1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | Prestigio |
Model | PAP4040_DUO |
Firmware | 4.0.4; eng..1351763875; SDK15 |
CPU | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Display | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Touch screen | Multitouch 5 Point(s) |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263 |
RAM | 512 MB (486 MB available) |
Flash | 4 GB (3.631 GB actual); 16 GB (14.837 GB actual) (see memory map tab) |
Communications | |
Phone | GSM, Dual SIM |
Mobile Networks | GPRS |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Back camera | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
Sensors | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Vibrator | Yes |
Supported languages | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Battery | Type: Li-ion; Voltage: 4.2 |
FM radio | 76 to 108MHz |
KERNEL: Linux version 3.0.13 (queen@dell-desktop) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Thu Nov 1 17:57:36 CST 2012
CODENAME: REL
Mainboard: PAP4040DUO
BRAND: Prestigio
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: PAP4040DUO
DISPLAY: PAP4040DUO.20121101.V1.0.10
FINGERPRINT: unknown
HARDWARE: mt6575
ID: PrestigioPAP4040DUO
TAGS: release-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<5>[ 4813.221147] [Power/Alarm] alarm_timer_triggered type 3 at 15416.528005480 (1)
<5>[ 4813.222413] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4813.243820] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4813.244499] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4813.252228] [Power/Alarm] alarm 1 set 1366633429.100000000
<5>[ 4813.255635] [Power/Alarm] alarm wait (0x0)
<7>[ 4813.295268] [307:WifiStateMachin] fork err at pid
<4>[ 4813.295319] [loadDriverThrea]
<6>[ 4813.347461] [WLAN] rfkill_set_block(blocked 0)
<6>[ 4813.347471] [WLAN] Power on
<3>[ 4813.347484] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 4813.348280] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 4813.348311] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 4813.349377] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO183)
<5>[ 4813.351442] [BLOCK_TAG] mmcqd pid:45, timeline 4813351420692, duty 220970388, period 501869692, 44% I/O time occupied, rq_count=47
<5>[ 4813.352908] [BLOCK_TAG] mmcqd pid:45, WRITE size: 303104 bytes, delta time:172864847, throughput: 1754 kB/s
<5>[ 4813.354123] [BLOCK_TAG] mmcqd pid:45, READ size: 442368 bytes, delta time:48105541, throughput: 9196 kB/s
<3>[ 4813.355440] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO187)
<3>[ 4813.356135] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 4813.356916] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 4813.357619] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 4813.358359] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 4813.359116] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 4813.359867] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 4813.382835] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 4813.383567] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 4813.384443] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 4813.385240] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 4813.385957] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 4813.386673] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 4813.387410] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 4813.388517] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[ 4813.389265] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO185)
<3>[ 4813.393251] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 4813.398059] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 4813.402445] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[ 4813.410392] [271:er.ServerThread] fork err at pid
<4>[ 4813.416339] [Thread-223]
<5>[ 4813.446580] [Power/Alarm] alarm_timer_triggered type 1 at 1366633429.100009862 (1)
<5>[ 4813.447981] [Power/Alarm] alarm 1 set 1366634212.347000000
<5>[ 4813.464886] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4813.465566] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4813.477691] [Power/Alarm] alarm wait (0x0)
<5>[ 4813.481265] [Power/Alarm] alarm 3 set 15416.836000000
<5>[ 4813.529158] [Power/Alarm] alarm_timer_triggered type 3 at 15416.836014942 (1)
<5>[ 4813.590399] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4813.609680] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4813.610531] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4813.619370] [Power/Alarm] alarm wait (0x0)
<3>[ 4813.619967] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 4813.620723] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT6620]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 4813.622323] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 4813.623273] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[ 4813.624307] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[ 4813.624313]
<3>[ 4813.625580] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 4813.626670] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 4813.627570] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 4813.628407] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 4813.629446] mt6575_get_bus_freq() return 260000
<3>[ 4813.630193] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 4813.630932] Flush type = 4 Rx Queue
<3>[ 4813.631456] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 4813.632252] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 4813.632263] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 4813.632902] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 4813.633598] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 4813.634292] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[ 4813.635096] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 4813.635106] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 4813.635116] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 4813.663553] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[ 4813.669867] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[ 4813.676272] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[ 4813.677210] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[ 4813.678252] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[ 4813.679455] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[ 4813.693497] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 4813.694307] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 4813.696957] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[ 4813.698452] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 4813.699399] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120419185021
<3>[ 4813.700379] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 4813.701172] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 4813.701975] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[ 4813.702777] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[ 4813.703579] [WMT-IC][I]mt6620_patch_dwn:===========================================
<5>[ 4813.714921] [Power/Alarm] alarm 3 set 15417.070000000
<3>[ 4813.761163] [WMT-DEV][E]wmt_dev_rx_timeout(746):gRxCount != 0 (1), reset it!
<3>[ 4813.762037] [WMT-CTRL][W]wmt_ctrl_rx:wmt_ctrl_rx be signaled, but no rx data(200)
<5>[ 4813.763147] [Power/Alarm] alarm_timer_triggered type 3 at 15417.070008942 (1)
<5>[ 4813.764425] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4813.890182] [BLOCK_TAG] mmcqd pid:45, timeline 4813890146923, duty 280841539, period 538733847, 52% I/O time occupied, rq_count=20
<5>[ 4813.891666] [BLOCK_TAG] mmcqd pid:45, WRITE size: 147456 bytes, delta time:247072001, throughput: 596 kB/s
<5>[ 4813.892857] [BLOCK_TAG] mmcqd pid:45, READ size: 106496 bytes, delta time:33769538, throughput: 3160 kB/s
<5>[ 4813.915429] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4813.916108] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4813.930224] [Power/Alarm] alarm wait (0x0)
<5>[ 4813.942668] [Power/Alarm] alarm 3 set 15417.298000000
<5>[ 4813.991157] [Power/Alarm] alarm_timer_triggered type 3 at 15417.298010711 (1)
<5>[ 4813.992567] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4814.012531] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4814.013210] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4814.023252] [Power/Alarm] alarm wait (0x0)
<5>[ 4814.034167] [Power/Alarm] alarm 3 set 15417.389000000
<5>[ 4814.082147] [Power/Alarm] alarm_timer_triggered type 3 at 15417.389006019 (1)
<5>[ 4814.083453] [Power/Alarm] alarm 3 set 15427.654000000
<3>[ 4814.084241] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 928) ok
<3>[ 4814.085173] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[ 4814.086421] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12dfc0)
<3>[ 4814.093472] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[ 4814.094467] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 4814.094480] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 4814.094491] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<5>[ 4814.101901] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4814.102580] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4814.106873] [Power/Alarm] alarm wait (0x0)
<3>[ 4814.111941] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[ 4814.112598] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 4814.112610] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 4814.112621] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 4814.113292] board_sdio_ctrl force off before on
<6>[ 4814.113299] mtk_wcn_cmb_sdio_off (3)
<6>[ 4814.113336] mtk_wcn_cmb_sdio_on (3)
<3>[ 4814.113368] msdc3 -> USR Resume <- msdc_pm() : L<1437> PID
<5>[ 4814.127944] [Power/Alarm] alarm 3 set 15417.483000000
<3>[ 4814.130132] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[ 4814.131151] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<758> PID
<3>[ 4814.132784] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<3>[ 4814.158557] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1497> PID
<5>[ 4814.176148] [Power/Alarm] alarm_timer_triggered type 3 at 15417.483007403 (1)
<5>[ 4814.177438] [Power/Alarm] alarm 3 set 15427.654000000
<3>[ 4814.194099] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3422> PID
<3>[ 4814.195256] msdc3 -> ================ <- msdc_set_mclk() : L<756> PID
<3>[ 4814.196271] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<758> PID
<3>[ 4814.197927] msdc3 -> ================ <- msdc_set_mclk() : L<759> PID
<5>[ 4814.204986] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4814.205664] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4814.210094] [Power/Alarm] alarm wait (0x0)
<6>[ 4814.227774] mmc2: new high speed SDIO card at address 0001
<6>[ 4814.229748] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 4814.229761] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 4814.229771] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 4814.229780] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 4814.229788] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 4814.229875] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 4814.229914] WQ_WARN: cpu:1, proc:kworker/u:2, dur: 115124231 > 8ms
<7>[ 4814.229959] work: mmc_rescan+0x0/0x370
<5>[ 4814.232901] [Power/Alarm] alarm 3 set 15417.588000000
<6>[ 4814.269966] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 4814.270064] [2:kthreadd] fork err at pid
<5>[ 4814.281155] [Power/Alarm] alarm_timer_triggered type 3 at 15417.588012096 (1)
<6>[ 4814.282098] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 4814.282127] [wlan] net_device prDev(0xc9ff5000) allocated
<4>[ 4814.283055] [RT_MONITOR]WARNNING [3420:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [3420:ksdioirqd/mmc2]
<4>[ 4814.285501] Backtrace:
<4>[ 4814.285813] [
<5>[ 4814.292098] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[ 4814.293268] r7:00000001 r6:00000000 r5:c182e000 r4:cda78c00
<4>[ 4814.293984] [
<5>[ 4814.297269] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 4814.298177] [wlan] Virtual Address = df903000 for COMMON MGMT MEMORY POOL.
<5>[ 4814.299022] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 4814.299683] [wlan] Virtual Address = df940000 for SW_RFB_T.
<5>[ 4814.300490] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 4814.301176] [wlan] Virtual Address = df944000 for MSDU_INFO_T.
<6>[ 4814.301891] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[ 4814.310030] [
<4>[ 4814.311239] [
<4>[ 4814.312388] [
<4>[ 4814.313416] [
<4>[ 4814.314343] r7:00000013 r6:c008a250 r5:c00a18d8 r4:dd917d78
<6>[ 4814.330028] [wlan] Chip ID: 0x6620
<6>[ 4814.330041] [wlan] Revision ID: 0x1
<5>[ 4814.351711] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4814.367307] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4814.367986] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4814.377700] [Power/Alarm] alarm wait (0x0)
<5>[ 4814.382008] [Power/Alarm] alarm 1 set 1366633431.100000000
<6>[ 4815.085298] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<5>[ 4815.446577] [Power/Alarm] alarm_timer_triggered type 1 at 1366633431.100006401 (1)
<5>[ 4815.447937] [Power/Alarm] alarm 1 set 1366634212.347000000
<5>[ 4815.449099] [BLOCK_TAG] MMC queue thread: 45, 49, 47, 52, 0
<5>[ 4815.449796] [BLOCK_TAG] mmcqd pid:45, timeline 4814366901461, duty 129384229, period 1558924384, 8% I/O time occupied, rq_count=23
<5>[ 4815.451301] [BLOCK_TAG] mmcqd pid:45, WRITE size: 237568 bytes, delta time:116891075, throughput: 2033 kB/s
<5>[ 4815.452514] [BLOCK_TAG] mmcqd pid:45, READ size: 290816 bytes, delta time:12493154, throughput: 23452 kB/s
<6>[ 4815.459983] [wlan] Ready bit asserted
<5>[ 4815.478144] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4815.478823] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4815.487390] [Power/Alarm] alarm wait (0x0)
<5>[ 4815.490641] [Power/Alarm] alarm 3 set 15418.846000000
<5>[ 4815.501471] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 4815.502063] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 4815.502130] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 4815.502209] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 4815.504373] [2:kthreadd] fork err at pid
<5>[ 4815.512930] [wlan] tx_thread starts running...
<6>[ 4815.514580] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 4815.514593] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 4815.514611] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 4815.516475] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[ 4815.516484]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 4815.518261] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 4815.519052] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 4815.519850] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 4815.523292] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 4815.523299]
<4>[ 4815.524395] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 4815.525278] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[ 4815.525285]
<3>[ 4815.526451] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<5>[ 4815.539154] [Power/Alarm] alarm_timer_triggered type 3 at 15418.846010942 (1)
<5>[ 4815.540472] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4815.556842] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4815.557522] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4815.567543] [Power/Alarm] alarm wait (0x0)
<5>[ 4815.579682] [Power/Alarm] alarm 3 set 15418.935000000
<7>[ 4815.595545] [1993:kworker/u:2] fork err at pid
<7>[ 4815.595592] [3422:kworker/u:2] fork err at pid
<6>[ 4815.598612] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 4815.598639] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 4815.610534] WQ_WARN: cpu:0, proc:kworker/0:0, dur: 12020077 > 8ms
<7>[ 4815.610665] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[ 4815.611758] [1:init] fork err at pid
<7>[ 4815.612475] [307:WifiStateMachin] fork err at pid
<4>[ 4815.612596] [WifiMonitor]
<4>[ 4815.621381] [logwrapper]
<7>[ 4815.623538] [3424:logwrapper] fork err at pid
<4>[ 4815.625655] [wpa_supplicant]
<5>[ 4815.628151] [Power/Alarm] alarm_timer_triggered type 3 at 15418.935010788 (1)
<5>[ 4815.629446] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4815.652205] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4815.652884] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4815.660222] [Power/Alarm] alarm wait (0x0)
<5>[ 4815.665643] [Power/Alarm] alarm 3 set 15419.021000000
<5>[ 4815.714147] [Power/Alarm] alarm_timer_triggered type 3 at 15419.021006403 (1)
<5>[ 4815.715422] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4815.732548] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4815.733226] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4815.741440] [Power/Alarm] alarm wait (0x0)
<5>[ 4815.762425] [Power/Alarm] alarm 3 set 15419.118000000
<5>[ 4815.811148] [Power/Alarm] alarm_timer_triggered type 3 at 15419.118006480 (1)
<5>[ 4815.812422] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4815.852928] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4815.853608] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4815.857835] [Power/Alarm] alarm wait (0x0)
<5>[ 4815.878113] [Power/Alarm] alarm 3 set 15419.233000000
<5>[ 4815.926146] [Power/Alarm] alarm_timer_triggered type 3 at 15419.233005634 (1)
<5>[ 4815.927406] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4815.946121] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4815.946800] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4815.951359] [Power/Alarm] alarm wait (0x0)
<5>[ 4815.978861] [Power/Alarm] alarm 3 set 15419.334000000
<5>[ 4816.000240] [wlan] N=0 closed
<5>[ 4816.003657] [wlan] EVENT-ROAMING ABORT: Current Time = 4069480
<5>[ 4816.004392] [wlan] [13] TRANSITION: [0] -> [0]
<6>[ 4816.006976] [wlan] NAF=0,0,0
<6>[ 4816.007085] [wlan] NAF=0,0,0
<5>[ 4816.027147] [Power/Alarm] alarm_timer_triggered type 3 at 15419.334007711 (1)
<5>[ 4816.028419] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4816.029515] [BLOCK_TAG] mmcqd pid:45, timeline 4815945695769, duty 194096846, period 580415462, 33% I/O time occupied, rq_count=44
<5>[ 4816.031097] [BLOCK_TAG] mmcqd pid:45, WRITE size: 303104 bytes, delta time:141166694, throughput: 2148 kB/s
<5>[ 4816.032301] [BLOCK_TAG] mmcqd pid:45, READ size: 634880 bytes, delta time:52930152, throughput: 12001 kB/s
<5>[ 4816.056158] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4816.056837] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4816.063937] [Power/Alarm] alarm wait (0x0)
<5>[ 4816.088169] [Power/Alarm] alarm 3 set 15419.443000000
<5>[ 4816.136157] [Power/Alarm] alarm_timer_triggered type 3 at 15419.443011019 (1)
<5>[ 4816.162034] [wlan] [13] TRANSITION: [0] -> [2]
<5>[ 4816.181837] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4816.199784] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4816.200530] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4816.212734] [Power/Alarm] alarm wait (0x0)
<5>[ 4816.216160] [Power/Alarm] alarm 3 set 15419.571000000
<5>[ 4816.264158] [Power/Alarm] alarm_timer_triggered type 3 at 15419.571015788 (1)
<5>[ 4816.265512] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4816.290650] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4816.291329] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4816.295631] [Power/Alarm] alarm wait (0x0)
<5>[ 4816.336535] [Power/Alarm] alarm 3 set 15419.692000000
<5>[ 4816.354367] [wlan] [13] TRANSITION: [2] -> [0]
<6>[ 4816.355223] [wlan] NAF=0,0,0
<5>[ 4816.385153] [Power/Alarm] alarm_timer_triggered type 3 at 15419.692011403 (1)
<5>[ 4816.386432] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4816.413040] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4816.413719] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4816.417447] [Power/Alarm] alarm wait (0x0)
<5>[ 4816.428978] [Power/Alarm] alarm 3 set 15419.784000000
<5>[ 4816.477161] [Power/Alarm] alarm_timer_triggered type 3 at 15419.784015173 (1)
<5>[ 4816.478595] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4816.495655] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4816.496333] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4816.501169] [Power/Alarm] alarm 0 set 1366633732.138000000
<5>[ 4816.509082] [Power/Alarm] alarm wait (0x0)
<5>[ 4816.532007] [Power/Alarm] alarm 3 set 15419.887000000
<5>[ 4816.580151] [Power/Alarm] alarm_timer_triggered type 3 at 15419.887009327 (1)
<5>[ 4816.581489] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4816.582579] [BLOCK_TAG] mmcqd pid:45, timeline 4816495248461, duty 150960921, period 553064615, 27% I/O time occupied, rq_count=43
<5>[ 4816.584045] [BLOCK_TAG] mmcqd pid:45, WRITE size: 258048 bytes, delta time:112156535, throughput: 2301 kB/s
<5>[ 4816.585259] [BLOCK_TAG] mmcqd pid:45, READ size: 274432 bytes, delta time:38804386, throughput: 7072 kB/s
<5>[ 4816.603385] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4816.604069] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4816.607026] [Power/Alarm] alarm wait (0x0)
<5>[ 4816.659228] [Power/Alarm] alarm 3 set 15420.014000000
<5>[ 4816.707149] [Power/Alarm] alarm_timer_triggered type 3 at 15420.014008250 (1)
<5>[ 4816.708407] [Power/Alarm] alarm 3 set 15427.654000000
<5>[ 4816.728284] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4816.728963] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4816.750348] [Power/Alarm] alarm wait (0x0)
<5>[ 4816.892354] [Power/Alarm] alarm 3 set 15420.247000000
<5>[ 4816.940152] [Power/Alarm] alarm_timer_triggered type 3 at 15420.247009250 (1)
<7>[ 4816.949983] [3414:AsyncTask #2] fork err at pid
<5>[ 4816.977841] [Power/Alarm] alarm 3 set 15427.654000000
<4>[ 4817.013673] [dmesg]
<5>[ 4817.105363] [BLOCK_TAG] mmcqd pid:45, timeline 4817105337692, duty 448589922, period 522782385, 85% I/O time occupied, rq_count=35
<5>[ 4817.106830] [BLOCK_TAG] mmcqd pid:45, WRITE size: 147456 bytes, delta time:410137690, throughput: 359 kB/s
<5>[ 4817.108034] [BLOCK_TAG] mmcqd pid:45, READ size: 1056768 bytes, delta time:38452232, throughput: 27520 kB/s
<5>[ 4817.132559] [Power/Alarm] alarm 6 set 1366681920.000000000
<5>[ 4817.133245] [Power/RTC] set al time = 2013/04/23 01:52:00 (2)
<5>[ 4817.145786] [Power/Alarm] alarm wait (0x0)
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=PrestigioPAP4040DUO
ro.build.display.id=PAP4040DUO.20121101.V1.0.10
ro.build.version.incremental=eng..1351763875
ro.custom.build.version=1351763875
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Nov 1 17:59:04 CST 2012
ro.build.date.utc=1351763944
ro.build.type=user
ro.build.user=
ro.build.host=dell-desktop
ro.build.tags=release-keys
ro.product.model=PAP4040_DUO
ro.product.brand=Prestigio
ro.product.name=PAP4040DUO
ro.product.device=PAP4040DUO
ro.product.board=PAP4040DUO
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Prestigio
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=huaqin75_cu_ics
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=huaqin75_cu_ics-user PrestigioPAP4040DUO PAP4040DUO.20121101.V1.0.10 release-keys
ro.build.fingerprint=Prestigio/PAP4040DUO/PAP4040DUO:4.0.4/PrestigioPAP4040DUO/PAP4040DUO.20121101.V1.0.10:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
ro.adups.fota.oem=Prestigio
ro.adups.fota.device=PAP4040_DUO
ro.adups.fota.version=PAP4040DUO.20121101.V1.0.10
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=PAP4040DUO.20121101.V1.0.10
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
# begin huaqin build properties
ro.huaqin.version.release=PAP4040DUO.20121101.V1.0.10
# end huaqin build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=0
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=1
ro.audio.silent=0
#usb storage
ro.sys.usb.storage.type=mtp,mass_storage
sys.ipo.pwrdncap =3
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
sys.ipod_3rd_dur=5
ro.config.ringtone=CaribbeanIce.ogg
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
persist.sys.timezone=Africa/Casablanca
ro.config.general.vol.notice=7
ro.config.time.format=2
ro.ril.ecclist=060,112,911
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
debug.performance.tuning=1
video.accelerate.hw=1
wlan 285300 0 - Live 0xbf1e4000 (P)
cfg80211 122425 0 - Live 0xbf1bb000
mtk_fm_priv 8909 0 - Live 0xbf1b5000 (P)
mt6620_fm_drv 110874 1 mtk_fm_priv, Live 0xbf18d000
mtk_stp_bt 39718 0 - Live 0xbf180000
mtk_stp_gps 37190 0 - Live 0xbf173000
mtk_stp_uart 21669 0 - Live 0xbf16a000 (P)
mtk_stp_wmt 343726 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf109000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf100000
devinfo 748 0 - Live 0xbf0fc000 (P)
sec 109563 0 - Live 0xbf0db000 (P)
mt6575_vcodec_kernel_driver 23817 0 - Live 0xbf0d0000 (P)
mt6575_m4u 108821 8 - Live 0xbf0ac000 (P)
ccmni 17214 0 - Live 0xbf0a3000 (P)
ccci 140352 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125068 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163655 77 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 0 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.631 GB actual); 16 GB (14.837 GB actual)
mmcblk0: 3.631 GB
mmcblk1: 14.837 GB
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |