1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | alps |
Model | GT-i9300 clone |
Firmware | 4.1.1; eng.linux-server-build2.1355954149; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Display | 854 x 480; DPI: 240; Evaluated Size: 4,1" |
Touch screen | Multitouch 5 Point(s) |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 512 MB (486 MB available) |
Flash | 4 GB (3.589 GB actual); 8 GB (7.402 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM |
Mobile Networks | UMTS |
WiFi | wlan_mt6620; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Back camera | Photo: 1.0 MP; Max size: 1280x768; Focus: infinity; No flash |
Sensors | ami306 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
kxud9 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
cm3623 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
cm3623 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Type: Li-ion; Voltage: 4.2 |
FM radio | 76MHz to 108MHz + Transmitter |
KERNEL: Linux version 3.0.13 (linux-server-build2@linux-server-build2-desktop) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Dec 19 16:55:36 EST 2012
CODENAME: REL
Mainboard: android_4x_ics2
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: android_4x_ics2
DISPLAY: ALPS.ICS2.MP.V1.5
FINGERPRINT: samsung/android_4x_ics2/android_4x_ics2:4.1.1/IMM76D/1355954149:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<3>[357776.060711] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(close_stp) result(0)
<3>[357776.060731] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off start
<3>[357776.060744] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, BGF_EINT IRQ unregistered and disabled
<3>[357776.060760] (0)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[357776.060771] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, ALL_EINT IRQ unregistered and disabled
<3>[357776.060783] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[357776.060797] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[357776.060814] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[357776.060830] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_off:CMB-HW, hw_pwr_off finish
<3>[357776.060841] (0)[WMT-CORE][W]opfunc_pwr_off:HW_PWR_OFF ok
<3>[357776.060856] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC OFF]status(b:0 f:0 g:0 w:0 lpbk:0 coredump:0 wmt:0 sd1:0 sd2:0 stp:0)
<6>[357776.060901] (1)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[357776.060920] (1)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(4) type(3) ok
<7>[357776.064223] (1)[20240:unloadDriverThr] exit
<7>[357776.123002] (0)[20226:Thread-3063] exit
<7>[357776.133362] (1)[20231:Thread-3065] exit
<7>[357776.172002] (1)[20243:dmesg] exit
<7>[357776.172255] (1)[20243:dmesg] sig 17 to [20237:AsyncTask #2]
<7>[357776.196577] (1)[302:WifiStateMachin] fork [20245:WifiStateMachin]
<7>[357776.196940] (1)[20245:WifiStateMachin] set proc[20245] name: ->[loadDriverThrea]
<6>[357776.215312] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[357776.215327] (0)[WLAN] Power on
<3>[357776.215346] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[357776.215372] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[357776.215432] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[357776.215455] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO127)
<3>[357776.215471] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO126)
<3>[357776.215484] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[357776.215496] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[357776.215506] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[357776.215516] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[357776.215526] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[357776.215536] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[357776.215546] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[357776.215556] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[357776.215566] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[357776.215576] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[357776.215586] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[357776.215596] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[357776.215606] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[357776.215615] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[357776.215625] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[357776.215635] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[357776.215645] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO125)
<3>[357776.215655] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[357776.215668] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[357776.215690] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[357776.224092] (0)[254:er.ServerThread] fork [20246:er.ServerThread]
<7>[357776.225836] (1)[20246:er.ServerThread] set proc[20246] name: ->[Thread-3791]
<7>[357776.227476] (1)[20246:Thread-3791] exit
<7>[357776.260473] (0)WQ_WARN: cpu:0, proc:kworker/0:0, [thermal_zone_device_check+0x0/0x18]dur: 309994539 > 15ms
<3>[357776.420435] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[357776.420458] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[357776.420640] (0)[WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[357776.420654] (0)[STP-PSM] [E]_stp_psm_notify_stp(1137):ERROR! Invalid Action!!
<4>[357776.420660] (0)
<3>[357776.420686] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[357776.420700] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[357776.420711] (0)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[357776.420722] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[357776.420916] (0)mtk_get_bus_freq() return 260000
<3>[357776.421075] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[357776.421087] (0)Flush type = 4 Rx Queue
<3>[357776.421221] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[357776.421237] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[357776.421249] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[357776.421258] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[357776.421269] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[357776.421284] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[357776.421295] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[357776.421305] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[357776.421316] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[357776.426798] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[357776.432287] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[357776.437761] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[357776.437776] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[357776.437791] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[357776.437805] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[357776.448825] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[357776.448844] (0)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[357776.450675] (0)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[357776.454363] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[357776.454380] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120628171317
<3>[357776.454392] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[357776.454403] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[357776.454413] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001d
<3>[357776.454424] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1226
<3>[357776.454435] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa724
<3>[357776.454909] (0)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x483a
<3>[357776.454920] (0)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[357776.773216] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 788) ok
<3>[357776.773279] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[357776.773675] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf14b270)
<3>[357776.778405] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[357776.778856] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[357776.778869] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[357776.778881] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[357776.778891] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[357776.792430] (0)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[357776.792446] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[357776.792459] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[357776.792471] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[357776.792479] (0)board_sdio_ctrl force off before on
<6>[357776.792487] (0)mtk_wcn_cmb_sdio_off (3)
<5>[357776.792604] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<5>[357776.792702] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[357776.792719] (0)mtk_wcn_cmb_sdio_on (3)
<5>[357776.792831] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<3>[357776.792849] (0)msdc3 -> USR Resume <- msdc_pm() : L<1692> PID
<3>[357776.810630] (1)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[357776.810650] (1)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[357776.810665] (1)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<3>[357776.836005] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1762> PID
<3>[357776.856901] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4084> PID
<3>[357776.856940] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[357776.856957] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[357776.856973] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[357776.857978] (0)mmc2: new high speed SDIO card at address 0001
<6>[357776.860605] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[357776.860619] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[357776.860630] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[357776.860640] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[357776.860649] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[357776.860762] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[357776.860796] (0)WQ_WARN: cpu:4, proc:kworker/u:4, [mmc_rescan+0x0/0x2dc]dur: 67358231 > 15ms
<6>[357776.950475] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[357776.950643] (0)[2:kthreadd] fork [20247:kthreadd]
<6>[357776.950673] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[357776.950685] (1)[RT_MONITOR]WARNNING [20247:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [20247:ksdioirqd/mmc2]
<5>[357776.950737] (0)[wlan] net_device prDev(0xc6f2f000) allocated
<5>[357776.953775] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[357776.958760] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[357776.958824] (0)[wlan] Virtual Address = e2be5000 for COMMON MGMT MEMORY POOL.
<5>[357776.958839] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[357776.958860] (0)[wlan] Virtual Address = e2be7000 for SW_RFB_T.
<5>[357776.958873] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[357776.958894] (0)[wlan] Virtual Address = e2beb000 for MSDU_INFO_T.
<6>[357776.958909] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[357776.970564] (0)[wlan] Chip ID: 0x6620
<6>[357776.970577] (0)[wlan] Revision ID: 0x1
<7>[357777.568799] (1)WQ_WARN: cpu:4, proc:kworker/u:4, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 26361923 > 15ms
<7>[357777.570490] (0)WQ_WARN: cpu:0, proc:kworker/0:0, [thermal_zone_device_check+0x0/0x18]dur: 310045692 > 15ms
<6>[357777.629742] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[357777.818346] (0)[18944:pool-1-thread-2] fork [20248:pool-1-thread-2]
<7>[357777.818393] (1)[20248:pool-1-thread-2] set proc[20248] name: ->[RefQueueWorker@]
<7>[357777.850785] (1)[20248:RefQueueWorker@] exit
<6>[357778.020481] (0)[wlan] Ready bit asserted
<5>[357778.034601] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[357778.034620] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[357778.034668] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[357778.034757] (0)[wlan] Domain: map=0, idx=0, code=0x0000
<7>[357778.036777] (1)[2:kthreadd] fork [20249:kthreadd]
<5>[357778.036827] (1)[wlan] tx_thread starts running...
<6>[357778.038428] (1)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[357778.038443] (1)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[357778.038462] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[357778.042524] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[357778.042566] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[357778.042757] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[357778.044090] (0)[20245:loadDriverThrea] exit
<6>[357778.055517] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[357778.055541] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[357778.056878] (0)init: starting `wpa_supplicant`
<7>[357778.057088] (0)[1:init] fork [20250:init]
<7>[357778.058770] (0)[302:WifiStateMachin] fork [20251:WifiStateMachin]
<7>[357778.059088] (0)[20251:WifiStateMachin] set proc[20251] name: ->[WifiMonitor]
<7>[357778.059749] (1)[20250:init] set proc[20250] name: ->[logwrapper]
<7>[357778.062938] (1)[20250:logwrapper] fork [20252:logwrapper]
<7>[357778.064059] (0)[20252:logwrapper] set proc[20252] name: ->[wpa_supplicant]
<7>[357778.099314] (0)[20228:com.specdevice] exit
<5>[357778.211963] (0)[wlan] N=0 closed
<5>[357778.211995] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 314178480
<5>[357778.212012] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[357778.212872] (1)[wlan] NAF=0,0,0
<6>[357778.212894] (1)[wlan] NAF=0,0,0
<5>[357778.422560] (0)[wlan] [13] TRANSITION: [0] -> [2]
<7>[357778.572096] (1)WQ_WARN: cpu:4, proc:kworker/u:4, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 19995847 > 15ms
<7>[357778.679968] (1)[20204:ReferenceQueueD] exit
<7>[357778.680150] (0)[20206:FinalizerDaemon] exit
<7>[357778.682249] (0)[20208:FinalizerWatchd] exit
<7>[357778.687979] (0)[103:zygote] fork [20253:zygote]
<7>[357778.688907] (0)[103:zygote] fork [20254:zygote]
<7>[357778.688920] (1)[20253:zygote] fork [20255:zygote]
<7>[357778.689045] (0)[20254:zygote] set proc[20254] name: ->[ReferenceQueueD]
<7>[357778.689474] (1)[20255:zygote] set proc[20255] name: ->[GC]
<7>[357778.689868] (0)[103:zygote] fork [20256:zygote]
<7>[357778.690578] (1)[20253:zygote] fork [20257:zygote]
<7>[357778.690621] (0)[20257:zygote] set proc[20257] name: ->[Signal Catcher]
<7>[357778.690850] (1)[20256:zygote] set proc[20256] name: ->[FinalizerDaemon]
<7>[357778.691047] (1)[20253:zygote] fork [20258:zygote]
<7>[357778.691512] (0)[103:zygote] fork [20259:zygote]
<7>[357778.691551] (0)[20258:zygote] set proc[20258] name: ->[Compiler]
<7>[357778.691799] (1)[20259:zygote] set proc[20259] name: ->[FinalizerWatchd]
<7>[357778.693827] (1)[20253:zygote] fork [20260:zygote]
<7>[357778.694144] (0)[20260:zygote] set proc[20260] name: ->[ReferenceQueueD]
<7>[357778.694676] (1)[20253:zygote] fork [20261:zygote]
<7>[357778.694918] (0)[20261:zygote] set proc[20261] name: ->[FinalizerDaemon]
<7>[357778.695338] (1)[20253:zygote] fork [20262:zygote]
<7>[357778.695510] (0)[20262:zygote] set proc[20262] name: ->[FinalizerWatchd]
<7>[357778.696586] (1)[20253:zygote] set proc[20253] name: ->[.android.chrome]
<7>[357778.701029] (0)[25980:logcat] sig 13 to [25980:logcat]
<7>[357778.701143] (1)[20253:.android.chrome] fork [20263:.android.chrome]
<7>[357778.701169] (0)[24538:logcat] sig 13 to [24538:logcat]
<7>[357778.701419] (0)[20263:.android.chrome] set proc[20263] name: ->[Binder Thread #]
<7>[357778.701968] (1)[24867:logcat] sig 13 to [24867:logcat]
<7>[357778.702157] (0)[29102:logcat] sig 13 to [29102:logcat]
<7>[357778.702763] (1)[20263:Binder Thread #] fork [20264:Binder Thread #]
<7>[357778.702818] (0)[20264:Binder Thread #] set proc[20264] name: ->[Binder Thread #]
<7>[357778.703528] (1)[20253:.android.chrome] set proc[20253] name: ->[re-initialized>]
<7>[357778.713035] (0)[19288:logcat] sig 13 to [19288:logcat]
<7>[357778.713204] (0)[26738:logcat] sig 13 to [26738:logcat]
<7>[357778.713334] (0)[12294:logcat] sig 13 to [12294:logcat]
<7>[357778.713499] (0)[20492:logcat] sig 13 to [20492:logcat]
<7>[357778.713674] (0)[7706:logcat] sig 13 to [7706:logcat]
<7>[357778.713802] (0)[18339:logcat] sig 13 to [18339:logcat]
<7>[357778.713929] (0)[6167:logcat] sig 13 to [6167:logcat]
<7>[357778.714052] (0)[13612:logcat] sig 13 to [13612:logcat]
<7>[357778.714182] (0)[5982:logcat] sig 13 to [5982:logcat]
<7>[357778.714376] (0)[30852:logcat] sig 13 to [30852:logcat]
<7>[357778.714509] (0)[5676:logcat] sig 13 to [5676:logcat]
<7>[357778.714632] (0)[4686:logcat] sig 13 to [4686:logcat]
<7>[357778.714754] (0)[14034:logcat] sig 13 to [14034:logcat]
<7>[357778.715028] (0)[26439:logcat] sig 13 to [26439:logcat]
<7>[357778.715899] (0)[8063:logcat] sig 13 to [8063:logcat]
<7>[357778.721244] (1)[20253:re-initialized>] set proc[20253] name: ->[.android.chrome]
<7>[357778.744593] (1)[20237:AsyncTask #2] fork [20265:AsyncTask #2]
<7>[357778.764028] (0)[20265:AsyncTask #2] set proc[20265] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1.5
ro.build.version.incremental=eng.linux-server-build2.1355954149
ro.custom.build.version=1355954149
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Wed Dec 19 16:57:14 EST 2012
ro.build.date.utc=1355954234
ro.build.type=user
ro.build.user=linux-server-build2
ro.build.host=linux-server-build2-desktop
ro.build.tags=test-keys
ro.product.model=GT-i9300
ro.product.brand=samsung
ro.product.name=android_4x_ics2
ro.product.device=android_4x_ics2
ro.product.board=android_4x_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=android_4x_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=android_4x_ics2-user 4.1.1 IMM76D eng.linux-server-build2.1355954149 test-keys
ro.build.fingerprint=samsung/android_4x_ics2/android_4x_ics2:4.1.1/IMM76D/1355954149:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
persist.sys.timezone=Asia/Shanghai
ro.mospec.internal.version=H800S3Dv01.02b02
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.5
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6620
mediatek.wlan.module.postfix=
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6620 286288 0 - Live 0xbf205000 (P)
cfg80211 122012 0 - Live 0xbf1dc000
mtk_fm_priv 8917 0 - Live 0xbf1d6000 (P)
mt6620_fm_drv 111949 1 mtk_fm_priv, Live 0xbf1ae000
mtk_stp_bt 39986 0 - Live 0xbf1a1000
mtk_stp_gps 37294 0 - Live 0xbf194000
mtk_stp_uart 21593 1 - Live 0xbf18b000 (P)
mtk_stp_wmt 376244 8 wlan_mt6620,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf121000 (P)
mtk_hif_sdio 18769 2 wlan_mt6620,mtk_stp_wmt, Live 0xbf118000
devinfo 840 0 - Live 0xbf114000 (P)
devapc 4553 0 - Live 0xbf10f000 (P)
sec 90381 0 - Live 0xbf0f2000 (P)
vcodec_kernel_driver 42938 0 - Live 0xbf0e2000 (P)
m4u 113423 26 - Live 0xbf0bd000 (P)
ccmni 17134 0 - Live 0xbf0b4000 (P)
ccci 117392 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127170 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23590 0 - Live 0xbf054000
pvrsrvkm 233127 115 mtklfb, Live 0xbf00d000
mtk_hwe 1386 0 - Live 0xbf009000 (P)
aed 16384 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.589 GB actual); 8 GB (7.402 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 7.402 GB
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |