- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | e1809c_v75_hlx1_5647 |
Versión de Android | 4.0.3; eng.root.1341486996; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Pantalla | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
RAM | 512 MB (486 MB available) |
Flash | 4 GB (3.631 GB actual); 32 GB (28.914 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM; Net: HSDPA |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Cámara trasera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; Flash modes: off |
Sensores | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3992 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (root@abc-desktop) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Jul 5 19:16:22 CST 2012
CODENAME: REL
Mainboard: e1809c_v75_hlx1_5647
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: e1809c_v75_hlx1_5647
DISPLAY: AGOLD_EMPTY
FINGERPRINT: alps/e1809c_v75_hlx1_5647/e1809c_v75_hlx1_5647:4.0.3/IML74K/1341486996:user/test-keys
HARDWARE: mt6575
ID: IML74K
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<5>[23040.649517] [Power/Alarm] alarm 2 set 59123.473000000
<5>[23040.657867] [Power/Alarm] alarm wait (0x0)
<7>[23040.682156] [12178:Thread-490] exit
<7>[23040.692008] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 9528615 > 8ms
<7>[23040.692041] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[23040.694329] [12183:Thread-492] exit
<7>[23040.747006] [12206:dmesg] exit
<7>[23040.747174] [12206:dmesg] sig 17 to [12187:AsyncTask #2]
<7>[23040.909166] [280:WifiStateMachin] fork err at pid
<7>[23040.909190] [280:WifiStateMachin] fork [12208:WifiStateMachin]
<7>[23040.909956] [12208:WifiStateMachin] set proc[12208] name: ->[loadDriverThrea]
<6>[23040.913243] [WLAN] rfkill_set_block(blocked 0)
<6>[23040.913254] [WLAN] Power on
<3>[23040.913266] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[23040.914044] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[23040.914080] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[23040.915146] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[23040.915893] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[23040.916595] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[23040.917376] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[23040.920478] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO185)
<3>[23040.921374] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[23040.922113] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO184)
<3>[23040.922882] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(11)
<3>[23040.923640] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[23040.924498] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[23040.925226] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[23040.925951] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[23040.926677] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[23040.927391] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[23040.928174] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(not defined)
<3>[23040.928944] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(not defined)
<3>[23040.929724] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(not defined)
<3>[23040.976121] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[23040.976874] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(not defined)
<3>[23040.977664] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[23040.985897] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[23040.994113] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[23040.994898] [WMT-PLAT][W]wmt_plat_gps_lna_ctrl:host gps lna pin not defined!!!
<3>[23040.995789] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<7>[23041.001844] [238:er.ServerThread] fork err at pid
<7>[23041.001869] [238:er.ServerThread] fork [12209:er.ServerThread]
<7>[23041.009800] [12209:er.ServerThread] set proc[12209] name: ->[Thread-407]
<7>[23041.012342] [12209:Thread-407] exit
<3>[23041.198577] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[23041.199367] [WMT-PLAT][E]wmt_plat_i2s_ctrl(1065):[MT6620]Error:FM digital mode set, but no I2S GPIOs defined
<3>[23041.200583] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[23041.201532] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[23041.202565] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[23041.202570]
<3>[23041.204956] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[23041.206051] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[23041.207107] mt6575_get_bus_freq() return 192400
<3>[23041.218154] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[23041.218897] Flush type = 4 Rx Queue
<3>[23041.219497] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[23041.220303] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[23041.220315] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[23041.220954] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[23041.221649] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[23041.222342] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[23041.223145] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[23041.223154] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[23041.223165] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[23041.228709] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[23041.235052] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[23041.241485] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[23041.242426] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[23041.243466] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[23041.244667] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[23041.256064] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[23041.256873] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[23041.262423] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[23041.267151] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[23041.268406] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120320180900
<3>[23041.269344] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[23041.270144] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[23041.270946] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[23041.271747] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[23041.272548] [WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[23041.418511] [150:netd] fork err at pid
<7>[23041.418534] [150:netd] fork [12210:netd]
<7>[23041.515570] [12210:netd] exit
<3>[23041.596914] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 752) ok
<3>[23041.597879] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[23041.601056] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12d030)
<3>[23041.606010] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[23041.607030] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[23041.607044] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[23041.607056] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[23041.620126] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[23041.620796] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[23041.620809] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[23041.620821] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[23041.621491] board_sdio_ctrl force off before on
<6>[23041.621498] mtk_wcn_cmb_sdio_off (3)
<6>[23041.621538] mtk_wcn_cmb_sdio_on (3)
<3>[23041.621572] msdc3 -> USR Resume <- msdc_pm() : L<1260> PID
<7>[23041.624788] [12180:com.specdevice] exit
<3>[23041.638304] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[23041.639334] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[23041.640975] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<5>[23041.649975] [Power/Alarm] alarm 2 set 0.000000000
<5>[23041.650584] [Power/Alarm] alarm_timer_triggered type 2 at 59118.217078402 (1)
<5>[23041.652425] [Power/Alarm] alarm 2 set 59123.473000000
<5>[23041.657331] [Power/Alarm] alarm wait (0x0)
<3>[23041.666864] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1320> PID
<7>[23041.673862] [6994:Thread-370] fork err at pid
<7>[23041.673886] [6994:Thread-370] fork [12211:Thread-370]
<7>[23041.681950] [12211:Thread-370] set proc[12211] name: ->[Thread-416]
<7>[23041.685806] [12211:Thread-416] exit
<3>[23041.700132] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3218> PID
<3>[23041.701302] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[23041.702326] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[23041.703991] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[23041.706827] mmc2: new high speed SDIO card at address 0001
<6>[23041.708700] [WMT-DFT][I]hif_sdio_probe:start!
<6>[23041.708714] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[23041.708724] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[23041.708734] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[23041.708741] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[23041.708841] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[23041.708869] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 83809615 > 8ms
<7>[23041.708885] work: mmc_rescan+0x0/0x370
<6>[23041.778139] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[23041.778251] [2:kthreadd] fork err at pid
<7>[23041.778272] [2:kthreadd] fork [12212:kthreadd]
<6>[23041.779012] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[23041.779044] [wlan] net_device prDev(0xdce26000) allocated
<4>[23041.780348] [RT_MONITOR]WARNNING [12212:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [12212:ksdioirqd/mmc2]
<4>[23041.782080] Backtrace:
<4>[23041.782476] [
<4>[23041.784106] r7:00000001 r6:00000000 r5:c8b50000 r4:d8687800
<4>[23041.784964] [
<5>[23041.786750] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[23041.787818] [
<4>[23041.789073] [
<4>[23041.790221] [
<4>[23041.791261] [
<5>[23041.792749] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[23041.793584] [wlan] Virtual Address = e4f3d000 for COMMON MGMT MEMORY POOL.
<5>[23041.794428] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[23041.795111] [wlan] Virtual Address = e4f3f000 for SW_RFB_T.
<5>[23041.795791] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[23041.796481] [wlan] Virtual Address = e4f43000 for MSDU_INFO_T.
<6>[23041.797200] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<7>[23041.797806] [9443:Smack Packet Wr] exit
<4>[23041.797887] r7:00000013 r6:c0087f5c r5:c009f5dc r4:dc963d78
<6>[23041.808223] [wlan] Chip ID: 0x6620
<6>[23041.808236] [wlan] Revision ID: 0x1
<6>[23042.469127] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[23042.525484] [150:netd] fork err at pid
<7>[23042.525511] [150:netd] fork [12213:netd]
<7>[23042.649472] WQ_WARN: cpu:1, proc:kworker/u:3, dur: 10634615 > 8ms
<7>[23042.649507] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[23042.654661] [12213:netd] exit
<7>[23042.802872] [12154:ReferenceQueueD] exit
<7>[23042.803045] [12156:FinalizerDaemon] exit
<7>[23042.803188] [12157:FinalizerWatchd] exit
<7>[23042.822398] [94:zygote] fork err at pid
<7>[23042.822430] [94:zygote] fork [12214:zygote]
<7>[23042.827434] [94:zygote] fork err at pid
<7>[23042.827457] [94:zygote] fork [12215:zygote]
<7>[23042.829483] [12214:zygote] fork err at pid
<7>[23042.829506] [12214:zygote] fork [12216:zygote]
<7>[23042.832408] [12216:zygote] set proc[12216] name: ->[GC]
<7>[23042.833163] [12215:zygote] set proc[12215] name: ->[ReferenceQueueD]
<7>[23042.833567] [94:zygote] fork err at pid
<7>[23042.833589] [94:zygote] fork [12217:zygote]
<7>[23042.833813] [12214:zygote] fork err at pid
<7>[23042.833831] [12214:zygote] fork [12218:zygote]
<7>[23042.838419] [12218:zygote] set proc[12218] name: ->[Signal Catcher]
<7>[23042.839522] [12217:zygote] set proc[12217] name: ->[FinalizerDaemon]
<7>[23042.840343] [12214:zygote] fork err at pid
<7>[23042.840365] [12214:zygote] fork [12219:zygote]
<7>[23042.840672] [94:zygote] fork err at pid
<7>[23042.840691] [94:zygote] fork [12220:zygote]
<7>[23042.840776] [12219:zygote] set proc[12219] name: ->[Compiler]
<7>[23042.847571] [12220:zygote] set proc[12220] name: ->[FinalizerWatchd]
<6>[23042.850975] [wlan] Ready bit asserted
<7>[23042.857648] [12214:zygote] fork err at pid
<7>[23042.857671] [12214:zygote] fork [12221:zygote]
<7>[23042.858405] [12221:zygote] set proc[12221] name: ->[ReferenceQueueD]
<7>[23042.858881] [12214:zygote] fork err at pid
<7>[23042.858901] [12214:zygote] fork [12222:zygote]
<7>[23042.861464] [12222:zygote] set proc[12222] name: ->[FinalizerDaemon]
<7>[23042.861930] [12214:zygote] fork err at pid
<7>[23042.861952] [12214:zygote] fork [12223:zygote]
<7>[23042.864855] [12223:zygote] set proc[12223] name: ->[FinalizerWatchd]
<5>[23042.872439] [wlan] [wifi] wlan%d netif_carrier_off
<6>[23042.873028] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[23042.873097] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[23042.873151] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[23042.874815] [2:kthreadd] fork err at pid
<7>[23042.874838] [2:kthreadd] fork [12224:kthreadd]
<5>[23042.878195] [wlan] tx_thread starts running...
<6>[23042.880654] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[23042.880668] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[23042.880685] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[23042.882274] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[23042.882283]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[23042.884059] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[23042.884849] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[23042.885633] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[23042.886837] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[23042.886844]
<4>[23042.887937] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<7>[23042.889501] [12214:zygote] set proc[12214] name: ->[d.apps.uploader]
<4>[23042.893777] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[23042.893788]
<3>[23042.894961] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[23042.913367] WQ_WARN: cpu:1, proc:kworker/u:0, dur: 10244923 > 8ms
<7>[23042.913402] work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[23043.064134] [12214:d.apps.uploader] fork err at pid
<7>[23043.064161] [12214:d.apps.uploader] fork [12225:d.apps.uploader]
<7>[23043.064932] [12214:d.apps.uploader] set proc[12214] name: ->[re-initialized>]
<7>[23043.068356] [12225:d.apps.uploader] set proc[12225] name: ->[Binder Thread #]
<7>[23043.068759] [12225:Binder Thread #] fork err at pid
<7>[23043.068783] [12225:Binder Thread #] fork [12226:Binder Thread #]
<7>[23043.068844] [12226:Binder Thread #] set proc[12226] name: ->[Binder Thread #]
<7>[23043.257240] [12208:loadDriverThrea] exit
<7>[23043.273182] [151:netd] fork err at pid
<7>[23043.273210] [151:netd] fork [12227:netd]
<7>[23043.280809] [12214:re-initialized>] set proc[12214] name: ->[d.apps.uploader]
<7>[23043.283121] [12227:netd] set proc[12227] name: ->[ip]
<7>[23043.304433] [12227:ip] exit
<7>[23043.304623] [12227:ip] sig 17 to [151:netd]
<7>[23043.311095] [11664:kworker/u:0] fork err at pid
<7>[23043.311121] [11664:kworker/u:0] fork [12228:kworker/u:0]
<7>[23043.311790] [12228:kworker/u:0] fork err at pid
<7>[23043.311810] [12228:kworker/u:0] fork [12229:kworker/u:0]
<7>[23043.313969] [12229:kworker/u:0] exit
<7>[23043.314003] [12229:kworker/u:0] sig 17 to [12228:kworker/u:0]
<7>[23043.314041] [12228:kworker/u:0] exit
<6>[23043.325157] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[23043.325184] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[23043.338782] [1:init] fork err at pid
<7>[23043.338808] [1:init] fork [12230:init]
<7>[23043.340863] WQ_WARN: cpu:0, proc:kworker/0:2, dur: 14860385 > 8ms
<7>[23043.340936] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[23043.343370] [12230:init] set proc[12230] name: ->[logwrapper]
<7>[23043.371470] [280:WifiStateMachin] fork err at pid
<7>[23043.371493] [280:WifiStateMachin] fork [12231:WifiStateMachin]
<7>[23043.379420] [12231:WifiStateMachin] set proc[12231] name: ->[WifiMonitor]
<7>[23043.391215] [12230:logwrapper] fork err at pid
<7>[23043.391242] [12230:logwrapper] fork [12232:logwrapper]
<7>[23043.399554] [12232:logwrapper] set proc[12232] name: ->[wpa_supplicant]
<5>[23043.448610] [wlan] N=0 closed
<5>[23043.449024] [wlan] EVENT-ROAMING ABORT: Current Time = 20928200
<5>[23043.449761] [wlan] [13] TRANSITION: [0] -> [0]
<6>[23043.451770] [wlan] NAF=0,0,0
<6>[23043.451784] [wlan] NAF=0,0,0
<7>[23043.457239] [12214:d.apps.uploader] fork err at pid
<7>[23043.457264] [12214:d.apps.uploader] fork [12233:d.apps.uploader]
<7>[23043.457343] [12233:d.apps.uploader] set proc[12233] name: ->[RefQueueWorker@]
<7>[23043.469226] [12214:d.apps.uploader] fork err at pid
<7>[23043.469251] [12214:d.apps.uploader] fork [12234:d.apps.uploader]
<7>[23043.469295] [12234:d.apps.uploader] set proc[12234] name: ->[Thread-486]
<7>[23043.504077] [12214:d.apps.uploader] fork err at pid
<7>[23043.504102] [12214:d.apps.uploader] fork [12235:d.apps.uploader]
<7>[23043.504160] [12235:d.apps.uploader] set proc[12235] name: ->[SharedPreferenc]
<7>[23043.512491] [12235:SharedPreferenc] exit
<7>[23043.571779] [7351:ndroid.settings] fork err at pid
<7>[23043.571805] [7351:ndroid.settings] fork [12236:ndroid.settings]
<7>[23043.577343] [12236:ndroid.settings] set proc[12236] name: ->[IntentService[A]
<7>[23043.581871] [223:system_server] sig 9 to [10487:ActivityNetwork]
<7>[23043.582528] [10488:GC] exit
<7>[23043.582575] [10489:Signal Catcher] exit
<7>[23043.582602] [10490:Compiler] exit
<7>[23043.582628] [10492:ReferenceQueueD] exit
<7>[23043.582778] [10495:FinalizerWatchd] exit
<7>[23043.582818] [10497:Binder Thread #] exit
<7>[23043.582853] [10498:Binder Thread #] exit
<7>[23043.582879] [10493:FinalizerDaemon] exit
<7>[23043.582905] [10487:ActivityNetwork] exit
<7>[23043.593649] [1191:Binder Thread #] fork err at pid
<7>[23043.593675] [1191:Binder Thread #] fork [12237:Binder Thread #]
<7>[23043.595071] [10492:ReferenceQueueD] sig 17 to [94:zygote]
<7>[23043.595231] [12237:Binder Thread #] set proc[12237] name: ->[executeAppTrans]
<7>[23043.603237] [12237:executeAppTrans] exit
<7>[23043.603485] [12236:IntentService[A] exit
<5>[23043.610908] [wlan] [13] TRANSITION: [0] -> [2]
<7>[23043.732575] [7351:ndroid.settings] fork err at pid
<7>[23043.732606] [7351:ndroid.settings] fork [12238:ndroid.settings]
<7>[23043.756577] [12238:ndroid.settings] set proc[12238] name: ->[IntentService[A]
<5>[23043.786570] [Power/Alarm] alarm 0 set 1375596603.008000000
<7>[23043.813167] [12238:IntentService[A] exit
<7>[23043.982637] [12187:AsyncTask #2] fork err at pid
<7>[23043.982665] [12187:AsyncTask #2] fork [12239:AsyncTask #2]
<7>[23043.990410] [12239:AsyncTask #2] set proc[12239] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=AGOLD_EMPTY
ro.build.version.incremental=eng.root.1341486996
ro.custom.build.version=1341486996
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=2012年 07月 05日 星期四 19:17:50 CST
ro.build.date.utc=1341487070
ro.build.type=user
ro.build.user=root
ro.build.host=abc-desktop
ro.build.tags=test-keys
ro.product.model=e1809c_v75_hlx1_5647
ro.product.brand=alps
ro.product.name=e1809c_v75_hlx1_5647
ro.product.device=e1809c_v75_hlx1_5647
ro.product.board=e1809c_v75_hlx1_5647
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e1809c_v75_hlx1_5647
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=e1809c_v75_hlx1_5647-user 4.0.3 IML74K eng.root.1341486996 test-keys
ro.build.fingerprint=alps/e1809c_v75_hlx1_5647/e1809c_v75_hlx1_5647:4.0.3/IML74K/1341486996:user/test-keys
ro.build.flavor=
persist.sys.timezone=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V1.11
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
ro.config.notification_sound=Aldebaran.ogg
ro.config.alarm_alert=Beeps.mp3
ro.config.ringtone=ANDROMEDA.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 285284 0 - Live 0xbf1e3000 (P)
cfg80211 122425 0 - Live 0xbf1ba000
mtk_fm_priv 8909 0 - Live 0xbf1b4000 (P)
mt6620_fm_drv 111369 1 mtk_fm_priv, Live 0xbf18c000
mtk_stp_bt 39718 0 - Live 0xbf17f000
mtk_stp_gps 37190 0 - Live 0xbf172000
mtk_stp_uart 21669 1 - Live 0xbf169000 (P)
mtk_stp_wmt 343806 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf108000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf0ff000
devinfo 748 0 - Live 0xbf0fb000 (P)
sec 109563 0 - Live 0xbf0da000 (P)
mt6575_vcodec_kernel_driver 23817 0 - Live 0xbf0cf000 (P)
mt6575_m4u 108821 6 - Live 0xbf0ab000 (P)
ccmni 17214 0 - Live 0xbf0a2000 (P)
ccci 137954 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125084 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163615 85 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.631 GB actual); 32 GB (28.914 GB actual)
mmcblk0: 3.631 GB
mmcblk1: 28.914 GB
Pantalla táctil para alps e1809c_v75_hlx1_5647
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Batería de repuesto para alps e1809c_v75_hlx1_5647
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Fundas para alps e1809c_v75_hlx1_5647
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |