1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
| General Specifications | |
|---|---|
| Manufacturer | GL |
| Model | |
| Firmware | 2.3.5; T6M.GL.MUL.V3.03; SDK10 |
| CPU | 2 cores; Dual-Core ARMv7 Processor rev 1 (v7l) sprdbp; Max: 1000,0 MHz; Min: 400,0 MHz |
| Display | 854 x 480; DPI: 240; Evaluated Size: 4,1" |
| Touch screen | Multitouch 2 points |
| GPU | Mali-300; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0 |
| RAM | 256 MB (233 MB available) |
| Flash | 0.5 GB (0.447 GB actual) (see memory map tab) |
| Communications | |
| Phone | GSM; Net: EDGE |
| WiFi | 8723bs; IEEE 802.11 b/g/n; Realtek RTL8723BS; AP Mode |
| USB Host | No |
| Bluetooth | Bluetooth 4.0 |
| GPS | No |
| Advanced Features | |
| Front camera | Photo: 1.9 MP; Max: 1600x1200; Focus: auto auto-multi macro; Flash modes: off on torch |
| Back camera | Photo: 1.2 MP; Max size: 1280x960; Focus: auto; No flash |
| Sensors | MXC622X 2-axis Accelerometer (MCUBE Inc.); range: 0...78,453; resolution: 0,01 (0,012%); power: 0,3mA; |
| AK8975 3-axis Magnetic field sensor (Asahi Kasei Microdevices); range: 0...1228,8; resolution: 0,06 (0,005%); power: 0,35mA; | |
| TAOS Light sensor (LITEON); range: 0...1; resolution: 100000 (10000000%); power: 0,005mA; | |
| TAOS Proximity sensor (LITEON); range: 0...1; resolution: 1 (100%); power: 0,005mA; | |
| Gravity Sensor (Google Inc.); range: 0...78,453; resolution: 0,01 (0,012%); power: 0,3mA; | |
| Linear Acceleration Sensor (Google Inc.); range: 0...78,453; resolution: 0,01 (0,012%); power: 0,3mA; | |
| Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,65mA; | |
| Vibrator | Yes |
| Supported languages | 57; Amharic; Arabic; Bulgarian; Bengali; Tibetan; Catalan; Cebuano; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Gujarati; Hausa; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Georgian; Kazakh; Khmer; Korean; Lao; Lithuanian; Latvian; Malay; Burmese; Norwegian; Dutch; Punjabi; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Tamil; Telugu; Thai; Tagalog; Turkish; Uighur; Ukrainian; Urdu; Vietnamese; Chinese |
| Battery | Technology: Li-ion; Voltage: 3993 |
| FM radio | 76MHz to 108MHz |
| SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (yangyang@yangyang-u) (gcc version 4.4.3 (GCC) ) #7 Fri Aug 16 12:39:35 CST 2013
CODENAME: REL
Mainboard: t6m_2g_gl
BRAND: GL
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: hsdroid
DISPLAY: MocorDroid2.3.5.T6M.GL.MUL.V3.03
FINGERPRINT: GL/sprdroid_base/hsdroid:2.3.5/MocorDroid2.3.5/T6M.GL.MUL.V3.03:user/test-keys
HARDWARE: sp8810
ID: MocorDroid2.3.5
TAGS: test-keys
Processor : Dual-Core ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 1024.00
processor : 1
BogoMIPS : 1024.00
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc05
CPU revision : 1
Hardware : SP8810
Revision : 0000
Serial : 0000000000000000
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_EXT_shader_texture_lod
<4>[ 731.304000] x = -9, y = 26
<6>[ 731.304000] mxc622x read x=-9, y=26, z=32
<6>[ 731.304000] mxc622x poll interval 50
<4>[ 731.357000] x = -5, y = 30
<6>[ 731.357000] mxc622x read x=-5, y=30, z=32
<6>[ 731.357000] mxc622x poll interval 50
<4>[ 731.415000] x = -6, y = 27
<6>[ 731.415000] mxc622x read x=-6, y=27, z=32
<6>[ 731.415000] mxc622x poll interval 50
<4>[ 731.468000] x = -6, y = 27
<6>[ 731.468000] mxc622x read x=-6, y=27, z=32
<6>[ 731.468000] mxc622x poll interval 50
<4>[ 731.522000] x = -6, y = 27
<6>[ 731.522000] mxc622x read x=-6, y=27, z=32
<6>[ 731.522000] mxc622x poll interval 50
<4>[ 731.571000] x = -7, y = 27
<6>[ 731.571000] mxc622x read x=-7, y=27, z=32
<6>[ 731.571000] mxc622x poll interval 50
<6>[ 731.602000] binder: 276:497 transaction failed 29189, size 212-0
<4>[ 731.623000] x = -6, y = 28
<6>[ 731.623000] mxc622x read x=-6, y=28, z=32
<6>[ 731.623000] mxc622x poll interval 50
<4>[ 731.670000] x = -6, y = 28
<6>[ 731.670000] mxc622x read x=-6, y=28, z=32
<6>[ 731.670000] mxc622x poll interval 50
<4>[ 731.723000] x = -6, y = 27
<6>[ 731.723000] mxc622x read x=-6, y=27, z=32
<6>[ 731.724000] mxc622x poll interval 50
<4>[ 731.772000] x = -7, y = 27
<6>[ 731.772000] mxc622x read x=-7, y=27, z=32
<6>[ 731.772000] mxc622x poll interval 50
<4>[ 731.829000] x = -6, y = 28
<6>[ 731.829000] mxc622x read x=-6, y=28, z=32
<6>[ 731.829000] mxc622x poll interval 50
<4>[ 731.875000] x = -6, y = 28
<6>[ 731.875000] mxc622x read x=-6, y=28, z=32
<6>[ 731.875000] mxc622x poll interval 50
<4>[ 731.925000] x = -7, y = 27
<6>[ 731.925000] mxc622x read x=-7, y=27, z=32
<6>[ 731.925000] mxc622x poll interval 50
<4>[ 731.973000] x = -6, y = 27
<6>[ 731.973000] mxc622x read x=-6, y=27, z=32
<6>[ 731.974000] mxc622x poll interval 50
<4>[ 732.031000] x = -5, y = 28
<6>[ 732.031000] mxc622x read x=-5, y=28, z=32
<6>[ 732.031000] mxc622x poll interval 50
<4>[ 732.087000] x = -7, y = 26
<6>[ 732.088000] mxc622x read x=-7, y=26, z=32
<6>[ 732.088000] mxc622x poll interval 50
<4>[ 732.140000] x = -5, y = 27
<6>[ 732.140000] mxc622x read x=-5, y=27, z=32
<6>[ 732.140000] mxc622x poll interval 50
<4>[ 732.190000] x = -6, y = 27
<6>[ 732.190000] mxc622x read x=-6, y=27, z=32
<6>[ 732.190000] mxc622x poll interval 50
<4>[ 732.243000] x = -7, y = 25
<6>[ 732.243000] mxc622x read x=-7, y=25, z=32
<6>[ 732.243000] mxc622x poll interval 50
<4>[ 732.293000] x = -4, y = 28
<6>[ 732.293000] mxc622x read x=-4, y=28, z=32
<6>[ 732.294000] mxc622x poll interval 50
<6>[ 732.340000] rtc alarm set at 1420580019, now 1420580001, rtc delta -1.547999999
<4>[ 732.340000] x = -5, y = 27
<6>[ 732.340000] mxc622x read x=-5, y=27, z=32
<6>[ 732.340000] mxc622x poll interval 50
<4>[ 732.390000] x = -7, y = 26
<6>[ 732.390000] mxc622x read x=-7, y=26, z=32
<6>[ 732.390000] mxc622x poll interval 50
<4>[ 732.450000] x = -5, y = 27
<6>[ 732.450000] mxc622x read x=-5, y=27, z=32
<6>[ 732.450000] mxc622x poll interval 50
<4>[ 732.500000] x = -6, y = 27
<6>[ 732.500000] mxc622x read x=-6, y=27, z=32
<6>[ 732.500000] mxc622x poll interval 50
<4>[ 732.549000] x = -6, y = 27
<6>[ 732.549000] mxc622x read x=-6, y=27, z=32
<6>[ 732.549000] mxc622x poll interval 50
<4>[ 732.600000] x = -6, y = 27
<6>[ 732.600000] mxc622x read x=-6, y=27, z=32
<6>[ 732.600000] mxc622x poll interval 50
<4>[ 732.649000] x = -5, y = 27
<6>[ 732.649000] mxc622x read x=-5, y=27, z=32
<6>[ 732.649000] mxc622x poll interval 50
<4>[ 732.698000] x = -4, y = 28
<6>[ 732.698000] mxc622x read x=-4, y=28, z=32
<6>[ 732.698000] mxc622x poll interval 50
<4>[ 732.749000] x = -5, y = 27
<6>[ 732.749000] mxc622x read x=-5, y=27, z=32
<6>[ 732.749000] mxc622x poll interval 50
<4>[ 732.800000] x = -5, y = 27
<6>[ 732.800000] mxc622x read x=-5, y=27, z=32
<6>[ 732.800000] mxc622x poll interval 50
<4>[ 732.848000] x = -4, y = 27
<6>[ 732.848000] mxc622x read x=-4, y=27, z=32
<6>[ 732.848000] mxc622x poll interval 50
<4>[ 732.905000] x = -5, y = 27
<6>[ 732.905000] mxc622x read x=-5, y=27, z=32
<6>[ 732.905000] mxc622x poll interval 50
<4>[ 732.949000] x = -5, y = 26
<6>[ 732.949000] mxc622x read x=-5, y=26, z=32
<6>[ 732.949000] mxc622x poll interval 50
<4>[ 732.999000] x = -5, y = 28
<6>[ 732.999000] mxc622x read x=-5, y=28, z=32
<6>[ 732.999000] mxc622x poll interval 50
<4>[ 733.049000] x = -5, y = 27
<6>[ 733.049000] mxc622x read x=-5, y=27, z=32
<6>[ 733.049000] mxc622x poll interval 50
<4>[ 733.112000] x = -4, y = 27
<6>[ 733.112000] mxc622x read x=-4, y=27, z=32
<6>[ 733.112000] mxc622x poll interval 50
<4>[ 733.159000] x = -4, y = 29
<6>[ 733.159000] mxc622x read x=-4, y=29, z=32
<6>[ 733.159000] mxc622x poll interval 50
<4>[ 733.208000] x = -5, y = 28
<6>[ 733.208000] mxc622x read x=-5, y=28, z=32
<6>[ 733.209000] mxc622x poll interval 50
<4>[ 733.269000] x = -5, y = 28
<6>[ 733.270000] mxc622x read x=-5, y=28, z=32
<6>[ 733.270000] mxc622x poll interval 50
<4>[ 733.319000] x = -3, y = 28
<6>[ 733.319000] mxc622x read x=-3, y=28, z=32
<6>[ 733.319000] mxc622x poll interval 50
<4>[ 733.362000] veth0: link on (OS#3 <-> OS#2).
<4>[ 733.369000] x = -5, y = 27
<6>[ 733.369000] mxc622x read x=-5, y=27, z=32
<6>[ 733.369000] mxc622x poll interval 50
<4>[ 733.419000] x = -4, y = 28
<6>[ 733.419000] mxc622x read x=-4, y=28, z=32
<6>[ 733.419000] mxc622x poll interval 50
<4>[ 733.469000] x = -4, y = 27
<6>[ 733.469000] mxc622x read x=-4, y=27, z=32
<6>[ 733.469000] mxc622x poll interval 50
<4>[ 733.518000] x = -5, y = 28
<6>[ 733.518000] mxc622x read x=-5, y=28, z=32
<6>[ 733.518000] mxc622x poll interval 50
<4>[ 733.569000] x = -4, y = 27
<6>[ 733.569000] mxc622x read x=-4, y=27, z=32
<6>[ 733.569000] mxc622x poll interval 50
<4>[ 733.619000] x = -5, y = 28
<6>[ 733.619000] mxc622x read x=-5, y=28, z=32
<6>[ 733.619000] mxc622x poll interval 50
<4>[ 733.669000] x = -7, y = 28
<6>[ 733.669000] mxc622x read x=-7, y=28, z=32
<6>[ 733.669000] mxc622x poll interval 50
<4>[ 733.719000] x = -4, y = 27
<6>[ 733.719000] mxc622x read x=-4, y=27, z=32
<6>[ 733.719000] mxc622x poll interval 50
<6>[ 733.772000] rtc alarm set at 1420580019, now 1420580002, rtc delta -1.979000000
<4>[ 733.772000] x = -6, y = 27
<6>[ 733.772000] mxc622x read x=-6, y=27, z=32
<6>[ 733.772000] mxc622x poll interval 50
<4>[ 733.819000] x = -2, y = 29
<6>[ 733.819000] mxc622x read x=-2, y=29, z=32
<6>[ 733.819000] mxc622x poll interval 50
<4>[ 733.868000] x = -7, y = 26
<6>[ 733.868000] mxc622x read x=-7, y=26, z=32
<6>[ 733.868000] mxc622x poll interval 50
<4>[ 733.925000] x = -5, y = 28
<6>[ 733.925000] mxc622x read x=-5, y=28, z=32
<6>[ 733.925000] mxc622x poll interval 50
<6>[ 733.948000] rtc alarm set at 1420580018, now 1420580002, rtc delta 0.159000000
<4>[ 733.979000] x = -4, y = 27
<6>[ 733.979000] mxc622x read x=-4, y=27, z=32
<6>[ 733.979000] mxc622x poll interval 50
<4>[ 734.045000] x = -5, y = 27
<6>[ 734.045000] mxc622x read x=-5, y=27, z=32
<6>[ 734.045000] mxc622x poll interval 50
<4>[ 734.088000] x = -4, y = 28
<6>[ 734.088000] mxc622x read x=-4, y=28, z=32
<6>[ 734.088000] mxc622x poll interval 50
<6>[ 734.129000] rtc alarm set at 1420580568, now 1420580002, rtc delta 0.335000000
<4>[ 734.139000] x = -5, y = 26
<6>[ 734.139000] mxc622x read x=-5, y=26, z=32
<6>[ 734.139000] mxc622x poll interval 50
<4>[ 734.189000] x = -4, y = 27
<6>[ 734.189000] mxc622x read x=-4, y=27, z=32
<6>[ 734.189000] mxc622x poll interval 50
<4>[ 734.239000] x = -2, y = 28
<6>[ 734.239000] mxc622x read x=-2, y=28, z=32
<6>[ 734.239000] mxc622x poll interval 50
<4>[ 734.289000] x = -6, y = 27
<6>[ 734.289000] mxc622x read x=-6, y=27, z=32
<6>[ 734.289000] mxc622x poll interval 50
<4>[ 734.339000] x = -3, y = 28
<6>[ 734.339000] mxc622x read x=-3, y=28, z=32
<6>[ 734.339000] mxc622x poll interval 50
<4>[ 734.389000] x = -2, y = 28
<6>[ 734.389000] mxc622x read x=-2, y=28, z=32
<6>[ 734.389000] mxc622x poll interval 50
<4>[ 734.438000] x = -4, y = 27
<6>[ 734.438000] mxc622x read x=-4, y=27, z=32
<6>[ 734.438000] mxc622x poll interval 50
<4>[ 734.522000] x = -1, y = 28
<6>[ 734.522000] mxc622x read x=-1, y=28, z=32
<6>[ 734.523000] mxc622x poll interval 50
<4>[ 734.569000] x = -3, y = 27
<6>[ 734.569000] mxc622x read x=-3, y=27, z=32
<6>[ 734.569000] mxc622x poll interval 50
<4>[ 734.619000] x = -3, y = 27
<6>[ 734.619000] mxc622x read x=-3, y=27, z=32
<6>[ 734.619000] mxc622x poll interval 50
<4>[ 734.669000] x = -2, y = 27
<6>[ 734.669000] mxc622x read x=-2, y=27, z=32
<6>[ 734.669000] mxc622x poll interval 50
<4>[ 734.719000] x = -1, y = 27
<6>[ 734.719000] mxc622x read x=-1, y=27, z=32
<6>[ 734.719000] mxc622x poll interval 50
<4>[ 734.769000] x = -3, y = 26
<6>[ 734.769000] mxc622x read x=-3, y=26, z=32
<6>[ 734.769000] mxc622x poll interval 50
<4>[ 734.819000] x = -2, y = 27
<6>[ 734.819000] mxc622x read x=-2, y=27, z=32
<6>[ 734.819000] mxc622x poll interval 50
<4>[ 734.868000] x = -2, y = 26
<6>[ 734.868000] mxc622x read x=-2, y=26, z=32
<6>[ 734.868000] mxc622x poll interval 50
<4>[ 734.948000] x = -2, y = 26
<6>[ 734.948000] mxc622x read x=-2, y=26, z=32
<6>[ 734.948000] mxc622x poll interval 50
<4>[ 735.008000] x = -1, y = 27
<6>[ 735.008000] mxc622x read x=-1, y=27, z=32
<6>[ 735.008000] mxc622x poll interval 50
<4>[ 735.058000] x = -2, y = 26
<6>[ 735.058000] mxc622x read x=-2, y=26, z=32
<6>[ 735.058000] mxc622x poll interval 50
<4>[ 735.105000] select 1733 (.quicksearchbox), adj 8, size 3887, to kill
<4>[ 735.105000] send sigkill to 1733 (.quicksearchbox), adj 8, size 3887
<4>[ 735.110000] x = -2, y = 27
<6>[ 735.110000] mxc622x read x=-2, y=27, z=32
<6>[ 735.110000] mxc622x poll interval 50
<4>[ 735.173000] x = -2, y = 27
<6>[ 735.173000] mxc622x read x=-2, y=27, z=32
<6>[ 735.173000] mxc622x poll interval 50
<4>[ 735.320000] RTL871X: module init start version:v4.1.3_xxxx.20130625
<4>[ 735.320000] RTL871X: rtl8723bs driver version=v4.1.3_xxxx.20130625
<4>[ 735.320000] RTL871X: build time: Aug 15 2013 17:59:39
<4>[ 735.320000] RTL871X: rtw_wifi_gpio_wlan_ctrl: callc customer specific GPIO(137) to set wifi power down pin to 1
<4>[ 735.320000] RTL871X: ##########rtw_suspend_lock_init ###########
<4>[ 735.330000] x = -2, y = 27
<6>[ 735.330000] mxc622x read x=-2, y=27, z=32
<6>[ 735.330000] mxc622x poll interval 50
<4>[ 735.378000] x = -1, y = 27
<6>[ 735.378000] mxc622x read x=-1, y=27, z=32
<6>[ 735.378000] mxc622x poll interval 50
<4>[ 735.438000] x = -2, y = 27
<6>[ 735.438000] mxc622x read x=-2, y=27, z=32
<6>[ 735.438000] mxc622x poll interval 50
<4>[ 735.439000]
<4>[ 735.439000] ####: thread period: [0 + 0 + [arch_idle = 49]]/[30121]
<4>[ 735.439000]
<4>[ 735.439000] ===========================
<4>[ 735.439000] ##: GR_GEN0 = fffeb37c.
<4>[ 735.439000] GEN0_SIM0_EN =1.
<4>[ 735.439000] GEN0_I2C_EN =1.
<4>[ 735.439000] GEN0_GPIO_EN =1.
<4>[ 735.439000] GEN0_I2C0_EN =1.
<4>[ 735.439000] GEN0_I2C1_EN =1.
<4>[ 735.439000] GEN0_I2C2_EN =1.
<4>[ 735.439000] GEN0_I2C3_EN =1.
<4>[ 735.439000] GEN0_SPI0_EN =1.
<4>[ 735.439000] GEN0_SPI1_EN =1.
<4>[ 735.439000] GEN0_I2S0_EN =1.
<4>[ 735.439000] GEN0_I2S1_EN =1.
<4>[ 735.439000] GEN0_I2S_EN =1.
<4>[ 735.439000] GEN0_PIN_EN =1.
<4>[ 735.439000] GEN0_EPT_EN =1.
<4>[ 735.439000] GEN0_SPI_EN =1.
<4>[ 735.439000] GEN0_UART0_EN =1.
<4>[ 735.439000] GEN0_UART1_EN =1.
<4>[ 735.439000] GEN0_UART2_EN =1.
<4>[ 735.439000] ##: GR_CLK_EN = 03e60000.
<4>[ 735.439000] CLK_PWM0_EN =1.
<4>[ 735.439000] CLK_PWM1_EN = 1.
<4>[ 735.439000] CLK_PWM2_EN = 1.
<4>[ 735.439000] CLK_PWM3_EN = 1.
<4>[ 735.439000] ##: GR_BUSCLK_ALM = 0358d1de.
<4>[ 735.439000] ARM_VB_MCLKON =1.
<4>[ 735.439000] ARM_VB_DA0ON = 1.
<4>[ 735.439000] ARM_VB_DA1ON = 1.
<4>[ 735.439000] ARM_VB_ADCON = 1.
<4>[ 735.439000] ARM_VB_ANAON = 1.
<4>[ 735.439000] ARM_VB_ACC = 1.
<4>[ 735.439000] ##: AHB_CTL0 = 18280048.
<4>[ 735.439000] AHB_CTL0_LCDC_EN =1.
<4>[ 735.439000] AHB_CTL0_SDIO1_EN =1.
<4>[ 735.439000] AHB_CTL0_DMA_EN =1.
<4>[ 735.440000] AHB_CTL0_G3D_EN =1.
<4>[ 735.440000]
<4>[ 735.440000] ===========================
<4>[ 735.440000] ##: ANA_LDO_PD_CTL0 = ea65.
<4>[ 735.440000] ##: LDO_SIM0_CTL is on.
<4>[ 735.440000] ##: LDO_BPCAMD0_CTL is on.
<4>[ 735.440000] ##: LDO_BPCAMD1_CTL is on.
<4>[ 735.440000] ##: LDO_BPCAMA_CTL is on.
<4>[ 735.440000] ##: LDO_BPVB_CTL is on.
<4>[ 735.440000] ##: ANA_LDO_PD_CTL1 = 02aa.
<4>[ 735.440000] ##: LDO_SDIO1_CTL is on.
<4>[ 735.440000] ##: LDO_BPWIF0_CTL is on.
<4>[ 735.440000] ##: LDO_BPWIF1_CTL is on.
<4>[ 735.440000] ##: LDO_SIM2_CTL is on.
<4>[ 735.440000] ##: LDO_SIM3_CTL is on.
<4>[ 735.440000]
<4>[ 735.440000] ===========================
<4>[ 735.440000] ##: ANA_AUDIO_PA_CTRL0 = 0182.
<4>[ 735.440000] ##: ANA_AUDIO_PA_CTRL1 = 1242.
<4>[ 735.440000]
<4>[ 735.440000] ===========================
<4>[ 735.440000] ##: show clock info:
<4>[ 735.440000] ###: clock[ext_32k] is active now, [flags = 00000802] [usecount = 1].
<4>[ 735.440000] ###: clock[ext_26m] is active now, [flags = 00000802] [usecount = 7].
<4>[ 735.440000] ###: clock[mpll_ck] is active now, [flags = 00000800] [usecount = 1].
<4>[ 735.440000] ###: clock[dpll_ck] is active now, [flags = 00000800] [usecount = 1].
<4>[ 735.441000] ###: clock[tdpll_ck] is active now, [flags = 00000002] [usecount = 1].
<4>[ 735.441000] ###: clock[l3_192m] is active now, [flags = 00000002] [usecount = 1].
<4>[ 735.441000] ###: clock[clk_96m] is active now, [flags = 00000002] [usecount = 1].
<4>[ 735.441000] ###: clock[clk_lcdc] is active now, [flags = 00000000] [usecount = 1].
<4>[ 735.441000] ###: clock[clk_uart0] is active now, [flags = 00000000] [usecount = 1].
<4>[ 735.441000] ###: clock[clk_uart1] is active now, [flags = 00000000] [usecount = 1].
<4>[ 735.441000] ###: clock[clk_uart2] is active now, [flags = 00000000] [usecount = 1].
<6>[ 735.441000] active wake lock pm_message_wakelock
<6>[ 735.441000] active wake lock PowerManagerService
<6>[ 735.441000] active wake lock main
<4>[ 735.441000] ##: Some locks are being holded.
<4>[ 735.490000] x = -1, y = 27
<6>[ 735.490000] mxc622x read x=-1, y=27, z=32
<6>[ 735.491000] mxc622x poll interval 50
<4>[ 735.539000] x = -1, y = 27
<6>[ 735.539000] mxc622x read x=-1, y=27, z=32
<6>[ 735.539000] mxc622x poll interval 50
<4>[ 735.569000] RTL871X: register rtw_netdev_ops to netdev_ops
<4>[ 735.570000] RTL871X: Normal_Chip_RTL871X: TSMC_RTL871X: B_CUT_RTL871X: 1T1R_RTL871X: RomVer(0)
<4>[ 735.571000] RTL871X: RF_Type is 3!!
<4>[ 735.571000] RTL871X: EEPROM type is E-FUSE
<4>[ 735.582000] RTL871X: SetHwReg8723B: bMacPwrCtrlOn=1
<4>[ 735.582000] RTL871X: Efuse configure file: /system/etc/wifi/rtk_efuse_8723bs.map
<4>[ 735.583000]
<4>[ 735.583000] 29 81 00 7C 01 00 00 00 40 00 04 05 10 00 00 00
<4>[ 735.583000] 30 30 30 30 30 30 30 30 30 30 30 02 FF FF FF FF
<4>[ 735.583000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.583000] FF FF FF FF FF FF FF FF FF FF 2B 2B 29 29 29 29
<4>[ 735.583000] 2B 2B 2A 2A 2A 02 FF FF FF FF FF FF FF FF FF FF
<4>[ 735.583000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.583000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.583000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.584000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.584000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.584000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.584000] FF FF FF FF FF FF FF FF 20 20 29 00 00 00 FF FF
<4>[ 735.584000] FF 28 20 11 00 00 00 FF 00 FF 10 FF FF FF FF FF
<4>[ 735.584000] 3E 10 01 02 23 00 00 FF 20 04 4C 02 23 B7 21 02
<4>[ 735.584000] 0C 00 22 04 00 08 00 32 FF 21 02 0C 00 22 2A 01
<4>[ 735.584000] 01 00 00 00 00 00 00 00 00 00 00 00 02 00 FF FF
<4>[ 735.584000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<4>[ 735.585000] 00 EB 00 6E 01 00 00 00 00 FF 00 E0 4C B7 23 01
<4>[ 735.585000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.585000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.585000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.585000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.585000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.585000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.585000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.585000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.586000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.586000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.586000] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 735.586000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<4>[ 735.586000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<4>[ 735.586000] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<4>[ 735.586000] RTL871X:
<4>[ 735.586000] RTL871X: wifi mac address:
<4>[ 735.587000] RTL871X: 00
<4>[ 735.587000] RTL871X: 27
<4>[ 735.587000] RTL871X: 15
<4>[ 735.587000] RTL871X: 08
<4>[ 735.587000] RTL871X: bf
<4>[ 735.587000] RTL871X: 92
<4>[ 735.587000] RTL871X:
<4>[ 735.589000] x = -1, y = 26
<6>[ 735.589000] mxc622x read x=-1, y=26, z=32
<6>[ 735.589000] mxc622x poll interval 50
<4>[ 735.605000] logs4android is waiting for /sdcard being mounted
<4>[ 735.615000] RTL871X: Hal_DetectWoWMode
<4>[ 735.615000] RTL871X: <==== _ReadAdapterInfo8723BS in 30 ms
<4>[ 735.616000] RTL871X: rtw_register_early_suspend
<4>[ 735.616000] RTL871X: Init_ODM_ComInfo_8723b(): fab_ver=1 cut_ver=1
<4>[ 735.616000] RTL871X: rtw_macaddr_cfg MAC Address = 00:27:15:08:bf:92
<4>[ 735.617000] RTL871X: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<4>[ 735.632000] RTL871X: [0x00100000,5]-871x_drv - drv_init, success!
<4>[ 735.633000] RTL871X: module init ret=0
<4>[ 735.639000] x = -1, y = 27
<6>[ 735.639000] mxc622x read x=-1, y=27, z=32
<6>[ 735.639000] mxc622x poll interval 50
<4>[ 735.648000] RTL871X: rtw_wifi_open start
<4>[ 735.648000] RTL871X: +871x_drv - drv_open, bup=0
<4>[ 735.648000] RTL871X: +rtw_start_drv_threads
<4>[ 735.668000] RTL871X: start rtl8723bs_xmit_thread
<4>[ 735.680000] RTL871X: ===> Firmware for NIC fw:rtl8723b_FirmwareDownload, size: 30328
<4>[ 735.680000] RTL871X: ===> Firmware for WoWLAN fw:rtl8723b_FirmwareDownload, size: 15880
<4>[ 735.680000] RTL871X: rtl8723b_FirmwareDownload: fw_ver=b fw_subver=1 sig=0x5301
<4>[ 735.680000] RTL871X: rtl8723b_FirmwareDownload(): Shift for fw header!
<4>[ 735.680000] RTL871X: rtl8723b_FirmwareDownload(): FwDownloadenable !
<4>[ 735.689000] x = -2, y = 26
<6>[ 735.689000] mxc622x read x=-2, y=26, z=32
<6>[ 735.689000] mxc622x poll interval 50
<4>[ 735.739000] x = -1, y = 27
<6>[ 735.739000] mxc622x read x=-1, y=27, z=32
<6>[ 735.740000] mxc622x poll interval 50
<4>[ 735.789000] x = -1, y = 27
<6>[ 735.789000] mxc622x read x=-1, y=27, z=32
<6>[ 735.789000] mxc622x poll interval 50
<4>[ 735.841000] x = -2, y = 27
<6>[ 735.841000] mxc622x read x=-2, y=27, z=32
<6>[ 735.841000] mxc622x poll interval 50
<4>[ 735.889000] x = -1, y = 27
<6>[ 735.889000] mxc622x read x=-1, y=27, z=32
<6>[ 735.889000] mxc622x poll interval 50
<4>[ 735.906000] RTL871X: rtl8723b_FirmwareDownload(): Free to go !
<4>[ 735.907000] RTL871X: =====> _8051Reset8723(): 8051 reset success .
<4>[ 735.935000] RTL871X: <=== rtl8723b_FirmwareDownload()
<4>[ 735.936000] RTL871X: HalDetectPwrDownMode(): PDN=0
<4>[ 735.936000] RTL871X: Set RF Chip ID to RF_6052 and RF type to 1T1R.
<4>[ 735.940000] x = -1, y = 27
<6>[ 735.940000] mxc622x read x=-1, y=27, z=32
<6>[ 735.940000] mxc622x poll interval 50
<4>[ 735.988000] x = -1, y = 27
<6>[ 735.988000] mxc622x read x=-1, y=27, z=32
<6>[ 735.988000] mxc622x poll interval 50
<4>[ 736.041000] x = -1, y = 27
<6>[ 736.041000] mxc622x read x=-1, y=27, z=32
<6>[ 736.041000] mxc622x poll interval 50
<4>[ 736.092000] x = -1, y = 27
<6>[ 736.092000] mxc622x read x=-1, y=27, z=32
<6>[ 736.092000] mxc622x poll interval 50
<4>[ 736.146000] x = -3, y = 26
<6>[ 736.146000] mxc622x read x=-3, y=26, z=32
<6>[ 736.146000] mxc622x poll interval 50
<4>[ 736.189000] x = 0, y = 28
<6>[ 736.189000] mxc622x read x=0, y=28, z=32
<6>[ 736.189000] mxc622x poll interval 50
<4>[ 736.248000] x = -1, y = 27
<6>[ 736.248000] mxc622x read x=-1, y=27, z=32
<6>[ 736.248000] mxc622x poll interval 50
<4>[ 736.301000] x = -1, y = 27
<6>[ 736.301000] mxc622x read x=-1, y=27, z=32
<6>[ 736.301000] mxc622x poll interval 50
<4>[ 736.351000] x = -1, y = 27
<6>[ 736.351000] mxc622x read x=-1, y=27, z=32
<6>[ 736.351000] mxc622x poll interval 50
<4>[ 736.398000] x = -1, y = 27
<6>[ 736.399000] mxc622x read x=-1, y=27, z=32
<6>[ 736.399000] mxc622x poll interval 50
<4>[ 736.444000] select 1742 (imizer.duplay:p), adj 4, size 4774, to kill
<4>[ 736.445000] select 1767 (d.process.media), adj 8, size 4155, to kill
<4>[ 736.445000] send sigkill to 1767 (d.process.media), adj 8, size 4155
<4>[ 736.454000] x = -1, y = 27
<6>[ 736.454000] mxc622x read x=-1, y=27, z=32
<6>[ 736.454000] mxc622x poll interval 50
<4>[ 736.498000] x = -1, y = 27
<6>[ 736.498000] mxc622x read x=-1, y=27, z=32
<6>[ 736.498000] mxc622x poll interval 50
<4>[ 736.535000] RTL871X: ===>_RfPowerSave()
<4>[ 736.535000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 736.535000] [BTCoex], 1Ant Init HW Config!!
<4>[ 736.536000] [BTCoex], Coex Mechanism Init!!
<4>[ 736.536000] [BTCoex], PsTdmaCheckForPS!!bNewPsState:0
<4>[ 736.536000] RTL871X: halbtcoutsrc_LeaveLps()-->Leave LPS 32K!pwrctrl->pwr_mode:0
<4>[ 736.536000] [BTCoex], turn OFF PS TDMA, type=0
<4>[ 736.536000] [BTCoex], drv_in_test:0
<4>[ 736.536000] [BTCoex], bPrePsTdmaOn = 0, bCurPsTdmaOn = 0!!
<4>[ 736.536000] [BTCoex], prePsTdma = 0, curPsTdma = 0!!
<4>[ 736.536000] [BTCoex], write Coex Table 0x6c0=0x55555555, 0x6c4=0x55555555, 0x6c8=0xffff, 0x6cc=0x3
<4>[ 736.536000] [BTCoex], preVal0x6c0=0x0, preVal0x6c4=0x0, preVal0x6c8=0x0, preVal0x6cc=0x0 !!
<4>[ 736.536000] [BTCoex], curVal0x6c0=0x55555555, curVal0x6c4=0x55555555, curVal0x6c8=0xffff, curVal0x6cc=0x3 !!
<4>[ 736.536000] [BTCoex], set coex table, set 0x6c0=0x55555555
<4>[ 736.536000] [BTCoex], set coex table, set 0x6c4=0x55555555
<4>[ 736.536000] [BTCoex], set coex table, set 0x6c8=0xffff
<4>[ 736.536000] [BTCoex], set coex table, set 0x6cc=0x3
<4>[ 736.537000] [BTCoex], force to write Coex Table 0x6c0=0x55555555, 0x6c4=0x55555555, 0x6c8=0xffff, 0x6cc=0x3
<4>[ 736.537000] [BTCoex], set coex table, set 0x6c0=0x55555555
<4>[ 736.537000] [BTCoex], set coex table, set 0x6c4=0x55555555
<4>[ 736.537000] [BTCoex], set coex table, set 0x6c8=0xffff
<4>[ 736.537000] [BTCoex], set coex table, set 0x6cc=0x3
<4>[ 736.537000] [BTCoex], Query Bt Info, FW write 0x61=0x1
<4>[ 736.537000] RTL871X: call halbtcoutsrc_FillH2cCmd
<4>[ 736.537000] RTL871X: call FillH2CCmd8723B:elementId:0x61
<4>[ 736.537000] RTL871X: MSG_BOX:0, CmdLen(1), CmdID(0x61), reg:0x1d0 =>h2c_cmd:0x00000161, reg:0x1 =>h2c_cmd_ex:0x00000000
<4>[ 736.538000] RTL871X: pdmpriv->TxPowerTrackControl = 1
<4>[ 736.538000] RTL871X: MAC Address from REG_MACID = 00:27:15:08:bf:92
<4>[ 736.538000] RTL871X: [0x00004000,5]-rtl871x_hal_init:status=0x1
<4>[ 736.538000] RTL871X: MAC Address = 00:27:15:08:bf:92
<4>[ 736.538000] RTL871X: set_channel_bwmode channel:1 channel_offset:0 bwmode:0
<4>[ 736.548000] RTL871X: -871x_drv - drv_open, bup=1
<4>[ 736.548000] RTL871X: rtw_wifi_open ok
<4>[ 736.549000] x = -1, y = 27
<6>[ 736.549000] mxc622x read x=-1, y=27, z=32
<6>[ 736.549000] mxc622x poll interval 50
<4>[ 736.549000] RTL871X: +rtl8723bs_c2h_packet_handler() length=9
<4>[ 736.549000] RTL871X: -rtl8723bs_c2h_packet_handler()
<4>[ 736.549000] RTL871X: C2HPacketHandler_8723B C2hEvent.CmdID:9 C2hEvent.CmdLen:7 C2hEvent.CmdSeq:0
<4>[ 736.549000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 736.549000] [BTCoex], ================BTDM_BtInfoNotify======================
<4>[ 736.549000] [BTCoex], BtInfoNotify()===>
<4>[ 736.549000] [BTCoex], Bt info[0], length=7, hex data=[0x 0, 0x 0, 0x 0, 0x 0, 0x 0, 0x 0, 0x 0]
<4>[ 736.549000] [BTCoex], BtInfoNotify(), bt non-connected idle!!!
<4>[ 736.549000] [BTCoex], RunCoexistMechanism()===>
<4>[ 736.549000] [BTCoex], wifi is non connected-idle !!!
<4>[ 736.549000] [BTCoex], PsTdmaCheckForPS!!bNewPsState:0
<4>[ 736.549000] RTL871X: halbtcoutsrc_LeaveLps()-->Leave LPS 32K!pwrctrl->pwr_mode:0
<4>[ 736.549000] [BTCoex], turn OFF PS TDMA, type=0
<4>[ 736.549000] [BTCoex], drv_in_test:0
<4>[ 736.549000] [BTCoex], bPrePsTdmaOn = 0, bCurPsTdmaOn = 0!!
<4>[ 736.549000] [BTCoex], prePsTdma = 0, curPsTdma = 0!!
<4>[ 736.549000] [BTCoex], write Coex Table 0x6c0=0x55555555, 0x6c4=0x55555555, 0x6c8=0xffff, 0x6cc=0x3
<4>[ 736.550000] [BTCoex], preVal0x6c0=0x55555555, preVal0x6c4=0x55555555, preVal0x6c8=0xffff, preVal0x6cc=0x3 !!
<4>[ 736.550000] [BTCoex], curVal0x6c0=0x55555555, curVal0x6c4=0x55555555, curVal0x6c8=0xffff, curVal0x6cc=0x3 !!
<4>[ 736.550000] [BTCoex], RunCoexistMechanism()<===
<4>[ 736.550000] [BTCoex], BtInfoNotify()<===
<4>[ 736.550000] [BTCoex], ================END BTDM_BtInfoNotify======================
<6>[ 736.550000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 736.599000] x = -1, y = 27
<6>[ 736.599000] mxc622x read x=-1, y=27, z=32
<6>[ 736.599000] mxc622x poll interval 50
<4>[ 736.649000] x = -2, y = 27
<6>[ 736.649000] mxc622x read x=-2, y=27, z=32
<6>[ 736.649000] mxc622x poll interval 50
<4>[ 736.698000] x = -1, y = 27
<6>[ 736.698000] mxc622x read x=-1, y=27, z=32
<6>[ 736.698000] mxc622x poll interval 50
<4>[ 736.757000] x = -2, y = 27
<6>[ 736.757000] mxc622x read x=-2, y=27, z=32
<6>[ 736.757000] mxc622x poll interval 50
<4>[ 736.801000] x = -1, y = 27
<6>[ 736.801000] mxc622x read x=-1, y=27, z=32
<6>[ 736.801000] mxc622x poll interval 50
<4>[ 736.864000] x = -1, y = 27
<6>[ 736.864000] mxc622x read x=-1, y=27, z=32
<6>[ 736.864000] mxc622x poll interval 50
<4>[ 736.909000] x = -1, y = 27
<6>[ 736.909000] mxc622x read x=-1, y=27, z=32
<6>[ 736.909000] mxc622x poll interval 50
<4>[ 736.968000] x = -2, y = 27
<6>[ 736.968000] mxc622x read x=-2, y=27, z=32
<6>[ 736.968000] mxc622x poll interval 50
<4>[ 737.015000] x = -1, y = 27
<6>[ 737.015000] mxc622x read x=-1, y=27, z=32
<6>[ 737.016000] mxc622x poll interval 50
<4>[ 737.059000] x = -1, y = 27
<6>[ 737.059000] mxc622x read x=-1, y=27, z=32
<6>[ 737.059000] mxc622x poll interval 50
<4>[ 737.110000] x = -2, y = 27
<6>[ 737.110000] mxc622x read x=-2, y=27, z=32
<6>[ 737.110000] mxc622x poll interval 50
<4>[ 737.159000] x = -1, y = 27
<6>[ 737.159000] mxc622x read x=-1, y=27, z=32
<6>[ 737.159000] mxc622x poll interval 50
<4>[ 737.209000] x = -1, y = 27
<6>[ 737.209000] mxc622x read x=-1, y=27, z=32
<6>[ 737.209000] mxc622x poll interval 50
<4>[ 737.265000] x = -1, y = 27
<6>[ 737.265000] mxc622x read x=-1, y=27, z=32
<6>[ 737.265000] mxc622x poll interval 50
<4>[ 737.309000] x = -1, y = 28
<6>[ 737.309000] mxc622x read x=-1, y=28, z=32
<6>[ 737.309000] mxc622x poll interval 50
<4>[ 737.357000] RTL871X: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<4>[ 737.357000] RTL871X: set_mode = IW_MODE_INFRA
<4>[ 737.358000] RTL871X: [0x00000010,5]after enqueue set_auth_cmd, auth_mode=0
<4>[ 737.358000] RTL871X: set bssid:00:00:00:00:00:00
<4>[ 737.359000] x = -1, y = 28
<6>[ 737.359000] mxc622x read x=-1, y=28, z=32
<6>[ 737.359000] mxc622x poll interval 50
<4>[ 737.385000] RTL871X: [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<4>[ 737.414000] x = -1, y = 28
<6>[ 737.414000] mxc622x read x=-1, y=28, z=32
<6>[ 737.414000] mxc622x poll interval 50
<4>[ 737.460000] x = -1, y = 28
<6>[ 737.460000] mxc622x read x=-1, y=28, z=32
<6>[ 737.461000] mxc622x poll interval 50
<4>[ 737.499000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 737.499000] [BTCoex], SCAN START notify bWifiConnected:0
<4>[ 737.499000] [BTCoex], PsTdmaCheckForPS!!bNewPsState:0
<4>[ 737.499000] RTL871X: halbtcoutsrc_LeaveLps()-->Leave LPS 32K!pwrctrl->pwr_mode:0
<4>[ 737.499000] [BTCoex], turn ON PS TDMA, type=28
<4>[ 737.499000] [BTCoex], drv_in_test:0
<4>[ 737.499000] [BTCoex], bPrePsTdmaOn = 0, bCurPsTdmaOn = 1!!
<4>[ 737.499000] [BTCoex], prePsTdma = 0, curPsTdma = 28!!
<4>[ 737.500000] [BTCoex], FW write 0x60(5bytes)=0x6925033100
<4>[ 737.500000] RTL871X: call halbtcoutsrc_FillH2cCmd
<4>[ 737.500000] RTL871X: call FillH2CCmd8723B:elementId:0x60
<4>[ 737.500000] RTL871X: MSG_BOX:1, CmdLen(5), CmdID(0x60), reg:0x1d4 =>h2c_cmd:0x03256960, reg:0x1f4 =>h2c_cmd_ex:0x00000031
<4>[ 737.500000] [BTCoex], write Coex Table 0x6c0=0x55555555, 0x6c4=0x55555555, 0x6c8=0xffff, 0x6cc=0x3
<4>[ 737.500000] [BTCoex], preVal0x6c0=0x55555555, preVal0x6c4=0x55555555, preVal0x6c8=0xffff, preVal0x6cc=0x3 !!
<4>[ 737.500000] [BTCoex], curVal0x6c0=0x55555555, curVal0x6c4=0x55555555, curVal0x6c8=0xffff, curVal0x6cc=0x3 !!
<4>[ 737.500000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 737.500000] RTL871X: set_channel_bwmode channel:1 channel_offset:0 bwmode:0
<4>[ 737.513000] x = -1, y = 28
<6>[ 737.513000] mxc622x read x=-1, y=28, z=32
<6>[ 737.513000] mxc622x poll interval 50
<4>[ 737.561000] x = 0, y = 29
<6>[ 737.561000] mxc622x read x=0, y=29, z=32
<6>[ 737.561000] mxc622x poll interval 50
<4>[ 737.562000] RTL871X:
<4>[ 737.562000] ======== Set channel_plan = 0x00 ========
<4>[ 737.619000] x = -1, y = 28
<6>[ 737.619000] mxc622x read x=-1, y=28, z=32
<6>[ 737.619000] mxc622x poll interval 50
<4>[ 737.672000] x = -1, y = 28
<6>[ 737.672000] mxc622x read x=-1, y=28, z=32
<6>[ 737.672000] mxc622x poll interval 50
<4>[ 737.719000] x = 0, y = 29
<6>[ 737.719000] mxc622x read x=0, y=29, z=32
<6>[ 737.719000] mxc622x poll interval 50
<4>[ 737.769000] x = -1, y = 28
<6>[ 737.769000] mxc622x read x=-1, y=28, z=32
<6>[ 737.769000] mxc622x poll interval 50
<4>[ 737.775000] select 1742 (imizer.duplay:p), adj 4, size 4676, to kill
<4>[ 737.775000] select 1781 (er.line.android), adj 8, size 6649, to kill
<4>[ 737.776000] send sigkill to 1781 (er.line.android), adj 8, size 6649
<4>[ 737.819000] x = 0, y = 29
<6>[ 737.819000] mxc622x read x=0, y=29, z=32
<6>[ 737.819000] mxc622x poll interval 50
<4>[ 737.870000] x = -1, y = 29
<6>[ 737.870000] mxc622x read x=-1, y=29, z=32
<6>[ 737.870000] mxc622x poll interval 50
<4>[ 737.920000] x = 0, y = 29
<6>[ 737.920000] mxc622x read x=0, y=29, z=32
<6>[ 737.920000] mxc622x poll interval 50
<3>[ 737.927000] binder: release proc 1781, transaction 40798, not freed
<4>[ 737.972000] x = 0, y = 29
<6>[ 737.972000] mxc622x read x=0, y=29, z=32
<6>[ 737.972000] mxc622x poll interval 50
<4>[ 738.023000] x = 0, y = 30
<6>[ 738.023000] mxc622x read x=0, y=30, z=32
<6>[ 738.023000] mxc622x poll interval 50
<4>[ 738.068000] x = 0, y = 29
<6>[ 738.068000] mxc622x read x=0, y=29, z=32
<6>[ 738.068000] mxc622x poll interval 50
<4>[ 738.121000] x = 1, y = 30
<6>[ 738.121000] mxc622x read x=1, y=30, z=32
<6>[ 738.121000] mxc622x poll interval 50
<4>[ 738.175000] x = 1, y = 29
<6>[ 738.175000] mxc622x read x=1, y=29, z=32
<6>[ 738.175000] mxc622x poll interval 50
<4>[ 738.219000] x = 0, y = 29
<6>[ 738.219000] mxc622x read x=0, y=29, z=32
<6>[ 738.219000] mxc622x poll interval 50
<4>[ 738.270000] x = 0, y = 30
<6>[ 738.270000] mxc622x read x=0, y=30, z=32
<6>[ 738.270000] mxc622x poll interval 50
<4>[ 738.330000] x = 0, y = 29
<6>[ 738.330000] mxc622x read x=0, y=29, z=32
<6>[ 738.330000] mxc622x poll interval 50
<4>[ 738.383000] x = 0, y = 29
<6>[ 738.383000] mxc622x read x=0, y=29, z=32
<6>[ 738.383000] mxc622x poll interval 50
<4>[ 738.433000] x = 0, y = 29
<6>[ 738.433000] mxc622x read x=0, y=29, z=32
<6>[ 738.434000] mxc622x poll interval 50
<4>[ 738.478000] x = 0, y = 30
<6>[ 738.478000] mxc622x read x=0, y=30, z=32
<6>[ 738.478000] mxc622x poll interval 50
<4>[ 738.539000] x = 0, y = 29
<6>[ 738.539000] mxc622x read x=0, y=29, z=32
<6>[ 738.539000] mxc622x poll interval 50
<4>[ 738.548000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 738.548000] [BTCoex], ================BEGIN======================
<4>[ 738.548000] [BTCoex], BTDM start!!
<4>[ 738.548000] [BTCoex], Periodical()===>
<4>[ 738.548000] [BTCoex], 1Ant Periodical!!
<4>[ 738.549000] [BTCoex], High Priority Tx/Rx (reg 0x770)=0x0(0)/0x0(0)
<4>[ 738.549000] [BTCoex], Low Priority Tx/Rx (reg 0x774)=0x0(0)/0x0(0)
<4>[ 738.549000] [BTCoex], bt all counters=0, 1 times!!
<4>[ 738.549000] [BTCoex], Query Bt Info, FW write 0x61=0x1
<4>[ 738.550000] RTL871X: call halbtcoutsrc_FillH2cCmd
<4>[ 738.550000] RTL871X: call FillH2CCmd8723B:elementId:0x61
<4>[ 738.550000] RTL871X: MSG_BOX:2, CmdLen(1), CmdID(0x61), reg:0x1d8 =>h2c_cmd:0x00000161, reg:0x1 =>h2c_cmd_ex:0x00000000
<4>[ 738.550000] [BTCoex], Periodical()<===
<4>[ 738.550000] [BTCoex], BTDM end!!
<4>[ 738.550000] [BTCoex], ================END======================
<4>[ 738.550000] RTL871X: +rtl8723bs_c2h_packet_handler() length=9
<4>[ 738.550000] RTL871X: -rtl8723bs_c2h_packet_handler()
<4>[ 738.551000] RTL871X: C2HPacketHandler_8723B C2hEvent.CmdID:9 C2hEvent.CmdLen:7 C2hEvent.CmdSeq:1
<4>[ 738.551000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 738.551000] [BTCoex], ================BTDM_BtInfoNotify======================
<4>[ 738.551000] [BTCoex], BtInfoNotify()===>
<4>[ 738.551000] [BTCoex], Bt info[0], length=7, hex data=[0x 0, 0x 0, 0x 0, 0x 0, 0x 0, 0x 0, 0x 0]
<4>[ 738.551000] [BTCoex], BtInfoNotify(), bt non-connected idle!!!
<4>[ 738.551000] [BTCoex], RunCoexistMechanism()===>
<4>[ 738.551000] [BTCoex], wifi is non connected-idle !!!
<4>[ 738.551000] [BTCoex], PsTdmaCheckForPS!!bNewPsState:0
<4>[ 738.551000] RTL871X: halbtcoutsrc_LeaveLps()-->Leave LPS 32K!pwrctrl->pwr_mode:0
<4>[ 738.551000] [BTCoex], turn ON PS TDMA, type=28
<4>[ 738.551000] [BTCoex], drv_in_test:0
<4>[ 738.551000] [BTCoex], bPrePsTdmaOn = 1, bCurPsTdmaOn = 1!!
<4>[ 738.551000] [BTCoex], prePsTdma = 28, curPsTdma = 28!!
<4>[ 738.551000] [BTCoex], write Coex Table 0x6c0=0x55555555, 0x6c4=0x55555555, 0x6c8=0xffff, 0x6cc=0x3
<4>[ 738.551000] [BTCoex], preVal0x6c0=0x55555555, preVal0x6c4=0x55555555, preVal0x6c8=0xffff, preVal0x6cc=0x3 !!
<4>[ 738.551000] [BTCoex], curVal0x6c0=0x55555555, curVal0x6c4=0x55555555, curVal0x6c8=0xffff, curVal0x6cc=0x3 !!
<4>[ 738.551000] [BTCoex], RunCoexistMechanism()<===
<4>[ 738.551000] [BTCoex], BtInfoNotify()<===
<4>[ 738.552000] [BTCoex], ================END BTDM_BtInfoNotify======================
<4>[ 738.589000] x = 0, y = 29
<6>[ 738.590000] mxc622x read x=0, y=29, z=32
<6>[ 738.590000] mxc622x poll interval 50
<4>[ 738.640000] x = 0, y = 29
<6>[ 738.640000] mxc622x read x=0, y=29, z=32
<6>[ 738.640000] mxc622x poll interval 50
<4>[ 738.699000] x = 1, y = 30
<6>[ 738.699000] mxc622x read x=1, y=30, z=32
<6>[ 738.699000] mxc622x poll interval 50
<4>[ 738.749000] x = 0, y = 29
<6>[ 738.749000] mxc622x read x=0, y=29, z=32
<6>[ 738.749000] mxc622x poll interval 50
<4>[ 738.798000] x = 0, y = 29
<6>[ 738.798000] mxc622x read x=0, y=29, z=32
<6>[ 738.798000] mxc622x poll interval 50
<4>[ 738.839000] RTL871X: set_channel_bwmode channel:1 channel_offset:0 bwmode:0
<4>[ 738.840000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 738.840000] [BTCoex], SCAN FINISH notify
<4>[ 738.840000] [BTCoex], PsTdmaCheckForPS!!bNewPsState:0
<4>[ 738.840000] RTL871X: halbtcoutsrc_LeaveLps()-->Leave LPS 32K!pwrctrl->pwr_mode:0
<4>[ 738.840000] [BTCoex], turn OFF PS TDMA, type=0
<4>[ 738.840000] [BTCoex], drv_in_test:0
<4>[ 738.840000] [BTCoex], bPrePsTdmaOn = 1, bCurPsTdmaOn = 0!!
<4>[ 738.840000] [BTCoex], prePsTdma = 28, curPsTdma = 0!!
<4>[ 738.840000] [BTCoex], FW write 0x60(5bytes)=0x000000000
<4>[ 738.840000] RTL871X: call halbtcoutsrc_FillH2cCmd
<4>[ 738.840000] RTL871X: call FillH2CCmd8723B:elementId:0x60
<4>[ 738.840000] RTL871X: MSG_BOX:3, CmdLen(5), CmdID(0x60), reg:0x1dc =>h2c_cmd:0x00000060, reg:0x1fc =>h2c_cmd_ex:0x00000000
<4>[ 738.840000] [BTCoex], write Coex Table 0x6c0=0x55555555, 0x6c4=0x55555555, 0x6c8=0xffff, 0x6cc=0x3
<4>[ 738.840000] [BTCoex], preVal0x6c0=0x55555555, preVal0x6c4=0x55555555, preVal0x6c8=0xffff, preVal0x6cc=0x3 !!
<4>[ 738.840000] [BTCoex], curVal0x6c0=0x55555555, curVal0x6c4=0x55555555, curVal0x6c8=0xffff, curVal0x6cc=0x3 !!
<4>[ 738.840000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 738.840000] RTL871X: survey done event(3f)
<4>[ 738.862000] x = -1, y = 29
<6>[ 738.862000] mxc622x read x=-1, y=29, z=32
<6>[ 738.862000] mxc622x poll interval 50
<4>[ 738.925000] x = 1, y = 30
<6>[ 738.925000] mxc622x read x=1, y=30, z=32
<6>[ 738.925000] mxc622x poll interval 50
<4>[ 738.972000] x = 0, y = 29
<6>[ 738.972000] mxc622x read x=0, y=29, z=32
<6>[ 738.972000] mxc622x poll interval 50
<4>[ 739.018000] x = 1, y = 30
<6>[ 739.019000] mxc622x read x=1, y=30, z=32
<6>[ 739.019000] mxc622x poll interval 50
<4>[ 739.053000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 739.053000] [BTCoex], SCAN START notify bWifiConnected:0
<4>[ 739.053000] [BTCoex], PsTdmaCheckForPS!!bNewPsState:0
<4>[ 739.053000] RTL871X: halbtcoutsrc_LeaveLps()-->Leave LPS 32K!pwrctrl->pwr_mode:0
<4>[ 739.053000] [BTCoex], turn ON PS TDMA, type=28
<4>[ 739.053000] [BTCoex], drv_in_test:0
<4>[ 739.053000] [BTCoex], bPrePsTdmaOn = 0, bCurPsTdmaOn = 1!!
<4>[ 739.053000] [BTCoex], prePsTdma = 0, curPsTdma = 28!!
<4>[ 739.053000] [BTCoex], FW write 0x60(5bytes)=0x6925033100
<4>[ 739.053000] RTL871X: call halbtcoutsrc_FillH2cCmd
<4>[ 739.053000] RTL871X: call FillH2CCmd8723B:elementId:0x60
<4>[ 739.054000] RTL871X: MSG_BOX:0, CmdLen(5), CmdID(0x60), reg:0x1d0 =>h2c_cmd:0x03256960, reg:0x1f0 =>h2c_cmd_ex:0x00000031
<4>[ 739.054000] [BTCoex], write Coex Table 0x6c0=0x55555555, 0x6c4=0x55555555, 0x6c8=0xffff, 0x6cc=0x3
<4>[ 739.054000] [BTCoex], preVal0x6c0=0x55555555, preVal0x6c4=0x55555555, preVal0x6c8=0xffff, preVal0x6cc=0x3 !!
<4>[ 739.054000] [BTCoex], curVal0x6c0=0x55555555, curVal0x6c4=0x55555555, curVal0x6c8=0xffff, curVal0x6cc=0x3 !!
<4>[ 739.054000] RTL871X: HALBT_IsBtExist,pHalData->bt_coexist.BluetoothCoexist:1
<4>[ 739.054000] RTL871X: set_channel_bwmode channel:1 channel_offset:0 bwmode:0
<4>[ 739.072000] x = 0, y = 30
<6>[ 739.072000] mxc622x read x=0, y=30, z=32
<6>[ 739.072000] mxc622x poll interval 50
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MocorDroid2.3.5
ro.build.display.id=MocorDroid2.3.5.T6M.GL.MUL.V3.03
ro.build.version.incremental=T6M.GL.MUL.V3.03
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Fri Aug 16 12:32:57 CST 2013
ro.build.date.utc=1376627577
ro.build.type=user
ro.build.user=build
ro.build.host=koobee
ro.build.tags=test-keys
ro.product.model=GL
ro.product.brand=GL
ro.product.name=sprdroid_base
ro.product.device=hsdroid
ro.product.board=t6m_2g_gl
ro.product.cpu.abi=armeabi-v7a
ro.product.hw.version=T6M_02
ro.product.tyd.sw.version=T6M.GL.MUL.0816.V3.03
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=GL
ro.wifi.channels=
ro.board.platform=sprdbp
ro.tyd.ota.language=zh
ro.tyd.ota.flash=null
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hsdroid
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sprdroid_base-user 2.3.5 MocorDroid2.3.5 T6M.GL.MUL.V3.03 test-keys
ro.build.fingerprint=GL/sprdroid_base/hsdroid:2.3.5/MocorDroid2.3.5/T6M.GL.MUL.V3.03:user/test-keys
persist.sys.timezone=Asia/Shanghai
ro.product.carrier=
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.msms.phone_count=2sim
persist.sys.testdeviceid=0
persist.sys.testdeviceapp=0
# end build properties
#
# system.prop for hsdroid
#
#rild.libpath=/system/lib/libsp_ril.so
#wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 48
android.keylayout.sprd-keypad = /system/usr/keylayout/sprd-keypad.kl
android.keychar.sprd-keypad = /system/usr/keychars/sprd-keypad.kcm
ro.hardware =sphs
# Default network type
# 2 => AUTO Preferred.
ro.telephony.default_network = 2
# 1 => add volume control in in-call screen
ro.sprd.volume_control_icon = 1
#LCD_Density for WGVA
ro.sf.lcd_density = 240
ro.sf.lcd_width = 45
ro.sf.lcd_height = 75
dalvik.vm.heapsize=32m
ro.opengles.version=131072
ro.internalstorage.threshold=95
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=Heaven.ogg
ro.config.ringtone0=BeatPlucker.ogg
ro.config.ringtone1=BeatPlucker.ogg
ro.config.alarm_alert=Alarm_Buzzer.ogg
persist.sys.language=en
persist.sys.country=US
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
8723bs 1074215 0 - Live 0xbf1b2000
headset 3345 0 - Live 0xbf0a3000
tmd2771_pls 15556 0 - Live 0xbf099000
snd_dummy 9403 0 - Live 0xbf090000
mali 260928 2 - Live 0xbf03f000
ump 54201 15 mali, Live 0xbf029000
kt0812g_fm_ctrl 29506 0 - Live 0xbf01a000
ft5206_ts 40990 0 - Live 0xbf009000
mxc622x 10789 1 - Live 0xbf000000
RAM: 256 MB (233 MB available)
System RAM: 233.242MB
Flash: 0.5 GB (0.447 GB actual)
mtdblock: 0.046 GB
mtdblock1: 0.447 GB
Touch Screen for GL
$11.05 Kinco MT/GL/GT Touch Screen Connected to FX PLC Communication Cable Round Port MD8 Pin to 9-Hole RS422 cable
$6.86 New touch P/N DH-10103A1-PG-FPC286 9''Inch Tablet PC Touch Screen Digitizer Glass Panel For Thomson HERO9-1.32B HERO9.2BK32
$8.26 wholesale 10Pcs For Xiaomi Poco F3 F1 F2 F4 M2 M3 M5 X2 X3 X4 Pro 5G GT NFC C3 C31 LCD Front Touch Screen Lens Glass with OCA Gl
$6.77 Outdoor Waterproof Sport Touch Screen Gloves Full Finger Tactical Gloves for Hunting Anti-Skid Cycling Climbing Hiking
$9.99 Outdoor sports tactical gloves Men's riding gloves Bicycle all finger motorcycle racing protective gloves Anti slip screen touch
$69 Slip gloves black non-slip cycling touch screen four seasons male and female mountain bike accessories equipped with downhill gl
$6.77 Men Touch Screen Full Finger Gloves Cycling Climbing Gloves Outdoor sport Tactical Gloves Airsoft Paintball Gloves
$6.76 Full Finger Sport Gloves Outdoor Touch Screen Gloves Men Tactical Hunting Gloves Cycling Climbing Waterproof Glove
$11.05 Kinco MT/GL/GT Touch Screen Connected to FX PLC Communication Cable Round Port MD8 Pin to 9-Hole RS422 cable
$8.19 Touch Screen Hard Knuckle Tactical Gloves Microfiber Army Military Combat Airsoft Outdoor Sport Hiking Paintball Hunting Gloves
$11.21 Multicam Outdoor Tactical Gloves Touch Screen Full Finger Sport Gloves Outdoor Cycling Motorcycle Mountaineering Gloves
$38.74 fistplast touchscreen high-value off-road riding off-road motorcycle cross-border foreign trade wear-resistant outdoor sports gl
$11 Outdoor Tactical Gloves Airsoft Paintball Full Finger Gloves Men Touch Screen Gloves Waterproof Climbing Gloves
$4.99 New 7 inch Digitizer Touch Screen Panel For Digma iDnD7 / GlobusGPS GL-700/IconBit NetTab Sky 3G Duo /ZTE E9 186*113mm
$5.2 For GlobusGPS GL-800 Resistive Touch Screen Panel Digitizer
$3 Kinco MT4000/5000 GL series HMI touch screen connect PLC program cable communication between the PLC and HMI
$9.99 Men's outdoor army sports combat gloves, bicycles, full finger motorcycles, racing protective equipment, anti-skid touch screen
$7.38 DC:2019+ 100% New N16S-GMR-S-A2 N16S GMR S A2 N15V-GL-S-A2 N15V GL S A2 N16S-LG-S-A2 N16S LG S A2
$32.47 New Unnisex 3 In 1 Winter Warm Ribbed Knit Beanie Hat Long Scarf for Touch Screen Gl
$6.89 Touch Screen Tactical Gloves Combat Full Finger Gloves Men Multicam Camouflage Hiking Cycling Climbing Gloves
Replacement Battery for GL
$2.37 BL 5C BL5C BL-5C 3.7V Lithium Polymer Phone Battery For Nokia 1100 1110 1200 1208 1280 2600 2700 3100 3110 5130 6230 1600
$2.37 3.7V 1020mAh 1200mah Battery BL-5C BL 5C For Nokia 6267 6270 6330 6555 6600 6620 6630 1100 1101 1110 1112 1208 1600
$2.54 3.7V 250mAh 502030 Lithium Polymer LiPo Rechargeable Battery For VXI Blueparrott B250-XT B350-XT B450-XT Wireless Headset Watch
$2.05 GTF 3.7V BL-5C 1020mAh Phone Battery for Nokia battery small speaker with card radio battery Li-ion Cell Batteries for 1110 1200
$10.61 Tuya Home Smoke Detector WiFi Fire Protection Security Sound Alarm Sensor Wireless Battery Operated Smart Life APP Push Alert
$11.7 1Pcs 3.7V 1020mAh Battery BL-5C BL5C BL 5C Rechargeable Batteries For Nokia 2112 2118 2255 2270 2280 2300 2600 2610 3125 3230
$2.54 3.7V 120mAh LiPo Rechargeable Battery 402020 JST 3Pin Plug 1.0/1.25/1.5/2.0 For Mp3 GPS Bluetooth Headphone Headset Smart Watch
$2.37 BL 5C BL5C BL-5C 3.7V Lithium Polymer Phone Battery For Nokia 1100 1110 1200 1208 1280 2600 2700 3100 3110 5130 6230 1600
$2.54 3.7V 200mAh Lipo Rechargeable Battery 402030 JST 2.0mm 3Pin Plug For Smart Watch Bracelet LED Light GPS MP3 Recorder
$11.7 3.7V 600mAh Battery BL-5C BL5C BL 5C Rechargeable Batteries For Nokia 2112 2118 2255 2270 2280 2300 2600 2610 3125 3230 1pcs
$11.7 3.7V 800mAh Battery BL-5C BL5C BL 5C Rechargeable Batteries For Nokia 2112 2118 2255 2270 2280 2300 2600 2610 3125 3230 1pcs
$2.69 3.7V 1200mAh Battery BL-5C BL5C BL 5C Rechargeable Batteries For Nokia 2112 2118 2255 2270 2280 2300 2600 2610 3125 3230 1pcs
$2.77 Mini White 3 5mm Pillow Speaker For i-Phone i-Pod CD Radio MP3 Player GL
$3.33 1 Pcs A/C Air Conditioning Vent Paddle Outlet Clip Tab Repair Kit for Mercedes for Benz W164 X164 ML GL Plastic
$28.59 1~5pcs/lot Micro switch Small travel limit switch 3 pin SS5-GL with handle swing rod SS5GL
$12.74 Mini White 3 5mm Pillow Speaker For iPhone iPod CD Radio MP3 Player GL
$9.66 3.7V 1200mAh Battery BL-5C BL5C BL 5C Rechargeable Batteries For Nokia 2112 2118 2255 2270 2280 2300 2600 2610 3125 3230 Hot
$1.62 for Mercedes Benz Front Left Right Air Vent Tabs, Front Row Air Grille Tabs Clip for W166 Ml Gle Class X166 Gl Gls Class
$18.69 DVR 042035 3.7V 402035 Lithium Polymer LiPo battery with 3Pin JST for Handheld GPS Mp3 Bluetooth Xiaomi Yi smart dash camera
$1.77 Mini White 3 5mm Pillow Speaker For iPhone iPod CD Radio MP3 Player GL
Cover Cases for GL
$0.58 Face Concealer Pen Long Lasting Cover Dark Circles Face Contour Makeup Corrector Brighten Stick High Cosmetic Concealers Gl T7m0
$3.17 Transparent Key Fob Case Holder for MercedesBenz A/B/C/E/S/G/M/V/CLA/CLS/GLA/GLC/GLE/GLK/GL/GLS/SL/SLK/Viano/Metris
$0.5 Q0KB Face for Protection Soft Cotton Foots Ankle Socks Foot Covers Anti Scratching Gl
$4.37 Car Console Multimedia Volume Button Trim Sequins Cover Sticker For Mercedes Benz A B C E GLA CIA ML GL SLK W176 W245 W204 W212
$3.79 Transparent Key Fob Case Holder for MercedesBenz A/B/C/E/S/G/M/V/CLA/CLS/GLA/GLC/GLE/GLK/GL/GLS/SL/SLK/Viano/Metris
$1.95 Car Windshield Wiper Fluid Reservoir Cover Water Tank Bottle Cap For Mercedes C E S CLS GL GLK ML SLK GLE SLS Class 1718690108
$0.34 Universal Hot Silicone Car Key Cover Case Shell Fob For Volkswagen VW Golf 7 mk7 Car Key Decoration Styling
$1.95 Car Windshield Wiper Fluid Reservoir Cover Water Tank Bottle Cap For Mercedes C E S CLS GL GLK ML SLK GLE SLS Class 1718690108
$3.08 For Goldwing1800 GL1800 Motorcycle Accessories CNC Aluminum Wheel Tire Valve Caps Airtight Covers goldwing gl 1800
$0.47 4pc Auto Door Lock Buckle For Mercedes Benz A-Class B-Class C-Class E-Class S-Class R-Class G-Class Silicone Car Door Lock Cover
$4.14 Transparent Car Key Case Holder for MercedesBenz A/B/C/E/S/G/M/V/CLA/CLS/GLA/GLC/GLE/GLK/GL/GLS/SL/SLK/Viano/Metris
$4.99 Tactical Rubber Grip Anti Slip Glove Holster Holster Suitable for AR15 Glock Glock17 19 20 21 22 23 34 43 1911 Holster Gun Case
$1.6 Car Auto Sun Visor Glasses Sunglasses Clip For Benz A B C E S G GLE GLC CL CLK CLS GL GLK R SL SLK class W211 W221 W220 W163 W16
$3.31 Car-styling Snow Shovel Ice Removal Tool case For Mercedes-Benz all class A B C E S G M ML CL CLK CLS GL GLK R SL SLK SLS-Series
$3.11 Transparent Key Fob Cover Case for MercedesBenz A/B/C/E/S/G/M/V/CLA/CLS/GLA/GLC/GLE/GLK/GL/GLS/SL/SLK/Viano/Metris
$0.47 4Pcs Car Door Lock Cover For Mercedes Benz ML-Class GL-Class GLA-Class GLC-Class GLK-Class GLS Class X Class Silent Shock Pads
$1.95 Car Windshield Wiper Fluid Reservoir Cover Water Tank Bottle Cap For Mercedes C E S CLS GL GLK ML SLK GLE SLS Class 1718690108
$0.66 Car License Plate Light Housing Rear View Camera Bracket Mounting Holder for Mercedes-Benz GLK Class X204 MB GL X164 2012-2013
$2.43 Y1UB 2048800227 Car Engine Hood Spring Cover for- C GLK SL Class W204 W212 R231
$1.95 Car Windshield Wiper Fluid Reservoir Cover Water Tank Bottle Cap For Mercedes C E S CLS GL GLK ML SLK GLE SLS Class 1718690108
| Find Similar devices | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
