1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | Sony Ericsson |
Model | LT28h |
Firmware | 4.0.4; 6_t-zw; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 4 (v7l) msm8660; Max: 1512,0 MHz; Min: 192,0 MHz |
Display | 1280 x 720; DPI: 320; Evaluated Size: 4,6" |
Touch screen | Multitouch 10 Point(s) |
GPU | Adreno (TM) 220; Qualcomm; OpenGL ES-CM 1.1; OpenGL ES 2.0 2184622 |
RAM | 671 MB |
Flash | 16 GB Build-in (14.561 GB actual); 8 GB (7.402 GB actual) |
Communications | |
Phone | GSM |
Mobile Networks | EDGE HSPA; |
WiFi | bcm4330; IEEE 802.11 a/b/g/n; Broadcom 4330; AP Mode |
USB Host | Yes |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Advanced Features | |
Front camera | Photo: 12.0 MP; Max: 4000x3000; Video: 2.1 MP; Max: 1920x1080; Focus: auto infinity macro fixed continuous-picture continuous-video; Flash modes: off auto on red-eye torch |
Back camera | Photo: 1.2 MP; Max size: 1280x960; Video: 0.9 MP; Max: 1280x720; Focus: fixed; No flash |
Sensors | BMA250 accelerometer (Bosch Sensortec GmbH); range: 0...156,96; resolution: 20 (12,742%); power: 0,003mA; |
AK8972 Magnetic Field (Asahi Kasei Corp.); range: 0...4900; resolution: 60 (1,224%); power: 0,4mA; | |
APDS9702 Proximity (Sony Ericsson); range: 0...1; resolution: 1 (100%); power: 20mA; | |
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,903mA; | |
Linear Acceleration Sensor (Google Inc.); range: 0...19,613; resolution: 20 (101,972%); power: 0,903mA; | |
Gravity Sensor (Google Inc.); range: 0...19,613; resolution: 20 (101,972%); power: 0,903mA; | |
Corrected Gyroscope Sensor (Google Inc.); range: 0...10240; resolution: 1 (0,01%); power: 0,903mA; | |
Vibrator | Yes |
Supported languages | 49; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Estonian; Basque; Persian; Finnish; Filipino; French; Galician; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Icelandic; Italian; Japanese; Kazakh; Korean; Lithuanian; Latvian; Macedonian; Malay; Norwegian; Dutch; Norwegian; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Albanian; Serbian; Swedish; Thai; Tagalog; Turkish; Ukrainian; Vietnamese; Chinese |
Battery | Type: Li-poly; Voltage: 4.2 |
FM radio | 76MHz to 108MHz |
Alternative Complectations | |
Flash | 14.832 GB |
KERNEL: Linux version 3.0.8+1.0.21100-30145-01962-g90d4b42 (BuildUser@BuildHost) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed May 23 14:00:12 2012
CODENAME: REL
Mainboard: MSM8660_SURF
BRAND: SEMC
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: LT28h
DISPLAY: 6.1.E.1.20
FINGERPRINT: SEMC/LT28h_1269-2124/LT28h:4.0.4/6.1.E.1.20/6_t-zw:user/release-keys
HARDWARE: semc
ID: 6.1.E.1.20
TAGS: release-keys
Processor : ARMv7 Processor rev 4 (v7l)
processor : 0
BogoMIPS : 13.52
processor : 1
BogoMIPS : 13.52
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls
CPU implementer : 0x51
CPU architecture: 7
CPU variant : 0x0
CPU part : 0x02d
CPU revision : 4
Hardware : fuji
Revision : 0000
Serial : 0000000000000000
GL_AMD_compressed_ATC_texture
GL_AMD_performance_monitor
GL_AMD_program_binary_Z400
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_type_2_10_10_10_REV
GL_NV_fence
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_depth_texture
GL_OES_depth24
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_element_index_uint
GL_OES_fbo_render_mipmap
GL_OES_fragment_precision_high
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_rgb8_rgba8
GL_OES_standard_derivatives
GL_OES_texture_3D
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_texture_half_float_linear
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_vertex_type_10_10_10_2
GL_OES_vertex_array_object
GL_QCOM_alpha_test
GL_QCOM_binning_control
GL_QCOM_driver_control
GL_QCOM_perfmon_global_mode
GL_QCOM_extended_get
GL_QCOM_extended_get2
GL_QCOM_tiled_rendering
GL_QCOM_writeonly_rendering
GL_AMD_compressed_3DC_texture
<4>[ 1367.129821]
<4>[ 1367.129852] Dongle Host Driver, version 5.90.125.129
<4>[ 1367.129852] Compiled in /home/hudsonslave/root/workspace/offbuild_edream6.1-fuji-r2-caf-plus-release_matrix/HUDSON_PRODUCT/aoba/HUDSON_VARIANT/user/label/CM/out/target/product/aoba/obj/BCM4330_DRV/dhd/linux/../.. on Aug 15 2012 at 13:23:08
<4>[ 1367.130065] sdio_reset_comm():
<4>[ 1367.156097] F1 signature read @0x18000000=0x16044330
<4>[ 1367.160034] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 1367.214752] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 1367.384674] Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=20:54:76:70:a7:42
<4>[ 1367.463958] wl_host_event: Invalid ifidx 0 for wl0
<4>[ 1367.464965] Firmware version = wl0: Mar 22 2012 06:18:41 version 5.90.125.129
<4>[ 1367.466918] wl_host_event: Invalid ifidx 0 for wl0
<3>[ 1367.724914] WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for US as US rev -1
<6>[ 1367.973754] msm_sdio_dmux_open: Already opened 0
<6>[ 1367.974151] msm_sdio_dmux_open: opened ch 0
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Wed May 23 14:00:12 2012
ro.build.date.utc=1337752812
ro.build.user=BuildUser
ro.build.host=BuildHost
##### Final patch of properties #####
ro.build.product=LT28h
ro.build.description=LT28h-user 4.0.4 6.1.E.1.20 6_t-zw test-keys
ro.product.brand=SEMC
ro.product.name=LT28h_1269-2124
ro.product.device=LT28h
ro.build.tags=release-keys
ro.build.fingerprint=SEMC/LT28h_1269-2124/LT28h:4.0.4/6.1.E.1.20/6_t-zw:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1269-2124
ro.semc.version.cust_revision=R3G
ro.semc.enable.fast_dormancy=false
ro.semc.ecclist.num=1
ro.semc.ecclist.type.0=police
ro.semc.ecclist.number.0=000
ro.semc.ecclist.plmn.0=505 FFF
ro.telephony.no_emg_calls_only=false
ro.nfc.se.sim.enable=true
ro.nfc.se.smx.enable=true
#########################################################################
ro.config.ringtone=xperia.ogg
ro.config.notification_sound=notification.ogg
ro.config.alarm_alert=alarm.ogg
ro.semc.content.number=PA3
################# Updating of the SW Version #################
ro.semc.version.fs_revision=6.1.E.1.20
ro.build.id=6.1.E.1.20
ro.build.display.id=6.1.E.1.20
##### Values from product package metadata #####
ro.semc.product.model=LT28h
ro.semc.ms_type_id=PM-0200-BV
ro.semc.version.fs=WORLD
ro.semc.product.name=Xperia ion
ro.semc.product.device=LT28
ro.product.model=LT28h
# begin build properties
# autogenerated by buildinfo.sh
ro.build.version.incremental=6_t-zw
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.type=user
ro.product.board=MSM8660_SURF
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=nosdcard
# end build properties
#
# system.prop for surf
#
# Notify the system that the RIL only signals once
ro.telephony.call_ring.multiple=false
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=dyn
ro.sf.compbypass.enable=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.be.ge.sqi.min=0
persist.cne.be.ge.sqi.max=100
persist.cne.be.umts.sqi.min=0
persist.cne.be.umts.sqi.max=100
persist.cne.be.hspa.sqi.min=0
persist.cne.be.hspa.sqi.max=100
persist.cne.be.1x.sqi.min=0
persist.cne.be.1x.sqi.max=100
persist.cne.be.do.sqi.min=0
persist.cne.be.do.sqi.max=100
persist.cne.be.wlan.sqi.min=0
persist.cne.be.wlan.sqi.max=100
ro.hdmi.enable=true
lpa.decode=false
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=11
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.hp=true
# System prop to select audio resampler quality
af.resampler.quality=3
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
# NFC
ro.nfc.on.default=false
ro.nfc.icon.enable=true
ro.nfc.vendor.name=nxp
# System props for SOLS
ro.semc.sols.product-code=101
ro.semc.sols.company-code=5
# system props for Battery test in Service menu
ro.semc.batt.capacity=1500
ro.semc.batt.test.z_threshold=50
ro.semc.batt.test.min_level=70
# prop to indicate what kind of external memory the product have.
ro.semc.product.user_storage=emmc_sdcard
ro.build.characteristics=default
# hwui
ro.hwui.text_cache_width=2048
# Properties controlling Qcom performance patches
net.webkit.setpri=1
net.webkit.cache.mindeadsize=4194304
net.webkit.cache.maxdeadsize=4194304
net.webkit.cache.size=12582912
net.dns.cache_size=512
net.dns.cache_ttl=600
net.early.sockets=0
stathub.pp.prfth=30
net.tcp.fin.aggregation=1
net.dnshostprio.enable=1
net.http.threads=10
net.http.idle_cache.size=40
net.http.idle_cache.shutdown=true
net.nw.cache.prioadvstep=86400000
net.nw.cache.weightadvstep=3600000
net.nw.cache.orderby=weight
stathub.enabled=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.com.android.dataroaming=false
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r2
ro.com.google.clientidbase=android-sonyericsson
ro.sf.lcd_density=320
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.semc.xloud.supported=true
ro.usb.pid_suffix=177
ro.semc.xloud.default_setting=false
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
ro.drm.active.num=4
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
bcm4330 338812 0 - Live 0xbf000000
RAM: 671 MB
System RAM: 44.000MB
System RAM: 627.000MB
Flash: 16 GB Build-in (14.561 GB actual); 8 GB (7.402 GB actual)
mmcblk0: 14.561 GB
mmcblk1: 7.402 GB
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |