after
<3>[ 850.515852] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 850.515876] (1)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 850.515891] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 850.516072] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 850.516084] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 850.516095] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 850.516318] (0)mtk_get_bus_freq() return 260000
<3>[ 850.516522] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 850.516535] (1)Flush type = 4 Rx Queue
<3>[ 850.516682] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 850.516698] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 850.516711] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 850.516721] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 850.516733] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 850.516749] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 850.516761] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 850.516773] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 850.516784] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 850.522187] (1)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<6>[ 850.526836] (0)[Gsensor] [FFFFFF03 FFFFFFF5 FFFFFFD6] => [ -253 -11 -42] after
<3>[ 850.527582] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[ 850.532985] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[ 850.533005] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[ 850.533021] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[ 850.533037] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 850.543683] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 850.543701] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 850.548280] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 850.548300] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 850.548440] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 850.548455] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120611140339a
<3>[ 850.548467] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 850.548478] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 850.548489] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 850.548500] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = ALPS
<3>[ 850.548511] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<6>[ 850.586812] (0)[Gsensor] [FFFFFF04 FFFFFFF5 FFFFFFDB] => [ -252 -11 -37] after
<3>[ 850.629860] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(13, 436) ok
<3>[ 850.630583] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf146948)
<3>[ 850.631584] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 850.632590] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 850.632606] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 850.632619] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 850.632631] (1)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<6>[ 850.646869] (0)[Gsensor] [FFFFFF04 FFFFFFF5 FFFFFFD7] => [ -252 -11 -41] after
<3>[ 850.648828] (1)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 850.648843] (1)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 850.648856] (1)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 850.648870] (1)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 850.648883] (1)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 850.648892] (1)board_sdio_ctrl force off before on
<6>[ 850.648899] (1)mtk_wcn_cmb_sdio_off (3)
<5>[ 850.648938] (1)[Power/clkmgr] [freq_meter] data = 41, freq = 0 MHz
<5>[ 850.648959] (1)[Power/clkmgr] [freq_meter] data = 41, freq = 0 MHz
<6>[ 850.648977] (1)mtk_wcn_cmb_sdio_on (3)
<5>[ 850.649088] (1)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[ 850.649106] (1)msdc3 -> USR Resume <- msdc_pm() : L<1691> PID
<3>[ 850.666277] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[ 850.666301] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[ 850.666318] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<3>[ 850.691499] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1761> PID
<3>[ 850.705975] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4075> PID
<3>[ 850.706015] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[ 850.706033] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[ 850.706050] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[ 850.706947] (0)[Gsensor] [FFFFFF04 FFFFFFF6 FFFFFFDC] => [ -252 -10 -36] after
<6>[ 850.708008] (0)mmc2: new high speed SDIO card at address 0001
<6>[ 850.709987] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 850.710004] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 850.710022] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 850.710035] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 850.710045] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 850.710054] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 850.710196] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[ 850.710234] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [mmc_rescan+0x0/0x2dc]dur: 60442307 > 15ms
<6>[ 850.766841] (0)[Gsensor] [FFFFFF04 FFFFFFF4 FFFFFFD7] => [ -252 -12 -41] after
<6>[ 850.805874] (1)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 850.806050] (0)[2:kthreadd] fork [4727:kthreadd]
<6>[ 850.806078] (1)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 850.806132] (1)[wlan] net_device prDev(0xc4812000) allocated
<5>[ 850.807842] (1)[wlan] Open FW image: WIFI_RAM_CODE done
<4>[ 850.808123] (1)[RT_MONITOR]WARNNING [4727:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [4727:ksdioirqd/mmc2]
<5>[ 850.812901] (1)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 850.813572] (1)[wlan] Virtual Address = e7b0f000 for COMMON MGMT MEMORY POOL.
<5>[ 850.813591] (1)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 850.813619] (1)[wlan] Virtual Address = e7b11000 for SW_RFB_T.
<5>[ 850.813633] (1)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 850.813658] (1)[wlan] Virtual Address = e7b15000 for MSDU_INFO_T.
<6>[ 850.813675] (1)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 850.825912] (1)[wlan] Chip ID: 0x6628
<6>[ 850.825928] (1)[wlan] Revision ID: 0x0
<6>[ 850.826840] (0)[Gsensor] [FFFFFF05 FFFFFFF4 FFFFFFDA] => [ -251 -12 -38] after
<6>[ 850.886968] (0)[Gsensor] [FFFFFF04 FFFFFFF5 FFFFFFD9] => [ -252 -11 -39] after
<6>[ 850.946795] (0)[Gsensor] [FFFFFF04 FFFFFFF3 FFFFFFDA] => [ -252 -13 -38] after
<6>[ 851.007067] (0)[Gsensor] [FFFFFF03 FFFFFFF6 FFFFFFDB] => [ -253 -10 -37] after
<4>[ 851.025835] (0)[cpu-0:thread:62] 2013-08-04 12:15:48.984078 UTC; android time 2013-08-04 14:15:48.984078
<4>[ 851.025855] (1)[cpu-0:thread:63] 2013-08-04 12:15:48.984082 UTC; android time 2013-08-04 14:15:48.984082
<4>[ 851.025867] (1)[WDK], local_bit:0x0, cpu:1
<4>[ 851.025872] (1)[WDK]: kick External WDT
<4>[ 851.025880] (1)[WDK], local_bit:0x2, cpu:1, check bit0x:3
<4>[ 851.025886] (1)[WDK]: cpu:1, kick local wdt
<4>[ 851.025896] (0)[WDK], local_bit:0x2, cpu:0
<4>[ 851.025905] (1)WDT mpcore_wdt_keepalive:cpu-1: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b40
<4>[ 851.025917] (1)WDT mpcore_wdt_start:cpu-1,control: 0x7, count:0x135f1b3c, load:0x135f1b40
<4>[ 851.025927] (0)[WDK]: kick External WDT
<4>[ 851.025936] (0)[WDK], local_bit:0x3, cpu:0, check bit0x:3
<4>[ 851.025945] (0)[WDK]: cpu:0, kick local wdt
<4>[ 851.025959] (0)WDT mpcore_wdt_keepalive:cpu-0: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b41
<4>[ 851.025974] (0)WDT mpcore_wdt_start:cpu-0,control: 0x7, count:0x135f1b3d, load:0x135f1b41
<6>[ 851.067002] (0)[Gsensor] [FFFFFF05 FFFFFFF4 FFFFFFDA] => [ -251 -12 -38] after
<6>[ 851.126924] (0)[Gsensor] [FFFFFF02 FFFFFFF4 FFFFFFDD] => [ -254 -12 -35] after
<6>[ 851.186892] (0)[Gsensor] [FFFFFF04 FFFFFFF3 FFFFFFDA] => [ -252 -13 -38] after
<6>[ 851.246940] (0)[Gsensor] [FFFFFF02 FFFFFFF3 FFFFFFDE] => [ -254 -13 -34] after
<6>[ 851.307041] (0)[Gsensor] [FFFFFF04 FFFFFFF3 FFFFFFDA] => [ -252 -13 -38] after
<7>[ 851.346670] (1)[4584:Thread-91] fork [4728:Thread-91]
<7>[ 851.351789] (1)[4728:Thread-91] set proc[4728] name: ->[LogSecurityThre]
<7>[ 851.353624] (1)[4584:Thread-91] exit
<7>[ 851.353784] (1)[4728:LogSecurityThre] exit
<6>[ 851.366871] (0)[Gsensor] [FFFFFF04 FFFFFFF4 FFFFFFDB] => [ -252 -12 -37] after
<6>[ 851.426779] (0)[Gsensor] [FFFFFF03 FFFFFFF4 FFFFFFDA] => [ -253 -12 -38] after
<6>[ 851.486773] (0)[Gsensor] [FFFFFF04 FFFFFFF3 FFFFFFDB] => [ -252 -13 -37] after
<6>[ 851.546780] (0)[Gsensor] [FFFFFF03 FFFFFFF4 FFFFFFDD] => [ -253 -12 -35] after
<6>[ 851.579389] (1)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 851.595846] (1)[wlan] Ready bit asserted
<7>[ 851.605884] (0)WQ_WARN: cpu:0, proc:kworker/0:2, [thermal_zone_device_check+0x0/0x18]dur: 309993077 > 15ms
<6>[ 851.606859] (0)[Gsensor] [FFFFFF05 FFFFFFF4 FFFFFFDD] => [ -251 -12 -35] after
<5>[ 851.629344] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[ 851.630639] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[ 851.630660] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 851.630707] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 851.630806] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[ 851.631167] (0)[2:kthreadd] fork [4729:kthreadd]
<5>[ 851.631206] (1)[wlan] tx_thread starts running...
<6>[ 851.666747] (0)[Gsensor] [FFFFFF03 FFFFFFF3 FFFFFFDB] => [ -253 -13 -37] after
<6>[ 851.727231] (0)[Gsensor] [FFFFFF04 FFFFFFF4 FFFFFFDA] => [ -252 -12 -38] after
<6>[ 851.733514] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 851.733567] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 851.733632] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 851.733756] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 851.733852] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 851.734357] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 851.737173] (1)[4725:loadDriverThrea] exit
<7>[ 851.749525] (0)[2:kthreadd] fork [4730:kthreadd]
<6>[ 851.750491] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 851.750521] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 851.766282] (1)WQ_WARN: cpu:1, proc:kworker/1:1, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 16834538 > 15ms
<5>[ 851.767354] (1)init: starting `wpa_supplicant`
<7>[ 851.767650] (1)[1:init] fork [4731:init]
<7>[ 851.768652] (1)[305:WifiStateMachin] fork [4732:WifiStateMachin]
<7>[ 851.768701] (0)[4732:WifiStateMachin] set proc[4732] name: ->[WifiMonitor]
<7>[ 851.776898] (0)[4731:init] set proc[4731] name: ->[logwrapper]
<7>[ 851.779141] (0)[4731:logwrapper] fork [4733:logwrapper]
<6>[ 851.786822] (0)[Gsensor] [FFFFFF04 FFFFFFF3 FFFFFFDD] => [ -252 -13 -35] after
<7>[ 851.786963] (1)[4733:logwrapper] set proc[4733] name: ->[wpa_supplicant]
<5>[ 851.826303] (0)[wlan] N=0 closed
<5>[ 851.826336] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 483300
<5>[ 851.826358] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[ 851.826869] (1)[wlan] NAF=0,0,0
<6>[ 851.827074] (1)[wlan] NAF=0,0,0
<6>[ 851.846914] (0)[Gsensor] [FFFFFF03 FFFFFFF3 FFFFFFDB] => [ -253 -13 -37] after
<7>[ 851.855036] (0)[155:netd] fork [4734:netd]
<6>[ 851.906907] (0)[Gsensor] [FFFFFF04 FFFFFFF3 FFFFFFDA] => [ -252 -13 -38] after
<7>[ 851.933088] (1)[4734:netd] exit
<6>[ 851.966817] (0)[Gsensor] [FFFFFF04 FFFFFFF4 FFFFFFD8] => [ -252 -12 -40] after
<6>[ 852.026751] (0)[Gsensor] [FFFFFF05 FFFFFFF3 FFFFFFD9] => [ -251 -13 -39] after
<5>[ 852.037082] (1)[wlan] [13] TRANSITION: [0] -> [2]
<6>[ 852.086998] (0)[Gsensor] [FFFFFF03 FFFFFFF2 FFFFFFDD] => [ -253 -14 -35] after
<7>[ 852.127008] (1)[4668:com.specdevice] exit
<5>[ 852.142871] (0)[wlan] CMD set_band=0
<6>[ 852.147207] (0)[Gsensor] [FFFFFF05 FFFFFFF3 FFFFFFDD] => [ -251 -13 -35] after
<6>[ 852.206817] (0)[Gsensor] [FFFFFF05 FFFFFFF3 FFFFFFDA] => [ -251 -13 -38] after
<6>[ 852.267138] (0)[Gsensor] [FFFFFF02 FFFFFFF5 FFFFFFDC] => [ -254 -11 -36] after
<5>[ 852.267283] (1)[wlan] [13] TRANSITION: [2] -> [0]
<6>[ 852.268268] (0)[wlan] NAF=0,0,0
<5>[ 852.275440] (1)[wlan] N=0 closed
<5>[ 852.275516] (1)[wlan] EVENT-ROAMING ABORT: Current Time = 483740
<5>[ 852.275572] (1)[wlan] [13] TRANSITION: [0] -> [0]
<5>[ 852.275634] (1)[wlan] [13] TRANSITION: [0] -> [1]
<5>[ 852.275697] (1)[wlan] [13] TRANSITION: [1] -> [6]
<5>[ 852.275759] (1)[wlan] ChReq net=0 token=1 b=1 c=7 s=0
<6>[ 852.277944] (1)[wlan] NAF=0,0,0
<5>[ 852.279762] (1)[wlan] ChGrant net=0 token=1 ch=7 sco=0
<5>[ 852.282978] (1)[wlan] [13] TRANSITION: [6] -> [7]
<5>[ 852.283128] (1)[wlan] STA 40mAllowed=0
<6>[ 852.284043] (1)[wlan] Wait Cmd TxSeqNum:1
<6>[ 852.295401] (1)[wlan] Wait Cmd TxSeqNum:2
<7>[ 852.298026] (0)[263:er.ServerThread] fork [4735:er.ServerThread]
<7>[ 852.306679] (1)[4735:er.ServerThread] set proc[4735] name: ->[SyncHandler-0]
<6>[ 852.315334] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 3 SN: 26
<6>[ 852.332849] (0)[Gsensor] [FFFFFF04 FFFFFFF3 FFFFFFDA] => [ -252 -13 -38] after
<6>[ 852.336490] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 3 SN: 27
<6>[ 852.336627] (0)[wlan] Wait Cmd TxSeqNum:3
<6>[ 852.338141] (1)[wlan] EVENT_ID_TX_DONE PacketSeq:3 ucStatus: 0 SN: 28
<6>[ 852.339952] (1)[wlan] QM: (fgIsWmmSupported=0, fgSupportQoS=1)
<6>[ 852.339969] (1)[wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=0)
<5>[ 852.339987] (1)[wlan] N=0 b=1 c=7 s=0 e=0 h=0 I=0x00 l=1 p=1
<5>[ 852.340011] (1)[wlan]
<4>[ 852.340023] (1)e0:91:53:26:b9:0a [17] TRANSITION: [0] -> [3]
<4>[ 852.340028] (1)
<5>[ 852.340070] (1)[wlan] [wifi] wlan0 netif_carrier_on [ssid:WLAN_65 e0:91:53:26:b9:0a]
<5>[ 852.340090] (1)[wlan] EVENT-ROAMING START: Current Time = 483810
<5>[ 852.340107] (1)[wlan] [27] TRANSITION: [0] -> [1]
<5>[ 852.340121] (1)[wlan] [13] TRANSITION: [7] -> [10]
<6>[ 852.340431] (1)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[ 852.345914] (1)[wlan] QM: +STA[0]
<7>[ 852.364100] (1)[305:WifiStateMachin] fork [4736:WifiStateMachin]
<7>[ 852.364283] (0)[4736:WifiStateMachin] set proc[4736] name: ->[DhcpStateMachin]
<7>[ 852.378036] (1)[4713:AsyncTask #2] fork [4737:AsyncTask #2]
<6>[ 852.386861] (0)[Gsensor] [FFFFFF03 FFFFFFF3 FFFFFFDB] => [ -253 -13 -37] after
<7>[ 852.389945] (0)[4737:AsyncTask #2] set proc[4737] name: ->[dmesg]
<6>[ 852.393144] (0)[wlan] eNetTypeIndex:0, ePwrMode:0, fgEnCmdEvent:1
<5>[ 852.393170] (0)[wlan] Set Wi-Fi PS mode to CAM (0)
<5>[ 852.395503] (1)init: starting `dhcpcd_wlan0`
<7>[ 852.395709] (1)[1:init] fork [4738:init]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1
ro.build.version.incremental=eng.shilei.wang.1361859230
ro.custom.build.version=I968.I968.02.05.F.A-V1.0.6B05Q56
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.1.9
ro.build.date=Tue Feb 26 14:16:39 CST 2013
ro.build.date.utc=1361859399
ro.build.type=user
ro.build.user=shilei.wang
ro.build.host=yatxsrv1
ro.build.tags=release-keys
ro.product.model=GT-N7102
ro.product.brand=samsung
ro.product.name=I968
ro.product.device=simcom77_twn_cu_ics2
ro.product.board=simcom77_twn_cu_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=simcom77_twn_cu_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=simcom77_twn_cu_ics2-user 4.0.4 IMM76D eng.shilei.wang.1361859230 release-keys
ro.build.fingerprint=alps/simcom77_twn_cu_ics2/simcom77_twn_cu_ics2:4.0.4/IMM76D/1361859230:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
persist.sys.timezone=Asia/Shanghai
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.ringtone=S_Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sf.lcd_density=240
wlan_mt6628 285155 0 - Live 0xbf1f7000 (P)
cfg80211 122340 0 - Live 0xbf1ce000
mtk_fm_priv 2399 0 - Live 0xbf1ca000 (P)
mtk_fm_drv 98433 1 mtk_fm_priv, Live 0xbf1aa000
mtk_stp_bt 39986 0 - Live 0xbf19d000
mtk_stp_gps 37294 0 - Live 0xbf190000
mtk_stp_uart 21589 0 - Live 0xbf187000 (P)
mtk_stp_wmt 372872 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11d000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf114000
devinfo 840 0 - Live 0xbf110000 (P)
devapc 4553 0 - Live 0xbf10b000 (P)
sec 90369 0 - Live 0xbf0ee000 (P)
vcodec_kernel_driver 28254 0 - Live 0xbf0e2000 (P)
m4u 113419 34 - Live 0xbf0bd000 (P)
ccmni 17126 0 - Live 0xbf0b4000 (P)
ccci 116351 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127258 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23618 0 - Live 0xbf054000
pvrsrvkm 233127 157 mtklfb, Live 0xbf00d000
mtk_hwe 1394 0 - Live 0xbf009000 (P)
aed 16380 3 - Live 0xbf000000 (P)
RAM: 1024 MB (997 MB available)
System RAM: 997.000MB
mtkfb.0: 5.000MB
Flash: 4 GB (3.589 GB actual); 8 GB (7.402 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 7.402 GB
Тачскрин для alps GT-N7102
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Новый аккумулятор для alps GT-N7102
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Чехлы для alps GT-N7102
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |