1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Основные характеристики | |
---|---|
Производитель | Samsung |
Модель | Galaxy SIII |
Версия Andriod | 4.0.4; eng.root.1358591964; SDK15 |
Процессор | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001.0 MHz; Min: 250.2 MHz |
Дисплей | 800 x 480; DPI: 128; Evaluated Size: 7.3" |
Сенсорный экран | Multitouch 5 Point(s) |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
ОЗУ | 512 MB (484 MB available) |
Память | 4 GB (3.589 GB actual); 16 GB (14.640 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM, Dual SIM |
Типы сетей | HSPA |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Доп. камера | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Датчики | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0.002 (0%); power: 0.25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0.01%); power: 0.13mA; | |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Type: Li-ion; Voltage: 4.2 |
FM radio | Supported by chipset |
KERNEL: Linux version 3.0.13 (root@coolpig-desktop) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sat Jan 19 18:39:13 CST 2013
CODENAME: REL
Mainboard: GT-I9300
BRAND: Samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: GT-I9300
DISPLAY: Galaxy SIII
FINGERPRINT: Samsung/GT-I9300/GT-I9300:4.0.4/IMM76D/1358591964:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 0000
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<6>[27889.627997] (0)[Gsensor] [FFFFFF0D FFFFFFF3 FFFFFFDA] => [ -243 -13 -38] after
<7>[27889.662488] (0)[13107:dmesg] exit
<7>[27889.662757] (0)[13107:dmesg] sig 17 to [13106:AsyncTask #3]
<6>[27889.687806] (0)[Gsensor] [FFFFFF05 FFFFFFE5 FFFFFFE4] => [ -251 -27 -28] after
<7>[27889.699315] (1)[1753:WifiStateMachin] fork [13108:WifiStateMachin]
<7>[27889.700453] (1)[13108:WifiStateMachin] set proc[13108] name: ->[loadDriverThrea]
<6>[27889.723768] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[27889.723781] (0)[WLAN] Power on
<3>[27889.723798] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[27889.724616] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[27889.724684] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[27889.725831] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[27889.726640] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO122)
<3>[27889.727673] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[27889.728641] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[27889.729374] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO15)
<3>[27889.730154] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(18)
<3>[27889.730995] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO17)
<3>[27889.732036] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(17)
<3>[27889.732823] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[27889.733591] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[27889.734361] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[27889.735128] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[27889.735887] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[27889.736640] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[27889.737581] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[27889.738828] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO206)
<3>[27889.739721] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO112)
<3>[27889.740499] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[27889.741725] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[27889.742679] (0)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[27889.743554] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[27889.744532] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<6>[27889.749844] (0)[Gsensor] [FFFFFF05 FFFFFFE7 FFFFFFEB] => [ -251 -25 -21] after
<3>[27889.750178] (0)[WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<6>[27889.809462] (0)[Gsensor] [FFFFFF0D FFFFFFE9 FFFFFFE7] => [ -243 -23 -25] after
<7>[27889.815705] (0)[13089:Thread-2681] exit
<6>[27889.867754] (0)[Gsensor] [FFFFFF0D FFFFFFF1 FFFFFFE9] => [ -243 -15 -23] after
<6>[27889.929239] (0)[Gsensor] [FFFFFF09 FFFFFFE7 FFFFFFE5] => [ -247 -25 -27] after
<7>[27889.945615] (1)[13098:Thread-2682] exit
<3>[27889.956880] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[27889.957706] (0)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[27889.959955] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[27889.961109] (0)[STP-PSM] [E]_stp_psm_notify_stp(1147):ERROR! Invalid Action!!
<4>[27889.961116] (0)
<3>[27889.963507] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[27889.965639] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[27889.967538] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[27889.971803] (0)mtk_get_bus_freq() return 260000
<3>[27889.972826] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[27889.978736] (0)Flush type = 4 Rx Queue
<3>[27889.979413] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[27889.981857] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[27889.981877] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<7>[27889.986224] (0)[309:er.ServerThread] fork [13109:er.ServerThread]
<6>[27889.988001] (0)[Gsensor] [FFFFFF06 FFFFFFE4 FFFFFFEA] => [ -250 -28 -22] after
<4>[27889.988323] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<7>[27889.991758] (1)[13109:er.ServerThread] set proc[13109] name: ->[Thread-3040]
<4>[27889.992254] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[27889.996946] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[27889.996965] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[27889.996977] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[27889.996991] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[27890.002714] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<7>[27890.006051] (0)[13109:Thread-3040] exit
<3>[27890.009254] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[27890.016009] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[27890.017066] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[27890.018162] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[27890.019411] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[27890.031853] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[27890.032706] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[27890.043027] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[27890.043819] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[27890.045869] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[27890.046980] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120903180713a
<3>[27890.048006] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<6>[27890.048880] (0)[Gsensor] [FFFFFF08 FFFFFFE4 FFFFFFF1] => [ -248 -28 -15] after
<3>[27890.049220] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[27890.050065] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[27890.051030] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = 1226
<3>[27890.051979] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<6>[27890.107889] (0)[Gsensor] [FFFFFF09 FFFFFFE7 FFFFFFEA] => [ -247 -25 -22] after
<6>[27890.169932] (0)[Gsensor] [FFFFFF08 FFFFFFEB FFFFFFEF] => [ -248 -21 -17] after
<3>[27890.192651] (0)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(21, 832) ok
<3>[27890.194117] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf147370)
<3>[27890.195754] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[27890.198981] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[27890.198995] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[27890.199007] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[27890.199018] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<3>[27890.218754] (0)[WMT-IC][I]mt6628_sw_init:co-clock disabled.
<3>[27890.220232] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[27890.220918] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[27890.221765] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[27890.221777] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[27890.221789] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[27890.222494] (0)board_sdio_ctrl force off before on
<6>[27890.222501] (0)mtk_wcn_cmb_sdio_off (3)
<5>[27890.222619] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<5>[27890.223516] (0)[Power/clkmgr] [freq_meter] data = 15495, freq = 196 MHz
<6>[27890.224332] (0)mtk_wcn_cmb_sdio_on (3)
<5>[27890.224443] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<3>[27890.225259] (0)msdc3 -> USR Resume <- msdc_pm() : L<1799> PID
<6>[27890.227842] (0)[Gsensor] [FFFFFF04 FFFFFFE0 FFFFFFEA] => [ -252 -32 -22] after
<3>[27890.247045] (1)msdc3 -> ================ <- msdc_set_mclk() : L<1021> PID
<3>[27890.248137] (1)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<1023> PID
<3>[27890.249840] (1)msdc3 -> ================ <- msdc_set_mclk() : L<1024> PID
<3>[27890.275380] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1869> PID
<6>[27890.287936] (0)[Gsensor] [FFFFFF06 FFFFFFEB FFFFFFE8] => [ -250 -21 -24] after
<3>[27890.292615] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4200> PID
<3>[27890.293862] (0)msdc3 -> ================ <- msdc_set_mclk() : L<1021> PID
<3>[27890.294982] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<1023> PID
<3>[27890.296738] (0)msdc3 -> ================ <- msdc_set_mclk() : L<1024> PID
<6>[27890.300498] (0)mmc2: new high speed SDIO card at address 0001
<6>[27890.305608] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[27890.305691] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[27890.305731] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[27890.305765] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[27890.305799] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[27890.305831] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[27890.306113] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[27890.306218] (0)WQ_WARN: cpu:4, proc:kworker/u:3, [mmc_rescan+0x0/0x324]dur: 78920846 > 15ms
<6>[27890.348061] (0)[Gsensor] [FFFFFF07 FFFFFFE8 FFFFFFED] => [ -249 -24 -19] after
<6>[27890.386943] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[27890.387371] (1)[2:kthreadd] fork [13110:kthreadd]
<6>[27890.387440] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[27890.387546] (0)[wlan] net_device prDev(0xc66f8000) allocated
<5>[27890.391641] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<4>[27890.394017] (0)[RT_MONITOR]WARNNING [13110:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [13110:ksdioirqd/mmc2]
<5>[27890.399597] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[27890.400871] (0)[wlan] Virtual Address = e15df000 for COMMON MGMT MEMORY POOL.
<5>[27890.402136] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[27890.403240] (0)[wlan] Virtual Address = e15e1000 for SW_RFB_T.
<5>[27890.404263] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[27890.405194] (0)[wlan] Virtual Address = e15e5000 for MSDU_INFO_T.
<6>[27890.405975] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[27890.411381] (0)[Gsensor] [FFFFFF09 FFFFFFEA FFFFFFEC] => [ -247 -22 -20] after
<6>[27890.417384] (0)[wlan] Chip ID: 0x6628
<6>[27890.417399] (0)[wlan] Revision ID: 0x0
<6>[27890.467758] (0)[Gsensor] [FFFFFF0A FFFFFFEC FFFFFFE7] => [ -246 -20 -25] after
<6>[27890.527741] (0)[Gsensor] [FFFFFF09 FFFFFFEA FFFFFFEA] => [ -247 -22 -22] after
<6>[27890.587746] (0)[Gsensor] [FFFFFF0A FFFFFFEA FFFFFFE0] => [ -246 -22 -32] after
<6>[27890.649633] (0)[Gsensor] [FFFFFF06 FFFFFFE8 FFFFFFE5] => [ -250 -24 -27] after
<6>[27890.707760] (0)[Gsensor] [FFFFFF08 FFFFFFEA FFFFFFDB] => [ -248 -22 -37] after
<6>[27890.767824] (0)[Gsensor] [FFFFFF09 FFFFFFEA FFFFFFDA] => [ -247 -22 -38] after
<6>[27890.829852] (0)[Gsensor] [FFFFFF08 FFFFFFEA FFFFFFD6] => [ -248 -22 -42] after
<6>[27890.887770] (0)[Gsensor] [FFFFFF05 FFFFFFE9 FFFFFFDD] => [ -251 -23 -35] after
<6>[27890.947880] (0)[Gsensor] [FFFFFF09 FFFFFFEC FFFFFFD1] => [ -247 -20 -47] after
<6>[27891.007740] (0)[Gsensor] [FFFFFF0C FFFFFFE9 FFFFFFD1] => [ -244 -23 -47] after
<6>[27891.067741] (0)[Gsensor] [FFFFFF0D FFFFFFE8 FFFFFFCB] => [ -243 -24 -53] after
<6>[27891.127800] (0)[Gsensor] [FFFFFF0A FFFFFFE8 FFFFFFD9] => [ -246 -24 -39] after
<6>[27891.170503] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[27891.186948] (0)[wlan] Ready bit asserted
<6>[27891.187756] (0)[Gsensor] [FFFFFF08 FFFFFFE8 FFFFFFD6] => [ -248 -24 -42] after
<5>[27891.222398] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[27891.223435] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[27891.224174] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[27891.224223] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[27891.224303] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[27891.225430] (1)[2:kthreadd] fork [13111:kthreadd]
<5>[27891.225457] (0)[wlan] tx_thread starts running...
<6>[27891.247739] (0)[Gsensor] [FFFFFF09 FFFFFFE9 FFFFFFD6] => [ -247 -23 -42] after
<6>[27891.307999] (0)[Gsensor] [FFFFFF0B FFFFFFE9 FFFFFFD3] => [ -245 -23 -45] after
<6>[27891.321197] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[27891.321248] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[27891.321309] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[27891.322890] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[27891.323683] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[27891.325429] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[27891.329230] (0)[13108:loadDriverThrea] exit
<6>[27891.367810] (0)[Gsensor] [FFFFFF08 FFFFFFEB FFFFFFDA] => [ -248 -21 -38] after
<7>[27891.374940] (1)[2:kthreadd] fork [13112:kthreadd]
<6>[27891.375186] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[27891.375213] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[27891.392301] (1)init: starting `wpa_supplicant`
<7>[27891.393039] (1)[1:init] fork [13113:init]
<7>[27891.394086] (1)[1753:WifiStateMachin] fork [13114:WifiStateMachin]
<7>[27891.394400] (0)[13113:init] set proc[13113] name: ->[logwrapper]
<7>[27891.396413] (0)[13113:logwrapper] fork [13115:logwrapper]
<7>[27891.397150] (0)[13114:WifiStateMachin] set proc[13114] name: ->[WifiMonitor]
<7>[27891.398088] (1)[13115:logwrapper] set proc[13115] name: ->[wpa_supplicant]
<6>[27891.427923] (0)[Gsensor] [FFFFFF09 FFFFFFE9 FFFFFFDA] => [ -247 -23 -38] after
<6>[27891.487741] (0)[Gsensor] [FFFFFF08 FFFFFFE8 FFFFFFDB] => [ -248 -24 -37] after
<5>[27891.507554] (0)[wlan] N=0 closed
<5>[27891.508121] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 26486170
<5>[27891.508887] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[27891.510485] (0)[wlan] NAF=0,0,0
<6>[27891.510504] (0)[wlan] NAF=0,0,0
<6>[27891.547858] (0)[Gsensor] [FFFFFF09 FFFFFFE7 FFFFFFDA] => [ -247 -25 -38] after
<6>[27891.609018] (0)[Gsensor] [FFFFFF07 FFFFFFE9 FFFFFFE1] => [ -249 -23 -31] after
<6>[27891.667925] (0)[Gsensor] [FFFFFF0B FFFFFFE8 FFFFFFDC] => [ -245 -24 -36] after
<5>[27891.670061] (0)[wlan] [13] TRANSITION: [0] -> [2]
<6>[27891.733722] (0)[Gsensor] [FFFFFF09 FFFFFFEA FFFFFFDD] => [ -247 -22 -35] after
<6>[27891.787865] (0)[Gsensor] [FFFFFF09 FFFFFFE8 FFFFFFDE] => [ -247 -24 -34] after
<5>[27891.810414] (0)[wlan] CMD set_band=0
<6>[27891.848650] (0)[Gsensor] [FFFFFF08 FFFFFFE9 FFFFFFE0] => [ -248 -23 -32] after
<6>[27891.908000] (0)[Gsensor] [FFFFFF09 FFFFFFE9 FFFFFFDC] => [ -247 -23 -36] after
<6>[27891.968060] (0)[Gsensor] [FFFFFF08 FFFFFFE8 FFFFFFDD] => [ -248 -24 -35] after
<5>[27891.998329] (0)[wlan] [13] TRANSITION: [2] -> [0]
<6>[27892.001067] (1)[wlan] NAF=0,0,0
<7>[27892.021216] (0)[13106:AsyncTask #3] fork [13116:AsyncTask #3]
<7>[27892.023958] (0)[309:er.ServerThread] fork [13117:er.ServerThread]
<7>[27892.025696] (0)[13117:er.ServerThread] set proc[13117] name: ->[NotificationPla]
<6>[27892.028099] (0)[Gsensor] [FFFFFF08 FFFFFFE8 FFFFFFDC] => [ -248 -24 -36] after
<7>[27892.029224] (0)[13117:NotificationPla] fork [13118:NotificationPla]
<7>[27892.029287] (1)[13118:NotificationPla] set proc[13118] name: ->[Thread-3043]
<7>[27892.040448] (0)[13116:AsyncTask #3] set proc[13116] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.vsun.swver=ICS_4.0.4_Galaxy SIII mod Oniech Oprekerz
ro.build.vsun.hwver=R9A-P3
ro.build.id=IMM76D
ro.build.display.id=Galaxy SIII
ro.build.version.incremental=eng.root.1358591964
ro.custom.build.version=1358591964
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2013年 01月 19日 星期六 18:45:56 CST
ro.build.date.utc=1358592356
ro.build.type=user
ro.build.user=root
ro.build.host=coolpig-desktop
ro.build.tags=test-keys
ro.product.model=Galaxy SIII
ro.product.brand=Samsung
ro.product.name=GT-I9300
ro.product.device=GT-I9300
ro.product.board=GT-I9300
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=id
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9300
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9300-user 4.0.4 IMM76D eng.root.1358591964 test-keys
ro.build.fingerprint=Samsung/GT-I9300/GT-I9300:4.0.4/IMM76D/1358591964:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# for default properties
persist.sys.localevar=
persist.sys.timezone=Asia/Jakarta
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.18
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ril.external.md=1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=Cherry_Tone-1.mp3
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Cherry_Caribbean.mp3
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
ro.sf.lcd_density=128
### Pimp my Rom : BRAVIA Engine 2
ro.service.swiqi2.supported=true
persist.service.swiqi2.enable=1
wlan_mt6628 276854 0 - Live 0xbf1fa000 (P)
cfg80211 121856 0 - Live 0xbf1d1000
mtk_fm_priv 2855 0 - Live 0xbf1cd000 (P)
mtk_fm_drv 108923 1 mtk_fm_priv, Live 0xbf1aa000
mtk_stp_bt 39986 0 - Live 0xbf19d000
mtk_stp_gps 37294 0 - Live 0xbf190000
mtk_stp_uart 21589 0 - Live 0xbf187000 (P)
mtk_stp_wmt 375342 8 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11d000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf114000
devinfo 840 0 - Live 0xbf110000 (P)
devapc 4553 0 - Live 0xbf10b000 (P)
sec 90923 0 - Live 0xbf0ee000 (P)
vcodec_kernel_driver 42942 2 - Live 0xbf0de000 (P)
m4u 114125 24 - Live 0xbf0b9000 (P)
ccmni 17150 0 - Live 0xbf0b0000 (P)
ccci 117408 15 ccmni, Live 0xbf088000 (P)
ccci_plat 127716 2 ccmni,ccci, Live 0xbf05f000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05a000 (P)
mtklfb 23558 0 - Live 0xbf050000
pvrsrvkm 233143 91 mtklfb, Live 0xbf009000
aed 16304 3 - Live 0xbf000000 (P)
RAM: 512 MB (484 MB available)
System RAM: 484.000MB
mtkfb.0: 6.000MB
Flash: 4 GB (3.589 GB actual); 16 GB (14.640 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 14.640 GB
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |