1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications | |
---|---|
Manufacturer | sanei |
Model | N10 |
Firmware | 4.0.4; 4.0.2487; SDK15 |
CPU | 1 core; ARMv7 Processor rev 2 (v7l) exDroid; Max: 1008,0 MHz; Min: 60,0 MHz |
Display | 1280 x 800; DPI: 160; Evaluated Size: 9,4" |
Touch screen | Multitouch 10 Point(s) |
GPU | Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0 |
RAM | 1024 MB (960 MB available) |
Flash | 16 GB Build-in (14.843 GB actual); 1 GB (0.949 GB actual) |
Communications | |
Phone | |
Mobile Networks | |
WiFi | 8192cu; IEEE 802.11 b/g/n; RealtekRTL8188/92; AP Mode |
USB Host | Yes |
Bluetooth | no |
GPS | No |
Advanced Features | |
Front camera | Fail to connect to camera service |
Back camera | No |
Sensors | MC32X0 3-axis Accelerometer (MCUBE); range: 0...29,43; resolution: 0,115 (0,391%); power: 0,2mA; |
Rotation Vector Sensor 2 (CyanogenMod Project); range: 0...1; resolution: 0 (0%); power: 1,05mA; | |
Vibrator | Yes |
Supported languages | 40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese |
Battery | Type: LiFe; Voltage: 4.2 |
External USB Ethernet | Realtek 8150 based adapters; MCS7830 based adapters |
Alternative Complectations | |
RAM | 627 MB |
Flash | 3.688 GB |
Cores | 2 |
KERNEL: Linux version 3.0.8+ (build@emma9) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #2 PREEMPT Mon Nov 12 15:04:17 CST 2012
CODENAME: REL
Mainboard: crane
BRAND: softwinners
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: crane-anpei101w2
DISPLAY: crane_anpei101w2sy-user-r4.0.4.4.0.2487
FINGERPRINT: softwinners/crane_anpei101w2sy/crane-anpei101w2:4.0.4/IMM76D/4.0.2487:user/test-keys
HARDWARE: sun4i
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 07c184a648484848807578491623678a
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
<7>[26402.748316] sw_usb_enable_hcd: usbc_num = 2
<7>[26402.752973] [sw-ehci2]: sw_usb_enable_ehci
<7>[26402.752992] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc08822a0
<7>[26402.753009] [sw-ehci2]: open clock
<7>[26402.795590] [sw-ehci2]: Set USB Power ON
<6>[26402.795613] sw-ehci sw-ehci.2: SW USB2.0 `Enhanced` Host Controller (EHCI) Driver
<6>[26402.795650] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
<6>[26402.795760] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>[26402.829444] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<7>[26402.834969] ehci_irq: port change detect
<6>[26402.844632] hub 4-0:1.0: USB hub found
<6>[26402.848641] hub 4-0:1.0: 1 port detected
<7>[26402.854639] [sw-ohci2]: sw_usb_enable_ohci
<7>[26402.858795] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc08823b4
<7>[26402.868636] [sw-ohci2]: open clock
<6>[26402.897085] sw-ohci sw-ohci.2: SW USB2.0 `Open` Host Controller (OHCI) Driver
<6>[26402.897131] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
<6>[26402.897188] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
<6>[26402.962657] hub 5-0:1.0: USB hub found
<6>[26402.966527] hub 5-0:1.0: 1 port detected
<7>[26402.973227] rtw driver version=v3.4.2_3727.20120404
<7>[26402.973237] Build at: Nov 12 2012 14:29:02
<7>[26402.973247] ##########rtw_suspend_lock_init ###########
<6>[26402.974243] usbcore: registered new interface driver rtl8192cu
<6>[26403.170082] usb 4-1: new high speed USB device number 2 using sw-ehci
<7>[26403.334617] register rtw_netdev_ops to netdev_ops
<7>[26403.334631] rtw_wdev_alloc
<7>[26403.334913] CHIP TYPE: RTL8188C_8192C
<7>[26403.334926]
<7>[26403.334929] usb_endpoint_descriptor(0):
<7>[26403.334935] bLength=7
<7>[26403.334940] bDescriptorType=5
<7>[26403.334945] bEndpointAddress=81
<7>[26403.334950] wMaxPacketSize=200
<7>[26403.334955] bInterval=0
<7>[26403.334961] RT_usb_endpoint_is_bulk_in = 1
<7>[26403.334967]
<7>[26403.334970] usb_endpoint_descriptor(1):
<7>[26403.378468] bLength=7
<7>[26403.378477] bDescriptorType=5
<7>[26403.378482] bEndpointAddress=2
<7>[26403.378487] wMaxPacketSize=200
<7>[26403.378499] bInterval=0
<7>[26403.378504] RT_usb_endpoint_is_bulk_out = 2
<7>[26403.378511]
<7>[26403.378514] usb_endpoint_descriptor(2):
<7>[26403.378520] bLength=7
<7>[26403.378524] bDescriptorType=5
<7>[26403.378529] bEndpointAddress=3
<7>[26403.378534] wMaxPacketSize=200
<7>[26403.378539] bInterval=0
<7>[26403.378561] RT_usb_endpoint_is_bulk_out = 3
<7>[26403.378567]
<7>[26403.378570] usb_endpoint_descriptor(3):
<7>[26403.378575] bLength=7
<7>[26403.378580] bDescriptorType=5
<7>[26403.378585] bEndpointAddress=84
<7>[26403.378590] wMaxPacketSize=40
<7>[26403.378595] bInterval=1
<7>[26403.378600] RT_usb_endpoint_is_int_in = 4, Interval = 1
<7>[26403.378614] nr_endpoint=4, in_num=2, out_num=2
<7>[26403.378619]
<7>[26403.378623] USB_SPEED_HIGH
<7>[26403.381303] Chip Version ID: VERSION_NORMAL_UMC_CHIP_88C_B_CUT.
<7>[26403.381316] RF_Type is 3!!
<7>[26403.381808] EEPROM type is E-FUSE
<7>[26403.381817] ====> ReadAdapterInfo8192C
<7>[26403.381949] Boot from EFUSE, Autoload OK !
<7>[26403.646097] EEPROMVID = 0x0bda
<7>[26403.646108] EEPROMPID = 0x8176
<7>[26403.646114] EEPROMCustomerID : 0x00
<7>[26403.646119] EEPROMSubCustomerID: 0x00
<7>[26403.646124] RT_CustomerID: 0x00
<7>[26403.646135] _ReadMACAddress MAC Address from EFUSE = 00:c3:f8:12:0e:7e
<7>[26403.646146] EEPROMRegulatory = 0x0
<7>[26403.646152] _ReadBoardType(0)
<7>[26403.646158] BT Coexistance = disable
<7>[26403.646164] RT_ChannelPlan: 0x0a
<7>[26403.646172] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
<7>[26403.646181] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<7>[26403.646188] ### AntDivCfg(0)
<7>[26403.646194] readAdapterInfo_8192CU(): REPLACEMENT = 1
<7>[26403.646202] <==== ReadAdapterInfo8192C in 260 ms
<7>[26403.647582] rtw_register_early_suspend
<7>[26403.647733]
<7>[26403.647737] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
<7>[26403.647745]
<7>[26403.647748] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
<7>[26403.647776] rtw_macaddr_cfg MAC Address = 00:c3:f8:12:0e:7e
<7>[26403.647786] MAC Address from pnetdev->dev_addr= 00:c3:f8:12:0e:7e
<7>[26403.802794] rtw_android_priv_cmd: Android private cmd "BLOCK 1" on wlan0
<5>[26403.803445] init: starting `wpa_supplicant`
<7>[26403.804298] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<6>[26403.812028] init: Created socket `/dev/socket/wpa_wlan0` with mode `660`, user `1010`, group `1010`
<7>[26403.871420] cfg80211_rtw_change_iface call netdev_open
<7>[26403.871435] +871x_drv - drv_open, bup=0
<7>[26403.925061] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_UMC_B
<7>[26403.965642] FirmwareDownload92C accquire FW from embedded image
<7>[26403.965660] fw_ver=v80, fw_subver=0, sig=0x88c0
<7>[26404.035464] fw download ok!
<7>[26404.039539] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<7>[26404.456806] IQK:Start!!!
<7>[26404.474191] Path A IQK Success!!
<7>[26404.485559] Path A IQK Success!!
<7>[26404.493559] IQK: final_candidate is 0
<7>[26404.497252] IQK: RegE94=102 RegE9C=11 RegEA4=fd RegEAC=1 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
<7>[26404.497259] Path A IQ Calibration Success !
<7>[26404.669956] pdmpriv->TxPowerTrackControl = 1
<7>[26404.687201] MAC Address from REG_MACID = 00:c3:f8:12:0e:7e
<7>[26404.687214] rtl8192cu_hal_init in 810ms
<7>[26404.687223] MAC Address = 00:c3:f8:12:0e:7e
<7>[26404.715632] rtw_cfg80211_init_wiphy:rf_type=3
<7>[26404.720113] -871x_drv - drv_open, bup=1
<7>[26404.724321] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<7>[26404.724619] +871x_drv - drv_open, bup=1
<7>[26404.724628] -871x_drv - drv_open, bup=1
<7>[26404.726689] cfg80211_rtw_set_power_mgmt
<6>[26404.727822] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[26404.735710] cfg80211_rtw_flush_pmksa
<7>[26404.778138] cfg80211_rtw_change_station
<7>[26404.783421] cfg80211_rtw_change_station
<7>[26404.783502] cfg80211_rtw_change_station
<7>[26404.783740] rtw_android_priv_cmd: Android private cmd "P2P_DEV_ADDR" on wlan0
<6>[26405.506890] init: waitpid returned pid 19504, status = 00000000
<3>[26405.506910] init: untracked pid 19504 exited
<7>[26405.784709] cfg80211_rtw_change_station
<7>[26405.922445] rtw_android_priv_cmd: Android private cmd "BLOCK 0" on wlan0
<7>[26405.953788] rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<7>[26405.968042] rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<7>[26405.968785] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<7>[26405.969358] rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<7>[26405.969531] rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<7>[26405.969828] rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<7>[26405.972566] rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<7>[26405.973644] rtw_android_priv_cmd: Android private cmd "SCAN-ACTIVE" on wlan0
<7>[26405.974029] rtw_android_priv_cmd: Android private cmd "SCAN-PASSIVE" on wlan0
<7>[26406.145460] survey done event(11)
<7>[26406.152529]
<7>[26406.152538] =>cfg80211_rtw_connect
<7>[26406.157430] privacy=1, key= (null), key_len=0, key_idx=0
<7>[26406.167971] ssid=kerat, len=5
<7>[26406.171054] bssid=00:1f:1f:34:4f:a0
<7>[26406.174580] matched by bssid
<7>[26406.177852] rtw_cfg80211_set_wpa_version, wpa_version=2
<7>[26406.177861] rtw_cfg80211_set_auth_type, nl80211_auth_type=0
<7>[26406.177870] rtw_cfg80211_set_cipher, ucast=1, cipher=0xfac04
<7>[26406.177879] rtw_cfg80211_set_cipher, ucast=0, cipher=0xfac04
<7>[26406.177887] rtw_cfg80211_set_key_mgt, key_mgt=0xfac02
<7>[26406.177894] cfg80211_rtw_connect, ie_len=22
<7>[26406.177906] set wpa_ie(length:22):
<7>[26406.177914] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
<7>[26406.177923] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
<7>[26406.177932] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
<7>[26406.177943] got wpa2_ie
<7>[26406.177978] Set SSID under fw_state=0x00000008
<7>[26406.177995] [by_bssid:0][assoc_ssid:kerat][to_roaming:0] new candidate: kerat(00:1f:1f:34:4f:a0) rssi:-58
<7>[26406.178008] rtw_select_and_join_from_scanned_queue: candidate: kerat(00:1f:1f:34:4f:a0)
<7>[26406.178031] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
<7>[26406.178045] link to Ralink AP
<7>[26406.178103] set ssid:dot11AuthAlgrthm=2, dot11PrivacyAlgrthm=4, dot118021XGrpPrivacy=4
<7>[26406.178115] <=cfg80211_rtw_connect, ret 0
<7>[26406.276216] set ch/bw before connected
<7>[26406.283502] cfg80211_rtw_change_station
<7>[26406.283770] cfg80211_rtw_change_station
<7>[26406.283895] cfg80211_rtw_change_station
<7>[26406.406024] link to Ralink AP
<7>[26406.409019] issue_deauth to 00:1f:1f:34:4f:a0
<7>[26406.420304] OnAuthClient
<7>[26406.422889] network.SupportedRates[0]=82
<7>[26406.426809] network.SupportedRates[1]=84
<7>[26406.430774] network.SupportedRates[2]=8B
<7>[26406.434693] network.SupportedRates[3]=96
<7>[26406.438618] network.SupportedRates[4]=12
<7>[26406.442557] network.SupportedRates[5]=24
<7>[26406.446475] network.SupportedRates[6]=48
<7>[26406.450412] network.SupportedRates[7]=6C
<7>[26406.454330] network.SupportedRates[8]=0C
<7>[26406.458252] network.SupportedRates[9]=18
<7>[26406.462186] network.SupportedRates[10]=30
<7>[26406.466192] network.SupportedRates[11]=60
<7>[26406.470214] bssrate_len = 12
<7>[26406.481153] OnAssocRsp
<7>[26406.483580] report_join_res(2)
<7>[26406.486642] rtw_joinbss_update_network
<7>[26406.490429] +rtw_update_ht_cap()
<7>[26406.491053] rtw_joinbss_update_stainfo
<7>[26406.491053] rtw_cfg80211_indicate_connect
<7>[26406.501544] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
<6>[26406.507035] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>[26406.516782] WMM(0): 0, a42b
<7>[26406.517267] WMM(1): 0, a44f
<7>[26406.517613] WMM(2): 0, 604322
<7>[26406.517958] WMM(3): 0, 303222
<7>[26406.518108] [HW_VAR_ACM_CTRL] Write 0x0
<7>[26406.518338] HTOnAssocRsp
<7>[26406.522728] cfg80211_rtw_change_station
<7>[26406.522826] cfg80211_rtw_change_station
<7>[26406.522892] cfg80211_rtw_change_station
<7>[26406.529280] update raid entry, mask=0xfffff, arg=0x80
<7>[26406.530954] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
<7>[26406.531827] SetFwRsvdPagePkt
<7>[26406.531872] Set RSVD page location to Fw.
<7>[26406.532947] =>mlmeext_joinbss_event_callback
<7>[26406.753700] cfg80211_rtw_add_key, Adding key for 00:1f:1f:34:4f:a0
<7>[26406.764006] cipher=0xfac04
<7>[26406.766798] key_len=0x10
<7>[26406.769364] seq_len=0x6
<7>[26406.772031] key_index=0
<7>[26406.774922] pairwise=1
<7>[26406.774935] rtw_cfg80211_set_encryption
<7>[26406.774945] rtw_cfg80211_set_encryption, : param->u.crypt.set_tx ==1
<7>[26406.774953]
<7>[26406.774955] ~~~~stastakey:unicastkey
<7>[26406.775014] rtw_cfg80211_set_encryption, ret=0
<7>[26406.775232] cfg80211_rtw_set_default_key
<7>[26406.776016] cfg80211_rtw_add_key, Adding key for (null)
<7>[26406.776027] cipher=0xfac04
<7>[26406.776033] key_len=0x10
<7>[26406.776037] seq_len=0x6
<7>[26406.776042] key_index=1
<7>[26406.776047] pairwise=0
<7>[26406.776095] rtw_cfg80211_set_encryption
<7>[26406.776105]
<7>[26406.776108] ~~~~stastakey:groupkey
<7>[26406.776117] ==> rtw_set_key algorithm(4),keyid(1),key_mask(2)
<7>[26406.776128] rtw_cfg80211_set_encryption, ret=0
<7>[26406.780337] cfg80211_rtw_change_station
<7>[26409.720914] rtw_android_priv_cmd: Android private cmd "BTCOEXMODE 1" on wlan0
<7>[26409.778902] cfg80211_rtw_set_power_mgmt
<5>[26409.806787] init: starting `dhcpcd_wlan0`
<7>[26410.024336] OnAction_back
<7>[26410.026999] OnAction_back, action=0
<7>[26410.030539] issue_action_BA, category=3, action=1, status=0
<7>[26410.353725] OnAction_back
<7>[26410.353741] OnAction_back, action=0
<7>[26410.353751] issue_action_BA, category=3, action=1, status=0
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=crane_anpei101w2sy-user-r4.0.4.4.0.2487
ro.build.version.incremental=4.0.2487
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Mon Nov 12 14:26:29 CST 2012
ro.build.date.utc=1352701589
ro.build.type=user
ro.build.user=build
ro.build.host=emma9
ro.build.tags=test-keys
ro.product.model=N10
ro.product.brand=softwinners
ro.product.name=crane_anpei101w2sy
ro.product.device=crane-anpei101w2
ro.product.board=crane
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crane-anpei101w2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=crane_anpei101w2sy-user 4.0.4 IMM76D 4.0.2487 test-keys
ro.build.fingerprint=softwinners/crane_anpei101w2sy/crane-anpei101w2:4.0.4/IMM76D/4.0.2487:user/test-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.mode=DISABLED
persist.sys.usb.config=mass_storage,adb
persist.service.adb.enable=1
ro.sf.lcd_density=160
ro.udisk.lable=SANEI
ro.product.firmware=4.0.14
persist.sys.themeId=LightGray
persist.sys.themePackageName=com.letou.theme.lightgray
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.kernel.android.checkjni=0
persist.sys.timezone=Asia/Shanghai
persist.sys.language=zh
persist.sys.country=CN
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
ro.tether.denied=false
hwui.render_dirty_regions=false
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
8192cu 575431 0 - Live 0xbf1ec000
rtl8150 8910 0 - Live 0xbf0b2000
mcs7830 6557 0 - Live 0xbf0ac000
qf9700 8513 0 - Live 0xbf0a5000
asix 22500 0 - Live 0xbf09a000
usbnet 23745 3 mcs7830,qf9700,asix, Live 0xbf08e000
sun4i_csi0 27946 0 - Live 0xbf083000
gc0308b 14280 0 - Live 0xbf07b000
gc0308 14208 1 - Live 0xbf073000
videobuf_dma_contig 5659 1 sun4i_csi0, Live 0xbf06e000
videobuf_core 18067 2 sun4i_csi0,videobuf_dma_contig, Live 0xbf064000
sun4i_vibrator 2278 0 - Live 0xbf060000
mma7660 5978 0 - Live 0xbf05a000
dmard06 8746 0 - Live 0xbf053000
bma250 7081 0 - Live 0xbf04d000
mali 130385 12 - Live 0xbf020000
ump 42346 15 mali, Live 0xbf00f000
ft5x_ts_anpei101 41817 0 - Live 0xbf000000
RAM: 1024 MB (960 MB available)
System RAM: 448.000MB
Mali Sdram: 64.000MB
System RAM: 512.000MB
Flash: 16 GB Build-in (14.843 GB actual); 1 GB (0.949 GB actual)
mmcblk0: 0.949 GB
nand: 14.843 GB
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |