一般规格 | |
---|---|
生产厂家 | TCT |
型号 | ALCATEL ONE TOUCH 992D |
Android版 | 4.0.4; vD5Y-0; SDK15 |
中央处理单元 | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
显示 | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
触摸屏 | Multitouch 2 points |
图形处理器 | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
内存RAM | 512 MB (486 MB available) |
快闪记忆体 | 4 GB (3.566 GB actual); 32 GB (29.499 GB actual) (见存储器映射选项卡) |
沟通 | |
电话 | GSM, Dual SIM; Net: HSPA |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB主机 | No |
蓝牙 | Bluetooth 4.0+HS |
全球定位系统 | No |
高级功能 | |
前置摄像头 | Photo: 4.9 MP; Max: 2560x1920; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
背照相机 | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
传感器 | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
stk31xx/cm3623 Proximity Sensor (Sitronix/Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
stk31xx/cm3623 Light Sensor (Sitronix/Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
震动模式 | Yes |
支持的语言 | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
电池 | Technology: Li-ion; Voltage: 3889 |
FM radio | 76 to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (android-bld@aclgcl-ubnt162) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Oct 24 19:17:28 CST 2012
CODENAME: REL
Mainboard: Martell_lite
BRAND: TCT
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: Martell_lite_GSM
DISPLAY: SLPA.ICS
FINGERPRINT: TCT/Martell_lite/Martell_lite_GSM:4.0.4/IMM76D/vD5Y-0:user/release-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: release-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1993.93
processor : 1
BogoMIPS : 2000.48
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[36082.574417] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10931230 > 8ms
<7>[36082.574454] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.606886] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12012308 > 8ms
<7>[36082.606918] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.643274] (0)[28809:dmesg] exit
<7>[36082.643598] (0)[28809:dmesg] sig 17 to [28807:AsyncTask #2]
<7>[36082.688046] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 10902462 > 8ms
<7>[36082.688084] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.720487] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 10862846 > 8ms
<7>[36082.720557] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.736699] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 11225692 > 8ms
<7>[36082.736737] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.801666] (1)[310:WifiStateMachin] fork [28810:WifiStateMachin]
<7>[36082.801721] (0)[28810:WifiStateMachin] set proc[28810] name: ->[loadDriverThrea]
<7>[36082.801746] (1)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 12576769 > 8ms
<7>[36082.801777] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.894908] (1)[260:er.ServerThread] fork [28811:er.ServerThread]
<7>[36082.895089] (0)[28811:er.ServerThread] set proc[28811] name: ->[Thread-1967]
<6>[36082.909560] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[36082.909572] (0)[WLAN] Power on
<3>[36082.909586] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[36082.909604] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[36082.909641] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[36082.909654] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO112)
<3>[36082.909665] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO124)
<3>[36082.909674] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[36082.909685] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[36082.909695] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[36082.909705] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[36082.909716] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[36082.909726] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[36082.909736] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[36082.909746] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[36082.909757] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[36082.909767] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[36082.909776] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[36082.909787] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[36082.909797] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_CK(GPIO56)
<3>[36082.909807] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_WS(GPIO57)
<3>[36082.909817] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:I2S_DAT(GPIO58)
<3>[36082.909827] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[36082.909837] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO122)
<3>[36082.909846] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[36082.909858] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[36082.909878] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[36082.915203] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 23640693 > 8ms
<7>[36082.915234] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.931710] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 13177000 > 8ms
<7>[36082.932602] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.963918] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11810462 > 8ms
<7>[36082.963950] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36082.969670] (0)[28811:Thread-1967] exit
<7>[36082.996371] (0)WQ_WARN: cpu:4, proc:kworker/u:0, dur: 11457462 > 8ms
<7>[36082.996404] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36083.012653] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 11641000 > 8ms
<7>[36083.012688] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36083.028859] (1)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 10710539 > 8ms
<7>[36083.028900] (1)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36083.045082] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 11498385 > 8ms
<7>[36083.045113] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36083.061330] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 11109616 > 8ms
<7>[36083.061362] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36083.079130] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 13145154 > 8ms
<7>[36083.079168] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<7>[36083.110038] (0)WQ_WARN: cpu:4, proc:kworker/u:2, dur: 26624000 > 8ms
<7>[36083.110072] (0)work: WorkQueueHandler+0x0/0x18 [mtklfb]
<3>[36083.113097] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[36083.113122] (1)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[36083.113302] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[36083.113315] (1)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[36083.113326] (1)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[36083.113337] (1)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<7>[36083.118222] (0)[28799:Thread-627] exit
<4>[36083.164427] (1)mtk_get_bus_freq() return 260000
<3>[36083.164615] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[36083.164627] (1)Flush type = 4 Rx Queue
<3>[36083.164770] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[36083.164786] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[36083.164799] (1)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[36083.164809] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[36083.164821] (1)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[36083.164835] (1)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[36083.164846] (1)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[36083.164857] (1)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[36083.164868] (1)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[36083.170392] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[36083.175924] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<7>[36083.180523] (1)[28804:Thread-629] exit
<3>[36083.182136] (0)[WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[36083.182154] (0)[WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[36083.182169] (0)[WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[36083.182183] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[36083.194906] (1)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[36083.194928] (1)[WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[36083.196812] (1)[WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[36083.204495] (1)[WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[36083.204514] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120813155255
<3>[36083.204526] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[36083.204536] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[36083.204547] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x0014
<3>[36083.204558] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1222
<3>[36083.204568] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content Size = 0xa22c
<3>[36083.205038] (1)[WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Content CRC = 0x0389
<3>[36083.205050] (1)[WMT-IC][I]mt6620_patch_dwn:===========================================
<7>[36083.223178] (0)WQ_WARN: cpu:0, proc:kworker/0:3, dur: 309753615 > 8ms
<7>[36083.223201] (0)work: thermal_zone_device_check+0x0/0x18
<3>[36083.519108] (0)[WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(42, 516) ok
<3>[36083.519184] (0)[WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[36083.519645] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf145f48)
<3>[36083.524340] (0)[WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[36083.524824] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[36083.524850] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[36083.524874] (0)[STP] mtk_wcn_stp_assert:[I] set f/w assert (0)
<3>[36083.524893] (0)[WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[36083.545561] (0)[WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[36083.545613] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[36083.545659] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[36083.545699] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[36083.545732] (0)board_sdio_ctrl force off before on
<6>[36083.545761] (0)mtk_wcn_cmb_sdio_off (3)
<6>[36083.546017] (0)mtk_wcn_cmb_sdio_on (3)
<3>[36083.546175] (0)msdc3 -> USR Resume <- msdc_pm() : L<1674> PID
<3>[36083.563332] (1)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID
<3>[36083.563405] (1)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<946> PID
<3>[36083.563467] (1)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID
<3>[36083.589179] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1742> PID
<3>[36083.614694] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4054> PID
<3>[36083.614779] (0)msdc3 -> ================ <- msdc_set_mclk() : L<944> PID
<3>[36083.614845] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<946> PID
<3>[36083.614907] (0)msdc3 -> ================ <- msdc_set_mclk() : L<947> PID
<6>[36083.617509] (0)mmc2: new high speed SDIO card at address 0001
<6>[36083.622489] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[36083.622534] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[36083.622575] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[36083.622615] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[36083.622649] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[36083.623306] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[36083.623394] (0)WQ_WARN: cpu:4, proc:kworker/u:3, dur: 73617231 > 8ms
<7>[36083.623449] (0)work: mmc_rescan+0x0/0x324
<6>[36083.703677] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[36083.704059] (1)[2:kthreadd] fork [28812:kthreadd]
<6>[36083.704211] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<4>[36083.704276] (1)[RT_MONITOR]WARNNING [28812:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [28812:ksdioirqd/mmc2]
<4>[36084.323190] (0)[lcm_esd_check], vcom is 0,4c-----------------------------------------
<7>[36084.533310] (0)WQ_WARN: cpu:0, proc:kworker/0:3, dur: 310157923 > 8ms
<7>[36084.533377] (0)work: thermal_zone_device_check+0x0/0x18
<7>[36084.805748] (1)[2:kthreadd] fork [28813:kthreadd]
<6>[36084.809728] (1)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[36084.809743] (1)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[36084.809764] (1)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[36084.809826] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[36084.809860] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[36084.810097] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[36084.816344] (1)[28810:loadDriverThrea] exit
<7>[36084.846888] (0)[28448:kworker/u:3] fork [28814:kworker/u:3]
<7>[36084.846925] (1)[28814:kworker/u:3] fork [28815:kworker/u:3]
<7>[36084.846965] (0)[28815:kworker/u:3] exit
<7>[36084.846995] (0)[28815:kworker/u:3] sig 17 to [28814:kworker/u:3]
<7>[36084.847035] (0)[28814:kworker/u:3] exit
<6>[36084.852930] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[36084.852957] (1)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[36084.873168] (1)[2:kthreadd] fork [28816:kthreadd]
<7>[36084.874188] (1)WQ_WARN: cpu:1, proc:kworker/1:1, dur: 21103077 > 8ms
<7>[36084.874258] (1)work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<5>[36084.874957] (1)init: starting `wpa_supplicant`
<7>[36084.875703] (1)[1:init] fork [28817:init]
<7>[36084.876504] (1)[310:WifiStateMachin] fork [28818:WifiStateMachin]
<7>[36084.877884] (0)[28818:WifiStateMachin] set proc[28818] name: ->[WifiMonitor]
<7>[36084.884589] (1)[28817:init] set proc[28817] name: ->[logwrapper]
<7>[36084.886413] (1)[28817:logwrapper] fork [28819:logwrapper]
<7>[36084.904905] (1)[28819:logwrapper] set proc[28819] name: ->[wpa_supplicant]
<4>[36084.913059] (0)dbs_check_cpu: turn off CPU1
<4>[36084.923072] (0)hp_work_handler: cpu_down kick off
<7>[36084.923168] (1)[2:kthreadd] fork [28820:kthreadd]
<7>[36084.933296] (1)[2:kthreadd] fork [28821:kthreadd]
<4>[36084.933567] (1)[Power/hotplug] platform_cpu_disable, cpu: 1
<4>[36084.933787] (1)[Power/hotplug] platform_cpu_die, cpu: 1
<5>[36084.933800] (0)CPU1: shutdown
<4>[36084.933805] (1)[Power/hotplug] cpu_enter_lowpower
<4>[36084.933816] (0)[Power/hotplug] platform_cpu_kill, cpu: 1
<7>[36084.939398] (0)[28786:ksoftirqd/1] exit
<4>[36084.939818] (0)[WDK]:start Stop CPU:1
<4>[36084.939829] (0)[WDK]cpu 1 plug off, wk_stop_kick_cpu
<7>[36084.940052] (0)[28784:migration/1] exit
<7>[36084.940767] (0)[28821:kworker/1:3] exit
<4>[36084.940842] (0)hp_work_handler: cpu_down completion
<7>[36084.940859] (0)WQ_WARN: cpu:0, proc:kworker/0:0, dur: 17788230 > 8ms
<7>[36084.940885] (0)work: hp_work_handler+0x0/0x84
<7>[36085.033165] (0)[28790:kworker/1:1] exit
<7>[36085.033265] (0)[28816:kworker/1:2] exit
<7>[36085.033339] (0)[28785:kworker/1:0] exit
<7>[36085.034544] (0)[28820:workqueue_trust] exit
<7>[36085.235339] (0)[28801:com.specdevice] exit
<4>[36085.273118] (0)dbs_check_cpu: turn on CPU1
<4>[36085.283026] (0)hp_work_handler: cpu_up kick off
<7>[36085.283099] (0)[2:kthreadd] fork [28822:kthreadd]
<7>[36085.293271] (0)[2:kthreadd] fork [28823:kthreadd]
<7>[36085.295598] (0)[2:kthreadd] fork [28824:kthreadd]
<2>[36085.305741] (0)Boot slave CPU
<4>[36085.305760] (0)[Power/hotplug] boot_secondary, cpu: 1
<4>[36085.308271] (1)CPU1: Booted secondary processor
<2>[36085.308283] (1)Slave cpu init
<4>[36085.308297] (1)[Power/hotplug] platform_secondary_init, cpu: 1
<4>[36085.308307] (1)[WDK]cpu 1 plug on platform_secondary_init++++++
<4>[36085.308324] (1)WDT mpcore_wdt_keepalive:cpu-1: count:325000000. prescale:0, mpcore_margin:25,TWD_WDOG_LOAD:135f1b40
<4>[36085.308338] (1)WDT mpcore_wdt_start:cpu-1,control: 0x7, count:0x135f1b3c, load:0x135f1b40
<4>[36085.308352] (1)[WDK]cpu 1 plug on platform_secondary_init------
<4>[36085.308656] (0)[WDK]cpu 1 plug on wk_start_kick_cpuhp_work_handler: cpu_up completion
<7>[36085.308679] (0)WQ_WARN: cpu:0, proc:kworker/0:0, dur: 25652692 > 8ms
<7>[36085.308706] (0)work: hp_work_handler+0x0/0x84
<6>[36085.313003] (1)Switched to NOHz mode on CPU #1
<7>[36085.826358] (1)[2:kthreadd] fork [28825:kthreadd]
<7>[36085.843312] (0)WQ_WARN: cpu:0, proc:kworker/0:0, dur: 310114846 > 8ms
<7>[36085.843378] (0)work: thermal_zone_device_check+0x0/0x18
<5>[36085.877094] (1)init: starting `orientationd`
<7>[36085.877301] (1)[1:init] fork [28826:init]
<7>[36085.879215] (1)[28826:init] set proc[28826] name: ->[orientationd]
<7>[36085.882747] (1)[28826:orientationd] exit
<7>[36085.882955] (1)[28826:orientationd] sig 17 to [1:init]
<5>[36085.883200] (1)init: process `orientationd`, pid 28826 exited
<5>[36085.883221] (1)init: process `orientationd` killing any children in process group
<3>[36085.955302] (0)[WMT-DEV][I]wmt_dev_tra_sdio_poll:**poll_during_time = 15909470 > 3000, sdio_during_count = 2520 > 200, query
<3>[36085.955320] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:sdio traffic , we must query temperature..
<4>[36085.955342] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[36085.955859] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[36085.955894] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[36085.955923] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[36085.955952] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[36085.956606] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[36085.956639] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[36085.956689] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[36085.957439] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<4>[36085.957467] (0)[STP-PSM] [I]_stp_psm_put_op: opId(0) enqueue
<3>[36085.957481] (0)[WMT-DEV][I]wmt_dev_tm_temp_query:[Thermal] current_temp = 0x28
<4>[36085.957533] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<3>[36085.957577] (1)[WMT-CORE][I]opfunc_pwr_sv:**** Send sleep command
<3>[36085.957838] (1)[WMT-CORE][I]opfunc_pwr_sv:Send sleep command OK!
<3>[36085.957854] (1)[WMT-CORE][I]opfunc_pwr_sv:Do STP-CB! 0 bf13066c
<6>[36085.957888] (1)src = COMBO_IF_UART, to enter deep idle? 1
<7>[36086.048320] (0)[28807:AsyncTask #2] fork [28827:AsyncTask #2]
<4>[36086.050087] (0)[MDPK W]: MT6577_MDP_Flush(): FLUSH() by different process. owner:0, current = ( process, pid, tgid ) = ( AsyncTask #2, 28827, 28827 ) Rsc=0x00000000
<7>[36086.050326] (1)[28782:Binder Thread #] fork [28828:Binder Thread #]
<7>[36086.050396] (0)[28828:Binder Thread #] set proc[28828] name: ->[Binder Thread #]
<7>[36086.079918] (0)[28827:AsyncTask #2] set proc[28827] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=SLPA.ICS
ro.build.version.incremental=vD5Y-0
ro.custom.build.version=vD5Y-0
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Thu Oct 25 12:44:17 CST 2012
ro.build.date.utc=1351140257
ro.build.type=user
ro.build.user=zxliu
ro.build.host=aclgcl-ubnt243
ro.build.tags=release-keys
ro.product.model=ALCATEL ONE TOUCH 992D
ro.product.brand=TCT
ro.product.name=Martell_lite
ro.product.device=Martell_lite_GSM
ro.product.board=Martell_lite
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=TCT
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=Martell_lite_GSM
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=Martell_lite-user 4.0.4 IMM76D vD5Y-0 release-keys
ro.build.fingerprint=TCT/Martell_lite/Martell_lite_GSM:4.0.4/IMM76D/vD5Y-0:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
ro.product.display.model=ALCATEL ONE TOUCH 992D
#
#jrd sys properties
#
A51.supported.for.perso=true
A52.supported.for.perso=false
A53.supported.for.perso=true
Modem.FD.supported.for.perso=true
Def.shuttersound.enable=true
AMRWB.GSM.supported.for.perso=false
AMRWB.UMTS.supported.for.perso=true
ro.config.switch_on=bootaudio.mp3
ro.config.switch_off=shutaudio.mp3
ro.config.key_switch_on_off=1
ro.def.screen.brightness=100
ro.def.screen.brightness.mode=manual
ro.def.software.version=010 01
ro.com.android.dataroaming=false
ro.com.android.dataroaming2=false
ro.def.auto-rotation=false
qemu.hw.mainkeys=1
ro.config.alarm_alert=Sober.ogg
ro.com.google.clientidbase=android-alcatel
ro.com.google.clientidbase.am=android-alcatel
ro.com.google.clientidbase.ms=android-alcatel
ro.com.google.clientidbase.gmm=android-alcatel
ro.com.google.clientidbase.yt=android-alcatel
ro.setupwizard.mode=DISABLED
Def.PhoneVibrator.enable=true
gsm.version.baseband=6180
persist.adb.notify=1
persist.service.adb.enable=1
ro.power.key.default.behavior=1
ro_config_phnum_significant_len=7
ro.mobile_data_enable=1
def_show_on_map_hide=0
def.dualmic.display.enabled=false
def.dualmic.enabled=false
ro.music.lyrics.enable=1
ro.bluetooth.default.name=
ro.srs.audio.effect.enable=true
ro.update.cfi.for.all=false
ro.audio.parameters.config=0
ro.ringer_volume_general=5
ro.ringer_volume_meeting=1
ro.ringer_volume_outdoor=7
ro.notification_volume_general=5
ro.notification_volume_meeting=1
ro.notification_volume_outdoor=7
ro.alarm_volume_general=5
ro.alarm_volume_meeting=1
ro.alarm_volume_outdoor=7
ro.vibration_general=true
ro.vibration_silent=true
ro.vibration_meeting=true
ro.vibration_outdoor=true
ro.screen_touch_tone_general=true
ro.screen_touch_tone_meeting=false
ro.screen_touch_tone_outdoor=true
ro.sound_effect_general=true
ro.sound_effect_meeting=false
ro.sound_effect_outdoor=true
ro.haptic_feedback_general=true
ro.haptic_feedback_silent=false
ro.haptic_feedback_meeting=false
ro.haptic_feedback_outdoor=true
ro.lock_screen_general=true
ro.lock_screen_meeting=false
ro.lock_screen_outdoor=true
ro.product.locale.language=ru
ro.product.locale.region=RU
persist.sys.sd.defaultpath=/mnt/sdcard
ro.def.software.svn=01001
ro.config.message_ringtone=Wood.ogg
ro.sendemptysms.enable=true
Modem.Manufacture.for.perso=ALCATEL
Modem.Model.for.perso=ONE TOUCH 992D
ro.drm.enable=true
ro.oma.cp.authen_mandatory=true
ro.operator.name=
persist.sys.timezone=Europe/Moscow
def_search_engine=google
def_search_website=http://www.baidu.com/s?wd=
ecc_list_for_peso=
ro_default_emergency_number=
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.6577.SP.V1.20120605
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.6577.SP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 286092 0 - Live 0xbf200000 (P)
cfg80211 121452 0 - Live 0xbf1d7000
mtk_fm_priv 8917 0 - Live 0xbf1d1000 (P)
mt6620_fm_drv 112549 1 mtk_fm_priv, Live 0xbf1a9000
mtk_stp_bt 39862 0 - Live 0xbf19c000
mtk_stp_gps 37318 0 - Live 0xbf18f000
mtk_stp_uart 21601 1 - Live 0xbf186000 (P)
mtk_stp_wmt 375916 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11c000 (P)
mtk_hif_sdio 18777 2 wlan,mtk_stp_wmt, Live 0xbf113000
devinfo 840 0 - Live 0xbf10f000 (P)
devapc 4557 0 - Live 0xbf10a000 (P)
sec 90381 0 - Live 0xbf0ed000 (P)
vcodec_kernel_driver 28294 0 - Live 0xbf0e1000 (P)
m4u 112266 8 - Live 0xbf0bc000 (P)
ccmni 17062 0 - Live 0xbf0b3000 (P)
ccci 116968 15 ccmni, Live 0xbf08b000 (P)
ccci_plat 126142 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6085 0 - Live 0xbf05e000 (P)
mtklfb 23534 0 - Live 0xbf054000
pvrsrvkm 233183 135 mtklfb, Live 0xbf00d000
mtk_hwe 1286 0 - Live 0xbf009000 (P)
aed 16252 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.566 GB actual); 32 GB (29.499 GB actual)
mmcblk0: 3.566 GB
mmcblk1: 29.499 GB
触摸屏为 TCT ALCATEL ONE TOUCH 992D
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
新电池 TCT ALCATEL ONE TOUCH 992D
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
占地面积 TCT ALCATEL ONE TOUCH 992D
$5.66 TCT Through Hole Drill Bit Woodworking Drilling Bit CNC Router 3mm 4mm Hole Making Boring 70mm Length Shank 10mm
$195.74 5PCS Good Quality Carbide TCT Dowel Drill Bits CNC Router Tools For Woodworking Machinery Total Length 70mm
$3 Two Flutes Woodworking Gang Drill Bits Blind Hole TCT Drilling Head 70mm 57mm for Multi Rows Boring Locator Machine 10mm 1PCS
$3.57 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.71 12-300mm TCT Hole Saw Tungsten Carbide Tipped Core Drill Bit Cobalt Cutter Tools For Stainless Steel Plate Iron Metal PVC Opener
$3.32 1pc 12-160mm TCT Carbide Hole Saw Drill Bit Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$9.16 60 90 Degree Countersink Drill with Brazing Carbide TCT straight handle Chamfering Milling Tool YG8Welded tungsten steel chamfer
$3.13 1 pc 5A Carbide Tip TCT Drill Bit Hole Saw 12-150mm Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$2.18 XCAN Drill Bit TCT/HSS Annular Cutter Pilot Pin 6.35mm 8mm Shank 77/90/102/127/160mm Long Pilot Pin Steel Plate Drill Tool
$29 1Pc 15-100mm TCT Hole Saw Carbide Tip Core Drill Bit Cutter Drilling crown for metal Stainless Steel Alloy
$34.67 BAILEY 1PC TCT Dowel Drill Bits Woodworking Drilling Bit CNC Router Bit 5-8mm Hole Making Boring 70/57mm Length Hard Metal Drill
$36.8 12-100mm TCT Hole Saw Tungsten Carbide Tipped Drill Bit Set Hole Saw Cutter For Stainless Steel Metal Alloy Drilling
$3.86 Free Shipping 2PCS 3-10 Diameter 85-110mm Length TCT Tip SDS Plus Round Shank 4 Hollow Hammer Drill Bits For Home Masonry Work
$39.14 BAILEY 1PC 70mm TCT Through Hole Drill Bits Woodworking Tool CNC Router Hole Making Boring Drill Head Power Tools Accessories
$28.49 XCAN Drill Bit Carbide Cutter 12mm 32mm Diameter 35mm Length Weldon Shank TCT Hollow Drill Annular Cutter for Metal Drilling
$6.14 12.7mm 3 Flutes TCT Trimming Straight Bit Milling Cutter For MDF Plywood Chipboard Hard Wood Drill Engraving Router Bit Endmill
$4.37 TCT Annular Cutter Pilot Pin Center Rod Hollow Drill Steel Plate Drill HSS Annular Cutter Center Positioning Rod Ejector Pin
$2.44 1/4" Shank TCT Straight End Mill Router Bits 1.6mm-6mm Woodworking Carving 2 Flute Milling Cutter Wood Engraving Carbide CNC Bit
$119.56 5PCS High Quality 57/70mm Wood Carbide Crown TCT Brad-point Dowel Drill Bits CNC Router For Woodworking Tools Machinery
$154.58 XCAN TCT Hollow Drill Bit TiCN Coating 12-32mm Weldon Shank Carbide Annular Cutter Hole Saw Cutter Metal Hole Drill Bit
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |