1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | alps |
Модель | IQ255 |
Версия Andriod | 2.3.6; eng.user.1342401952; SDK10 |
Процессор | 1 core; ARMv7 Processor rev 10 (v7l) |
Дисплей | 480 x 320; DPI: 160; Evaluated Size: 3,6" |
Сенсорный экран | Multitouch 5 points |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
ОЗУ | 512 MB (500 MB available) |
Память | 16 GB (14.837 GB actual); 0.5 GB (0.472 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM, Dual SIM; Net: GPRS |
WiFi | lca_core; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 3.1 MP; Max: 2048x1536; Focus: infinity; Flash modes: auto on off torch |
Доп. камера | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Датчики | BMA250 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
CM3607 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,13mA; | |
Вибратор | Yes |
Языки | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3838 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (user@user-OptiPlex-990) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Mon Jul 16 09:25:40 CST 2012
CODENAME: REL
Mainboard: tinnoes75_s8052
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: tinnoes75_s8052
DISPLAY: ALPS.GB2.MP.V2.P6
FINGERPRINT: alps/tinnoes75_s8052/tinnoes75_s8052:2.3.6/GRK39F/1342401952:eng/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[42139.836911] [9250:BinderThd_AP199] fork [13188:BinderThd_AP199]
<7>[42139.847425] [13188:BinderThd_AP199] set proc[13188] name: -> [executeAppTrans]
<7>[42139.851597] [13188:executeAppTrans] exit
<7>[42139.855038] [1314:GTalkConnWorker] fork [13189:GTalkConnWorker]
<7>[42139.856329] [10213:MediaScannerSer] exit
<7>[42139.863043] [13189:GTalkConnWorker] set proc[13189] name: -> [close-XMPP-conn]
<6>[42139.874998] [RTlog delete] fib_netdev_event() wlan0 NETDEV_DOWN!
<6>[42139.879164] [WLAN] rfkill_set_block(blocked 1)
<6>[42139.879175] [WLAN] Power off
<3>[42139.879196] [WCN_CMN/WMT] mtk_wcn_wmt_func_off:after wake_lock(1), enter_counter(1)
<3>[42139.880137] [WCN_CMN/WMT] mtk_wcn_wmt_func_off:enter_counter(1)
<3>[42139.880888] [WCN_CMN/STP] _stp_psm_disable: _stp_psm_disable
<3>[42139.881608] [WCN_CMN/STP] _stp_psm_proc: lxop_get_opid = 1, STP_OPID_WAKEUP, remaining count = *0*
<3>[42139.882714] [WCN_CMN/STP] _stp_psm_set_state: work_state = INACT --> INACT_ACT
<3>[42139.883745] [WCN_CMN/STP] _stp_psm_notify_wmt: wakeup +wake_lock(0)
<3>[42139.885263] [WCN_CMN/STP] _stp_psm_notify_wmt: wakeup +wake_lock(1)#
<3>[42139.886784] [WCN_CMN/STP] _stp_psm_notify_wmt: mt_combo_plt_exit_deep_idle++
<3>[42139.887977] [WCN_CMN/STP] _stp_psm_notify_wmt: mt_combo_plt_exit_deep_idle--
<3>[42139.888872] [WCN_CMN/WMT] **** Send wakeup command
<3>[42139.889808] [WCN_CMN/WMT] Send wakeup command OK!
<3>[42139.890386] [WCN_CMN/WMT] Do STP-CB! 2 bf05667c
<3>[42139.894293] [WCN_CMN/STP] _stp_psm_set_state: work_state = INACT_ACT --> ACT
<7>[42139.947891] [10200:Signal Catcher] sig 17 to [94:zygote]
<7>[42139.949119] [10856:Smack Packet Re] sig 13 to [10856:Smack Packet Re]
<7>[42139.981961] [13189:close-XMPP-conn] exit
<7>[42139.983738] [10856:Smack Packet Re] exit
<3>[42139.993256] [WCN_CMN/HIF] hif_sdio_wifi_off: ()
<7>[42139.993832] [10535:ksdioirqd/mmc1] exit
<7>[42139.994197] [9090:atterydoctor_en] fork [13190:atterydoctor_en]
<3>[42139.994279] [WCN_CMN/HIF] hif_sdio_wifi_off: sdio_release_irq ret=0
<5>[42139.995057] [wlan] Remove wlan!
<5>[42139.995485] [wlan]
<1>[42139.995710] tx_thread should stop now...
<5>[42139.996223] [wlan] mtk_sdiod stops
<7>[42139.996647] [10540:tx_thread] exit
<5>[42139.996702] [wlan] mtk_sdiod stopped
<7>[42140.000970] [13190:atterydoctor_en] set proc[13190] name: -> [Thread-39]
<7>[42140.021995] [13190:Thread-39] exit
<6>[42140.033442] [wlan] QM: Enter qmFlushRxQueues()
<6>[42140.033881] [wlan] QM: Enter qmFlushTxQueues()
<5>[42140.033956] [wlan] Number of Stalled Packets = 0
<5>[42140.034520] [wlan] unregistering netdev (0xc389b000)
<7>[42140.036572] [235:NativeDaemonCon] fork [13191:NativeDaemonCon]
<7>[42140.043254] [13191:NativeDaemonCon] set proc[13191] name: -> [Thread-338]
<7>[42140.045352] [13191:Thread-338] exit
<5>[42140.293203] [wlan] unregistration completed
<4>[42140.293789] [WCN_CMN/CMB] mt_combo_sdio_ctrl:mt_combo_sdio_ctrl: force set sdio port to (3)
<5>[42140.294818] [WCN_CMN/CMB] combo_sdio_off:combo_sdio_off (3)
<5>[42140.295521] [WCN_CMN/CMB] combo_sdio_off:combo_sdio_off(PM_EVENT_USER_SUSPEND, 0xc0321150, 0xde642dc0)
<3>[42140.296695] msdc3 -> USR Suspend <- msdc_pm() : L<1103> PID
<3>[42140.297597] [WCN_CMN/HIF] hif_sdio_remove:
<3>[42140.301960] [WCN_CMN/HIF] hif_sdio_remove: sdio func(0xd67bc080) is removed successfully!
<4>[42140.304494] mmc1: card 0001 removed--Liu
<7>[42140.319107] [5:khelper] fork [13192:khelper]
<3>[42140.323211] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2852> PID
<3>[42140.324324] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<661> PID
<3>[42140.325876] [WCN_CMN/WMT] wmt_core:Fun(3) [POWER_OFF] and power down chip
<3>[42140.326716] [WCN_CMN/STP] mtk_wcn_stp_ready: value(0)
<3>[42140.327341] [WCN_CMN/STP] mtk_wcn_stp_enable: (0)
<3>[42140.327928] [WCN_CMN/STP] mtk_wcn_stp_register_event_cb: Flush type = 4 Rx Queue
<7>[42140.329031] [13192:khelper] fork [13193:khelper]
<7>[42140.329090] [13193:khelper] exit
<7>[42140.329113] [13193:khelper] sig 17 to [13192:khelper]
<7>[42140.329154] [13192:khelper] exit
<7>[42140.329289] [5:khelper] fork [13194:khelper]
<7>[42140.329334] [13194:khelper] fork [13195:khelper]
<7>[42140.329374] [13195:khelper] exit
<7>[42140.329393] [13195:khelper] sig 17 to [13194:khelper]
<7>[42140.329509] [5:khelper] fork [13196:khelper]
<7>[42140.329525] [13194:khelper] exit
<7>[42140.329577] [13196:khelper] fork [13197:khelper]
<7>[42140.329610] [13197:khelper] exit
<7>[42140.329626] [13197:khelper] sig 17 to [13196:khelper]
<7>[42140.329887] [10542:wpa_supplicant] exit
<7>[42140.330294] [10542:wpa_supplicant] sig 17 to [1:init]
<3>[42140.330481] init: untracked pid 10542 exited
<7>[42140.331033] [13196:khelper] exit
<3>[42140.343394] [WCN_CMN/WMT] wmt_lib_ctrl_host_cmd:str(close_stp) result(0)
<3>[42140.344224] [WCN_CMN/WMT] wmt_lib_conf_file_deinit:sizeof(pWmtDev->cWmtcfgName) = 256
<3>[42140.345197] [WCN_CMN/STP] _stp_psm_reset: _stp_psm_reset
<3>[42140.345856] [WCN_CMN/STP] _stp_psm_reset: reset-wake_lock(1)
<3>[42140.346564] [WCN_CMN/STP] _stp_psm_reset: reset-wake_lock(0)
<3>[42140.347269] [WCN_CMN/STP] _stp_psm_set_state: work_state = ACT --> ACT
<5>[42140.348077] [WCN_CMN/CMB] mt6620_power_off:[mt6620] power off
<5>[42140.348794] [WCN_CMN/CMB] mt_combo_audio_ctrl_ex:CHIP_E2 PCM/I2S pin_separate configruation
<5>[42140.349841] [WCN_CMN/CMB] combo_audio_pin_conf:combo_audio_pin_conf, state = [0]
<5>[42140.350764] [WCN_CMN/CMB] combo_fm_i2s_pin_off:[mt6620]warnning:fm analog input mode is set, combo_fm_i2s_pin_off should not be called.
<5>[42140.352278] [WCN_CMN/CMB] mt_combo_audio_ctrl_ex:cmb_audio_ctrl_cb = bf0b0444, clt_ctrl= 0
<5>[42140.353722] [WCN_CMN/CMB] mt_combo_audio_ctrl_ex:audio_ctrl [1]->[0] ret(0, 1)
<6>[42140.354613] [mt6620] pull down sd3 bus (GPIO89~GPIO94)
<5>[42140.354623] [WCN_CMN/CMB] mt6620_power_off:[mt6620]not to rtc_gpio_disable_32k(RTC_GPIO_USER_GPS)
<3>[42140.355743] [WCN_CMN/WMT] wmt_core: WMT [POWER_OFF]
<3>[42140.356362] [WCN_CMN/STP] mtk_wcn_stp_psm_enable: STP Not Ready, Dont do Sleep/Wakeup
<3>[42140.357329] [WCN_CMN/WMT] mtk_wcn_wmt_func_off:after wake_unlock(0), enter_counter(0)
<3>[42140.358299] [WCN_CMN/WMT] mtk_wcn_wmt_func_off:enter_counter(0)
<6>[42140.375564] yaffs: userdata sync do_checkpoint 0,gc_urgen 1
<6>[42140.375576] yaffs: userdata yaffs_FlushSuperBlock 0
<7>[42140.464764] [6782:logcat] sig 13 to [6782:logcat]
<7>[42140.464824] [6782:logcat] sig 13 to [6782:logcat]
<7>[42140.464866] [6782:logcat] sig 13 to [6782:logcat]
<7>[42140.466183] [6782:logcat] sig 13 to [6782:logcat]
<7>[42140.466239] [6782:logcat] sig 13 to [6782:logcat]
<7>[42140.471426] [6782:logcat] sig 13 to [6782:logcat]
<7>[42140.473664] [212:er.ServerThread] fork [13198:er.ServerThread]
<7>[42140.493256] [13198:er.ServerThread] set proc[13198] name: -> [Thread-339]
<7>[42140.499340] [13198:Thread-339] exit
<7>[42140.504675] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[42140.506715] [10545:WifiWatchdogThr] exit
<7>[42140.508324] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[42140.643398] [10855:Smack Packet Wr] exit
<7>[42141.005483] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[42141.005822] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[42142.511984] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[42142.523453] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[42143.228091] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[42143.231820] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[42143.323752] [13186:dmesg] exit
<7>[42143.324208] [13186:dmesg] sig 17 to [13161:AsyncTask #1]
<6>[42143.411342] [WLAN] rfkill_set_block(blocked 0)
<6>[42143.411353] [WLAN] Power on
<3>[42143.411374] [WCN_CMN/WMT] mtk_wcn_wmt_func_on:after wake_lock(1), enter_counter(1)
<3>[42143.412305] [WCN_CMN/WMT] mtk_wcn_wmt_func_on:enter_counter(1)
<3>[42143.413032] [WCN_CMN/STP]
<7>[42143.423304] [6782:logcat] sig 13 to [6782:logcat]
<7>[42143.423367] [6782:logcat] sig 13 to [6782:logcat]
<7>[42143.423410] [6782:logcat] sig 13 to [6782:logcat]
<7>[42143.423943] [6782:logcat] sig 13 to [6782:logcat]
<7>[42143.423996] [6782:logcat] sig 13 to [6782:logcat]
<7>[42143.430838] [6782:logcat] sig 13 to [6782:logcat]
<7>[42143.431979] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<4>[42143.441798] mtk_wcn_stp_psm_disable: STP Not Ready, Dont do Sleep/Wakeup
<5>[42143.442654] [WCN_CMN/CMB] mt6620_print_pin_configure:[MT6620_PIN]=>GPIO pin configuration start<=
<5>[42143.443802] [WCN_CMN/CMB] mt6620_print_pin_configure:LDO_EN(GPIO124)
<5>[42143.444582] [WCN_CMN/CMB] mt6620_print_pin_configure:PMU_EN(GPIO122)
<5>[42143.445372] [WCN_CMN/CMB] mt6620_print_pin_configure:PMU28_EN(GPIO149)
<5>[42143.446184] [WCN_CMN/CMB] mt6620_print_pin_configure:GPS_LNA_PIN(GPIO112)
<5>[42143.447043] [WCN_CMN/CMB] mt6620_print_pin_configure:RST(GPIO59)
<5>[42143.447778] [WCN_CMN/CMB] mt6620_print_pin_configure:ALL_EINT(GPIO17)
<5>[42143.448580] [WCN_CMN/CMB] mt6620_print_pin_configure:BGF_EINT(GPIO13)
<5>[42143.449381] [WCN_CMN/CMB] mt6620_print_pin_configure:BGF_EINT_NUM(14)
<5>[42143.450183] [WCN_CMN/CMB] mt6620_print_pin_configure:WIFI_EINT(GPIO15)
<5>[42143.450995] [WCN_CMN/CMB] mt6620_print_pin_configure:WIFI_EINT_NUM(18)
<5>[42143.451807] [WCN_CMN/CMB] mt6620_print_pin_configure:UART_RX(GPIO79)
<5>[42143.452598] [WCN_CMN/CMB] mt6620_print_pin_configure:UART_TX(GPIO71)
<7>[42143.453633] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<5>[42143.472968] [WCN_CMN/CMB] mt6620_print_pin_configure:DAICLK(GPIO63)
<5>[42143.473780] [WCN_CMN/CMB] mt6620_print_pin_configure:PCMOUT(GPIO62)
<5>[42143.474559] [WCN_CMN/CMB] mt6620_print_pin_configure:PCMIN(GPIO64)
<5>[42143.475327] [WCN_CMN/CMB] mt6620_print_pin_configure:PCMSYNC(GPIO65)
<5>[42143.476118] [WCN_CMN/CMB] mt6620_print_pin_configure:fm analog input mode is set, no need to set I2S pins
<5>[42143.477310] [WCN_CMN/CMB] mt6620_print_pin_configure:[MT6620_PIN]=>GPIO pin configuration end<=
<5>[42143.478396] [WCN_CMN/CMB] mt6620_power_on:[mt6620] pull up sd3 bus (GPIO89~GPIO94)
<5>[42143.479336] [WCN_CMN/CMB] mt6620_power_on:[mt6620]not to rtc_gpio_enable_32k(RTC_GPIO_USER_GPS)
<5>[42143.683209] [WCN_CMN/CMB] mt_combo_audio_ctrl_ex:CHIP_E2 PCM/I2S pin_separate configruation
<5>[42143.684252] [WCN_CMN/CMB] combo_audio_pin_conf:combo_audio_pin_conf, state = [1]
<5>[42143.685174] [WCN_CMN/CMB] combo_fm_i2s_pin_off:[mt6620]warnning:fm analog input mode is set, combo_fm_i2s_pin_off should not be called.
<5>[42143.686688] [WCN_CMN/CMB] mt_combo_audio_ctrl_ex:cmb_audio_ctrl_cb = bf0b0444, clt_ctrl= 0
<5>[42143.687717] [WCN_CMN/CMB] mt_combo_audio_ctrl_ex:audio_ctrl [0]->[1] ret(0, 1)
<3>[42143.688792] [WCN_CMN/WMT] wmt_psm_pwr_sv_task:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<3>[42143.689855] [WCN_CMN/STP] _stp_psm_notify_stp(926):ERROR! Invalid Action!!
<4>[42143.690169]
<5>[42143.690897] [WCN_CMN/CMB] mt6620_power_on:[mt6620] power on
<3>[42143.693235] [WCN_CMN/WMT] wmt_lib_conf_file_init:/system/etc/firmware/WMT.cfg ok (data:0xe9f93000, size:673 bytes)
<3>[42143.695172] [WCN_CMN/WMT] wmt_lib_conf_parse:#0(coex_wmt_ant_mode)=>0x3
<3>[42143.696188] [WCN_CMN/WMT] wmt_lib_conf_parse:#1(coex_wmt_wifi_time_ctl)=>0x0
<3>[42143.697224] [WCN_CMN/WMT] wmt_lib_conf_parse:#2(coex_wmt_ext_pta_dev_on)=>0x0
<3>[42143.698262] [WCN_CMN/WMT] wmt_lib_conf_parse:#3(coex_bt_rssi_upper_limit)=>0xd2
<3>[42143.699313] [WCN_CMN/WMT] wmt_lib_conf_parse:#4(coex_bt_rssi_mid_limit)=>0xc8
<3>[42143.700334] [WCN_CMN/WMT] wmt_lib_conf_parse:#5(coex_bt_rssi_lower_limit)=>0xba
<3>[42143.701428] [WCN_CMN/WMT] wmt_lib_conf_parse:#6(coex_bt_pwr_high)=>0x5
<3>[42143.702395] [WCN_CMN/WMT] wmt_lib_conf_parse:#7(coex_bt_pwr_mid)=>0x5
<3>[42143.703465] [WCN_CMN/WMT] wmt_lib_conf_parse:#8(coex_bt_pwr_low)=>0x5
<3>[42143.704440] [WCN_CMN/WMT] wmt_lib_conf_parse:#9(coex_wifi_rssi_upper_limit)=>0xd2
<3>[42143.705525] [WCN_CMN/WMT] wmt_lib_conf_parse:#10(coex_wifi_rssi_mid_limit)=>0xc8
<3>[42143.706588] [WCN_CMN/WMT] wmt_lib_conf_parse:#11(coex_wifi_rssi_lower_limit)=>0xbf
<3>[42143.707664] [WCN_CMN/WMT] wmt_lib_conf_parse:#12(coex_wifi_pwr_high)=>0xa
<3>[42143.708638] [WCN_CMN/WMT] wmt_lib_conf_parse:#13(coex_wifi_pwr_mid)=>0xa
<3>[42143.709599] [WCN_CMN/WMT] wmt_lib_conf_parse:#14(coex_wifi_pwr_low)=>0xa
<3>[42143.710561] [WCN_CMN/WMT] wmt_lib_conf_parse:#15(coex_ext_pta_hi_tx_tag)=>0x6
<3>[42143.711572] [WCN_CMN/WMT] wmt_lib_conf_parse:#16(coex_ext_pta_hi_rx_tag)=>0x6
<3>[42143.712584] [WCN_CMN/WMT] wmt_lib_conf_parse:#17(coex_ext_pta_lo_tx_tag)=>0xc
<3>[42143.718311] [WCN_CMN/WMT] wmt_lib_conf_parse:#18(coex_ext_pta_lo_rx_tag)=>0xc
<3>[42143.719437] [WCN_CMN/WMT] wmt_lib_conf_parse:#19(coex_ext_pta_sample_t1)=>0xa
<3>[42143.720509] [WCN_CMN/WMT] wmt_lib_conf_parse:#20(coex_ext_pta_sample_t2)=>0x4
<3>[42143.721552] [WCN_CMN/WMT] wmt_lib_conf_parse:#21(coex_ext_pta_wifi_bt_con_trx)=>0x0
<3>[42143.722648] [WCN_CMN/WMT] wmt_lib_conf_parse:#22(coex_misc_ext_pta_on)=>0x0
<3>[42143.723770] [WCN_CMN/WMT] wmt_lib_conf_parse:#23(coex_misc_ext_feature_set)=>0xffffffff
<3>[42143.724944] [WCN_CMN/WMT] wmt_lib_conf_parse:#24(wmt_gps_lna_pin)=>0x0
<3>[42143.725906] [WCN_CMN/WMT] wmt_lib_conf_parse:#25(wmt_gps_lna_enable)=>0x1
<3>[42143.726752] [WCN_CMN/WMT] wmt_lib_conf_file_init:/system/etc/firmware/WMT.cfg release ok
<4>[42143.727875] mt6575_get_bus_freq() return 192400
<3>[42143.728566] [WCN_CMN/WMT] wmt_lib_ctrl_host_cmd:str(open_stp) result(0)
<3>[42143.729381] [WCN_CMN/STP] mtk_wcn_stp_register_event_cb: Flush type = 4 Rx Queue
<3>[42143.733801] [WCN_CMN/WMT] wmt_lib_ctrl_host_cmd:str(baud_115200_0) result(0)
<3>[42143.734676] [WCN_CMN/STP] mtk_wcn_stp_enable: (0)
<3>[42143.735427] [WCN_CMN/STP] mtk_wcn_stp_ready: value(0)
<3>[42143.736046] [WCN_CMN/STP] mtk_wcn_stp_set_mode: g_mtkstp_mode_flag = 00000002
<3>[42143.736944] [WCN_CMN/STP] mtk_wcn_stp_enable: (1)
<3>[42143.748115] [WCN_CMN/WMT] wmt_lib_ctrl_host_cmd:str(baud_4000000_0) result(0)
<3>[42143.748998] [WCN_CMN/WMT] wmt_core: change baudrate(4000000) ok
<3>[42143.751538] [WCN_CMN/WMT] wmt_core: read chip version
<3>[42143.752711] [WCN_CMN/WMT] wmt_core: chk read addr ok
<3>[42143.753362] [WCN_CMN/WMT] wmt_core: read chip version<== 0x8a11
<3>[42143.754091] [WCN_CMN/WMT] wmt_core: **read chip version<== 0x8a11 == WMT_CTRL
<3>[42143.754976] [WCN_CMN/WMT] wmt_core:patch fragment size(1000).
<3>[42143.755696] [WCN_CMN/WMT] mtk_wcn_wmt_hwver_get:*pWmtDevCtx->combo_ver.hw_ver = 8a11
<3>[42143.756654] [WCN_CMN/WMT] mtk_wcn_wmt_hwver_get:*Get Combo Hw Version, OK , ver = 3
<3>[42143.763258] [WCN_CMN/WMT] wmt_lib_is_file_exist(1255):valid file(/system/etc/firmware/mt6620_patch_e3_hdr.bin), length(38796)
<3>[42143.764682] [WCN_CMN/WMT] wmt_lib_ctrl_patch_get:use updated patch(/system/etc/firmware/mt6620_patch_e3_hdr.bin)
<3>[42143.769028] [WCN_CMN/WMT] wmt_lib_ctrl:CTRL_GET_PATCH ok: name(/system/etc/firmware/mt6620_patch_hdr.bin) size(38796)
<3>[42143.770354] [WCN_CMN/WMT] ===========================================
<3>[42143.771154] [WCN_CMN/WMT] [Combo Patch] Built Time = 20120221182935
<3>[42143.771945] [WCN_CMN/WMT] [Combo Patch] Hw Ver = 0x8a10
<3>[42143.772594] [WCN_CMN/WMT] [Combo Patch] Sw Ver = 0x8a10
<3>[42143.773814] [WCN_CMN/WMT] [Combo Patch] Ph Ver = 0x001e
<3>[42143.774455] [WCN_CMN/WMT] [Combo Patch] Platform = 50MP
<3>[42143.775104] [WCN_CMN/WMT] ===========================================
<3>[42144.064551] [WCN_CMN/WMT] wmt_core: patch dwn:0 frag(39, 768) ok
<3>[42144.065729] [WCN_CMN/WMT] wmt_core: WMT_CTRL_GET_WMT_CONF<== 0xdf90d064
<3>[42144.066551] [WCN_CMN/WMT] wmt_genconf:0x3 0x0 0x0 0xd2 0xc8 0xba 0x5 0x5 0x5 0xd2 0xc8 0xbf 0xa 0xa 0xa 0x6 0x6 0xc 0xc 0xa 0x4 0x0 0x0 0xffffffff
<4>[42144.066862]
<4>[42144.068382] coex_wmt len=8
<4>[42144.068705] 0x01 0x10 0x04 0x00 0x01 0x03 0x00 0x00 --end
<4>[42144.069377] coex_bt len=15
<4>[42144.069712] 0x01 0x10 0x0b 0x00 0x02 0x00 0x00 0x00 0x00 0xd2 0xc8 0xba 0x05 0x05 0x05 --end
<4>[42144.070763] coex_wifi len=16
<4>[42144.071120] 0x01 0x10 0x0c 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0xd2 0xc8 0xbf 0x0a 0x0a 0x0a --end
<4>[42144.072243] coex_ext_pta len=14
<4>[42144.072633] 0x01 0x10 0x0a 0x00 0x04 0x06 0x06 0x0c 0x0c 0x00 0x0a 0x00 0x04 0x00 --end
<4>[42144.073640] coex_misc len=13
<4>[42144.073996] 0x01 0x10 0x09 0x00 0x05 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff --end
<3>[42144.085174] [WCN_CMN/WMT] wmt_core: wmt_stp_init_coex ok
<3>[42144.085829] [WCN_CMN/WMT] wmt_core: ** bd_set<== 0x0 **
<3>[42144.086476] [WCN_CMN/WMT] ===========================================
<3>[42144.087278] [WCN_CMN/WMT] [Connectivity Combo] Chip Version MT6620E4
<3>[42144.088068] [WCN_CMN/WMT] ===========================================
<3>[42144.088870] [WCN_CMN/WMT] wmt_core: => Don`t enable clock gating<=
<3>[42144.090062] [WCN_CMN/STP] mtk_wcn_stp_set_mode: g_mtkstp_mode_flag = 00000001
<3>[42144.090951] [WCN_CMN/STP] mtk_wcn_stp_enable: (1)
<3>[42144.091538] [WCN_CMN/WMT] wmt_core: enable host STP-UART-FULL mode
<3>[42144.104516] [WCN_CMN/WMT] wmt_core: set fm mode (2)
<3>[42144.105696] [WCN_CMN/WMT] wmt_core: set fm mode <=
<3>[42144.106286] [WCN_CMN/STP] mtk_wcn_stp_ready: value(1)
<3>[42144.106913] [WCN_CMN/WMT] wmt_core: WMT [FUNC_ON]
<4>[42144.107498] [WCN_CMN/CMB] mt_combo_sdio_ctrl:mt_combo_sdio_ctrl: force set sdio port to (3)
<5>[42144.108536] [WCN_CMN/CMB] mt_combo_sdio_ctrl:mt_combo_sdio_ctrl force off before on
<5>[42144.109489] [WCN_CMN/CMB] combo_sdio_off:combo_sdio_off (3)
<5>[42144.110193] [WCN_CMN/CMB] combo_sdio_off:combo_sdio_off(PM_EVENT_USER_SUSPEND, 0xc0321150, 0xde642dc0)
<5>[42144.111385] [WCN_CMN/CMB] combo_sdio_on:combo_sdio_on (3)
<5>[42144.112056] [WCN_CMN/CMB] combo_sdio_on:combo_sdio_pm_cb(PM_EVENT_USER_RESUME, 0xc0321150, 0xde642dc0)
<3>[42144.123202] msdc3 -> USR Resume <- msdc_pm() : L<1128> PID
<4>[42144.124667] +mmc_rescan: mmc1--Liu
<3>[42144.125111] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<2899> PID
<3>[42144.163424] msdc3 -> ================ <- msdc_set_mclk() : L<709> PID
<3>[42144.164355] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<711> PID
<3>[42144.165899] msdc3 -> ================ <- msdc_set_mclk() : L<712> PID
<3>[42144.183765] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3084>
<3>[42144.185372] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3084>
<3>[42144.190721] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3084>
<4>[42144.192192] mmc_rescan: mmc1, SDIO card? err=0--Liu
<3>[42144.193703] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1188> PID
<3>[42144.226203] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2844> PID
<3>[42144.227291] msdc3 -> ================ <- msdc_set_mclk() : L<709> PID
<3>[42144.228220] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<711> PID
<3>[42144.229786] msdc3 -> ================ <- msdc_set_mclk() : L<712> PID
<4>[42144.233757] mmc1: new high speed SDIO card at address 0001--Liu
<3>[42144.236336] [WCN_CMN/HIF] hif_sdio_probe: WCN_CMN/HIFvendor(0x37a) device(0x20a) num(0x1)
<3>[42144.237346] [WCN_CMN/HIF] hif_sdio_probe: card->info[0]: MediaTek MT6620 Wireless Combo Chip
<3>[42144.238396] [WCN_CMN/HIF] hif_sdio_probe: card->info[1]:
<3>[42144.239067] [WCN_CMN/HIF] hif_sdio_probe: card->info[2]:
<3>[42144.243300] [WCN_CMN/HIF] hif_sdio_probe: blksize: cur(512) max(2048)
<3>[42144.244103] [WCN_CMN/HIF] hif_sdio_probe: host max: blk_size(2048) blk_count(520192)
<4>[42144.245091] -mmc_rescan: mmc1--Liu
<3>[42144.283188] [WCN_CMN/HIF] hif_sdio_wifi_on: ()
<7>[42144.283844] [2:kthreadd] fork [13199:kthreadd]
<3>[42144.293214] [WCN_CMN/HIF] hif_sdio_wifi_on: sdio_claim_irq ret=0
<5>[42144.293967] [wlan] net_device prDev(0xc7d3d000) allocated
<3>[42144.296186] [WCN_CMN/WMT] mtk_wcn_wmt_hwver_get:*pWmtDevCtx->combo_ver.hw_ver = 8a11
<3>[42144.297142] [WCN_CMN/WMT] mtk_wcn_wmt_hwver_get:*Get Combo Hw Version, OK , ver = 3
<5>[42144.298127] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[42144.314134] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[42144.315289] [wlan] Virtual Address = e9ff7000 for COMMON MGMT MEMORY POOL.
<5>[42144.316133] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[42144.317020] [wlan] Virtual Address = e9ffa000 for SW_RFB_T.
<5>[42144.317700] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[42144.318573] [wlan] Virtual Address = eaa48000 for MSDU_INFO_T.
<6>[42144.319468] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[42144.343268] [wlan] Chip ID: 0x6620
<6>[42144.343283] [wlan] Revision ID: 0x1
<6>[42144.373228] yaffs: userdata sync do_checkpoint 0,gc_urgen 1
<6>[42144.373241] yaffs: userdata yaffs_FlushSuperBlock 0
<7>[42144.375860] [13169:Thread-168] exit
<7>[42144.537842] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[42144.649113] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<6>[42144.995848] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[42145.096782] [332:.system_server] fork [13200:.system_server]
<7>[42145.103223] [13200:.system_server] set proc[13200] name: -> [waitForActivity]
<7>[42145.104821] [332:.system_server] fork [13201:.system_server]
<7>[42145.113275] [13201:.system_server] set proc[13201] name: -> [Thread-114]
<7>[42145.127058] [13201:Thread-114] exit
<6>[42145.233233] [wlan] Ready bit asserted
<5>[42145.270235] [wlan] [wifi] wlan%d netif_carrier_off
<6>[42145.270823] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[42145.270892] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[42145.270965] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[42145.271963] [2:kthreadd] fork [13202:kthreadd]
<5>[42145.273227] [wlan] tx_thread starts running...
<3>[42145.275005] [WCN_CMN/WMT] wmt_core: Fun(3) [FUNC_ON]
<4>[42145.275310]
<3>[42145.275802] [WCN_CMN/WMT] wmt_core: [POWER_ON] [POWER_STATUS](b:2 f:2 g:2 w:4 lp:2 wmt:4 sd1:4 sd2:2 stp:2)
<4>[42145.276114]
<3>[42145.277741] [WCN_CMN/STP] _stp_psm_enable: _stp_psm_enable
<3>[42145.278431] [WCN_CMN/STP] _stp_psm_enable: psm_en+wake_lock(0)
<3>[42145.279151] [WCN_CMN/STP] _stp_psm_enable: psm_en+wake_lock(1)#
<3>[42145.279887] [WCN_CMN/WMT] mtk_wcn_wmt_hwver_get:*pWmtDevCtx->combo_ver.hw_ver = 8a11
<3>[42145.280845] [WCN_CMN/WMT] mtk_wcn_wmt_hwver_get:*Get Combo Hw Version, OK , ver = 3
<3>[42145.281802] [WCN_CMN/WMT] mtk_wcn_wmt_func_on:after wake_unlock(0), enter_counter(0)
<3>[42145.282762] [WCN_CMN/WMT] mtk_wcn_wmt_func_on:enter_counter(0)
<3>[42145.283908] [WCN_CMN/STP] _stp_psm_proc: lxop_get_opid = 1, STP_OPID_WAKEUP, remaining count = *0*
<6>[42145.296985] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[42145.297008] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[42145.313723] [1:init] fork [13203:init]
<7>[42145.316395] [239:WifiService] fork [13204:WifiService]
<7>[42145.321145] [13204:WifiService] set proc[13204] name: -> [WifiMonitor]
<7>[42145.323602] [13203:init] set proc[13203] name: -> [logwrapper]
<7>[42145.325562] [13203:logwrapper] fork [13205:logwrapper]
<7>[42145.337960] [212:er.ServerThread] fork [13206:er.ServerThread]
<7>[42145.338551] [13205:logwrapper] set proc[13205] name: -> [wpa_supplicant]
<7>[42145.345717] [6782:logcat] sig 13 to [6782:logcat]
<7>[42145.352336] [6782:logcat] sig 13 to [6782:logcat]
<7>[42145.357715] [239:WifiService] fork [13207:WifiService]
<7>[42145.373355] [13206:er.ServerThread] set proc[13206] name: -> [Thread-341]
<7>[42145.374624] [13206:Thread-341] exit
<7>[42145.375161] [13207:WifiService] set proc[13207] name: -> [WifiWatchdogThr]
<5>[42145.614365] [wlan] N=0 closed
<5>[42145.614733] [wlan] EVENT-ROAMING ABORT: Current Time = 41058250
<5>[42145.615463] [wlan] [13] TRANSITION: [0] -> [0]
<7>[42145.616214] [5:khelper] fork [13208:khelper]
<7>[42145.617075] [13208:khelper] fork [13209:khelper]
<7>[42145.617130] [13209:khelper] exit
<7>[42145.617154] [13209:khelper] sig 17 to [13208:khelper]
<7>[42145.617193] [13208:khelper] exit
<6>[42145.618134] [wlan] NAF=0,0,0
<6>[42145.618149] [wlan] NAF=0,0,0
<7>[42145.687866] [13210:AsyncTask #1] set proc[13210] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=ALPS.GB2.MP.V2.P6
ro.build.version.incremental=eng.user.1342401952
ro.custom.build.version=SW05_FLY_UK_IQ255_2012_07_16
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=2012年 07月 16日 星期一 09:33:45 CST
ro.build.date.utc=1342402425
ro.build.type=eng
ro.build.user=user
ro.build.host=user-OptiPlex-990
ro.build.tags=test-keys
ro.product.model=IQ255
ro.product.brand=alps
ro.product.name=tinnoes75_s8052
ro.product.device=tinnoes75_s8052
ro.product.board=tinnoes75_s8052
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=uk
ro.product.locale.region=UA
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=tinnoes75_s8052
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=tinnoes75_s8052-eng 2.3.6 GRK39F eng.user.1342401952 test-keys
ro.build.fingerprint=alps/tinnoes75_s8052/tinnoes75_s8052:2.3.6/GRK39F/1342401952:eng/test-keys
ro.build.flavor=
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.GB2.MP.V2.P6
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=0
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
launcher2.allappsgrid=2d
curlockscreen=2
wifi.direct.interface=p2p0
# Liu.Yang, Force to open ADB
#persist.service.adb.enable=1
#Eajum modify for off USB Debugging as default
persist.service.adb.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
curlockscreen=1
ro.mediatek.gemini_support=true
ro.mediatek.drm_support=false
persist.sys.timezone=Europe/Moscow
ro.operator.optr=CUST
ro.config.ringtone=Sunshine.ogg
ro.config.notification_sound=Afflatus.ogg
ro.config.alarm_alert=RoosterAlarm.ogg
ro.kernel.android.checkjni=0
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163794 54 mtkbc,mtklfb, Live 0xbf006000
mtklfb 14701 0 - Live 0xbf03c000
mtkbc 6303 0 - Live 0xbf046000
mtk_drvb 4403 0 - Live 0xbf04d000 (P)
mtk_stp_core 213647 5 mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_wmt,mtk_stp_uart, Live 0xbf054000 (P)
mtk_stp_uart 20794 1 - Live 0xbf094000 (P)
mtk_hif_sdio 11381 2 wlan,mtk_stp_wmt, Live 0xbf09f000
mtk_stp_wmt 93995 6 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps, Live 0xbf0a8000 (P)
mtk_stp_gps 37498 0 - Live 0xbf0cc000
mtk_stp_bt 39770 0 - Live 0xbf0db000
mt6620_fm_drv 106860 1 mtk_fm_priv, Live 0xbf0eb000
mtk_fm_priv 8577 0 - Live 0xbf114000 (P)
wlan 279314 2 - Live 0xbf11c000 (P)
ccci_plat 101232 3 sec,ccmni,ccci, Live 0xbf179000 (P)
ccci 136488 15 ccmni, Live 0xbf19b000 (P)
ccmni 16238 0 - Live 0xbf1ca000 (P)
mt6575_m4u 84515 4 - Live 0xbf1d4000 (P)
mt6575_vcodec_kernel_driver 23581 0 - Live 0xbf1f1000 (P)
sec 84741 0 - Live 0xbf1fe000 (P)
aed 18230 3 - Live 0xbf21a000 (P)
RAM: 512 MB (500 MB available)
System RAM: 246.000MB
System RAM: 254.000MB
mtkfb.0: 2.000MB
Flash: 16 GB (14.837 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 14.837 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Тачскрин для alps IQ255
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
Новый аккумулятор для alps IQ255
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
Чехлы для alps IQ255
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |