- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | POV |
Modelo | _TAB-P517 |
Versión de Android | 4.0.4; eng.hede.1362994555; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1209,0 MHz; Min: 302,2 MHz |
Pantalla | 1024 x 600; DPI: 160; Evaluated Size: 7,4" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (480 MB available) |
Flash | 4 GB (3.618 GB actual); 32 GB (28.969 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: on off torch |
Cámara trasera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensores | ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
bh1620fvc Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3669 |
FM radio | Supported by chipset |
SD Version: | 1.1 7 |
KERNEL: Linux version 3.0.13 (hede@kf-mid) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Mar 11 17:35:38 HKT 2013
CODENAME: REL
Mainboard: PROTAB
BRAND: POV
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: POV_TAB-P517
DISPLAY: ALPS.ICS2.MP.V1.9
FINGERPRINT: alps/yecon77_mg789_tb_ics2/yecon77_mg789_tb_ics2:4.0.4/IMM76D/1362994555:user/test-keys
HARDWARE: mt8377
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 2406.80
processor : 1
BogoMIPS : 2413.36
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT8377
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 7028.294409] (0)[9854:dmesg] exit
<7>[ 7028.295125] (0)[9854:dmesg] sig 17 to [9852:AsyncTask #2]
<7>[ 7028.318539] (0)[305:WifiStateMachin] fork [9855:WifiStateMachin]
<7>[ 7028.319599] (1)[9855:WifiStateMachin] set proc[9855] name: ->[loadDriverThrea]
<7>[ 7028.339979] (1)[9812:ReferenceQueueD] exit
<7>[ 7028.340459] (1)[9816:FinalizerWatchd] exit
<7>[ 7028.340500] (0)[9814:FinalizerDaemon] exit
<7>[ 7028.346612] (1)[170:zygote] fork [9856:zygote]
<7>[ 7028.347945] (1)[170:zygote] fork [9857:zygote]
<7>[ 7028.350730] (0)[9856:zygote] fork [9858:zygote]
<7>[ 7028.350816] (0)[9858:zygote] set proc[9858] name: ->[GC]
<7>[ 7028.352827] (1)[9857:zygote] set proc[9857] name: ->[ReferenceQueueD]
<7>[ 7028.353381] (0)[9856:zygote] fork [9859:zygote]
<7>[ 7028.353391] (1)[170:zygote] fork [9860:zygote]
<7>[ 7028.353447] (0)[9859:zygote] set proc[9859] name: ->[Signal Catcher]
<7>[ 7028.354208] (0)[9856:zygote] fork [9861:zygote]
<7>[ 7028.354336] (0)[9861:zygote] set proc[9861] name: ->[Compiler]
<7>[ 7028.354808] (1)[9860:zygote] set proc[9860] name: ->[FinalizerDaemon]
<7>[ 7028.355501] (0)[9856:zygote] fork [9862:zygote]
<7>[ 7028.355581] (1)[170:zygote] fork [9863:zygote]
<7>[ 7028.355896] (1)[9862:zygote] set proc[9862] name: ->[ReferenceQueueD]
<7>[ 7028.356050] (0)[9863:zygote] set proc[9863] name: ->[FinalizerWatchd]
<7>[ 7028.357748] (1)[9856:zygote] fork [9864:zygote]
<7>[ 7028.358007] (1)[9864:zygote] set proc[9864] name: ->[FinalizerDaemon]
<7>[ 7028.358697] (1)[9856:zygote] fork [9865:zygote]
<7>[ 7028.359586] (1)[9865:zygote] set proc[9865] name: ->[FinalizerWatchd]
<7>[ 7028.370819] (1)[9856:zygote] set proc[9856] name: ->[ndroid.settings]
<7>[ 7028.375085] (1)[9856:ndroid.settings] fork [9866:ndroid.settings]
<7>[ 7028.375331] (0)[9866:ndroid.settings] set proc[9866] name: ->[Binder Thread #]
<7>[ 7028.375948] (0)[9866:Binder Thread #] fork [9867:Binder Thread #]
<7>[ 7028.376032] (0)[9867:Binder Thread #] set proc[9867] name: ->[Binder Thread #]
<7>[ 7028.378014] (1)[9856:ndroid.settings] set proc[9856] name: ->[re-initialized>]
<6>[ 7028.382548] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[ 7028.382561] (0)[WLAN] Power on
<3>[ 7028.382577] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 7028.383416] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 7028.383466] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 7028.384593] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 7028.385369] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 7028.386106] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(GPIO149)
<3>[ 7028.386875] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 7028.388507] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO107)
<3>[ 7028.391949] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(13)
<3>[ 7028.393283] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO104)
<6>[ 7028.394559] (0)[Power/Battery] [upmu_is_chr_det] No charger
<3>[ 7028.394609] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(10)
<3>[ 7028.395449] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 7028.396252] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 7028.397180] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 7028.398024] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 7028.398802] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 7028.399838] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 7028.400698] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 7028.402257] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[ 7028.403641] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO187)
<3>[ 7028.404527] (1)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 7028.405624] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 7028.406493] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 7028.407313] (1)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[ 7028.418503] (1)[260:er.ServerThread] fork [9868:er.ServerThread]
<7>[ 7028.420572] (1)[9868:er.ServerThread] set proc[9868] name: ->[Thread-652]
<7>[ 7028.424456] (1)[9868:Thread-652] exit
<7>[ 7028.436998] (1)[9856:re-initialized>] set proc[9856] name: ->[ndroid.settings]
<7>[ 7028.608752] (1)[9841:Thread-756] exit
<3>[ 7028.609650] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 7028.610455] (0)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 7028.612109] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 7028.613098] (0)[STP-PSM] [E]_stp_psm_notify_stp(1147):ERROR! Invalid Action!!
<4>[ 7028.613104] (0)
<3>[ 7028.614219] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 7028.615378] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 7028.622140] (0)mtk_get_bus_freq() return 166833
<7>[ 7028.622762] (1)[9848:Thread-758] exit
<3>[ 7028.622967] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 7028.624599] (0)Flush type = 4 Rx Queue
<3>[ 7028.626086] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 7028.626925] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 7028.626941] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 7028.627621] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 7028.628367] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 7028.629132] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 7028.629144] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 7028.629154] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 7028.629164] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 7028.635147] (1)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 7028.641605] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[ 7028.648226] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[ 7028.649201] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[ 7028.650586] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[ 7028.651837] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 7028.668040] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 7028.669581] (1)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 7028.737504] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 7028.738312] (1)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<7>[ 7028.799560] (0)WQ_WARN: cpu:0, proc:kworker/0:3, [thermal_zone_device_check+0x0/0x18]dur: 369965462 > 15ms
<3>[ 7028.810270] (1)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 7028.811289] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120727130622a
<3>[ 7028.812262] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 7028.813096] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 7028.813930] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 7028.814763] (1)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[ 7028.816118] (1)[WMT-IC][I]mt6628_patch_dwn:===========================================
<7>[ 7028.860551] (0)[440:iatek.bluetooth] fork [9869:iatek.bluetooth]
<7>[ 7028.860608] (1)[9869:iatek.bluetooth] set proc[9869] name: ->[BtFtpServiceThr]
<6>[ 7028.894786] (0)[Power/Battery] [upmu_is_chr_det] No charger
<3>[ 7028.954151] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 472) ok
<3>[ 7028.955621] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14ad58)
<3>[ 7028.957047] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 7028.958193] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 7028.958205] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 7028.958216] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 7028.958225] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 7028.971438] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[ 7028.973050] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 7028.973805] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 7028.975443] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 7028.975467] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 7028.975484] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 7028.976219] (0)board_sdio_ctrl force off before on
<6>[ 7028.976230] (0)mtk_wcn_cmb_sdio_off (3)
<5>[ 7028.976358] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[ 7028.977297] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[ 7028.978121] (0)mtk_wcn_cmb_sdio_on (3)
<5>[ 7028.978240] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<3>[ 7028.979061] (0)msdc3 -> USR Resume <- msdc_pm() : L<1719> PID
<3>[ 7028.999703] (1)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<3>[ 7029.000780] (1)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<981> PID
<3>[ 7029.002466] (1)msdc3 -> ================ <- msdc_set_mclk() : L<982> PID
<3>[ 7029.025509] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1789> PID
<3>[ 7029.041944] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4117> PID
<3>[ 7029.043200] (0)msdc3 -> ================ <- msdc_set_mclk() : L<979> PID
<3>[ 7029.044315] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<981> PID
<3>[ 7029.046052] (0)msdc3 -> ================ <- msdc_set_mclk() : L<982> PID
<6>[ 7029.052623] (0)mmc2: new high speed SDIO card at address 0001
<6>[ 7029.057878] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 7029.057918] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 7029.057951] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 7029.057980] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 7029.058007] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 7029.058035] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 7029.058279] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[ 7029.058372] (0)WQ_WARN: cpu:4, proc:kworker/u:1, [mmc_rescan+0x0/0x324]dur: 76423538 > 15ms
<6>[ 7029.139585] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 7029.139944] (0)[2:kthreadd] fork [9870:kthreadd]
<6>[ 7029.140033] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[ 7029.140075] (1)[RT_MONITOR]WARNNING [9870:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [9870:ksdioirqd/mmc2]
<5>[ 7029.140114] (0)[wlan] net_device prDev(0xc4533000) allocated
<5>[ 7029.145187] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 7029.154974] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 7029.155927] (0)[wlan] Virtual Address = e14f4000 for COMMON MGMT MEMORY POOL.
<5>[ 7029.157488] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 7029.158236] (0)[wlan] Virtual Address = e14f6000 for SW_RFB_T.
<5>[ 7029.158969] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 7029.160176] (0)[wlan] Virtual Address = e14fa000 for MSDU_INFO_T.
<6>[ 7029.160927] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 7029.179921] (1)[wlan] Chip ID: 0x6628
<6>[ 7029.179938] (1)[wlan] Revision ID: 0x0
<6>[ 7029.395007] (0)[Power/Battery] [upmu_is_chr_det] No charger
<5>[ 7029.404807] (1)init: starting `getuuid`
<7>[ 7029.405517] (1)[1:init] fork [9871:init]
<7>[ 7029.406383] (1)[9871:init] set proc[9871] name: ->[uuid]
<7>[ 7029.408568] (1)[9871:uuid] exit
<7>[ 7029.408724] (1)[9871:uuid] sig 17 to [1:init]
<5>[ 7029.408922] (1)init: process `getuuid`, pid 9871 exited
<5>[ 7029.409612] (1)init: process `getuuid` killing any children in process group
<6>[ 7029.895210] (0)[Power/Battery] [upmu_is_chr_det] No charger
<6>[ 7029.918194] (1)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 7029.969686] (0)[wlan] Ready bit asserted
<5>[ 7029.998623] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[ 7030.000227] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[ 7030.001154] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 7030.001209] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 7030.001284] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[ 7030.003768] (0)[2:kthreadd] fork [9872:kthreadd]
<5>[ 7030.003811] (1)[wlan] tx_thread starts running...
<6>[ 7030.096278] (1)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 7030.096325] (1)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 7030.096381] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 7030.097986] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 7030.098776] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 7030.100055] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 7030.103168] (1)[9855:loadDriverThrea] exit
<7>[ 7030.109665] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310093539 > 15ms
<6>[ 7030.141220] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 7030.141248] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[ 7030.160570] (1)init: starting `wpa_supplicant`
<7>[ 7030.161390] (1)[1:init] fork [9873:init]
<7>[ 7030.162136] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan_mt6628]]dur: 20685384 > 15ms
<7>[ 7030.163214] (0)[9873:init] set proc[9873] name: ->[logwrapper]
<7>[ 7030.165553] (0)[9873:logwrapper] fork [9874:logwrapper]
<7>[ 7030.170563] (1)[9874:logwrapper] set proc[9874] name: ->[wpa_supplicant]
<5>[ 7030.249843] (0)[wlan] N=0 closed
<5>[ 7030.250244] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 6691450
<5>[ 7030.251029] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[ 7030.253331] (0)[wlan] NAF=0,0,0
<6>[ 7030.254102] (1)[wlan] NAF=0,0,0
<7>[ 7030.261304] (0)[305:WifiStateMachin] fork [9875:WifiStateMachin]
<7>[ 7030.261511] (1)[9875:WifiStateMachin] set proc[9875] name: ->[WifiMonitor]
<6>[ 7030.395495] (0)[Power/Battery] [upmu_is_chr_det] No charger
<5>[ 7030.413713] (1)[wlan] [13] TRANSITION: [0] -> [2]
<4>[ 7030.609580] (1)[cpu-0:thread:65] 2015-12-07 17:09:47.841223 UTC; android time 2015-12-07 18:09:47.841223
<4>[ 7030.610767] (1)[WDK], local_bit:0x0, cpu:1
<4>[ 7030.611267] (1)[WDK]: kick External WDT
<4>[ 7030.611748] (1)[WDK], local_bit:0x2, cpu:1, check bit0x:3
<4>[ 7030.612417] (1)[WDK]: cpu:1, kick local wdt
<4>[ 7030.612950] (1)WDT mpcore_wdt_keepalive:cpu-1: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b40
<4>[ 7030.614258] (1)WDT mpcore_wdt_start:cpu-1,control: 0x7, count:0x135f1b3c, load:0x135f1b40
<4>[ 7030.619527] (0)[cpu-0:thread:64] 2015-12-07 17:09:47.851189 UTC; android time 2015-12-07 18:09:47.851189
<4>[ 7030.620703] (0)[WDK], local_bit:0x2, cpu:0
<4>[ 7030.621209] (0)[WDK]: kick External WDT
<4>[ 7030.621688] (0)[WDK], local_bit:0x3, cpu:0, check bit0x:3
<4>[ 7030.622359] (0)[WDK]: cpu:0, kick local wdt
<4>[ 7030.622892] (0)WDT mpcore_wdt_keepalive:cpu-0: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b41
<4>[ 7030.624186] (0)WDT mpcore_wdt_start:cpu-0,control: 0x7, count:0x135f1b3d, load:0x135f1b41
<5>[ 7030.686487] (0)[wlan] CMD set_band=0
<5>[ 7030.779801] (1)[wlan] [13] TRANSITION: [2] -> [0]
<6>[ 7030.783897] (0)[wlan] NAF=0,0,0
<5>[ 7030.784667] (0)[wlan] N=0 closed
<5>[ 7030.785077] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 6691980
<5>[ 7030.785833] (0)[wlan] [13] TRANSITION: [0] -> [0]
<5>[ 7030.786421] (0)[wlan] [13] TRANSITION: [0] -> [1]
<5>[ 7030.787010] (0)[wlan] [13] TRANSITION: [1] -> [6]
<5>[ 7030.788192] (0)[wlan] ChReq net=0 token=1 b=1 c=6 s=3
<6>[ 7030.798056] (0)[wlan] NAF=0,0,0
<5>[ 7030.798843] (0)[wlan] ChGrant net=0 token=1 ch=6 sco=3
<5>[ 7030.799617] (0)[wlan] [13] TRANSITION: [6] -> [7]
<5>[ 7030.800221] (0)[wlan] STA 40mAllowed=1
<6>[ 7030.800755] (0)[wlan] Wait Cmd TxSeqNum:1
<6>[ 7030.801989] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[ 7030.802866] (0)[wlan] Wait Cmd TxSeqNum:2
<6>[ 7030.804873] (0)[wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[ 7030.806696] (0)[wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[ 7030.806715] (0)[wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[ 7030.806726] (0)[wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[ 7030.806750] (0)[wlan] N=0 b=1 c=6 s=3 e=0 h=2 I=0x0f l=1 p=0
<5>[ 7030.808145] (1)[wlan]
<4>[ 7030.808414] (1)8c:04:ff:bd:a1:26 [17] TRANSITION: [0] -> [3]
<4>[ 7030.808419] (1)
<5>[ 7030.812100] (1)[wlan] [wifi] wlan0 netif_carrier_on [ssid:rumpus1 8c:04:ff:bd:a1:26]
<5>[ 7030.813064] (1)[wlan] EVENT-ROAMING START: Current Time = 6692010
<5>[ 7030.813831] (1)[wlan] [27] TRANSITION: [0] -> [1]
<5>[ 7030.814406] (1)[wlan] [13] TRANSITION: [7] -> [10]
<6>[ 7030.815475] (1)ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<5>[ 7030.816702] (1)[wlan] QM: +STA[0]
<5>[ 7030.820459] (1)[wlan] QM:Event +RxBa
<5>[ 7030.820896] (1)[wlan] QM: +RxBA(STA=0 TID=0 WinStart=0 WinEnd=11 WinSize=12)
<5>[ 7030.823190] (1)[wlan] R1X len=135
<5>[ 7030.827396] (0)[wlan] T1X len=135
<6>[ 7030.827883] (0)[wlan] QM:(BAR)(0)(1){1,12}
<5>[ 7030.829052] (1)[wlan] N=0 b=1 c=6 s=3 e=0 h=2 I=0x0f l=1 p=0
<5>[ 7030.852103] (0)[wlan] R1X len=193
<5>[ 7030.852895] (0)[wlan] T1X len=113
<7>[ 7030.869450] (1)[305:WifiStateMachin] fork [9876:WifiStateMachin]
<7>[ 7030.869544] (0)[9876:WifiStateMachin] set proc[9876] name: ->[DhcpStateMachin]
<6>[ 7030.895820] (0)[Power/Battery] [upmu_is_chr_det] No charger
<6>[ 7030.901562] (1)[wlan] eNetTypeIndex:0, ePwrMode:0, fgEnCmdEvent:1
<5>[ 7030.901586] (1)[wlan] Set Wi-Fi PS mode to CAM (0)
<5>[ 7030.903090] (1)init: starting `dhcpcd_wlan0`
<7>[ 7030.903847] (1)[1:init] fork [9877:init]
<7>[ 7030.904462] (0)[9877:init] set proc[9877] name: ->[logwrapper]
<7>[ 7030.906750] (0)[9877:logwrapper] fork [9878:logwrapper]
<7>[ 7030.908902] (1)[9845:com.specdevice] exit
<7>[ 7030.909967] (1)[9878:logwrapper] set proc[9878] name: ->[dhcpcd]
<7>[ 7030.928382] (1)[9879:dhcpcd] set proc[9879] name: ->[dhcpcd-run-hook]
<7>[ 7030.928555] (1)[9878:dhcpcd] fork [9879:dhcpcd-run-hook]
<5>[ 7030.931528] (0)[wlan] N=0 b=1 c=6 s=3 e=0 h=2 I=0x0f l=1 p=0
<7>[ 7030.938894] (1)[9879:dhcpcd-run-hook] fork [9880:dhcpcd-run-hook]
<7>[ 7030.940787] (1)[9880:dhcpcd-run-hook] set proc[9880] name: ->[ls]
<7>[ 7030.953059] (1)[9880:ls] exit
<7>[ 7030.953318] (1)[9880:ls] sig 17 to [9879:dhcpcd-run-hook]
<7>[ 7030.954113] (1)[9879:dhcpcd-run-hook] fork [9881:dhcpcd-run-hook]
<7>[ 7030.957343] (1)[9881:dhcpcd-run-hook] set proc[9881] name: ->[ls]
<7>[ 7030.961500] (1)[9881:ls] exit
<7>[ 7030.961859] (1)[9881:ls] sig 17 to [9879:dhcpcd-run-hook]
<7>[ 7030.963048] (0)[9852:AsyncTask #2] fork [9882:AsyncTask #2]
<4>[ 7030.963438] (0)[MDPK W]: MT6577_MDP_Flush(): FLUSH() by different process. owner:0, current = ( process, pid, tgid ) = ( AsyncTask #2, 9882, 9882 ) Rsc=0x00000000
<7>[ 7030.966351] (1)[9879:dhcpcd-run-hook] fork [9883:dhcpcd-run-hook]
<7>[ 7030.967159] (1)[9883:dhcpcd-run-hook] set proc[9883] name: ->[ls]
<7>[ 7030.970244] (1)[9883:ls] exit
<7>[ 7030.970429] (1)[9883:ls] sig 17 to [9879:dhcpcd-run-hook]
<7>[ 7030.972541] (1)[9879:dhcpcd-run-hook] fork [9884:dhcpcd-run-hook]
<7>[ 7030.975822] (0)[9882:AsyncTask #2] set proc[9882] name: ->[dmesg]
<7>[ 7030.976094] (1)[9884:dhcpcd-run-hook] set proc[9884] name: ->[setprop]
# begin build properties
# autogenerated by buildinfo.sh
sys.project.fat.path=/dev/block/mmcblk0p6
sys.project.fat.volume=Protab
ro.custom.bluetooth.name=POV_TAB-P517
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.9
ro.build.version.incremental=eng.hede.1362994555
ro.custom.build.version=1362994555
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Mon Mar 11 17:36:55 HKT 2013
ro.build.date.utc=1362994615
ro.build.type=user
ro.custom.speaker.on=yes
ro.build.user=hede
ro.build.host=kf-mid
ro.build.tags=test-keys
ro.product.model=POV_TAB-P517
ro.product.brand=POV
ro.product.name=PROTAB
ro.product.device=POV_TAB-P517
ro.product.board=PROTAB
ro.product.cpu.abi=armeabi-v7a
ro.custom.inputmethod = com.android.inputmethod.latin.LatinIME
ro.custom.homepage = http://www.google.com
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=POV
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=yecon77_mg789_tb_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=yecon77_mg789_tb_ics2-user 4.0.4 IMM76D eng.hede.1362994555 test-keys
ro.build.fingerprint=alps/yecon77_mg789_tb_ics2/yecon77_mg789_tb_ics2:4.0.4/IMM76D/1362994555:user/test-keys
ro.build.flavor=
ro.build.characteristics=tablet
ro.custom.flash=no
ro.product.model=MID
ro.custom.id=QLMG705D-B001-03
ro.build.time=20130313.173655
DEFAULT 0001
ro.product.hdmiSupport=yes
ro.hw.id=273
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.9
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
mediatek.wlan.channelselect=1
ro.sf.lcd_density=160
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
#ipo
sys.ipo.tbl=1
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=270
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 276914 0 - Live 0xbf1fb000 (P)
cfg80211 122096 0 - Live 0xbf1d2000
mtk_fm_priv 2399 0 - Live 0xbf1ce000 (P)
mtk_fm_drv 98537 1 mtk_fm_priv, Live 0xbf1ae000
mtk_stp_bt 39986 0 - Live 0xbf1a1000
mtk_stp_gps 37294 0 - Live 0xbf194000
mtk_stp_uart 21589 1 - Live 0xbf18b000 (P)
mtk_stp_wmt 373652 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42938 0 - Live 0xbf0e2000 (P)
m4u 113423 20 - Live 0xbf0bd000 (P)
ccmni 17150 0 - Live 0xbf0b4000 (P)
ccci 117408 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127174 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23578 0 - Live 0xbf054000
pvrsrvkm 233143 95 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16384 3 - Live 0xbf000000 (P)
RAM: 512 MB (480 MB available)
System RAM: 480.000MB
mtkfb.0: 10.000MB
Flash: 4 GB (3.618 GB actual); 32 GB (28.969 GB actual)
mmcblk0: 3.618 GB
mmcblk1: 28.969 GB
Pantalla táctil para POV _TAB-P517
$3.29 POV/Vlog Smartphone Neck Holder Bracket for Phtotgraphy Live Video Recording Selfie Mount Kit for Iphone Samsung Gopro DJI Osmo
$6.71 Vamson 360°Rotary Backpack Clip Mobile Phone Mount First Person Pov View Chest Shoulder Horizontal Vertical Shooting Bracket
$32.77 Wearable Neck Phone Holder POV Photographing Vlog Mount Wearable Mount Tripod Flexible Neck Holder for iPhone Samsung
$33.08 Electronic DIY Kit POV Rotate Fingertip Gyro DIY Soldering Kit Colorful Diode Electronic Training Set Fidget Spinner Welding Kit
$5.62 Caseoh Aapestry POV You Will Be Banned Flags Meme Tapestry Funny Tapestrys Room Decor Aesthetic Tapestries Bedroom Wall Stickers
$1.83 LED Rotating Gyroscope DIY Kit SMD Soldering POV Rotation Colorful Diode Luminous Training Gyroscope Kit Soldering Practice Kit
$12.43 Car Phone Holder for Video Recording Articulated Cellphone Support for Mobile Filming Pov Telephone Iphone Car Seat Mount Stand
$43.06 POV Vlog Smartphone Selfie Neck Holder Hands Free Wearable Lazy Phone Stand Universal Hanging Mount for IPhone GoPro Dock racket
$12.48 Vehicle Car Mobile Cell Phone POV Stand Holder Articulated Video Recording Telephone Support Mount for Iphone Car Filming
$14.89 Car Phone Holder for Mobile Cellphone First View POV Video Recording Smartphone Stand Support in Moto for Iphone Samsung Xiaomi
$177.38 51 Single-chip Rotating LED Display POV Creative DIY Kit Advertising
$4.92 Mobile Phone Neck Hanging Holders POV/Vlog Video Recording & Filming Neck Mount for Self-timer Accessories
$171.19 Magnetic POV/Vlog Phone Neck Mount Holder for iPhone 15/14/13/12 Pro Mini/Plus/Pro/Pro Max, Hand Free Chest Stand Video Record
$5.19 Mobile Phone Neck Hanging Holders POV/Vlog Video Recording & Filming Neck Mount for iPhone Sasmung Mi Self-timer Accessories New
$32.82 LED POV Rotation Colorful Diode Luminous SMD Soldering Fidget Spinner Kit Training Gyroscope Kit Soldering Practice
$34.04 Neck Phone Holder POV Photographing Vlog Selfie Wearable Mount Stand Tripods Flexible Mobile Phone Holder Hanging Neck
$21.65 Rotating LED Display Color POV Creative DIY Advertising Confession Artifact Decoration Display Promotion Electronic Products
$207.84 Magnetic Neck Mount Quick Release Neck Cell Phone Holder POV Vlog Necklace Lanyard Holder Smart Phone Accessories
$32.13 Magsafe magnetic holder POV Tiktok UP anchor tiktok food shooting a neck bracket to control the mobile phone holder
Batería de repuesto para POV _TAB-P517
$6.71 Vamson 360°Rotary Backpack Clip Mobile Phone Mount First Person Pov View Chest Shoulder Horizontal Vertical Shooting Bracket
$5.62 Caseoh Aapestry POV You Will Be Banned Flags Meme Tapestry Funny Tapestrys Room Decor Aesthetic Tapestries Bedroom Wall Stickers
$1.83 LED Rotating Gyroscope DIY Kit SMD Soldering POV Rotation Colorful Diode Luminous Training Gyroscope Kit Soldering Practice Kit
$33.08 Electronic DIY Kit POV Rotate Fingertip Gyro DIY Soldering Kit Colorful Diode Electronic Training Set Fidget Spinner Welding Kit
$32.77 Wearable Neck Phone Holder POV Photographing Vlog Mount Wearable Mount Tripod Flexible Neck Holder for iPhone Samsung
$3.29 POV/Vlog Smartphone Neck Holder Bracket for Phtotgraphy Live Video Recording Selfie Mount Kit for Iphone Samsung Gopro DJI Osmo
$12.43 Car Phone Holder for Video Recording Articulated Cellphone Support for Mobile Filming Pov Telephone Iphone Car Seat Mount Stand
$43.06 POV Vlog Smartphone Selfie Neck Holder Hands Free Wearable Lazy Phone Stand Universal Hanging Mount for IPhone GoPro Dock racket
$12.48 Vehicle Car Mobile Cell Phone POV Stand Holder Articulated Video Recording Telephone Support Mount for Iphone Car Filming
$14.89 Car Phone Holder for Mobile Cellphone First View POV Video Recording Smartphone Stand Support in Moto for Iphone Samsung Xiaomi
$5.19 Mobile Phone Neck Hanging Holders POV/Vlog Video Recording & Filming Neck Mount for iPhone Sasmung Mi Self-timer Accessories New
$177.38 51 Single-chip Rotating LED Display POV Creative DIY Kit Advertising
$21.65 Rotating LED Display Color POV Creative DIY Advertising Confession Artifact Decoration Display Promotion Electronic Products
$34.04 Neck Phone Holder POV Photographing Vlog Selfie Wearable Mount Stand Tripods Flexible Mobile Phone Holder Hanging Neck
$32.82 LED POV Rotation Colorful Diode Luminous SMD Soldering Fidget Spinner Kit Training Gyroscope Kit Soldering Practice
$171.19 Magnetic POV/Vlog Phone Neck Mount Holder for iPhone 15/14/13/12 Pro Mini/Plus/Pro/Pro Max, Hand Free Chest Stand Video Record
$4.92 Mobile Phone Neck Hanging Holders POV/Vlog Video Recording & Filming Neck Mount for Self-timer Accessories
$32.13 Magsafe magnetic holder POV Tiktok UP anchor tiktok food shooting a neck bracket to control the mobile phone holder
$207.84 Magnetic Neck Mount Quick Release Neck Cell Phone Holder POV Vlog Necklace Lanyard Holder Smart Phone Accessories
Fundas para POV _TAB-P517
$33.08 Electronic DIY Kit POV Rotate Fingertip Gyro DIY Soldering Kit Colorful Diode Electronic Training Set Fidget Spinner Welding Kit
$6.71 Vamson 360°Rotary Backpack Clip Mobile Phone Mount First Person Pov View Chest Shoulder Horizontal Vertical Shooting Bracket
$32.77 Wearable Neck Phone Holder POV Photographing Vlog Mount Wearable Mount Tripod Flexible Neck Holder for iPhone Samsung
$5.62 Caseoh Aapestry POV You Will Be Banned Flags Meme Tapestry Funny Tapestrys Room Decor Aesthetic Tapestries Bedroom Wall Stickers
$1.83 LED Rotating Gyroscope DIY Kit SMD Soldering POV Rotation Colorful Diode Luminous Training Gyroscope Kit Soldering Practice Kit
$3.29 POV/Vlog Smartphone Neck Holder Bracket for Phtotgraphy Live Video Recording Selfie Mount Kit for Iphone Samsung Gopro DJI Osmo
$12.43 Car Phone Holder for Video Recording Articulated Cellphone Support for Mobile Filming Pov Telephone Iphone Car Seat Mount Stand
$43.06 POV Vlog Smartphone Selfie Neck Holder Hands Free Wearable Lazy Phone Stand Universal Hanging Mount for IPhone GoPro Dock racket
$12.48 Vehicle Car Mobile Cell Phone POV Stand Holder Articulated Video Recording Telephone Support Mount for Iphone Car Filming
$14.89 Car Phone Holder for Mobile Cellphone First View POV Video Recording Smartphone Stand Support in Moto for Iphone Samsung Xiaomi
$171.19 Magnetic POV/Vlog Phone Neck Mount Holder for iPhone 15/14/13/12 Pro Mini/Plus/Pro/Pro Max, Hand Free Chest Stand Video Record
$34.04 Neck Phone Holder POV Photographing Vlog Selfie Wearable Mount Stand Tripods Flexible Mobile Phone Holder Hanging Neck
$21.65 Rotating LED Display Color POV Creative DIY Advertising Confession Artifact Decoration Display Promotion Electronic Products
$32.82 LED POV Rotation Colorful Diode Luminous SMD Soldering Fidget Spinner Kit Training Gyroscope Kit Soldering Practice
$177.38 51 Single-chip Rotating LED Display POV Creative DIY Kit Advertising
$32.13 Magsafe magnetic holder POV Tiktok UP anchor tiktok food shooting a neck bracket to control the mobile phone holder
$207.84 Magnetic Neck Mount Quick Release Neck Cell Phone Holder POV Vlog Necklace Lanyard Holder Smart Phone Accessories
$5.19 Mobile Phone Neck Hanging Holders POV/Vlog Video Recording & Filming Neck Mount for iPhone Sasmung Mi Self-timer Accessories New
$4.92 Mobile Phone Neck Hanging Holders POV/Vlog Video Recording & Filming Neck Mount for Self-timer Accessories
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |