samsung SM-G9250 Specification

3 Steps to publish Your specification here:

1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)

General
OS details
CPU info
GPU extensions
WiFi kernel messages
build.prop
Modules
Memory map

General Specifications
Manufacturer	samsung
Model	SM-G9250
Firmware	5.0.2; G9250ZCU1AOF8; SDK21
CPU	4 cores; UNIVERSAL5410 exynos5; Max: 1600,0 MHz; Min: 250,0 MHz
Display	1920 x 1080; DPI: 480; Evaluated Size: 4,6"
Touch screen	Multitouch 4 points
GPU	PowerVR SGX 544MP; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.10@2359475
RAM	2048 MB (2045 MB available)
Flash	16 GB Build-in (14.676 GB actual); 1.000 GB
Communications
Phone	GSM; Net: HSDPA
WiFi	IEEE 802.11 b/g/n; Broadcom 4329/30; AP Mode
USB Host	Yes
Bluetooth	Bluetooth® >= 2.1
GPS	Yes
Advanced Features
Front camera	Photo: 12.8 MP; Max: 4128x3096; Video: 2.1 MP; Max: 1920x1080; Focus: auto macro continuous-picture continuous-video; Flash modes: off auto on torch
Back camera	Photo: 2.1 MP; Max size: 1920x1080; Video: 2.1 MP; Max: 1920x1080; Focus: infinity fixed; Flash modes: off
Sensors	K330 Acceleration Sensor (STMicroelectronics); range: 0...19,613; resolution: 0,001 (0,003%); power: 0,25mA;
	AK8963C Magnetic field Sensor (Asahi Kasei Microdevices); range: 0...2000; resolution: 0,06 (0,003%); power: 6mA;
	K330 Gyroscope Sensor (STMicroelectronics); range: 0...8,727; resolution: 0 (0,004%); power: 6,1mA;
	BMP182 Barometer Sensor (BOSCH); range: 0...1000; resolution: 1 (0,1%); power: 1mA;
	MAX88005 Proximity Sensor (Maxim); range: 0...8; resolution: 5 (62,5%); power: 0,75mA;
	CM3323 Light Sensor (Capella Microsystems, Inc.); range: 0...60000; resolution: 1 (0,002%); power: 0,75mA;
	SHTC1 relative humidity sensor (Sensirion); range: 0...100; resolution: 0,04 (0,04%); power: 0,3mA;
	SHTC1 ambient temperature sensor (Sensirion); range: 0...165; resolution: 0,01 (0,006%); power: 0,3mA;
	Rotation Vector Sensor (AOSP); range: 0...1; resolution: 0 (0%); power: 12,35mA;
	Gravity Sensor (AOSP); range: 0...19,613; resolution: 0,001 (0,003%); power: 12,35mA;
	Linear Acceleration Sensor (AOSP); range: 0...19,613; resolution: 0,001 (0,003%); power: 12,35mA;
Vibrator	Yes
Supported languages	174; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bengali; Tibetan; Breton; Bodo; Bosnian; Catalan; Chiga; Cherokee; Czech; Welsh; Danish; Taita; German; Zarma; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Irish; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Cornish; Kyrgyz; Langi; Ganda; Lakota; Lingala; Lao; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Meta'; Macedonian; Malayalam; Mongolian; Marathi; Malay; Maltese; Mundang; Burmese; Nama; Norwegian; North Ndebele; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Oriya; Punjabi; Polish; Pashto; Portuguese; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Samburu; Sangu; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Congo Swahili; Tamil; Telugu; Teso; Tajik; Thai; Tigrinya; Turkmen; Tongan; Turkish; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Soga; Yangben; Yoruba; Standard Moroccan Tamazight; Chinese; Zulu
Battery	Technology: Li-ion; Voltage: 3551
FM radio	76MHz to 108MHz
SD Version:	1.1 7

KERNEL: Linux version 3.4.5-v1.3 (root@king.z) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sat Jun 27 23:50:56 CST 2015
CODENAME: REL
Mainboard: universal5410
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: zerolte
DISPLAY: Aurora.Full-S6.Port.No.7.0
FINGERPRINT: samsung/zeroltexx/zerolte:5.0.2/LRX22G/G9250ZCU1AOF8:user/release-keys
HARDWARE: universal5410
ID: LRX22G
TAGS: release-keys

Processor : ARMv7 Processor rev 3 (v7l)
processor : 0
BogoMIPS : 1590.88
processor : 1
BogoMIPS : 1590.88
processor : 2
BogoMIPS : 1590.88
processor : 3
BogoMIPS : 1590.88
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc0f
CPU revision : 3
Hardware : UNIVERSAL5410
Revision : 000a
Serial : aa8040d54d005d02

GL_EXT_debug_marker
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_OES_texture_npot
GL_EXT_discard_framebuffer
GL_EXT_blend_minmax
GL_EXT_multi_draw_arrays
GL_EXT_multisampled_render_to_texture
GL_EXT_shader_texture_lod
GL_EXT_texture_format_BGRA8888
GL_EXT_occlusion_query_boolean
GL_EXT_texture_rg
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_compression_pvrtc2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_uniform_buffer_object
GL_IMG_multisampled_render_to_texture

<6>[ 4185.800519] B0 19092 PVR_K: SGX change clock [266] Mhz -> [177] MHz req [177] MHz / M[800] / B[4]
<6>[ 4185.800574] B0 19092 PVR_K: SGX change voltage [900000] -> [900000] mV
<6>[ 4185.800746] B0 19092 PVR_K: SGX CCB RO : 141, WO : 141, Total : 33
<4>[ 4185.860631] B3 20967
<4>[ 4185.860662] B3 20967 Dongle Host Driver, version 1.141.64.13 (r)
<4>[ 4185.860717] B3 20967 Compiled in drivers/net/wireless/bcmdhd on Jun 27 2015 at 23:38:56
<4>[ 4185.860809] B3 20967 wl_android_wifi_on in
<4>[ 4185.860879] B3 20967 wifi_platform_set_power = 1
<4>[ 4185.860936] B3 20967 WiFi: trying to acquire BT lock
<4>[ 4185.861000] B3 20967 ####btlock acquired cookie: WiFi
<4>[ 4185.861052] B3 20967 wifi_platform_set_power: btlock acquired
<4>[ 4185.861115] B3 20967 check BCM4335, check_bcm4335_rev
<4>[ 4185.861216] B3 20967 /data/.rev file Found
<4>[ 4185.861278] B3 20967 Found BCM4335B0
<6>[ 4185.861332] B3 20967 ------------------------------------------------
<6>[ 4185.861401] B3 20967 ------------------------------------------------
<6>[ 4185.861477] B3 20967 brcm_wlan_power Enter: power on
<6>[ 4185.861547] B3 20967 gpio_table = [2]
<7>[ 4185.861807] B3 20967 WLAN: GPIO_WLAN_EN = 1
<6>[ 4185.865246] B0 19092 thermal_sys: [TMU] ACTIVE: Under active trip temp=74000
<4>[ 4186.065509] B3 20967 sdio_reset_comm():
<6>[ 4186.065729] B3 20967 mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
<4>[ 4186.082532] B1 20967 mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[ 4186.085506] B1 20967 mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 4186.087186] B1 20967 mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<6>[ 4186.148555] B2 20967 mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
<4>[ 4186.159110] B0 20967 F1 signature OK, socitype:0x1 chip:0x4335 rev:0x1 pkg:0x0
<4>[ 4186.160945] B0 20967 DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[ 4186.161651] B0 20967 CHIP VER = [0x1]
<4>[ 4186.161748] B0 20967 ----- CHIP bcm4335_B0 -----
<4>[ 4186.161822] B0 20967 dhdsdio_download_firmware: firmware path=/system/etc/wifi/bcmdhd_sta.bin, nvram path=/system/etc/wifi/nvram_net.txt_muratafem1
<6>[ 4186.165547] B0 19092 thermal_sys: [TMU] ACTIVE: Under active trip temp=75000
<4>[ 4186.279855] B0 20967 dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<6>[ 4186.300195] B0 19092 PVR_K: SGX change voltage [900000] -> [900000] mV
<6>[ 4186.300797] B0 19092 PVR_K: SGX change clock [177] Mhz -> [266] MHz req [266] MHz / M[800] / B[4]
<6>[ 4186.300845] B0 19092 PVR_K: SGX CCB RO : 198, WO : 198, Total : 57
<4>[ 4186.417583] B0 20967 dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<6>[ 4186.417991] B0 20967 wake enabled for irq 528
<4>[ 4186.419857] B0 20967 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 4186.419929] B0 20967 [WIFI_SEC] dhd_check_module_cid: CIS reading failed, ret=-23
<4>[ 4186.431315] B1 20967 Firmware up: op_mode=0x0015, MAC=5c:b6:fa
<4>[ 4186.439558] B1 20967 dhdcdc_set_ioctl: SET PM to 2
<4>[ 4186.439977] B0 20967 [WIFI_SEC] sec_control_pm: /data/.psm.info open failed, so set PM to 2
<4>[ 4186.444586] B1 20967 dhd_wl_ioctl: WLC_SET_VAR: aibss_bcn_force_config, ret = -23
<4>[ 4186.444659] B1 20967 dhd_preinit_ioctls Set aibss_bcn_force_config to 500, 5000, 5000 failed -23
<4>[ 4186.459459] B2 20967 Firmware version = wl0: Mar 5 2015 16:46:55 version 6.30.171.24.64 (B0 Station/P2P)
<4>[ 4186.461309] B1 20967 [WIFI_SEC] .wifiver.info already saved.
<4>[ 4186.462336] B0 20967 dhd_wl_ioctl: WLC_SET_VAR: ampdu_hostreorder, ret = -23
<4>[ 4186.462389] B0 20967 dhd_preinit_ioctls wl ampdu_hostreorder failed -23
<4>[ 4186.462947] B1 20967 dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -23
<4>[ 4186.464294] B1 20967 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 4186.464352] B1 20967 [WIFI_SEC] dhd_check_module_mac: Check module mac by legacy FW : 5c:b6:fa
<6>[ 4186.465189] B0 19092 thermal_sys: [TMU] ACTIVE: Under active trip temp=75000
<4>[ 4186.466632] B1 20967 [WIFI_SEC] Check Mac address in .mac.info
<4>[ 4186.467042] B1 20967 ####btlock released, cookie: WiFi
<4>[ 4186.467078] B1 20967 wl_android_wifi_on() bcm_bt_unlock
<6>[ 4186.474275] B1 20967 CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=5e:b6:fa
<6>[ 4186.600537] B0 19092 PVR_K: SGX change clock [266] Mhz -> [177] MHz req [177] MHz / M[800] / B[4]
<6>[ 4186.600591] B0 19092 PVR_K: SGX change voltage [900000] -> [900000] mV
<6>[ 4186.600763] B0 19092 PVR_K: SGX CCB RO : 234, WO : 234, Total : 36
<6>[ 4186.765211] B0 19092 thermal_sys: [TMU] ACTIVE: Under active trip temp=75000
<6>[ 4186.826768] B0 20967 CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<4>[ 4186.835341] B1 20967 dhd_set_suspend: Remove extra suspend setting
<3>[ 4186.879238] B0 20967 WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for RU as RU rev 13

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LRX22G
ro.build.display.id=Aurora.Full-S6.Port.No.7.0
ro.build.version.incremental=G9250ZCU1AOF8
ro.build.version.sdk=21
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.2
ro.build.date=Wed Jul 1 20:32:11 KST 2015
ro.build.date.utc=1435750331
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6406
ro.build.tags=release-keys
ro.product.model=SM-G9250
ro.product.brand=samsung
ro.product.name=zeroltexx
ro.product.device=zerolte
ro.product.board=universal5410
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos5
# ro.build.product is obsolete; use ro.product.device
ro.build.product=zerolte
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=zeroltexx-user 5.0.2 LRX22G G9250ZCU1AOF8 release-keys
ro.build.fingerprint=samsung/zeroltexx/zerolte:5.0.2/LRX22G/G9250ZCU1AOF8:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=G9250ZCU1AOF8
ro.build.hidden_ver=G9250ZCU1AOF8
ro.config.rm_preload_enabled=0
ro.build.changelist=5298107
ro.product_ship=true
ro.chipname=exynos5410
persist.sys.storage_preload=1
# end build properties
#
# from device/samsung/zerolte/system.prop
#
#
# system.prop for universal_5410
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=480
# Multimedia property for Smart View
media.enable-commonsource=true
# System property for storage_preload
persist.sys.storage_preload=1
ro.arch=exynos5410
ro.config.dha_ils_enable=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.notification_sound=Skyline.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.opengles.version=131072
ro.hwui.texture_cache_size=50
ro.hwui.layer_cache_size=34
ro.hwui.path_cache_size=10
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_small_cache_width=2048
ro.hwui.text_small_cache_height=2048
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=4096
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.sec.fle.encryption=true
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.error.receiver.default=com.samsung.receiver.error
ro.hdcp2.rx=tz
ro.secwvk=220
ro.securestorage.support=false
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=single
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
persist.sys.dalvik.vm.lib.2=libart.so
ro.build.selinux=1
dalvik.vm.isa.arm.features=div
ro.config.knox=0
ro.config.tima=0
ro.kernel.qemu=0
net.bt.name=Galaxy S6 Edge
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.build.version.sdl=2101
# Debug
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
ro.config.combined_signal=true
#Misc
wlan.wfd.hdcp=disable
ro.SecEDS.enable=false
persist.security.ams.enforcing=0
#battery
pm.sleep_mode=1
#Force launcher into memory
ro.HOME_APP_ADJ=1
debug.sf.hw=0
debug.egl.hw=0
dalvik.vm.dexopt-flags=m=y
# Scrolling speed tweak enabled
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
# MultiTasking Tweaks
ro.config.dha_empty_max=36
ro.config.dha_cached_max=12
ro.config.dha_th_rate=2.3
ro.config.dha_lmk_scale=0.545
ro.config.sdha_apps_bg_max=70
ro.config.sdha_apps_bg_min=8
ro.config.oomminfree_high=7628,9768,11909,14515,16655,20469

RAM: 2048 MB (2045 MB available)

exynos5-fb.1: 7.910MB
: 1.625MB
System RAM: 2045.000MB

Flash: 16 GB Build-in (14.676 GB actual); 1.000 GB

mmcblk0: 14.676 GB
vnswap0: 1.000 GB

Touch Screen for samsung SM-G9250

$342.2 LCD Display Touch Screen Digitizer Assembly Replacement,Fit for Samsung Galaxy S6 Edge,SM-G9250,SM-G925A,SM-G925F, G925FQ, G925I

Replacement Battery for samsung SM-G9250

Cover Cases for samsung SM-G9250

$26.15 Battery back cover case glass replacement for Samsung Galaxy S6 s6edge s6edge s6edgeplus SM-G9200 g9250 g9280 door housing case

$40.4 Battery Back Cover Case Glass Replacement For Samsung Galaxy S6 S6edge S6edge+ S6edgePlus SM-G9200 G9250 G9280 Door Housing Case

$25 Battery back cover case glass replacement for Samsung Galaxy S6 s6edge s6edge s6edgeplus SM-G9200 g9250 g9280 housing case

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

Link: Here I buy Chinese smartphones and tablets