1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
Similar device in database: Alps Copy of Samsung Galaxy Note
General Specifications | |
---|---|
Manufacturer | alps |
Model | I9220 |
Firmware | 4.0.4; eng.flyword.1351664727; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Display | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Touch screen | NOT multitouch 1 point |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
RAM | 512 MB (496 MB available) |
Flash | 1 GB (0.925 GB actual); 0.5 GB (0.472 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 3.1 MP; Max: 2048x1536; Focus: infinity; Flash modes: auto on off torch |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensors | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Technology: Li-ion; Voltage: 3855 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (flyword@RD17) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Wed Oct 31 14:25:18 HKT 2012
CODENAME: REL
Mainboard: l207_ics
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: l207_ics
DISPLAY: ALPS.ICS.MP.V2.2
FINGERPRINT: alps/l207_ics/l207_ics:4.0.4/IMM76D/1351664727:user/test-keys
HARDWARE: mt6575
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 1179.697566] [2159:dmesg] exit
<7>[ 1179.697709] [2159:dmesg] sig 17 to [2152:AsyncTask #2]
<7>[ 1179.734049] [249:er.ServerThread] fork err at pid
<7>[ 1179.734073] [249:er.ServerThread] fork [2160:er.ServerThread]
<7>[ 1179.735517] [2160:er.ServerThread] set proc[2160] name: ->[Thread-199]
<7>[ 1179.736881] [2160:Thread-199] exit
<4>[ 1179.745591] [STP-PSM] [I]_stp_psm_do_wait: STP is waiting state for ACT, i=1
<4>[ 1179.746464] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 200 msec
<4>[ 1179.747379] [STP-PSM] [I]_stp_psm_disable: PSM MODE Disable<============================
<4>[ 1179.747386]
<6>[ 1179.748575] [WMT-DFT][I]hif_sdio_wifi_off:start!
<7>[ 1179.748601] [360:ksdioirqd/mmc1] exit
<6>[ 1179.751673] [WMT-DFT][I]hif_sdio_wifi_off:sdio_release_irq() for wifi ok
<5>[ 1179.751692] [wlan] Remove wlan!
<5>[ 1179.752134] [wlan]
<1>[ 1179.752359] tx_thread should stop now...
<5>[ 1179.752874] [wlan] mtk_sdiod stops
<7>[ 1179.753298] [460:tx_thread] exit
<5>[ 1179.753437] [wlan] mtk_sdiod stopped
<6>[ 1179.785741] [wlan] QM: Enter qmFlushRxQueues()
<6>[ 1179.786230] [wlan] QM: Enter qmFlushTxQueues()
<5>[ 1179.786327] [wlan] Number of Stalled Packets = 0
<5>[ 1179.786895] [wlan] unregistering netdev (0xdd9e0000)
<6>[ 1179.789599] [RTlog delete] fib_netdev_event() wlan0 NETDEV_DOWN!
<7>[ 1179.792086] [279:CallbackHandler] fork err at pid
<7>[ 1179.792112] [279:CallbackHandler] fork [2161:CallbackHandler]
<7>[ 1179.792298] [2161:CallbackHandler] set proc[2161] name: ->[Thread-200]
<7>[ 1179.793267] [2161:Thread-200] exit
<5>[ 1179.805609] [wlan] unregistration completed
<6>[ 1179.806182] [WMT-DFT][I]hif_sdio_wifi_off:ok!
<4>[ 1179.806195] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 1179.806867] mtk_wcn_cmb_sdio_off (3)
<3>[ 1179.806878] msdc3 -> USR Suspend <- msdc_pm() : L<1412> PID
<6>[ 1179.807770] [WMT-DFT][I]hif_sdio_remove:start!
<6>[ 1179.807836] [WMT-DFT][I]hif_sdio_remove:sdio func(0xdd23ebc0) is removed successfully!
<6>[ 1179.808404] mmc1: card 0001 removed
<3>[ 1179.809907] msdc3 -> save latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3439> PID
<3>[ 1179.811020] msdc3 -> set mclk to 0 <- msdc_set_mclk() : L<708> PID
<3>[ 1179.812465] [WMT-CORE][I]opfunc_func_off:WMT-CORE:Fun(3) [POWER_OFF] and power down chip
<4>[ 1179.813470] [STP-PSM] [I]_stp_psm_disable: PSM MODE Disable=============================>
<4>[ 1179.813477]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 1179.815263] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 1179.816053] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 1179.820234] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 1179.821339] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 1179.821346]
<4>[ 1179.822439] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 1179.823335] [STP-PSM] [I]_stp_psm_disable: PSM MODE Disable<============================
<4>[ 1179.823342]
<7>[ 1179.824921] [1342:Smack Packet Re] sig 13 to [1342:Smack Packet Re]
<6>[ 1179.825730] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 1179.825743] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 1179.825755] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 1179.826396] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(1)
<4>[ 1179.827093] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 1179.827783] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<4>[ 1179.828586] Flush type = 4 Rx Queue
<7>[ 1179.834471] [1342:Smack Packet Re] exit
<3>[ 1179.845748] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[ 1179.846506] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[ 1179.847356] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[ 1179.848453] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[ 1179.849546] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<5>[ 1179.854899] [Power/Alarm] alarm 2 set 4982.015000000
<3>[ 1179.855866] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 1179.856647] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 1179.857422] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[ 1179.858889] [WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[ 1179.859518] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[ 1179.860855] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 1179.860874] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[ 1179.870073] [2157:unloadDriverThr] exit
<7>[ 1179.884479] [284:WifiStateMachin] fork err at pid
<7>[ 1179.884505] [284:WifiStateMachin] fork [2162:WifiStateMachin]
<7>[ 1179.910323] [2162:WifiStateMachin] set proc[2162] name: ->[loadDriverThrea]
<6>[ 1179.932432] [WLAN] rfkill_set_block(blocked 0)
<6>[ 1179.932443] [WLAN] Power on
<3>[ 1179.932456] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 1179.933234] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 1179.933270] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 1179.934335] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 1179.935083] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[ 1179.935830] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(GPIO149)
<3>[ 1179.936558] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 1179.937251] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 1179.937999] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 1179.938745] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 1179.939504] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 1179.940262] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 1179.940999] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 1179.941735] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 1179.942460] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 1179.943186] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 1179.943901] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 1179.944638] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[ 1179.945363] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[ 1179.965230] [WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[ 1179.966009] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[ 1179.966748] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO185)
<3>[ 1179.967495] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 1179.968557] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 1179.969390] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 1179.970177] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 1180.175825] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 1180.176646] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 1180.177657] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[ 1180.178742] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[ 1180.178774]
<3>[ 1180.179852] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 1180.181015] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 1180.182435] mt6575_get_bus_freq() return 192400
<3>[ 1180.183429] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 1180.184215] Flush type = 4 Rx Queue
<3>[ 1180.185171] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 1180.186133] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 1180.186195] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 1180.186875] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 1180.187601] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 1180.188328] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[ 1180.200909] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 1180.200975] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 1180.201037] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 1180.206727] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[ 1180.213191] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[ 1180.219755] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[ 1180.220751] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[ 1180.221848] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[ 1180.223103] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[ 1180.245008] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 1180.245982] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 1180.248823] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[ 1180.258757] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 1180.259767] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120419185021
<3>[ 1180.260752] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 1180.261589] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 1180.272203] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[ 1180.273056] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[ 1180.273892] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 1180.317967] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[ 1180.348611] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<3>[ 1180.626194] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 928) ok
<3>[ 1180.627161] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[ 1180.628362] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12e2b0)
<3>[ 1180.632992] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[ 1180.634066] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 1180.634089] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 1180.634111] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[ 1180.647808] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[ 1180.648477] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 1180.648499] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 1180.648518] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 1180.649514] board_sdio_ctrl force off before on
<6>[ 1180.649532] mtk_wcn_cmb_sdio_off (3)
<6>[ 1180.649582] mtk_wcn_cmb_sdio_on (3)
<3>[ 1180.649627] msdc3 -> USR Resume <- msdc_pm() : L<1437> PID
<3>[ 1180.665746] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[ 1180.666770] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[ 1180.668405] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<3>[ 1180.691253] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1497> PID
<3>[ 1180.718538] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3422> PID
<3>[ 1180.719700] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[ 1180.720718] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[ 1180.722375] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<6>[ 1180.724515] mmc1: new high speed SDIO card at address 0001
<6>[ 1180.726831] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 1180.726854] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 1180.726873] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 1180.726892] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 1180.726907] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 1180.727048] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 1180.727088] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 75387539 > 8ms
<7>[ 1180.727116] work: mmc_rescan+0x0/0x370
<6>[ 1180.805603] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 1180.805758] [2:kthreadd] fork err at pid
<7>[ 1180.805790] [2:kthreadd] fork [2163:kthreadd]
<6>[ 1180.805829] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 1180.805874] [wlan] net_device prDev(0xdd9e0000) allocated
<4>[ 1180.806894] [RT_MONITOR]WARNNING [2163:ksdioirqd/mmc1] SET NOT ALLOW RT Prio [1] for proc [2163:ksdioirqd/mmc1]
<5>[ 1180.809744] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[ 1180.815390] Backtrace:
<4>[ 1180.815929] [
<4>[ 1180.817122] r7:00000001 r6:00000000 r5:d3204000 r4:d5dee800
<4>[ 1180.818012] [
<4>[ 1180.819691] [
<4>[ 1180.821011] [
<4>[ 1180.822285] [
<4>[ 1180.823415] [
<4>[ 1180.824452] r7:00000013 r6:c00895c0 r5:c00a0c40 r4:dddebd78
<5>[ 1180.848464] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 1180.849482] [wlan] Virtual Address = df5fe000 for COMMON MGMT MEMORY POOL.
<5>[ 1180.850333] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 1180.851038] [wlan] Virtual Address = dff2f000 for SW_RFB_T.
<5>[ 1180.851723] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 1180.852766] [wlan] Virtual Address = dff33000 for MSDU_INFO_T.
<6>[ 1180.853487] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[ 1180.865642] [wlan] Chip ID: 0x6620
<6>[ 1180.865661] [wlan] Revision ID: 0x1
<7>[ 1181.337810] [1341:Smack Packet Wr] exit
<6>[ 1181.522519] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[ 1181.543285] [2145:com.specdevice] exit
<6>[ 1181.755884] [wlan] Ready bit asserted
<5>[ 1181.795792] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 1181.796428] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 1181.796584] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 1181.796881] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 1181.812247] [2:kthreadd] fork err at pid
<7>[ 1181.812340] [2:kthreadd] fork [2164:kthreadd]
<5>[ 1181.814050] [wlan] tx_thread starts running...
<5>[ 1181.816764] [Power/Battery] [use_chip_trim_value] 4 -> 4
<6>[ 1181.823416] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 1181.823487] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 1181.823569] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 1181.824996] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[ 1181.825036]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 1181.839713] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 1181.840540] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 1181.841386] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 1181.842901] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 1181.842936]
<4>[ 1181.848077] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 1181.856435] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[ 1181.856446]
<3>[ 1181.858162] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[ 1181.860656] [2162:loadDriverThrea] exit
<7>[ 1181.877652] [1911:kworker/u:3] fork err at pid
<7>[ 1181.877676] [1911:kworker/u:3] fork [2165:kworker/u:3]
<5>[ 1181.878793] [Power/Battery] [use_chip_trim_value] 1 -> 1
<5>[ 1181.881466] [Power/Battery] [use_chip_trim_value] 0 -> 0
<7>[ 1181.882382] [2165:kworker/u:3] fork err at pid
<7>[ 1181.882437] [2165:kworker/u:3] fork [2166:kworker/u:3]
<7>[ 1181.882522] [2166:kworker/u:3] exit
<7>[ 1181.882580] [2166:kworker/u:3] sig 17 to [2165:kworker/u:3]
<7>[ 1181.882627] [2165:kworker/u:3] exit
<6>[ 1181.883659] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 1181.883685] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[ 1181.891435] [Power/Battery] [FGADC] 1,1,0,0,3880,60,51,51,1984,1984,0,0,0,1000,0,3801,1000,49,49,1,100,103
<0>[ 1181.892809] [MUSB]mt_usb_disconnect 299: [MUSB] USB is ready for disconnect
<7>[ 1181.906109] [1:init] fork err at pid
<7>[ 1181.906134] [1:init] fork [2167:init]
<7>[ 1181.906931] [284:WifiStateMachin] fork err at pid
<7>[ 1181.906956] [284:WifiStateMachin] fork [2168:WifiStateMachin]
<7>[ 1181.907319] WQ_WARN: cpu:0, proc:kworker/0:3, dur: 23515923 > 8ms
<7>[ 1181.907391] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[ 1181.907462] [2168:WifiStateMachin] set proc[2168] name: ->[WifiMonitor]
<7>[ 1181.913462] [2167:init] set proc[2167] name: ->[logwrapper]
<7>[ 1181.919428] [2167:logwrapper] fork err at pid
<7>[ 1181.919481] [2167:logwrapper] fork [2169:logwrapper]
<7>[ 1181.920993] [2169:logwrapper] set proc[2169] name: ->[wpa_supplicant]
<5>[ 1181.952849] [Power/Battery] [BATTERY:AVG] BatTemp:26 Vbat:3854 VBatSen:3820 SOC:62 ChrDet:0 Vchrin:44 Icharging:0 ChrType:1 USBstate:1 gADC_I_SENSE_offset:0
<5>[ 1182.035786] [wlan] N=0 closed
<5>[ 1182.036212] [wlan] EVENT-ROAMING ABORT: Current Time = 875410
<5>[ 1182.036930] [wlan] [13] TRANSITION: [0] -> [0]
<6>[ 1182.039657] [wlan] NAF=0,0,0
<6>[ 1182.039671] [wlan] NAF=0,0,0
<7>[ 1182.182293] [2113:IntentService[D] exit
<5>[ 1182.196827] [wlan] [13] TRANSITION: [0] -> [2]
<7>[ 1182.349032] [2152:AsyncTask #2] fork err at pid
<7>[ 1182.349078] [2152:AsyncTask #2] fork [2170:AsyncTask #2]
<7>[ 1182.363628] [2170:AsyncTask #2] set proc[2170] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS.MP.V2.2
ro.build.version.incremental=eng.flyword.1351664727
ro.custom.build.version=L207.MTK6515.2012_10_31
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Wed Oct 31 14:26:28 HKT 2012
ro.build.date.utc=1351664788
ro.build.type=user
ro.build.user=flyword
ro.build.host=RD17
ro.build.tags=test-keys
ro.product.model=I9220
ro.product.brand=alps
ro.product.name=l207_ics
ro.product.device=l207_ics
ro.product.board=l207_ics
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=l207_ics
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=l207_ics-user 4.0.4 IMM76D eng.flyword.1351664727 test-keys
ro.build.fingerprint=alps/l207_ics/l207_ics:4.0.4/IMM76D/1351664727:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V2.2
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
# flyword add for customer
sys.ipod_3rd_dur = 6
ro.operator.defaultwallpaper=DEFAULTWALLPAPER1
persist.boot.status=1
persist.operator.optr=
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 285348 0 - Live 0xbf1e5000 (P)
cfg80211 122425 0 - Live 0xbf1bc000
mtk_fm_priv 8909 0 - Live 0xbf1b6000 (P)
mt6620_fm_drv 111405 1 mtk_fm_priv, Live 0xbf18e000
mtk_stp_bt 39718 0 - Live 0xbf181000
mtk_stp_gps 37190 0 - Live 0xbf174000
mtk_stp_uart 21669 1 - Live 0xbf16b000 (P)
mtk_stp_wmt 344510 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf109000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf100000
devinfo 748 0 - Live 0xbf0fc000 (P)
sec 109563 0 - Live 0xbf0db000 (P)
mt6575_vcodec_kernel_driver 23817 0 - Live 0xbf0d0000 (P)
mt6575_m4u 108464 8 - Live 0xbf0ac000 (P)
ccmni 17214 0 - Live 0xbf0a3000 (P)
ccci 140352 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125068 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163655 111 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)
RAM: 512 MB (496 MB available)
System RAM: 496.000MB
mtkfb.0: 6.000MB
Flash: 1 GB (0.925 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 0.925 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Touch Screen for alps I9220
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Replacement Battery for alps I9220
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Cover Cases for alps I9220
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |