- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | e1909c_v77_jbl_5647_6628 |
Versión de Android | 4.0.4; eng.root.1348731762; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Pantalla | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (486 MB available) |
Flash | 4 GB (3.663 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM; Net: HSPA |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Cámara trasera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensores | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 4194 |
FM radio | Supported by chipset |
SD Version: | 1.1 7 |
KERNEL: Linux version 3.0.13 (root@zhangjianan-Android) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Sep 27 15:42:25 CST 2012
CODENAME: REL
Mainboard: e1909c_v77_jbl_5647_6628
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e1909c_v77_jbl_5647_6628
DISPLAY: ALPS.ICS2.MP.V1.5
FINGERPRINT: unknown
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[34912.957094] (1)[27042:dmesg] exit
<7>[34912.957366] (1)[27042:dmesg] sig 17 to [27020:AsyncTask #2]
<7>[34912.975633] (0)[27043:d.process.media] fork [27053:d.process.media]
<7>[34912.975844] (1)[27053:d.process.media] set proc[27053] name: ->[Binder Thread #]
<7>[34912.980569] (1)[27053:Binder Thread #] fork [27054:Binder Thread #]
<7>[34912.980640] (1)[27054:Binder Thread #] set proc[27054] name: ->[Binder Thread #]
<7>[34912.981402] (0)[27043:d.process.media] set proc[27043] name: ->[re-initialized>]
<7>[34913.866822] (0)WQ_WARN: cpu:0, proc:kworker/0:0, [thermal_zone_device_check+0x0/0x18]dur: 310010461 > 15ms
<7>[34914.051827] (0)[1104:WifiStateMachin] fork [27055:WifiStateMachin]
<7>[34914.051895] (1)[27055:WifiStateMachin] set proc[27055] name: ->[loadDriverThrea]
<7>[34914.151288] (0)[27043:re-initialized>] set proc[27043] name: ->[d.process.media]
<6>[34914.199236] (1)[WLAN] rfkill_set_block(blocked 0)
<6>[34914.199249] (1)[WLAN] Power on
<3>[34914.199263] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[34914.199282] (1)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[34914.199324] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[34914.199337] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[34914.199348] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[34914.199358] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[34914.199369] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[34914.199380] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO185)
<3>[34914.199390] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[34914.199401] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO184)
<3>[34914.199411] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(11)
<3>[34914.199421] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[34914.199432] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[34914.199442] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[34914.199452] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[34914.199462] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[34914.199473] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[34914.199483] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(not defined)
<3>[34914.199493] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(not defined)
<3>[34914.199503] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(not defined)
<3>[34914.199513] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[34914.199523] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[34914.199533] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[34914.199545] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[34914.199559] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[34914.199578] (1)[WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[34914.199590] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[34914.406794] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[34914.406817] (1)[WMT-PLAT][E]wmt_plat_i2s_ctrl(997):[MT662x]Error:FM digital mode set, but no I2S GPIOs defined
<3>[34914.406831] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[34914.407012] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[34914.407027] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[34914.407245] (1)mtk_get_bus_freq() return 192400
<3>[34914.407422] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[34914.407435] (1)Flush type = 4 Rx Queue
<3>[34914.407577] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[34914.407593] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[34914.407606] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[34914.407616] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[34914.407627] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[34914.407642] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[34914.407653] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[34914.407664] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[34914.407676] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[34914.413350] (1)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[34914.419021] (1)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[34914.424649] (1)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[34914.424665] (1)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[34914.424680] (1)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[34914.424695] (1)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[34914.435651] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[34914.435667] (1)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[34914.452115] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[34914.452138] (1)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[34914.579794] (1)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[34914.579817] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120727130622a
<3>[34914.579835] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[34914.579850] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[34914.579865] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[34914.579882] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[34914.579898] (1)[WMT-IC][I]mt6628_patch_dwn:===========================================
<1>[34914.646775] (0)[FM_NTC | MAIN]timer --->lock, cnt=0, pid=0
<1>[34914.646805] (0)[FM_NTC | MAIN]timer <---unlock, cnt=1, pid=0
<1>[34914.646848] (0)[FM_NTC | MAIN]rds_data --->lock, cnt=0, pid=25533
<1>[34914.646863] (0)[FM_NTC | MAIN]rds_data <---unlock, cnt=1, pid=25533
<3>[34914.714754] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 472) ok
<3>[34914.715481] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14aba0)
<3>[34914.716554] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[34914.717676] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[34914.717694] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[34914.717708] (1)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[34914.717720] (1)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[34914.738720] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[34914.739795] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[34914.739807] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[34914.739820] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[34914.739834] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[34914.739846] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[34914.739855] (0)board_sdio_ctrl force off before on
<6>[34914.739863] (0)mtk_wcn_cmb_sdio_off (3)
<5>[34914.739982] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[34914.740081] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[34914.740100] (0)mtk_wcn_cmb_sdio_on (3)
<5>[34914.740212] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[34914.740237] (0)msdc3 -> USR Resume <- msdc_pm() : L<1692> PID
<3>[34914.756970] (1)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[34914.756991] (1)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[34914.757007] (1)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<3>[34914.782309] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1762> PID
<3>[34914.797172] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4084> PID
<3>[34914.797211] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[34914.797228] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[34914.797244] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[34914.798314] (0)mmc2: new high speed SDIO card at address 0001
<6>[34914.799433] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[34914.799447] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[34914.799457] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[34914.799467] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[34914.799475] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[34914.799484] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[34914.799605] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[34914.799639] (0)WQ_WARN: cpu:4, proc:kworker/u:1, [mmc_rescan+0x0/0x324]dur: 58679846 > 15ms
<5>[34914.808297] (0)[Power/Alarm] alarm_timer_triggered type 2 at 34914.756011087 (1)
<6>[34914.896787] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[34914.896926] (0)[2:kthreadd] fork [27056:kthreadd]
<6>[34914.896961] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[34914.896973] (1)[RT_MONITOR]WARNNING [27056:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [27056:ksdioirqd/mmc2]
<5>[34914.897018] (0)[wlan] net_device prDev(0xd872f000) allocated
<5>[34914.901895] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[34914.906938] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[34914.907024] (0)[wlan] Virtual Address = e16ac000 for COMMON MGMT MEMORY POOL.
<5>[34914.907043] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[34914.907069] (0)[wlan] Virtual Address = e16ae000 for SW_RFB_T.
<5>[34914.907085] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[34914.907107] (0)[wlan] Virtual Address = e16b2000 for MSDU_INFO_T.
<6>[34914.907123] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[34914.926913] (0)[wlan] Chip ID: 0x6628
<6>[34914.926929] (0)[wlan] Revision ID: 0x0
<7>[34915.216820] (0)WQ_WARN: cpu:0, proc:kworker/0:0, [thermal_zone_device_check+0x0/0x18]dur: 350022231 > 15ms
<5>[34915.390609] (0)[Power/Alarm] alarm 2 set 34922.181000000
<5>[34915.407122] (0)[Power/Alarm] alarm wait (0x0)
<7>[34915.410694] (0)[950:er.ServerThread] fork [27057:er.ServerThread]
<7>[34915.412441] (1)[27057:er.ServerThread] set proc[27057] name: ->[Thread-914]
<7>[34915.414675] (1)[27057:Thread-914] exit
<7>[34915.466975] (0)[27043:d.process.media] fork [27058:d.process.media]
<7>[34915.467036] (1)[27058:d.process.media] set proc[27058] name: ->[Thread-1034]
<7>[34915.645222] (1)[25701:ngoroot.supersu] fork [27059:ngoroot.supersu]
<7>[34915.645330] (1)[27059:ngoroot.supersu] set proc[27059] name: ->[RxNewThreadSche]
<6>[34915.672653] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[34915.687040] (0)[wlan] Ready bit asserted
<5>[34915.737085] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[34915.738583] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[34915.738618] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[34915.738678] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[34915.740103] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[34915.740805] (0)[2:kthreadd] fork [27060:kthreadd]
<5>[34915.741360] (0)[wlan] tx_thread starts running...
<7>[34915.748718] (1)[27059:RxNewThreadSche] exit
<6>[34915.829020] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[34915.829037] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[34915.829056] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[34915.829387] (1)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[34915.829436] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[34915.829692] (1)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[34915.867960] (0)[27043:d.process.media] fork [27061:d.process.media]
<7>[34915.868239] (1)[27061:d.process.media] set proc[27061] name: ->[SharedPreferenc]
<7>[34915.969818] (0)[27055:loadDriverThrea] exit
<7>[34916.141956] (1)[27061:SharedPreferenc] exit
<6>[34916.435447] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[34916.435471] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[34916.442099] (1)[27058:Thread-1034] exit
<5>[34916.447622] (1)init: starting `wpa_supplicant`
<7>[34916.453760] (1)[1:init] fork [27062:init]
<7>[34916.508261] (0)[27062:init] set proc[27062] name: ->[logwrapper]
<7>[34916.526832] (0)WQ_WARN: cpu:0, proc:kworker/0:4, [thermal_zone_device_check+0x0/0x18]dur: 310039077 > 15ms
<7>[34916.590012] (0)[1104:WifiStateMachin] fork [27063:WifiStateMachin]
<7>[34916.592042] (1)[27063:WifiStateMachin] set proc[27063] name: ->[WifiMonitor]
<7>[34916.670675] (0)[27062:logwrapper] fork [27064:logwrapper]
<7>[34916.672847] (1)[27064:logwrapper] set proc[27064] name: ->[wpa_supplicant]
<5>[34916.937252] (1)[wlan] N=0 closed
<5>[34916.937283] (1)[wlan] EVENT-ROAMING ABORT: Current Time = 34616900
<5>[34916.937299] (1)[wlan] [13] TRANSITION: [0] -> [0]
<6>[34916.938301] (1)[wlan] NAF=0,0,0
<6>[34916.938533] (1)[wlan] NAF=0,0,0
<5>[34917.208368] (0)[wlan] [13] TRANSITION: [0] -> [2]
<7>[34917.517647] (1)[27020:AsyncTask #2] fork [27065:AsyncTask #2]
<7>[34917.532240] (1)[27065:AsyncTask #2] set proc[27065] name: ->[dmesg]
<5>[34917.559548] (1)[Power/Alarm] alarm 0 set 1601858603.065000000
<5>[34917.563405] (1)[wlan] CMD set_band=0
<7>[34917.616328] (1)[27043:d.process.media] fork [27066:d.process.media]
<7>[34917.616397] (0)[27066:d.process.media] set proc[27066] name: ->[DeleteAlbumArtT]
<7>[34917.617095] (1)[27043:d.process.media] fork [27067:d.process.media]
<7>[34917.617139] (1)[27067:d.process.media] set proc[27067] name: ->[thumbs thread]
<7>[34917.622178] (1)[27043:d.process.media] fork [27068:d.process.media]
<7>[34917.622239] (0)[27068:d.process.media] set proc[27068] name: ->[thumbs-cache-th]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.5
ro.build.version.incremental=eng.root.1348731762
ro.custom.build.version=1348731762
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2012年 09月 27日 星期四 15:45:07 CST
ro.build.date.utc=1348731907
ro.build.type=user
ro.build.user=root
ro.build.host=agold-zhangjianan-Android
ro.build.tags=test-keys
ro.product.model=e1909c_v77_jbl_5647_6628
ro.product.brand=alps
ro.product.name=e1909c_v77_jbl_5647_6628
ro.product.device=e1909c_v77_jbl_5647_6628
ro.product.board=e1909c_v77_jbl_5647_6628
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e1909c_v77_jbl_5647_6628
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e1909c_v77_jbl_5647_6628-user 4.0.4 IMM76D eng.root.1348731762 test-keys
ro.build.fingerprint=alps/e1909c_v77_jbl_5647_6628/e1909c_v77_jbl_5647_6628:4.0.4/IMM76D/1348731762:user/test-keys
ro.build.flavor=
persist.sys.timezone=
ro.build.characteristics=default
ro.build.shutdown.animation=no
ro.build.tv.location=-1
ro.build.time.format=12
ro.build.date.format=yyyy-MMM-d-EE
ro.build.ipo.setting=yes
ro.build.bluetooth.name=
ro.build.wifi.ssid=
ro.build.default.scrbrightness=128
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.5
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=pizzicato.ogg
ro.config.alarm_alert=Beeps.mp3
ro.config.ringtone=Sceptrum.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285683 0 - Live 0xbf1fb000 (P)
cfg80211 122372 0 - Live 0xbf1d2000
mtk_fm_priv 2399 0 - Live 0xbf1ce000 (P)
mtk_fm_drv 98585 1 mtk_fm_priv, Live 0xbf1ae000
mtk_stp_bt 39986 0 - Live 0xbf1a1000
mtk_stp_gps 37294 0 - Live 0xbf194000
mtk_stp_uart 21589 1 - Live 0xbf18b000 (P)
mtk_stp_wmt 373083 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42938 0 - Live 0xbf0e2000 (P)
m4u 113419 20 - Live 0xbf0bd000 (P)
ccmni 17150 0 - Live 0xbf0b4000 (P)
ccci 117400 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127170 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23602 0 - Live 0xbf054000
pvrsrvkm 233143 135 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16384 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.663 GB actual)
mmcblk0: 3.663 GB
Pantalla táctil para alps e1909c_v77_jbl_5647_6628
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
Batería de repuesto para alps e1909c_v77_jbl_5647_6628
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
Fundas para alps e1909c_v77_jbl_5647_6628
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |