alps PMP7170B3GCE
一般规格
生产厂家alps
型号PMP7170B3GCE
Android版4.0.4; eng.android.1374542471; SDK15
中央处理单元1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz
显示800 x 480; DPI: 120; Evaluated Size: 7,8"
触摸屏Multitouch 5 points
图形处理器PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@789263
内存RAM512 MB (484 MB available)
快闪记忆体4 GB (3.629 GB actual); 8 GB (7.460 GB actual) (见存储器映射选项卡)
沟通
电话GSM; Net: UMTS
WiFiwlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode
USB主机Yes
蓝牙Bluetooth 4.0+HS
全球定位系统Yes
高级功能
前置摄像头Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: auto on off torch
背照相机Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash
传感器AMI304 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA;
ADXL345 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA;
bh1620fvc Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA;
Corrected Gyroscope Sensor (Google Inc.); range: 0...34,91; resolution: 0,011 (0,031%); power: 6,48mA;
Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 6,48mA;
Gravity Sensor (Google Inc.); range: 0...19,613; resolution: 0,004 (0,02%); power: 6,48mA;
Linear Acceleration Sensor (Google Inc.); range: 0...19,613; resolution: 0,004 (0,02%); power: 6,48mA;
震动模式Yes
支持的语言43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese
电池Technology: Li-ion; Voltage: 3755
FM radio76 to 108MHz
SD Version:1.1 5

KERNEL: Linux version 3.0.13 (android@system-desktop) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Tue Jul 23 09:20:54 CST 2013
CODENAME: REL
Mainboard: yecon75_tb_ics
BRAND: Prestigio
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: PMP7170B3GCE
DISPLAY: PMP7170B3GCE_20130723_V1.0.5
FINGERPRINT: alps/yecon75_tb_ics/yecon75_tb_ics:4.0.4/IMM76D/1374542471:user/test-keys
HARDWARE: mt6575
ID: IMM76D
TAGS: test-keys

Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000

GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture

<7>[ 284.675022] [2000:dmesg] exit
<7>[ 284.675208] [2000:dmesg] sig 17 to [1997:AsyncTask #2]
<7>[ 284.709321] [292:WifiStateMachin] fork err at pid
<7>[ 284.709350] [292:WifiStateMachin] fork [2001:WifiStateMachin]
<7>[ 284.709401] [2001:WifiStateMachin] set proc[2001] name: ->[loadDriverThrea]
<7>[ 284.756246] [246:er.ServerThread] fork err at pid
<7>[ 284.756276] [246:er.ServerThread] fork [2002:er.ServerThread]
<7>[ 284.768265] [2002:er.ServerThread] set proc[2002] name: ->[Thread-165]
<6>[ 284.770384] [WLAN] rfkill_set_block(blocked 0)
<6>[ 284.770396] [WLAN] Power on
<3>[ 284.770411] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 284.771191] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 284.771236] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 284.772302] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[ 284.773050] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 284.773754] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(GPIO149)
<3>[ 284.774491] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 284.775185] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO107)
<3>[ 284.775943] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(13)
<3>[ 284.777859] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO104)
<7>[ 284.779554] [2002:Thread-165] exit
<3>[ 284.779610] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(10)
<3>[ 284.780362] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 284.781097] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 284.781834] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 284.782561] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 284.783286] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 284.784002] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 284.784739] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 284.785844] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[ 284.786603] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO187)
<3>[ 284.797630] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 284.798820] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 284.799684] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[ 284.800610] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<5>[ 284.908593] [Power/RTC] RTC_GPIO user 9 enables 32k (0x1200)
<3>[ 285.017783] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, rtc clock exported
<3>[ 285.117779] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 285.118540] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT6620]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 285.120139] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[ 285.121101] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 285.122169] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 285.123232] mt6575_get_bus_freq() return 166833
<3>[ 285.124043] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 285.124806] Flush type = 4 Rx Queue
<3>[ 285.125367] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 285.130633] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 285.130655] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 285.131380] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 285.132071] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 285.132762] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[ 285.133568] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 285.133579] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 285.133589] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 285.138857] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[ 285.144879] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[ 285.150966] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[ 285.151906] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[ 285.152945] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[ 285.154148] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[ 285.165498] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 285.166315] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 285.168967] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[ 285.172004] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[ 285.172956] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120419185021
<3>[ 285.173898] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 285.174699] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 285.175502] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[ 285.176313] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[ 285.177378] [WMT-IC][I]mt6620_patch_dwn:===========================================
<5>[ 285.348798] [Power/Alarm] alarm_timer_triggered type 3 at 285.320010098 (1)
<5>[ 285.350336] [Power/Alarm] alarm 3 set 900.000000000
<5>[ 285.355778] [Power/Alarm] alarm 3 set 345.319000000
<5>[ 285.358107] [Power/Alarm] alarm wait (0x0)
<3>[ 285.509515] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 928) ok
<3>[ 285.510468] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[ 285.511637] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf12e108)
<3>[ 285.516189] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[ 285.517174] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 285.517186] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[ 285.517198] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[ 285.539772] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[ 285.540433] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 285.540448] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 285.540466] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 285.541137] board_sdio_ctrl force off before on
<6>[ 285.541144] mtk_wcn_cmb_sdio_off (3)
<6>[ 285.541192] mtk_wcn_cmb_sdio_on (3)
<3>[ 285.541226] msdc3 -> USR Resume <- msdc_pm() : L<1224> PID<0x4f>
<3>[ 285.557942] msdc3 -> ================ <- msdc_set_mclk() : L<757> PID<0x1c>
<3>[ 285.558953] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<759> PID<0x1c>
<3>[ 285.560574] msdc3 -> ================ <- msdc_set_mclk() : L<760> PID<0x1c>
<7>[ 285.575168] [1989:com.specdevice] exit
<3>[ 285.583303] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1284> PID<0x1c>
<3>[ 285.607883] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3182> PID<0x1c>
<3>[ 285.609035] msdc3 -> ================ <- msdc_set_mclk() : L<757> PID<0x1c>
<3>[ 285.610040] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<759> PID<0x1c>
<3>[ 285.611683] msdc3 -> ================ <- msdc_set_mclk() : L<760> PID<0x1c>
<6>[ 285.613678] mmc2: new high speed SDIO card at address 0001
<6>[ 285.615759] [WMT-DFT][I]hif_sdio_probe:start!
<6>[ 285.615775] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[ 285.615786] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[ 285.615796] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[ 285.615803] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 285.615896] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[ 285.615925] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 72716077 > 8ms
<7>[ 285.615948] work: mmc_rescan+0x0/0x370
<6>[ 285.697780] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 285.697932] [2:kthreadd] fork err at pid
<7>[ 285.697958] [2:kthreadd] fork [2003:kthreadd]
<6>[ 285.697983] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 285.698019] [wlan] net_device prDev(0xda0dd000) allocated
<4>[ 285.699083] [RT_MONITOR]WARNNING [2003:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [2003:ksdioirqd/mmc2]
<5>[ 285.701896] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[ 285.702992] Backtrace:
<4>[ 285.703312] [] (dump_backtrace+0x0/0x10c) from [] (dump_stack+0x18/0x1c)
<5>[ 285.708130] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 285.709009] [wlan] Virtual Address = df69e000 for COMMON MGMT MEMORY POOL.
<5>[ 285.709854] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 285.710514] [wlan] Virtual Address = df6a0000 for SW_RFB_T.
<5>[ 285.711197] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 285.711886] [wlan] r7:00000001 r6:00000000 r5:dddda000 r4:d86c1c00
<4>[ 285.713477] [] (dump_stack+0x0/0x1c) from [] (__sched_setscheduler+0x490/0x5c8)
<4>[ 285.714603] [] (__sched_setscheduler+0x0/0x5c8) from [] (sched_setscheduler+0x14/0x18)
<4>[ 285.715809] [] (sched_setscheduler+0x0/0x18) from [] (sdio_irq_thread+0x38/0x2c4)
<4>[ 285.716957] [] (sdio_irq_thread+0x0/0x2c4) from [] (kthread+0x90/0x98)
<4>[ 285.718161] Virtual Address = df6a4000 for MSDU_INFO_T.
<6>[ 285.718839] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[ 285.718934] [] (kthread+0x0/0x98) from [] (do_exit+0x0/0x6e4)
<4>[ 285.720355] r7:00000013 r6:c008917c r5:c00a07fc r4:dd16fd78
<6>[ 285.737851] [wlan] Chip ID: 0x6620
<6>[ 285.737863] [wlan] Revision ID: 0x1
<6>[ 286.395708] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 286.627840] [wlan] Ready bit asserted
<5>[ 286.669804] [wlan] [wifi] wlan%d netif_carrier_off
<6>[ 286.670398] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 286.670486] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 286.670578] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[ 286.671562] [2:kthreadd] fork err at pid
<7>[ 286.671590] [2:kthreadd] fork [2004:kthreadd]
<5>[ 286.671630] [wlan] tx_thread starts running...
<6>[ 286.673370] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 286.673385] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 286.673404] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 286.674740] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[ 286.674748]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[ 286.676527] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[ 286.677318] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[ 286.682026] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[ 286.683591] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[ 286.683599]
<4>[ 286.684695] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[ 286.685578] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[ 286.685585]
<3>[ 286.690314] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[ 286.693894] [2001:loadDriverThrea] exit
<7>[ 286.732115] [5:kworker/u:0] fork err at pid
<7>[ 286.732144] [5:kworker/u:0] fork [2005:kworker/u:0]
<7>[ 286.732203] [2005:kworker/u:0] fork err at pid
<7>[ 286.732220] [2005:kworker/u:0] fork [2006:kworker/u:0]
<7>[ 286.732282] [2006:kworker/u:0] exit
<7>[ 286.732316] [2006:kworker/u:0] sig 17 to [2005:kworker/u:0]
<7>[ 286.732357] [2005:kworker/u:0] exit
<6>[ 286.735697] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 286.735732] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 286.748604] WQ_WARN: cpu:0, proc:kworker/0:0, dur: 15402847 > 8ms
<7>[ 286.748693] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[ 286.750443] [1:init] fork err at pid
<7>[ 286.750477] [1:init] fork [2007:init]
<7>[ 286.760479] [292:WifiStateMachin] fork err at pid
<7>[ 286.760516] [292:WifiStateMachin] fork [2008:WifiStateMachin]
<7>[ 286.762123] [2008:WifiStateMachin] set proc[2008] name: ->[WifiMonitor]
<7>[ 286.778645] [2007:init] set proc[2007] name: ->[logwrapper]
<7>[ 286.780378] [2007:logwrapper] fork err at pid
<7>[ 286.780409] [2007:logwrapper] fork [2009:logwrapper]
<7>[ 286.792319] [2009:logwrapper] set proc[2009] name: ->[wpa_supplicant]
<5>[ 286.888128] [wlan] N=0 closed
<5>[ 286.888574] [wlan] EVENT-ROAMING ABORT: Current Time = -13130
<5>[ 286.889280] [wlan] [13] TRANSITION: [0] -> [0]
<6>[ 286.895116] [wlan] NAF=0,0,0
<6>[ 286.895132] [wlan] NAF=0,0,0
<5>[ 287.009074] [wlan] [13] TRANSITION: [0] -> [2]
<7>[ 287.166184] [1379:estigio.ereader] fork err at pid
<7>[ 287.166222] [1379:estigio.ereader] fork [2010:estigio.ereader]
<7>[ 287.173455] [2010:estigio.ereader] set proc[2010] name: ->[SharedPreferenc]
<7>[ 287.212860] [2010:SharedPreferenc] exit
<7>[ 287.415319] [1997:AsyncTask #2] fork err at pid
<7>[ 287.418069] [1997:AsyncTask #2] fork [2011:AsyncTask #2]
<7>[ 287.423541] [2011:AsyncTask #2] set proc[2011] name: ->[dmesg]

# begin build properties
# autogenerated by buildinfo.sh
ro.product.version=1.0.5
ro.prestigio.ota.host=otg.dl.prestigio.com
sys.project.fat.path=/dev/block/mmcblk0p4
sys.project.fat.volume=PMP7170B3G
ro.build.id=IMM76D
ro.build.display.id=PMP7170B3GCE_20130723_V1.0.5
ro.build.version.incremental=eng.android.1374542471
ro.custom.build.version=1374542471
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Tue Jul 23 09:22:23 CST 2013
ro.build.date.utc=1374542543
ro.build.type=user
ro.build.user=android
ro.build.host=system-desktop
ro.build.tags=test-keys
ro.product.model=PMP7170B3GCE
ro.product.brand=Prestigio
ro.product.name=yecon75_tb_ics
ro.product.device=PMP7170B3GCE
ro.product.board=yecon75_tb_ics
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
persist.sys.timezone=Africa/Casablanca
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=yecon75_tb_ics
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=yecon75_tb_ics-user 4.0.4 IMM76D eng.android.1374542471 test-keys
ro.build.fingerprint=alps/yecon75_tb_ics/yecon75_tb_ics:4.0.4/IMM76D/1374542471:user/test-keys
ro.build.flavor=
ro.build.characteristics=tablet
ro.custom.id=unknown
ro.build.time=20130723.092223
ro.hw.id=52736
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS.MP.V2.2
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
mediatek.wlan.channelselect=1
ro.sf.lcd_density=120
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
#ipo
sys.ipo.tbl=1
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=270
ril.current.share_modem=1
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=false
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

wlan 276575 0 - Live 0xbf1e4000 (P)
cfg80211 122425 0 - Live 0xbf1bb000
mtk_fm_priv 8909 0 - Live 0xbf1b5000 (P)
mt6620_fm_drv 110874 1 mtk_fm_priv, Live 0xbf18d000
mtk_stp_bt 39718 0 - Live 0xbf180000
mtk_stp_gps 37190 0 - Live 0xbf173000
mtk_stp_uart 21669 0 - Live 0xbf16a000 (P)
mtk_stp_wmt 344054 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf109000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf100000
devinfo 748 0 - Live 0xbf0fc000 (P)
sec 109563 0 - Live 0xbf0db000 (P)
mt6575_vcodec_kernel_driver 23817 0 - Live 0xbf0d0000 (P)
mt6575_m4u 108821 4 - Live 0xbf0ac000 (P)
ccmni 17214 0 - Live 0xbf0a3000 (P)
ccci 140352 15 ccmni, Live 0xbf075000 (P)
ccci_plat 125068 3 sec,ccmni,ccci, Live 0xbf04e000 (P)
mtk_drvb 5115 0 - Live 0xbf049000 (P)
mtklfb 14369 0 - Live 0xbf041000
pvrsrvkm 163655 83 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)

RAM: 512 MB (484 MB available)

System RAM: 484.000MB
mtkfb.0: 6.000MB


Flash: 4 GB (3.629 GB actual); 8 GB (7.460 GB actual)

mmcblk0: 3.629 GB
mmcblk1: 7.460 GB


触摸屏为 alps PMP7170B3GCE

$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

新电池 alps PMP7170B3GCE

$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

占地面积 alps PMP7170B3GCE

$3.61 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch

$63.06 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K

$6.6 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft

$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k

$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm

$6.59 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle

$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L

$8.13 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin

$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers

$1.36 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

NEW: 查看完整数据库 >>

的最新:

MBX MoreTV 1.0
Xiaomi M2101K7BL
Mi Pad 6 Pro
Mate50
A19 Pro
alps i14PROMAX
Xiaomi 2201117SI
NUMVIBE X30Pro
Pad_Ultra
INFINIX Infinix X6835B
Xiaomi Redmi 5 Plus
Cat S62 Pro
alps S24 Ultra
alps Reno9 Pro+ 5G
Kobo arc 10HD
L16 Max lingbo l16 max
Lingbo tab s9 ultra
HUAWEI EC6108V9-01
samsung 14 Pro Max
L16 Max
HUAWEI VNS-L31
alps I14 Pro Max
unknown HiDPTAndroid_Hi3751V510
S9 Ultra
Amazon KFRAWI
OnePlus GM1910
android P30
welcome S23 Ultra
AXDIA INTERNATIONAL GMBH PACE10
vivo V1916A
Google Pixel 7
Galaxy S24 Ultra 5G SM-S928B/DS
QUALCOMM trinket for arm64
alps F9210B
Pad 6 Pro
HUAWEI JAT-LX1
alps Galaxy S22 Ultra
HUAWEI KSA-LX9
alps Rino9_pro+
XXB_GMS
realme RMX3363
Google MBOX
alps L015B
alps i13 pro max
alps i14_Pro_Max
SAMSUNG SM-S928BIU
HUAWEI MGA-LX3
alps ZL10
HUAWEI JAT-LX1
Fplus T1100