1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | samsung |
Model | GT-I8190 |
Firmware | 2.3.6; eng.sw04.1381216170; SDK10 |
CPU | 2 cores; SAMSUNG GOLDEN(montblanc) |
Display | 800 x 480; DPI: 240; Evaluated Size: 3.9" |
Touch screen | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
RAM | 256 MB (242 MB available) |
Flash | 8 GB (7.617 GB actual); 0.5 GB (0.472 GB actual) (see memory map tab) |
Communications | |
Phone | GSM; Net: EDGE |
WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 4.9 MP; Max: 2560x1920; Focus: infinity; Flash modes: on off torch |
Back camera | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Sensors | mmc328x 3-axis Magnetic Field sensor (MEMSIC); range: 0...600; resolution: 0.002 (0%); power: 0.25mA; |
mc3210 3-axis Accelerometer (Freescale); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
ADCALSPS Proximity Sensor (adps9900); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
ADCALSPS Light Sensor (adps9900); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0.38mA; | |
Vibrator | Yes |
Supported languages | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3753 |
FM radio | Supported by chipset |
Owner's comment: | samsung galaxy s3 mini |
SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (sw04@server3) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Tue Oct 8 15:09:18 CST 2013
CODENAME: REL
Mainboard: unknown
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: E952
DISPLAY: JRO03H.I8190XXALJL
FINGERPRINT: alps/E952/E952:2.3.6/GRK39F/eng.release-builder.1381216593:eng/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : SAMSUNG GOLDEN(montblanc)
HardwareP1 : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 463.653143] [1683:dmesg] exit
<7>[ 463.653321] [1683:dmesg] sig 17 to [1680:AsyncTask #1]
<6>[ 463.684909] [WLAN] rfkill_set_block(blocked 0)
<6>[ 463.684920] [WLAN] Power on
<3>[ 463.684939] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 463.684961] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 463.685003] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 463.685015] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 463.685024] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 463.685033] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(GPIO122)
<3>[ 463.685042] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 463.685051] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO15)
<3>[ 463.685060] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(18)
<3>[ 463.685069] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO17)
<3>[ 463.685078] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(17)
<3>[ 463.685087] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 463.685096] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 463.685104] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 463.685113] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 463.685122] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 463.685130] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 463.685140] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 463.685150] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(not defined)
<3>[ 463.685159] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[ 463.685169] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 463.685180] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 463.685193] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 463.685203] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 463.685218] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 463.685228] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[ 463.685238] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<5>[ 463.794459] [Power/RTC] RTC_GPIO user 9 enables 32k (0x1200)
<3>[ 463.904388] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, rtc clock exported
<3>[ 464.004426] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 464.004444] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 464.004458] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 464.004649] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 464.004660] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 464.004670] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 464.005128] mt6575_get_bus_freq() return 192400
<3>[ 464.005367] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 464.005378] Flush type = 4 Rx Queue
<3>[ 464.005505] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 464.005519] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 464.005531] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 464.005539] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 464.005549] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 464.005561] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 464.005572] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 464.005582] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 464.005593] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 464.010955] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 464.016305] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8b10)
<3>[ 464.021746] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8b10)
<3>[ 464.021764] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8b10) by full match! index:2
<3>[ 464.021778] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E3 (0x8b10, WMTHWVER:2, patch_ext:_e2)
<3>[ 464.021794] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 464.032381] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 464.032395] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 464.038275] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 464.038292] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 464.039494] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 464.039507] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120720151042a
<3>[ 464.039518] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 464.039528] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 464.039537] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 464.039546] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[ 464.039556] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 464.173659] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(20, 844) ok
<3>[ 464.174416] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf0868dc)
<3>[ 464.175391] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 464.176147] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 464.176160] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 464.176172] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 464.176183] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[ 464.197345] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 464.197357] [WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 464.197368] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 464.197381] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 464.197392] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 464.197399] board_sdio_ctrl force off before on
<6>[ 464.197406] mtk_wcn_cmb_sdio_off (3)
<5>[ 464.197421] [Power/clkmgr] [enable_clock] enable wpll clksrc 0x2 for clock 18
<5>[ 464.197464] [Power/clkmgr] [enable_wpll_clksrc_op] wpll_clksrc_mask=0x2, wpll_clksrc_state=0x3, WPLL_CON=0x3b
<5>[ 464.197504] [Power/clkmgr] [disable_clock] disable wpll clksrc 0x2 for clock 18
<5>[ 464.197517] [Power/clkmgr] [disable_wpll_clksrc_op] wpll_clksrc_mask=0x2, wpll_clksrc_state=0x0, WPLL_CON=0x38
<6>[ 464.197534] mtk_wcn_cmb_sdio_on (3)
<5>[ 464.197542] [Power/clkmgr] [enable_clock] enable wpll clksrc 0x2 for clock 18
<5>[ 464.197584] [Power/clkmgr] [enable_wpll_clksrc_op] wpll_clksrc_mask=0x2, wpll_clksrc_state=0x3, WPLL_CON=0x3b
<3>[ 464.197623] msdc3 -> USR Resume <- msdc_pm() : L<1231> PID
<3>[ 464.198725] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3028> PID
<4>[ 464.224402] 2014-01-19 18:33:58.37285 UTC; android time 2014-01-19 18:33:58.37285
<3>[ 464.234632] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[ 464.234649] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<694> PID
<3>[ 464.234664] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<3>[ 464.254952] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3213>
<3>[ 464.255549] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3213>
<3>[ 464.259912] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3213>
<3>[ 464.261259] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1291> PID
<3>[ 464.281531] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2973> PID
<3>[ 464.281568] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[ 464.281584] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<694> PID
<3>[ 464.281598] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<6>[ 464.282423] mmc1: new high speed SDIO card at address 0001
<6>[ 464.283594] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 464.283607] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 464.283617] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 464.283626] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 464.283634] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 464.283641] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 464.283722] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<6>[ 464.354374] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 464.354484] [2:kthreadd] fork [1684:kthreadd]
<6>[ 464.354514] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 464.354540] [wlan] net_device prDev(0xc9df8000) allocated
<5>[ 464.355995] [wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 464.366484] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 464.366536] [wlan] Virtual Address = cfdc9000 for COMMON MGMT MEMORY POOL.
<5>[ 464.366549] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 464.366570] [wlan] Virtual Address = cfdcc000 for SW_RFB_T.
<5>[ 464.366581] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 464.366603] [wlan] Virtual Address = cfdd1000 for MSDU_INFO_T.
<6>[ 464.366615] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 464.384413] [wlan] Chip ID: 0x6628
<6>[ 464.384425] [wlan] Revision ID: 0x0
<6>[ 465.183860] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 465.194415] [wlan] Ready bit asserted
<5>[ 465.238050] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 465.238065] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 465.238131] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 465.238203] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 465.238498] [2:kthreadd] fork [1685:kthreadd]
<5>[ 465.238537] [wlan] tx_thread starts running...
<6>[ 465.244474] yaffs: userdata sync do_checkpoint 0,gc_urgen 1
<6>[ 465.244484] yaffs: userdata yaffs_FlushSuperBlock 0
<6>[ 465.325746] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 465.325761] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 465.325780] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 465.326458] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 465.326492] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 465.327042] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[ 465.331234] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 465.331258] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 465.331786] [1:init] fork [1686:init]
<7>[ 465.335388] [254:WifiService] fork [1687:WifiService]
<7>[ 465.336859] [1687:WifiService] set proc[1687] name: -> [WifiMonitor]
<7>[ 465.338490] [1686:init] set proc[1686] name: -> [logwrapper]
<7>[ 465.341806] [1686:logwrapper] fork [1688:logwrapper]
<7>[ 465.353182] [1688:logwrapper] set proc[1688] name: -> [wpa_supplicant]
<7>[ 465.372512] [222:er.ServerThread] fork [1689:er.ServerThread]
<7>[ 465.392305] [254:WifiService] fork [1690:WifiService]
<7>[ 465.397438] [1689:er.ServerThread] set proc[1689] name: -> [Thread-143]
<7>[ 465.397994] [1690:WifiService] set proc[1690] name: -> [WifiWatchdogThr]
<7>[ 465.407477] [1689:Thread-143] exit
<5>[ 465.434962] [wlan] N=0 closed
<5>[ 465.434980] [wlan] EVENT-ROAMING ABORT: Current Time = 162200
<5>[ 465.434992] [wlan] [13] TRANSITION: [0] -> [0]
<7>[ 465.435166] [5:khelper] fork [1691:khelper]
<7>[ 465.435401] [1691:khelper] fork [1692:khelper]
<7>[ 465.435447] [1692:khelper] exit
<7>[ 465.435469] [1692:khelper] sig 17 to [1691:khelper]
<7>[ 465.435502] [1691:khelper] exit
<6>[ 465.436167] [wlan] NAF=0,0,0
<6>[ 465.436371] [wlan] NAF=0,0,0
<5>[ 465.537961] [wlan] [13] TRANSITION: [0] -> [2]
<6>[ 465.620312] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x2
<6>[ 465.620388] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x6
<6>[ 465.620514] [Power/Battery] [FGADC] fgauge_read_current : FG_CURRENT = fffe
<6>[ 465.620683] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0xc
<6>[ 465.620753] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x8
<6>[ 465.620864] [Power/Battery] [FGADC] fgauge_read_current : current(discharging) = 1 mA
<6>[ 465.620877] [Power/Battery] ori current=1
<5>[ 465.620887] [Power/Battery] [use_chip_trim_value] 1 -> 0
<6>[ 465.620897] [Power/Battery] final current=0 (ratio=106)
<7>[ 465.627663] [Power/Battery] [fgauge_compensate_battery_voltage_recursion] 3773,3773,423,0
<7>[ 465.627679] [Power/Battery] [fgauge_compensate_battery_voltage_recursion] 3773,3773,423,0
<7>[ 465.627693] [Power/Battery] [fgauge_compensate_battery_voltage_recursion] 3773,3773,423,0
<7>[ 465.627707] [Power/Battery] [fgauge_compensate_battery_voltage_recursion] 3773,3773,423,0
<7>[ 465.627720] [Power/Battery] [fgauge_compensate_battery_voltage_recursion] 3773,3773,423,0
<6>[ 465.627733] [Power/Battery] [fgauge_compensate_battery_voltage_recursion] 3773,3773,423,0
<6>[ 465.628019] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x2
<6>[ 465.628092] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x6
<6>[ 465.628225] [Power/Battery] [FGADC] fgauge_read_current : FG_CURRENT = fffe
<6>[ 465.628403] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0xc
<6>[ 465.628476] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x8
<6>[ 465.628596] [Power/Battery] [FGADC] fgauge_read_current : current(discharging) = 1 mA
<6>[ 465.628609] [Power/Battery] ori current=1
<5>[ 465.628618] [Power/Battery] [use_chip_trim_value] 1 -> 0
<6>[ 465.628628] [Power/Battery] final current=0 (ratio=106)
<6>[ 465.628910] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x2
<6>[ 465.628983] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x6
<6>[ 465.629233] [Power/Battery] [FGADC] fgauge_read_columb : FG_CAR = 0xffff
<6>[ 465.629246] [Power/Battery] [FGADC] fgauge_read_columb : uvalue32_CAR_MSB = 0x1
<6>[ 465.629424] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0xc
<6>[ 465.629497] [Power/Battery] [fg_get_data_ready_status] Reg[0x6a]=0x8
<6>[ 465.629617] [Power/Battery] [FGADC] fgauge_read_columb : dvalue_CAR = 0
<5>[ 465.629629] [Power/Battery] [use_chip_trim_value] 0 -> 0
<6>[ 465.629640] [Power/Battery] [FGADC] fgauge_read_columb : final dvalue_CAR = 0
<6>[ 465.629712] [Power/Battery] [dump_nter] nter_29_24 = 0x0
<6>[ 465.629783] [Power/Battery] [dump_nter] nter_23_16 = 0x0
<6>[ 465.629855] [Power/Battery] [dump_nter] nter_15_08 = 0x3
<6>[ 465.629926] [Power/Battery] [dump_nter] nter_07_00 = 0xab
<6>[ 465.629998] [Power/Battery] [dump_car] upmu_fgadc_car_35_32 = 0xf
<6>[ 465.630071] [Power/Battery] [dump_car] upmu_fgadc_car_31_24 = 0xff
<6>[ 465.630143] [Power/Battery] [dump_car] upmu_fgadc_car_23_16 = 0xff
<6>[ 465.630215] [Power/Battery] [dump_car] upmu_fgadc_car_15_08 = 0xfb
<6>[ 465.630287] [Power/Battery] [dump_car] upmu_fgadc_car_07_00 = 0xd5
<6>[ 465.630299] [Power/Battery] [FG_BUFFER]
<6>[ 465.630308] [Power/Battery] 3782,
<6>[ 465.630316] [Power/Battery] 3773,
<6>[ 465.630323] [Power/Battery] 3740,
<6>[ 465.630330] [Power/Battery] 3782,
<6>[ 465.630338] [Power/Battery] 3782,
<6>[ 465.630345] [Power/Battery] 3750,
<6>[ 465.630352] [Power/Battery] 3750,
<6>[ 465.630359] [Power/Battery] 3778,
<6>[ 465.630367] [Power/Battery] 3750,
<6>[ 465.630374] [Power/Battery] 3773,
<6>[ 465.630381] [Power/Battery] 3787,
<6>[ 465.630389] [Power/Battery] 3773,
<6>[ 465.630396] [Power/Battery] 3801,
<6>[ 465.630403] [Power/Battery] 3778,
<6>[ 465.630411] [Power/Battery] 3801,
<6>[ 465.630418] [Power/Battery] 3778,
<6>[ 465.630425] [Power/Battery] 3745,
<6>[ 465.630432] [Power/Battery] 3764,
<6>[ 465.630439] [Power/Battery] 3792,
<6>[ 465.630446] [Power/Battery] 3782,
<6>[ 465.630454] [Power/Battery] 3806,
<6>[ 465.630461] [Power/Battery] 3792,
<6>[ 465.630468] [Power/Battery] 3801,
<6>[ 465.630476] [Power/Battery] 3806,
<6>[ 465.630483] [Power/Battery] 3801,
<6>[ 465.630490] [Power/Battery] 3801,
<6>[ 465.630497] [Power/Battery] 3806,
<6>[ 465.630504] [Power/Battery] 3801,
<6>[ 465.630512] [Power/Battery] 3810,
<6>[ 465.630519] [Power/Battery] 3782,
<6>[ 465.630526] [Power/Battery] 3773,
<6>[ 465.630533] [Power/Battery] 3787,
<6>[ 465.630541] [Power/Battery] 3787,
<6>[ 465.630548] [Power/Battery] 3768,
<6>[ 465.630555] [Power/Battery] 3778,
<6>[ 465.630562] [Power/Battery] 3792,
<6>[ 465.630570] [Power/Battery]
<6>[ 465.630579] [Power/Battery] [fgauge_update_dod] FG_dod_1=54, adjust_coulomb_counter=106, gFG_columb=0, gFG_DOD0=54, gFG_temp=0, gFG_BATT_CAPACITY=1062
<6>[ 465.630599] [Power/Battery] [fgauge_get_Q_max] Q_max = 1062
<6>[ 465.630609] [Power/Battery] [fgauge_get_Q_max_high_current] Q_max = 959
<6>[ 465.630620] [Power/Battery] [fgauge_read_capacity] 0,1062,959,59,41,D1=54,D0=54
<5>[ 465.630633] [Power/Battery] [FGADC] 0,0,0,0,3782,40,41,46,1062,1135,0,0,0,1000,0,3773,1000,54,54,1,106,103
<0>[ 465.630827] mt_usb_disconnect 256: [MUSB] USB is ready for disconnect
<7>[ 465.648814] [252:ConnectivityThr] fork [1693:ConnectivityThr]
<7>[ 465.648903] [1693:ConnectivityThr] set proc[1693] name: -> [DHCP Handler Th]
<7>[ 465.690474] [103:zygote] fork [1694:zygote]
<7>[ 465.706561] [1694:zygote] fork [1695:zygote]
<7>[ 465.706701] [1695:zygote] set proc[1695] name: -> [HeapWorker]
<7>[ 465.707404] [1694:zygote] fork [1696:zygote]
<7>[ 465.714636] [1696:zygote] set proc[1696] name: -> [GC]
<7>[ 465.726920] [1694:zygote] fork [1697:zygote]
<7>[ 465.727226] [1697:zygote] set proc[1697] name: -> [Signal Catcher]
<7>[ 465.733652] [1680:AsyncTask #1] fork [1698:AsyncTask #1]
<7>[ 465.736837] [1694:zygote] fork [1699:zygote]
<5>[ 465.737885] [wlan] [13] TRANSITION: [2] -> [0]
<6>[ 465.740163] [wlan] NAF=0,0,0
<7>[ 465.748369] [1699:zygote] set proc[1699] name: -> [JDWP]
<7>[ 465.749831] [1694:zygote] fork [1700:zygote]
<7>[ 465.750194] [1700:zygote] set proc[1700] name: -> [Compiler]
<7>[ 465.754778] [1694:zygote] fork [1701:zygote]
<7>[ 465.757423] [1694:zygote] set proc[1694] name: -> [re-initialized>]
<7>[ 465.760357] [1701:zygote] set proc[1701] name: -> [BinderThd_AP169]
<7>[ 465.767892] [1701:BinderThd_AP169] fork [1702:BinderThd_AP169]
<7>[ 465.768746] [1702:BinderThd_AP169] set proc[1702] name: -> [BinderThd_AP169]
<7>[ 465.776082] [1694:re-initialized>] set proc[1694] name: -> [.android.google]
<7>[ 465.838314] [927:anmaster.mguard] fork [1703:anmaster.mguard]
<7>[ 465.838531] [1703:anmaster.mguard] set proc[1703] name: -> [Thread-22]
<7>[ 465.842130] [317:android.counter] fork [1704:android.counter]
<7>[ 465.842250] [1704:android.counter] set proc[1704] name: -> [Thread-12]
<7>[ 465.845339] [1704:Thread-12] exit
<7>[ 465.886992] [103:zygote] fork [1705:zygote]
<7>[ 465.890081] [1705:zygote] fork [1706:zygote]
<7>[ 465.890145] [1706:zygote] set proc[1706] name: -> [HeapWorker]
<7>[ 465.890865] [1705:zygote] fork [1707:zygote]
<7>[ 465.900766] [1707:zygote] set proc[1707] name: -> [GC]
<7>[ 465.901065] [1705:zygote] fork [1708:zygote]
<7>[ 465.901113] [1708:zygote] set proc[1708] name: -> [Signal Catcher]
<7>[ 465.901344] [1705:zygote] fork [1709:zygote]
<7>[ 465.901382] [1709:zygote] set proc[1709] name: -> [Compiler]
<7>[ 465.907657] [1705:zygote] fork [1710:zygote]
<7>[ 465.908441] [1710:zygote] set proc[1710] name: -> [BinderThd_AP170]
<7>[ 465.910629] [1710:BinderThd_AP170] fork [1711:BinderThd_AP170]
<7>[ 465.913636] [1705:zygote] set proc[1705] name: -> [re-initialized>]
<7>[ 465.922264] [1705:re-initialized>] set proc[1705] name: -> [d.process.media]
<7>[ 465.922860] [1711:BinderThd_AP170] set proc[1711] name: -> [BinderThd_AP170]
<5>[ 465.931510] [wlan] [13] TRANSITION: [0] -> [2]
<7>[ 465.971419] [1705:d.process.media] fork [1712:d.process.media]
<7>[ 465.974457] [1712:d.process.media] set proc[1712] name: -> [DeleteAlbumArtT]
<7>[ 465.974993] [1705:d.process.media] fork [1713:d.process.media]
<7>[ 465.975534] [1713:d.process.media] set proc[1713] name: -> [thumbs thread]
<7>[ 465.990191] [1705:d.process.media] fork [1714:d.process.media]
<7>[ 465.992223] [1714:d.process.media] set proc[1714] name: -> [thumbs-cache-th]
<7>[ 465.992460] [1712:DeleteAlbumArtT] fork [1715:DeleteAlbumArtT]
<7>[ 465.993535] [1715:DeleteAlbumArtT] exit
<7>[ 466.040954] [1698:AsyncTask #1] set proc[1698] name: -> [dmesg]
<7>[ 466.055702] [1694:.android.google] fork [1716:.android.google]
<7>[ 466.056647] [1712:DeleteAlbumArtT] exit
<7>[ 466.057040] [1716:.android.google] set proc[1716] name: -> [Thread-10]
<7>[ 466.092337] [1716:Thread-10] exit
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=JRO03H.I8190XXALJL
ro.build.version.incremental=eng.sw04.1381216170
ro.custom.build.version=V2G.13.10.08
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=2013年 10月 08日 星期二 15:16:33 CST
ro.build.date.utc=1381216593
ro.build.type=user
ro.build.user=release-builder
ro.build.host=smartphone
ro.build.tags=test-keys
ro.product.model=GT-I8190
ro.product.name=E952
ro.product.device=E952
ro.product.brand=samsung
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=MZ
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=E952
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=E952-eng 2.3.6 GRK39F eng.release-builder.1381216593 test-keys
ro.build.fingerprint=alps/E952/E952:2.3.6/GRK39F/eng.release-builder.1381216593:eng/test-keys
persist.sys.timezone=Asia/Shanghai
ro.adups.fota.oem=hezhi
ro.adups.fota.device=e952_g_s_v60Foreign_common
ro.adups.fota.version=V2G.13.10.08
ro.product.android.ver=4.1.2
ro.product.base.ver=I8190XXAMA2
ro.product.kernel.ver=3.0.31-809600 dpi@DELL171
ro.product.inner.ver=JZO54K.I8190XXAMA2
ro.product.model.setting=GT-I8190
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=JRO03H.I8190XXALJL
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#Dfish{
ro.sf.lcd_density=240
ro.media.enc.camera.platform=Mediatek
#Dfish}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=180
ril.current.share_modem=1
launcher2.allappsgrid=3d_20
mzanimnumb=2
curlockscreen=1
ro.mediatek.gemini_support=false
ro.mediatek.drm_support=true
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
doublefish.vendor.pcb.name=PCB_E952
doublefish.mtk.modem.support=modem_2g
doublefish.cust.modem=moztek15cu_gprs_ad6548
doublefish.gemini=no
doublefish.lcd.width=480
doublefish.lcd.height=800
doublefish.touchpanel=ft6206
doublefish.accelerometer=bma250_250e_auto
kxtf9_auto
doublefish.alsps=pstouch
doublefish.mtk.branch=ALPS.GB2.MP
doublefish.custom.verno=V2G.13.10.08
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163658 38 mtkbc,mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03c000
mtkbc 6303 0 - Live 0xbf046000
mtk_drvb 4403 0 - Live 0xbf04d000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf054000
mtk_stp_wmt 363327 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf05f000 (P)
mtk_stp_uart 21521 0 - Live 0xbf0c8000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0d3000
mtk_stp_bt 39754 0 - Live 0xbf0e2000
mtk_fm_drv 98106 1 mtk_fm_priv, Live 0xbf0f1000
mtk_fm_priv 2427 0 - Live 0xbf112000 (P)
wlan_mt6628 271577 0 - Live 0xbf118000 (P)
ccci_plat 101892 3 sec,ccmni,ccci, Live 0xbf173000 (P)
ccci 138050 15 ccmni, Live 0xbf195000 (P)
ccmni 16350 0 - Live 0xbf1c4000 (P)
mt6575_m4u 84190 2 - Live 0xbf1ce000 (P)
devinfo 756 0 - Live 0xbf1eb000 (P)
mt6575_vcodec_kernel_driver 23905 0 - Live 0xbf1f1000 (P)
sec 84741 0 - Live 0xbf1fe000 (P)
aed 18230 3 - Live 0xbf21a000 (P)
RAM: 256 MB (242 MB available)
System RAM: 242.000MB
mtkfb.0: 4.000MB
Flash: 8 GB (7.617 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 7.617 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Touch Screen for samsung GT-I8190
$12.77 Super AMOLED LCD for SAMSUNG Galaxy S3 Mini SIII LCD Display Touch Screen Digitizer i8190 GT-i8190 i8195 i8200 With Frame+Tools
$10.55 Super AMOLED for samsung s3 mini lcd Display Touch Screen Digitizer assembly GT-i8190 i8195 i8200 screen repair Parts
$15.62 Tested For SAMSUNG Galaxy S3 LCD Display i9300 i8190 Touch Screen Digitizer Replacement For SAMSUNG Galaxy S3 Mini LCD Screen
$16.55 Super AMOLED Digitizer Assembly For Samsung Galaxy S3 mini lcd Display Touch Screen GT-I8190 i8190N i8195 i8200 With frame Tools
Replacement Battery for samsung GT-I8190
$49.13 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$47.7 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$6.97 XDOU Battery For SAMSUNG S10E J5 A70 Nnte 10 A8 A51 Grand DUOS S3 S6 S7 Edge S8 S9 S10 Plus GT-I8190 SM-A515 2017 J530 SM-G973
$47.7 Brand New EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$49.13 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$6.46 High Quality 1500mAh EB-L1M7FLU Battery For Samsung Galaxy S3Mini S3 Mini GT-I8190 I8190N I8190 GT-I8200 Smart phone
$47.7 Brand New EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$6.26 EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$6.92 EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$47.17 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$7 NEW Replacement Battery EB-L1M7FLU For Samsung Galaxy S3 Mini S3Mini GT-I8190 I8190N I8190 i820J Battery
$26.27 size Battery 1500MAH EB-L1M7FLU For Mini S3 GT-I8190 I8190N I8190 GT-I8200 Smartphone Battery
$4.5 Stonering EB425161LU 1700mAh Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 I8190 I739 I759 I669 I8160 S7582 J1mini
$47.17 Brand New EB-L1M7FLU EB-F1M7FLU 1500mAh Battery For Samsung Galaxy S3 Mini GT-I8190 i8160 I8190N GT-i8200 S7562 G313 WO
$6.97 XDOU Battery For SAMSUNG S10E J5 A70 Nnte 10 A8 A51 Grand DUOS S3 S6 S7 Edge S8 S9 S10 Plus GT-I8190 SM-A515 2017 J530 SM-G973
$6.97 Replacement Battery For Samsung Galaxy S3 Mini S3Mini I8190N I8190 GT-I8190 GT-i8200 With NFC EB-L1M7FLU 1500mAh
$47.17 Brand New EB425161LU Battery For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 I8160 S7582 SM-J105H J1 MINI
$5.92 Replacement Battery EB425161LU For Samsung GT-S7562L S7560 S7566 S7568 S7572 S7580 i8190 I739 i759 I669 I8160 S7582 J1mini
$4.51 For Samsung Galaxy S3 i9300 GT-i9300 i9305 S3 MINI i8190 GT-I8190N Back Housing Cover Case Battery Cover Replacement
Cover Cases for samsung GT-I8190
$2.69 For Samsung Galaxy S3 Mini i8190 GT-i8190 Cases Soft TPU Silicon Phone Back Cover S3MINI phone back Case etui bumper funda coque
$4.22 Flip Wallet Leather Case For Samsung Galaxy S3 Mini Case i8190 GT i8200 Phone Cover Hard Back i8200n 8190 i 8200 GT-I8190
$3.79 Case for Samsung Galaxy S3 Mini i8190 GT-i8190 Cover Silicone Soft TPU Protective Phone Cases Coque
$3.3 Case for Samsung Galaxy S3 Mini i8190 GT-i8190 Cover Silicone Soft TPU Protective Phone Cases Coque
$4.51 For Samsung Galaxy S3 i9300 GT-i9300 i9305 S3 MINI i8190 GT-I8190N Back Housing Cover Case Battery Cover Replacement
$3.53 Tempered glass For Samsung Galaxy S2 plus S3 S4 S5 S6 S3 mini S4 mini S5 mini GT I9190 i8190 i9500 I9300 I9100 SM G9200 case
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |