- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | Teta |
Versión de Android | 4.0.4; eng.chivin.1371118815; SDK10 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l) |
Pantalla | 480 x 320; DPI: 160; Evaluated Size: 3,6" |
Pantalla táctil | Multitouch 2 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.7@276259 |
RAM | 256 MB (243 MB available) |
Flash | 0.5 GB (0.466 GB actual); 0.5 GB (0.454 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM, Dual SIM; Net: GPRS |
WiFi | lca_core; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 3.1 MP; Max: 2048x1536; Focus: infinity; Flash modes: on off torch |
Cámara trasera | Photo: 1.2 MP; Max size: 1280x960; Focus: infinity; No flash |
Sensores | ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
CM3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
Gravity Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 41; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 4014 |
FM radio | Supported by chipset |
SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (chivin@chivin-desktop) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Jun 13 18:20:03 CST 2013
CODENAME: REL
Mainboard: htt15_lca_6628_gb2
BRAND: KENEKSI
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: htt15_lca_6628_gb2
DISPLAY: KENEKSI_Teta_01
FINGERPRINT: HTT:4.0.4/GRK39F/1371118815:user/test-keys
HARDWARE: mt6575
ID: GRK39F
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1998.84
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_stream2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 309.715578] [1054:dmesg] exit
<7>[ 309.715755] [1054:dmesg] sig 17 to [1039:AsyncTask #2]
<7>[ 309.774331] [1033:Smack Packet Re] sig 13 to [1033:Smack Packet Re]
<7>[ 309.775805] [1033:Smack Packet Re] exit
<7>[ 309.779947] [1053:close-XMPP-conn] exit
<6>[ 310.042189] [RTlog delete] fib_netdev_event() wlan0 NETDEV_DOWN!
<6>[ 310.044016] [WLAN] rfkill_set_block(blocked 1)
<6>[ 310.044026] [WLAN] Power off
<3>[ 310.044040] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) start
<4>[ 310.044061] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<6>[ 310.044098] src = COMBO_IF_UART, to enter deep idle? 0
<4>[ 310.059764] [STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1
<6>[ 310.059848] [WMT-DFT][I]hif_sdio_wifi_off:start!
<3>[ 310.060155] [wlan] OID Timeout! Releasing pending OIDs ..
<7>[ 310.060176] [962:tx_thread] exit
<7>[ 310.082334] [234:NativeDaemonCon] fork [1055:NativeDaemonCon]
<7>[ 310.082382] [1055:NativeDaemonCon] set proc[1055] name: -> [Thread-106]
<7>[ 310.083240] [1055:Thread-106] exit
<6>[ 310.339766] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<7>[ 310.339797] [961:ksdioirqd/mmc1] exit
<6>[ 310.339903] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<4>[ 310.339919] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 310.339927] mtk_wcn_cmb_sdio_off (3)
<3>[ 310.339938] msdc3 -> USR Suspend <- msdc_pm() : L<1206> PID
<6>[ 310.339981] [WMT-DFT][I]hif_sdio_remove:start!
<6>[ 310.340029] [WMT-DFT][I]hif_sdio_remove:sdio func(0xcda72080) is removed successfully!
<6>[ 310.340110] mmc1: card 0001 removed
<3>[ 310.359777] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2981> PID
<3>[ 310.359793] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<644> PID
<3>[ 310.359920] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 310.359941] [STP-PSM] [I]_stp_psm_is_redundant_active_op: redundant opId found, opId(1), preOpid(1)
<6>[ 310.359963] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 310.359975] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 310.359987] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 310.359996] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 310.360009] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 310.360020] Flush type = 4 Rx Queue
<3>[ 310.379870] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 310.379888] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 310.379900] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 310.379915] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 310.379925] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 310.379936] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 310.379947] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 310.379960] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 310.379974] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 310.379987] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 310.379997] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 310.380011] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 310.380045] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 310.380063] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 310.398932] [205:er.ServerThread] fork [1056:er.ServerThread]
<6>[ 310.400331] [WLAN] rfkill_set_block(blocked 0)
<6>[ 310.400342] [WLAN] Power on
<3>[ 310.400356] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 310.400373] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 310.403421] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 310.403436] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO183)
<3>[ 310.403446] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 310.403454] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 310.403464] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 310.403472] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 310.403482] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 310.403491] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO75)
<3>[ 310.403500] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(6)
<3>[ 310.403509] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 310.403518] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 310.403527] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 310.403536] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 310.403545] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 310.403554] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 310.403563] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 310.403574] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[ 310.403583] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO186)
<3>[ 310.403592] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 310.403604] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 310.403615] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 310.403632] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<0>[ 310.441833] mt_usb_disconnect 256: [MUSB] USB is ready for disconnect
<7>[ 310.443337] [1056:er.ServerThread] set proc[1056] name: -> [Thread-107]
<7>[ 310.445469] [966:WifiWatchdogThr] exit
<7>[ 310.447207] [1056:Thread-107] exit
<7>[ 310.459854] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 310.460185] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[ 310.481512] [5:khelper] fork [1057:khelper]
<7>[ 310.482154] [1057:khelper] fork [1058:khelper]
<7>[ 310.482229] [1058:khelper] exit
<7>[ 310.482279] [1058:khelper] sig 17 to [1057:khelper]
<7>[ 310.482321] [1057:khelper] exit
<7>[ 310.482542] [5:khelper] fork [1059:khelper]
<7>[ 310.488536] [1059:khelper] fork [1060:khelper]
<7>[ 310.500835] [1060:khelper] exit
<7>[ 310.500862] [1060:khelper] sig 17 to [1059:khelper]
<7>[ 310.500902] [1059:khelper] exit
<7>[ 310.501049] [5:khelper] fork [1061:khelper]
<7>[ 310.504717] [1061:khelper] fork [1062:khelper]
<7>[ 310.510252] [1062:khelper] exit
<7>[ 310.510306] [1062:khelper] sig 17 to [1061:khelper]
<7>[ 310.510353] [1061:khelper] exit
<7>[ 310.510535] [5:khelper] fork [1063:khelper]
<7>[ 310.529842] [1063:khelper] fork [1064:khelper]
<7>[ 310.539802] [1064:khelper] exit
<7>[ 310.539830] [1064:khelper] sig 17 to [1063:khelper]
<7>[ 310.539877] [1063:khelper] exit
<7>[ 310.540104] [965:wpa_supplicant] exit
<7>[ 310.540542] [965:wpa_supplicant] sig 17 to [1:init]
<3>[ 310.540722] init: untracked pid 965 exited
<3>[ 310.609789] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 310.609808] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 310.609822] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 310.610003] [STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[ 310.610009]
<3>[ 310.610030] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 310.610042] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 310.610053] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 310.610194] mt6575_get_bus_freq() return 192400
<3>[ 310.610335] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 310.610345] Flush type = 4 Rx Queue
<3>[ 310.610466] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 310.610481] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 310.610493] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 310.610502] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 310.610513] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 310.610526] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 310.610537] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 310.610548] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 310.610559] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 310.616237] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 310.621927] [WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[ 310.627603] [WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[ 310.627618] [WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[ 310.627632] [WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[ 310.627647] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 310.638801] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 310.638816] [WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 310.646611] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 310.646629] [WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 310.647603] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 310.647617] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120807180600a
<3>[ 310.647628] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 310.647638] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 310.647648] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 310.647658] [WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1150
<3>[ 310.647667] [WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 310.779555] [WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 176) ok
<3>[ 310.780292] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf086b54)
<3>[ 310.781291] [WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 310.782050] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 310.782063] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 310.782076] [STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 310.782086] [WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<7>[ 310.785176] [1032:Smack Packet Wr] exit
<3>[ 310.802916] [WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<6>[ 310.802930] [STP] mtk_wcn_stp_coredump_flag_ctrl:[I] enable coredump function.
<3>[ 310.805103] [WMT-IC][I]mt6628_sw_init:enable mt662x firmware coredump
<6>[ 310.805116] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 310.805129] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 310.805141] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 310.805149] board_sdio_ctrl force off before on
<6>[ 310.805156] mtk_wcn_cmb_sdio_off (3)
<6>[ 310.805233] mtk_wcn_cmb_sdio_on (3)
<3>[ 310.805297] msdc3 -> USR Resume <- msdc_pm() : L<1231> PID
<3>[ 310.805961] msdc3 -> sdio ops_get_cd<1> <- msdc_ops_get_cd() : L<3028> PID
<3>[ 310.839983] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[ 310.840000] msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<694> PID
<3>[ 310.840015] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<3>[ 310.860312] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x00000c00> <- msdc_irq() : L<3213>
<3>[ 310.860899] msdc3 -> XXX CMD<52> MSDC_INT_CMDTMO Arg<0x80000c08> <- msdc_irq() : L<3213>
<3>[ 310.865201] msdc3 -> XXX CMD<8> MSDC_INT_CMDTMO Arg<0x000001aa> <- msdc_irq() : L<3213>
<3>[ 310.866547] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1291> PID
<3>[ 310.886550] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<2973> PID
<3>[ 310.886586] msdc3 -> ================ <- msdc_set_mclk() : L<692> PID
<3>[ 310.886601] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<694> PID
<3>[ 310.886616] msdc3 -> ================ <- msdc_set_mclk() : L<695> PID
<6>[ 310.887330] mmc1: new high speed SDIO card at address 0001
<6>[ 310.888493] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 310.888506] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 310.888516] [WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 310.888525] [WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 310.888533] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 310.888541] [WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 310.888624] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<6>[ 310.959737] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 310.962709] [2:kthreadd] fork [1065:kthreadd]
<6>[ 310.962741] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<7>[ 311.903804] [SYSRAM][EanbleSwitchBank]MFG to SYSRAM, SWITCH_BANK = 0x00000000, u4AllocatedTbl = 0x00000000
<7>[ 311.904060] [SYSRAM][EanbleSwitchBank]SYSRAM to MFG, SWITCH_BANK = 0x00000007, u4AllocatedTbl = 0x00000000
<7>[ 311.924335] [2:kthreadd] fork [1066:kthreadd]
<6>[ 311.991722] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 311.991738] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 311.991757] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 311.992335] [STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 311.992368] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 311.992887] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<6>[ 311.993427] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 311.993447] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 311.995270] [1:init] fork [1067:init]
<7>[ 311.997140] [238:WifiService] fork [1068:WifiService]
<7>[ 311.997724] [1067:init] set proc[1067] name: -> [logwrapper]
<7>[ 311.999274] [1067:logwrapper] fork [1069:logwrapper]
<7>[ 311.999492] [1068:WifiService] set proc[1068] name: -> [WifiMonitor]
<7>[ 312.007018] [1069:logwrapper] set proc[1069] name: -> [wpa_supplicant]
<7>[ 312.027386] [238:WifiService] fork [1070:WifiService]
<7>[ 312.028621] [205:er.ServerThread] fork [1071:er.ServerThread]
<7>[ 312.053178] [1071:er.ServerThread] set proc[1071] name: -> [Thread-110]
<7>[ 312.054041] [1071:Thread-110] exit
<7>[ 312.054105] [1070:WifiService] set proc[1070] name: -> [WifiWatchdogThr]
<7>[ 312.210309] [5:khelper] fork [1072:khelper]
<7>[ 312.210356] [1072:khelper] fork [1073:khelper]
<7>[ 312.210401] [1073:khelper] exit
<7>[ 312.210424] [1073:khelper] sig 17 to [1072:khelper]
<7>[ 312.210459] [1072:khelper] exit
<7>[ 312.239424] [1039:AsyncTask #2] fork [1074:AsyncTask #2]
<7>[ 312.244073] [1074:AsyncTask #2] set proc[1074] name: -> [dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRK39F
ro.build.display.id=KENEKSI_Teta_01
ro.build.version.incremental=eng.chivin.1371118815
ro.custom.build.version=1371118815
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Jun 13 18:24:33 CST 2013
ro.build.date.utc=1371119073
ro.build.type=user
ro.build.user=chivin
ro.build.host=chivin-desktop
ro.build.tags=test-keys
ro.product.model=Teta
ro.product.brand=KENEKSI
ro.product.name=htt15_lca_6628_gb2
ro.product.device=htt15_lca_6628_gb2
ro.product.chivinproduct=Teta
ro.product.chivinversion=0502D080_20130614
ro.product.customversion=0502D080_20130614
ro.product.board=htt15_lca_6628_gb2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=ru
ro.product.locale.region=RU
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=htt15_lca_6628_gb2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=htt15_lca_6628_gb2-user 4.0.4 GRK39F eng.chivin.1371118815 test-keys
ro.build.fingerprint=HTT:4.0.4/GRK39F/1371118815:user/test-keys
ro.build.flavor=
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=KENEKSI_Teta_01
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.GB2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#HTT liujihui {
ro.setupwizard.mode=DISABLED
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
persist.sys.timezone=Asia/Shanghai
#persist.sys.timezone=Europe/London
#HTT liujihui }
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
curlockscreen=1
ro.mediatek.gemini_support=true
ro.mediatek.drm_support=true
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=CaribbeanIce.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
lca_core 2718 0 - Live 0xbf000000 (P)
pvrsrvkm 163658 36 mtkbc,mtklfb, Live 0xbf006000
mtklfb 14525 0 - Live 0xbf03c000
mtkbc 6303 0 - Live 0xbf046000
mtk_drvb 4403 0 - Live 0xbf04d000 (P)
mtk_hif_sdio 17706 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf054000
mtk_stp_wmt 363926 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf05f000 (P)
mtk_stp_uart 21521 1 - Live 0xbf0c8000 (P)
mtk_stp_gps 37166 0 - Live 0xbf0d3000
mtk_stp_bt 39754 0 - Live 0xbf0e2000
mtk_fm_drv 98106 1 mtk_fm_priv, Live 0xbf0f1000
mtk_fm_priv 2427 0 - Live 0xbf112000 (P)
wlan_mt6628 279998 0 - Live 0xbf118000 (P)
ccci_plat 101892 3 sec,ccmni,ccci, Live 0xbf175000 (P)
ccci 138050 15 ccmni, Live 0xbf197000 (P)
ccmni 16350 0 - Live 0xbf1c6000 (P)
mt6575_m4u 84190 2 - Live 0xbf1d0000 (P)
devinfo 756 0 - Live 0xbf1ed000 (P)
mt6575_vcodec_kernel_driver 23905 0 - Live 0xbf1f3000 (P)
sec 84741 0 - Live 0xbf200000 (P)
aed 18230 3 - Live 0xbf21c000 (P)
RAM: 256 MB (243 MB available)
System RAM: 243.000MB
mtkfb.0: 3.000MB
Flash: 0.5 GB (0.466 GB actual); 0.5 GB (0.454 GB actual)
mmcblk0: 0.466 GB
mtdblock: 0.025 GB
mtdblock1: 0.454 GB
Pantalla táctil para alps Teta
$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Batería de repuesto para alps Teta
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Fundas para alps Teta
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |