1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | samsung |
Модель | GT-I8190 |
Версия Andriod | 4.0.3; eng.sw03.1377246149; SDK15 |
Процессор | 2 cores; SAMSUNG GOLDEN(montblanc); Max: 1001,0 MHz; Min: 250,2 MHz |
Дисплей | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Сенсорный экран | Multitouch 2 points |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
ОЗУ | 512 MB (486 MB available) |
Память | 4 GB (3.666 GB actual); 2 GB (1.832 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM; Net: EDGE |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 4.9 MP; Max: 2560x1920; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Доп. камера | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Датчики | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3825 |
FM radio | Supported by chipset |
SD Version: | 1.1 7 |
KERNEL: Linux version 3.0.13 (sw03@work01-pc) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Fri Aug 23 16:22:18 CST 2013
CODENAME: REL
Mainboard: e958
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e958
DISPLAY: ALPS.ICS2.MP.V1.3
FINGERPRINT: samsung/e958/e958:4.0.3/IMM76D/1377246149:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : SAMSUNG GOLDEN(montblanc)
P1 : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[39828.875860] (1)[8090:dmesg] exit
<7>[39828.876095] (1)[8090:dmesg] sig 17 to [8076:AsyncTask #2]
<7>[39828.908564] (0)[294:WifiStateMachin] fork [8091:WifiStateMachin]
<7>[39828.908622] (1)[8091:WifiStateMachin] set proc[8091] name: ->[loadDriverThrea]
<6>[39828.922359] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[39828.922370] (1)[WLAN] Power on
<3>[39828.922386] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[39828.922405] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[39828.922450] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[39828.922463] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[39828.922474] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[39828.922484] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[39828.922494] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[39828.922504] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO15)
<3>[39828.922514] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(18)
<3>[39828.922525] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO17)
<3>[39828.922535] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(17)
<3>[39828.922545] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[39828.922555] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[39828.922565] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[39828.922575] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[39828.922585] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[39828.922595] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[39828.922605] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[39828.922614] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[39828.922624] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[39828.922635] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[39828.922645] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO112)
<3>[39828.922654] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[39828.922667] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[39828.922679] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[39828.922690] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[39828.922706] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[39828.922720] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[39828.941680] (0)[253:er.ServerThread] fork [8092:er.ServerThread]
<7>[39828.942602] (0)[8092:er.ServerThread] set proc[8092] name: ->[Thread-754]
<7>[39828.944289] (0)[8092:Thread-754] exit
<3>[39829.129946] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[39829.129968] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[39829.130150] (0)[STP-PSM] [E]_stp_psm_notify_stp(1147):ERROR! Invalid Action!!
<4>[39829.130156] (0)
<3>[39829.130181] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[39829.130195] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[39829.130206] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[39829.130387] (0)mtk_get_bus_freq() return 260000
<3>[39829.130563] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[39829.130575] (0)Flush type = 4 Rx Queue
<3>[39829.130709] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[39829.130724] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[39829.130737] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[39829.130747] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[39829.130757] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[39829.130772] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[39829.130782] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[39829.130794] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[39829.130805] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[39829.136405] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[39829.142036] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[39829.147652] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[39829.147667] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[39829.147682] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[39829.147697] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[39829.158609] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[39829.158624] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[39829.163581] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[39829.163598] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[39829.164142] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[39829.164156] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120727130622a
<3>[39829.164169] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[39829.164179] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[39829.164190] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[39829.164201] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[39829.164211] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<7>[39829.230566] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310387769 > 15ms
<3>[39829.297356] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 472) ok
<3>[39829.298092] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14aa80)
<3>[39829.299084] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[39829.299843] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[39829.299857] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[39829.299869] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[39829.299879] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[39829.322114] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[39829.323191] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[39829.323202] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[39829.323214] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[39829.323227] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[39829.323239] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[39829.323247] (0)board_sdio_ctrl force off before on
<6>[39829.323255] (0)mtk_wcn_cmb_sdio_off (3)
<5>[39829.323373] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[39829.323393] (0)[Power/clkmgr] [freq_meter] data = 47, freq = 0 MHz
<6>[39829.323410] (0)mtk_wcn_cmb_sdio_on (3)
<5>[39829.323522] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[39829.323540] (0)msdc3 -> USR Resume <- msdc_pm() : L<1691> PID
<3>[39829.340193] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[39829.340215] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[39829.340231] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<3>[39829.365454] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1761> PID
<3>[39829.379365] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4075> PID
<3>[39829.379403] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[39829.379420] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[39829.379436] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[39829.380457] (0)mmc2: new high speed SDIO card at address 0001
<6>[39829.382669] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[39829.382684] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[39829.382694] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[39829.382703] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[39829.382712] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[39829.382720] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[39829.382831] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[39829.382865] (0)WQ_WARN: cpu:4, proc:kworker/u:1, [mmc_rescan+0x0/0x324]dur: 58431231 > 15ms
<7>[39829.476946] (0)[8060:com.specdevice] exit
<6>[39829.479946] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[39829.480095] (1)[2:kthreadd] fork [8093:kthreadd]
<6>[39829.480112] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[39829.480147] (0)[wlan] net_device prDev(0xc7162000) allocated
<4>[39829.480462] (0)[RT_MONITOR]WARNNING [8093:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [8093:ksdioirqd/mmc2]
<5>[39829.483101] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[39829.487900] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[39829.487959] (0)[wlan] Virtual Address = e8794000 for COMMON MGMT MEMORY POOL.
<5>[39829.487974] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[39829.487998] (0)[wlan] Virtual Address = e8796000 for SW_RFB_T.
<5>[39829.488012] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[39829.489118] (0)[wlan] Virtual Address = e879a000 for MSDU_INFO_T.
<6>[39829.489140] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[39829.500007] (0)[wlan] Chip ID: 0x6628
<6>[39829.500022] (0)[wlan] Revision ID: 0x0
<5>[39829.635972] (0)[Power/Alarm] alarm_timer_triggered type 3 at 39820.058010518 (1)
<5>[39829.636518] (0)[Power/Alarm] alarm 3 set 40500.000000000
<5>[39829.637265] (0)[Power/Alarm] alarm wait (0x0)
<5>[39829.641216] (0)[Power/Alarm] alarm 3 set 39880.059000000
<5>[39829.661769] (0)[Power/Alarm] alarm 1 set 1463122380.222000000
<5>[39829.858623] (0)[Power/Alarm] alarm_timer_triggered type 1 at 1463122380.222013320 (1)
<5>[39829.859140] (0)[Power/Alarm] alarm 1 set 1463122888.540000000
<5>[39829.860799] (0)[Power/Alarm] alarm wait (0x0)
<5>[39829.880026] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<1>[39830.209929] (0)[FM_NTC | MAIN]timer --->lock, cnt=0, pid=84
<1>[39830.209954] (0)[FM_NTC | MAIN]timer <---unlock, cnt=1, pid=84
<1>[39830.209979] (0)[FM_NTC | MAIN]rds_data --->lock, cnt=0, pid=5273
<1>[39830.209991] (0)[FM_NTC | MAIN]rds_data <---unlock, cnt=1, pid=5273
<6>[39830.251524] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[39830.270016] (0)[wlan] Ready bit asserted
<5>[39830.303450] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[39830.304670] (1)[wlan] [wifi] wlan%d netif_carrier_off
<6>[39830.304692] (1)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[39830.304744] (1)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[39830.304834] (1)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[39830.305213] (1)[2:kthreadd] fork [8094:kthreadd]
<5>[39830.305335] (0)[wlan] tx_thread starts running...
<6>[39830.398542] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[39830.398558] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[39830.398585] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[39830.398640] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[39830.398675] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[39830.398869] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[39830.400842] (1)[8091:loadDriverThrea] exit
<6>[39830.413639] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[39830.413664] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[39830.430330] (0)WQ_WARN: cpu:0, proc:kworker/0:0, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 18670385 > 15ms
<5>[39830.431163] (0)init: starting `wpa_supplicant`
<7>[39830.431368] (0)[1:init] fork [8095:init]
<7>[39830.432498] (0)[294:WifiStateMachin] fork [8096:WifiStateMachin]
<7>[39830.432549] (0)[8096:WifiStateMachin] set proc[8096] name: ->[WifiMonitor]
<7>[39830.432737] (1)[8095:init] set proc[8095] name: ->[logwrapper]
<7>[39830.434736] (1)[8095:logwrapper] fork [8097:logwrapper]
<7>[39830.440701] (1)[8097:logwrapper] set proc[8097] name: ->[wpa_supplicant]
<7>[39830.539978] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310031769 > 15ms
<5>[39830.820315] (0)[wlan] N=0 closed
<5>[39830.820341] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 29253760
<5>[39830.820356] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[39830.821774] (0)[wlan] NAF=0,0,0
<6>[39830.821790] (0)[wlan] NAF=0,0,0
<7>[39831.052398] (0)[8018:peration loader] exit
<7>[39831.054993] (0)[8019:raService] idle] exit
<5>[39831.141722] (0)[wlan] [13] TRANSITION: [0] -> [2]
<5>[39831.421783] (0)[wlan] [13] TRANSITION: [2] -> [0]
<6>[39831.422951] (0)[wlan] NAF=0,0,0
<5>[39831.424057] (0)[wlan] N=0 closed
<5>[39831.424080] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 29254360
<5>[39831.424095] (0)[wlan] [13] TRANSITION: [0] -> [0]
<5>[39831.424111] (0)[wlan] [13] TRANSITION: [0] -> [1]
<5>[39831.424131] (0)[wlan] [13] TRANSITION: [1] -> [6]
<5>[39831.424147] (0)[wlan] ChReq net=0 token=1 b=1 c=1 s=0
<6>[39831.425333] (0)[wlan] NAF=0,0,0
<5>[39831.426040] (0)[wlan] ChGrant net=0 token=1 ch=1 sco=0
<5>[39831.426100] (0)[wlan] [13] TRANSITION: [6] -> [7]
<5>[39831.426131] (0)[wlan] STA 40mAllowed=1
<6>[39831.426225] (0)[wlan] Wait Cmd TxSeqNum:1
<6>[39831.427570] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[39831.430926] (0)[wlan] Wait Cmd TxSeqNum:2
<6>[39831.433020] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[39831.435044] (0)[wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[39831.435066] (0)[wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[39831.435080] (0)[wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[39831.435107] (0)[wlan] N=0 b=1 c=1 s=0 e=0 h=3 I=0x00 l=1 p=0
<5>[39831.435130] (0)[wlan]
<4>[39831.435141] (0)02:8e:39:a4:96:be [17] TRANSITION: [0] -> [3]
<4>[39831.435146] (0)
<5>[39831.435200] (0)[wlan] [wifi] wlan0 netif_carrier_on [ssid:K3 02:8e:39:a4:96:be]
<5>[39831.435219] (0)[wlan] EVENT-ROAMING START: Current Time = 29254370
<5>[39831.435236] (0)[wlan] [27] TRANSITION: [0] -> [1]
<5>[39831.435251] (0)[wlan] [13] TRANSITION: [7] -> [10]
<6>[39831.435457] (0)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[39831.437054] (0)[wlan] QM: +STA[0]
<5>[39831.439324] (0)[wlan] R1X len=113
<5>[39831.442079] (0)[wlan] T1X len=135
<5>[39831.444419] (0)[wlan] R1X len=169
<5>[39831.444809] (0)[wlan] T1X len=113
<5>[39831.448125] (0)[wlan] N=0 b=1 c=1 s=0 e=0 h=3 I=0x00 l=1 p=0
<5>[39831.458791] (0)[wlan] CMD set_band=0
<7>[39831.492796] (0)[8076:AsyncTask #2] fork [8098:AsyncTask #2]
<7>[39831.504246] (0)[8098:AsyncTask #2] set proc[8098] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.3
ro.build.version.incremental=eng.sw03.1377246149
ro.custom.build.version=V3G.13.08.23
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri Aug 23 16:25:59 CST 2013
ro.build.date.utc=1377246359
ro.build.type=user
ro.build.user=sw03
ro.build.host=work01-pc
ro.build.tags=test-keys
ro.product.model=GT-I8190
ro.product.brand=samsung
ro.product.name=e958
ro.product.device=e958
ro.product.board=e958
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e958
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e958-user 4.0.3 IMM76D eng.sw03.1377246149 test-keys
ro.build.fingerprint=samsung/e958/e958:4.0.3/IMM76D/1377246149:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.3
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=180
ril.current.share_modem=1
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=false
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mzcurlockscreen=2
doublefish.vendor.pcb.name=PCB_E958
doublefish.mtk.modem.support=modem_3g
doublefish.cust.modem=moztek77_MT6162_ICS2_RX_hspa
doublefish.gemini=no
doublefish.lcd.width=480
doublefish.lcd.height=800
doublefish.touchpanel=ft6206
doublefish.accelerometer=bma250_250e_auto
kxtf9_auto
doublefish.alsps=pstouch
doublefish.mtk.branch=MAIN2.1
doublefish.custom.verno=V3G.13.08.23
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.ringtone=Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285667 0 - Live 0xbf1fb000 (P)
cfg80211 122048 0 - Live 0xbf1d2000
mtk_fm_priv 2399 0 - Live 0xbf1ce000 (P)
mtk_fm_drv 98585 1 mtk_fm_priv, Live 0xbf1ae000
mtk_stp_bt 39986 0 - Live 0xbf1a1000
mtk_stp_gps 37294 0 - Live 0xbf194000
mtk_stp_uart 21589 1 - Live 0xbf18b000 (P)
mtk_stp_wmt 372827 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42994 0 - Live 0xbf0e2000 (P)
m4u 113415 20 - Live 0xbf0bd000 (P)
ccmni 17142 0 - Live 0xbf0b4000 (P)
ccci 117136 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127198 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23574 0 - Live 0xbf054000
pvrsrvkm 233143 89 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16376 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.666 GB actual); 2 GB (1.832 GB actual)
mmcblk0: 3.666 GB
mmcblk1: 1.832 GB
Тачскрин для samsung GT-I8190
$15.62 Tested For SAMSUNG Galaxy S3 LCD Display i9300 i8190 Touch Screen Digitizer Replacement For SAMSUNG Galaxy S3 Mini LCD Screen
$12.77 Super AMOLED LCD for SAMSUNG Galaxy S3 Mini SIII LCD Display Touch Screen Digitizer i8190 GT-i8190 i8195 i8200 With Frame+Tools
$10.55 Super AMOLED for samsung s3 mini lcd Display Touch Screen Digitizer assembly GT-i8190 i8195 i8200 screen repair Parts
$16.55 Super AMOLED Digitizer Assembly For Samsung Galaxy S3 mini lcd Display Touch Screen GT-I8190 i8190N i8195 i8200 With frame Tools
Новый аккумулятор для samsung GT-I8190
$47.7 Brand New EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$47.7 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$49.13 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$49.13 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$56.77 EB425161LU Battery for Samsung Galaxy S S2 S3 S4 S5 Mini I8190 I9500 I9300 I9100 I9190 I9000 S GT-I9070 I9 S3mini S4mini code
$6.36 XDOU Battery For SAMSUNG S10E J5 A70 Nnte 10 A8 A51 Grand DUOS S3 S6 S7 Edge S8 S9 S10 Plus GT-I8190 SM-A515 2017 J530 SM-G973
$26.27 size Battery 1500MAH EB-L1M7FLU For Mini S3 GT-I8190 I8190N I8190 GT-I8200 Smartphone Battery
$4.51 For Samsung Galaxy S3 i9300 GT-i9300 i9305 S3 MINI i8190 GT-I8190N Back Housing Cover Case Battery Cover Replacement
$6.39 EB-L1M7FLU EB-F1M7FLU 1500mAh High Quality Battery For Samsung Galaxy S3 SIII Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$47.7 Brand New EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$24.43 For SAMSUNG EB-F1M7FLU 1500mAh Battery Galaxy S3 Mini S III more GT-I8190 i8160 I8190N GT-i8200 S7562 G313 SM-G730A NEW
$47.7 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$25.77 size Battery 1500MAH EB-L1M7FLU For Mini S3 GT-I8190 I8190N I8190 GT-I8200 Smartphone Battery
$47.17 Brand New EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$4.5 Stonering EB425161LU 1700mAh Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 I8190 I739 I759 I669 I8160 S7582 J1mini
$6.46 High Quality 1500mAh EB-L1M7FLU Battery For Samsung Galaxy S3Mini S3 Mini GT-I8190 I8190N I8190 GT-I8200 Smart phone
$5.4 Replacement Battery EB425161LU For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 i759 I669 I8160 S7582 J1mini
$47.17 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$5.6 EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$47.17 Brand New EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
Чехлы для samsung GT-I8190
$3.3 Case for Samsung Galaxy S3 Mini i8190 GT-i8190 Cover Silicone Soft TPU Protective Phone Cases Coque
$2.69 For Samsung Galaxy S3 Mini i8190 GT-i8190 Cases Soft TPU Silicon Phone Back Cover S3MINI phone back Case etui bumper funda coque
$4.22 Flip Wallet Leather Case For Samsung Galaxy S3 Mini Case i8190 GT i8200 Phone Cover Hard Back i8200n 8190 i 8200 GT-I8190
$3.79 Case for Samsung Galaxy S3 Mini i8190 GT-i8190 Cover Silicone Soft TPU Protective Phone Cases Coque
$3.53 Tempered glass For Samsung Galaxy S2 plus S3 S4 S5 S6 S3 mini S4 mini S5 mini GT I9190 i8190 i9500 I9300 I9100 SM G9200 case
$4.51 For Samsung Galaxy S3 i9300 GT-i9300 i9305 S3 MINI i8190 GT-I8190N Back Housing Cover Case Battery Cover Replacement
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |