Freescale A10-4core 规格

一般信息
操作系统的详细信息
CPU信息
图形处理器细节
WiFi内核信息
build.prop
的内核模块
存储器映射

一般规格
生产厂家	Freescale
型号	A10-4core
Android版	4.0.4; eng.root.20120921.111102; SDK15
中央处理单元	4 cores; Freescale i.MX 6Quad Richtechie Board imx6
显示	1280 x 800; DPI: 160; Evaluated Size: 9.4"
触摸屏	Multitouch 5 points
图形处理器	GC2000 Graphics Engine; Vivante Corporation; OpenGL ES-CM 1.1; OpenGL ES 2.0
内存RAM	789 MB
快闪记忆体	16 GB Build-in (14.837 GB actual); 16 GB (14.629 GB actual)
沟通
电话	None
WiFi	wlan; IEEE 802.11 b/g/n; RealtekRTL8188/92; AP Mode
USB主机	Yes
蓝牙	Yes
全球定位系统	Yes
高级功能
前置摄像头	Photo: 0.3 MP; Max: 640x480; Focus: auto; Flash modes: off
背照相机	Photo: 0.3 MP; Max size: 640x480; Focus: auto; Flash modes: off
传感器	MMA 3-axis Accelerometer (Freescale Semiconductor Inc.); range: 0...19.613; resolution: 0.01 (0.049%); power: 0.3mA;
	MAG3110 3-axis Magnetic field sensor (Freescale Semiconductor Inc.); range: 0...1500; resolution: 0.05 (0.003%); power: 0.5mA;
	MPL3115 Pressure sensor (Freescale Semiconductor Inc.); range: 0...1100; resolution: 0.002 (0%); power: 0.35mA;
	ISL29023 Light sensor (Intersil); range: 0...16000; resolution: 1 (0.006%); power: 0.35mA;
震动模式	Yes
支持的语言	40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
电池	Technology: null; Voltage: 4
SD Version:	1.1 5

KERNEL: Linux version 3.0.35-02345-g411d6f6-dirty (root@richtechie-amd64) (gcc version 4.4.3 (GCC) ) #709 SMP PREEMPT Wed Oct 17 14:20:28 CST 2012
CODENAME: REL
Mainboard: RICHTECHIE
BRAND: Freescale
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: richtechie_6dq
DISPLAY: R13.4-rc2 V1.58b
FINGERPRINT: unknown
HARDWARE: freescale
ID: R13.4-rc2
TAGS: test-keys

Processor : ARMv7 Processor rev 10 (v7l)
processor : 0
BogoMIPS : 790.52
processor : 1
BogoMIPS : 790.52
processor : 2
BogoMIPS : 790.52
processor : 3
BogoMIPS : 790.52
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : Freescale i.MX 6Quad Richtechie Board
Revision : 63012
Serial : 0000000000000000

GL_OES_compressed_ETC1_RGB8_texture
GL_OES_compressed_paletted_texture
GL_OES_EGL_image
GL_OES_depth24
GL_OES_element_index_uint
GL_OES_fbo_render_mipmap
GL_OES_fragment_precision_high
GL_OES_rgb8_rgba8
GL_OES_stencil1
GL_OES_stencil4
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_get_program_binary
GL_EXT_texture_format_BGRA8888
GL_IMG_read_format
GL_EXT_blend_minmax
GL_EXT_read_format_bgra
GL_EXT_multi_draw_arrays
GL_APPLE_texture_format_BGRA8888
GL_APPLE_texture_max_level
GL_ARM_rgba8
GL_EXT_frag_depth
GL_VIV_shader_binary
GL_VIV_timestamp
GL_OES_mapbuffer
GL_OES_EGL_image_external
GL_EXT_discard_framebuffer
GL_OES_vertex_type_10_10_10_2
GL_EXT_texture_type_2_10_10_10_REV
GL_EXT_texture_filter_anisotropic

<4>+rtw_drv_halt
<4>##########rtw_suspend_lock_uninit###########
<6>usbcore: deregistering interface driver rtl8192cu
<4>###=> usb_read_port_complete => urb status(-108)
<4>+rtw_dev_remove
<4>rtw_unregister_early_suspend
<4>rtw_sta_flush
<4>===> rtw_dev_unload
<4>usb_read_port_cancel
<4>usb_write_port_cancel
<4>###> rtw_cmd_thread break.................
<4>rtw_cmd_thread: leaving... check & free all cmd_obj resources
<4>rtw_cmd_thread: leaving... call up terminate_cmdthread_sema
<4>==> rtl8192cu_hal_deinit
<4>bkeepfwalive(0)
<4>card disble HWSM...........
<4><=== rtw_dev_unload
<4>+r871xu_dev_remove, hw_init_completed=0
<4>free_recv_skb_queue not empty, 4
<4>rtw_unregister_early_suspend
<4>=====> rtl8192c_free_hal_data =====
<4><===== rtl8192c_free_hal_data =====
<4>rtw_wdev_free
<4>rtw_wdev_free, scan abort when device remove
<4>rtw_cfg80211_indicate_scan_done without scan req
<4>usb attached..., try to reset usb device
<6>usb 2-1: reset high speed USB device number 2 using fsl-ehci
<4>-r871xu_dev_remove, done
<4>-rtw_drv_halt
<4>==================rtw_drv_halt
<6>usb 2-1: USB disconnect, device number 2
<4>========================rtw_drv_entry
<6>usb 2-1: new high speed USB device number 3 using fsl-ehci
<4>rtw driver version=v3.4.3_4369.20120622
<4>Build at: Aug 27 2012 01:14:54
<4>##########rtw_suspend_lock_init ###########
<4>register rtw_netdev_ops to netdev_ops
<4>rtw_wdev_alloc
<4>CHIP TYPE: RTL8188C_8192C
<4>
<4>usb_endpoint_descriptor(0):
<4>bLength=7
<4>bDescriptorType=5
<4>bEndpointAddress=81
<4>wMaxPacketSize=200
<4>bInterval=0
<4>RT_usb_endpoint_is_bulk_in = 1
<4>
<4>usb_endpoint_descriptor(1):
<4>bLength=7
<4>bDescriptorType=5
<4>bEndpointAddress=2
<4>wMaxPacketSize=200
<4>bInterval=0
<4>RT_usb_endpoint_is_bulk_out = 2
<4>
<4>usb_endpoint_descriptor(2):
<4>bLength=7
<4>bDescriptorType=5
<4>bEndpointAddress=3
<4>wMaxPacketSize=200
<4>bInterval=0
<4>RT_usb_endpoint_is_bulk_out = 3
<4>
<4>usb_endpoint_descriptor(3):
<4>bLength=7
<4>bDescriptorType=5
<4>bEndpointAddress=84
<4>wMaxPacketSize=40
<4>bInterval=1
<4>RT_usb_endpoint_is_int_in = 4, Interval = 1
<4>nr_endpoint=4, in_num=2, out_num=2
<4>
<4>USB_SPEED_HIGH
<4>Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.
<4>RF_Type is 3!!
<4>EEPROM type is E-FUSE
<4>====> ReadAdapterInfo8192C
<4>Boot from EFUSE, Autoload OK !
<4>EEPROMVID = 0x0bda
<4>EEPROMPID = 0x8176
<4>EEPROMCustomerID : 0x00
<4>EEPROMSubCustomerID: 0x00
<4>RT_CustomerID: 0x00
<4>_ReadMACAddress MAC Address from EFUSE = 00:e7:a6:56:80:71
<4>EEPROMRegulatory = 0x0
<4>_ReadBoardType(0)
<4>BT Coexistance = disable
<4>RT_ChannelPlan: 0x02
<4>_ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
<4>### PS params=> power_mgnt(0),usbss_enable(1) ###
<4>### AntDivCfg(0)
<4>readAdapterInfo_8192CU(): REPLACEMENT = 1
<4><==== ReadAdapterInfo8192C in 170 ms
<4>rtw_register_early_suspend
<4>
<4> padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
<4>
<4> padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
<4>rtw_macaddr_cfg MAC Address = 00:e7:a6:56:80:71
<4>MAC Address from pnetdev->dev_addr= 00:e7:a6:56:80:71
<4>bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<6>usbcore: registered new interface driver rtl8192cu
<4>rtw_android_priv_cmd: Android private cmd "BLOCK 1" on wlan0
<4>cfg80211_rtw_change_iface call netdev_open
<4>+871x_drv - drv_open, bup=0
<4> ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
<4>FirmwareDownload92C accquire FW from embedded image
<4>fw_ver=v80, fw_subver=0, sig=0x88c0
<4>fw download ok!
<4>Set RF Chip ID to RF_6052 and RF type to 1T1R.
<4>IQK:Start!!!
<4>Path A IQK Success!!
<4>Path A IQK Success!!
<4>IQK: final_candidate is 0
<4>IQK: RegE94=102 RegE9C=d RegEA4=fe RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
<4> Path A IQ Calibration Success !
<4>pdmpriv->TxPowerTrackControl = 1
<4>MAC Address from REG_MACID = 00:e7:a6:56:80:71
<4>rtl8192cu_hal_init in 670ms
<4>MAC Address = 00:e7:a6:56:80:71
<4>rtw_cfg80211_init_wiphy:rf_type=3
<4>-871x_drv - drv_open, bup=1
<4>cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<4>+871x_drv - drv_open, bup=1
<4>-871x_drv - drv_open, bup=1
<4>cfg80211_rtw_set_power_mgmt
<6>ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>cfg80211_rtw_flush_pmksa
<4>cfg80211_rtw_change_station
<4>cfg80211_rtw_change_station
<4>cfg80211_rtw_change_station
<4>rtw_android_priv_cmd: Android private cmd "P2P_DEV_ADDR" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "BLOCK 0" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "SCAN-ACTIVE" on wlan0
<4>rtw_android_priv_cmd: Android private cmd "SCAN-PASSIVE" on wlan0

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=R13.4-rc2
ro.build.display.id=R13.4-rc2 V1.58b
ro.build.version.incremental=eng.root.20120921.111102
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Fri Sep 21 13:32:46 CST 2012
ro.build.date.utc=1348205566
ro.build.type=user
ro.build.user=root
ro.build.host=richtechie-amd64
ro.build.tags=test-keys
ro.product.model=A10-4core
ro.product.brand=Freescale
ro.product.name=richtechie_6dq
ro.product.device=richtechie_6dq
ro.product.board=RICHTECHIE
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Freescale
ro.product.locale.language=zh
ro.product.locale.region=CN
persist.sys.timezone=Asia/Shanghai
ro.wifi.channels=
ro.board.platform=imx6
# ro.build.product is obsolete; use ro.product.device
ro.build.product=richtechie_6dq
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=richtechie_6dq-user 4.0.4 R13.4-rc2 eng.root.20120921.111102 test-keys
ro.build.fingerprint=Freescale/richtechie_6dq/richtechie_6dq:4.0.4/R13.4-rc2/eng.root.20120921.111102:user/test-keys
ro.build.characteristics=default
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

wlan 596911 0 - Live 0xbf0af000

RAM: 789 MB

imx-ipuv3.0: 4.000MB
imx-ipuv3.1: 4.000MB
System RAM: 576.000MB
galcore managed memory: 192.000MB
System RAM: 213.000MB
mxc_sdc_fb.1: 28.000MB
mxc_sdc_fb.0: 15.000MB

Flash: 16 GB Build-in (14.837 GB actual); 16 GB (14.629 GB actual)

mmcblk0: 14.837 GB
mmcblk1: 14.629 GB

触摸屏为 Freescale A10-4core

新电池 Freescale A10-4core

占地面积 Freescale A10-4core

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description: