sprd GT_I9300 规格

一般信息
操作系统的详细信息
CPU信息
图形处理器细节
WiFi内核信息
build.prop
的内核模块
存储器映射

一般规格
生产厂家	sprd
型号	GT_I9300
Android版	4.1.9; W12.20_P10_20130118.162556; SDK10
中央处理单元	1 core; ARMv7 Processor rev 1 (v7l) sprdbp; Max: 1000,0 MHz; Min: 400,0 MHz
显示	854 x 480; DPI: 240; Evaluated Size: 4,1"
触摸屏	NOT multitouch 1 point
图形处理器	Mali-300; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
内存RAM	512 MB (486 MB available)
快闪记忆体	16 GB (14.906 GB actual); 0.5 GB (0.456 GB actual) (见存储器映射选项卡)
沟通
电话	GSM
WiFi	unifi_sdio
USB主机	No
蓝牙	no
全球定位系统	No
高级功能
前置摄像头	Photo: 8.0 MP; Max: 3264x2448; Focus: auto auto-multi macro; Flash modes: off on torch
背照相机	Photo: 3.1 MP; Max size: 2048x1536; Focus: auto; No flash
传感器	BMA250 Acceleration Sensor (Bosch Sensortec); range: 0...19,613; resolution: 0,038 (0,195%); power: 0,13mA;
	MS-3E (YAS530) Magnetic Sensor (Yamaha Corporation); range: 0...800; resolution: 0,3 (0,038%); power: 4mA;
	AL3006 Light sensor (LITEON); range: 0...100000; resolution: 1 (0,001%); power: 0,005mA;
	AL3006 Proximity sensor (LITEON); range: 0...1; resolution: 1 (100%); power: 0,005mA;
	Gravity Sensor (Google Inc.); range: 0...19,613; resolution: 0,038 (0,195%); power: 0,13mA;
	Linear Acceleration Sensor (Google Inc.); range: 0...19,613; resolution: 0,038 (0,195%); power: 0,13mA;
	Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 4,13mA;
震动模式	Yes
支持的语言	49; Arabic; Bulgarian; Bengali; Catalan; Cebuano; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hausa; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Burmese; Norwegian; Dutch; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Tamil; Telugu; Thai; Tagalog; Turkish; Uighur; Ukrainian; Urdu; Vietnamese; Chinese
电池	Technology: Li-ion; Voltage: 4032
Owner's comment:	sprdroid_base
SD Version:	1.1 7

KERNEL: Linux version 2.6.35.7 (rooter@rooter) (gcc version 4.4.3 (GCC) ) #3 Fri Jan 18 17:22:52 CST 2013
CODENAME: REL
Mainboard: sp6820a
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: hsdroid
DISPLAY: GINGERBREAD.XXKL3
FINGERPRINT: unknown
HARDWARE: mtk6577
ID: GINGERBREAD.XXKL3
TAGS: test-keys

Processor : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1024.00
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc05
CPU revision : 1
Hardware : mtk6577
Revision : 0101
Serial : 0000000000000000

GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_EXT_shader_texture_lod

<4>[85570.864000] sprd alloc pool failed, use normal way.
<4>[85570.932000] sprd alloc pool failed, use normal way.
<4>[85570.939000] sprd alloc pool failed, use normal way.
<4>[85570.950000] sprd alloc pool failed, use normal way.
<4>[85570.962000] sprd alloc pool failed, use normal way.
<4>[85570.964000] sprd alloc pool failed, use normal way.
<4>[85570.969000] sprd alloc pool failed, use normal way.
<4>[85570.980000] sprd alloc pool failed, use normal way.
<4>[85571.076000] sprd alloc pool failed, use normal way.
<4>[85571.154000] sprd alloc pool failed, use normal way.
<4>[85571.210000] sprd alloc pool failed, use normal way.
<4>[85571.217000] sprd alloc pool failed, use normal way.
<4>[85571.219000] sprd alloc pool failed, use normal way.
<4>[85571.227000] sprd alloc pool failed, use normal way.
<4>[85571.229000] sprd alloc pool failed, use normal way.
<4>[85571.431000] UMP<2>: Session closed
<4>[85571.601000] mmc1, clock_control:0xe0107
<6>[85571.622000] rtc alarm set at 1462304824, now 1462304823, rtc delta -1.676000001
<4>[85571.704000] mmc1, clock_control:0xe4007
<4>[85571.720000] mmc1, clock_control:0xe0107
<4>[85571.734000] mmc1, clock_control:0xe4007
<6>[85572.096000] UniFi: unregister from MMC sdio
<4>[85572.313000] RTC ***** interrupt happen
<4>[85572.313000] linux nk_sprd_unmask_ana_irq 34, int_enable = 0xe6a5dde5
<4>[85572.353000] CsrWifiCardPower:1357, power=0
<4>[85572.353000] sdhci_bus_scan, entry
<4>[85572.354000] unifi: unloaded
<4>[85572.361000] mmc_sdio_detect:465 About to select card cd3b2e00
<3>[85572.361000] init: sys_prop: permission denied uid:1000 gid:1000 name:wifi.driver.status
<4>[85572.361000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[85572.371000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[85572.381000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<4>[85572.391000] mmc1: !!!!! error in sending cmd:7, int:0x10000, err:-110
<6>[85572.401000] mmc1: card 0923 removed
<4>[85572.401000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[85572.401000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[85572.402000] mmc1, clock_control:0x8007
<4>[85572.550000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<6>[85572.550000] mmc1: Re-scan card rc = -110 (retries = 2)
<4>[85572.550000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[85572.551000] mmc1, clock_control:0x8007
<4>[85572.720000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<6>[85572.720000] mmc1: Re-scan card rc = -110 (retries = 1)
<4>[85572.720000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[85572.721000] mmc1, clock_control:0x8007
<4>[85572.810000]
<4>[85572.810000] ####: thread period: [0 + 0 + [arch_idle = 12492]]/[30127]
<4>[85572.810000]
<4>[85572.810000] ===========================
<4>[85572.810000] ##: GR_GEN0 = ffffb374.
<4>[85572.810000] GEN0_I2C_EN =1.
<4>[85572.810000] GEN0_GPIO_EN =1.
<4>[85572.810000] GEN0_I2C0_EN =1.
<4>[85572.810000] GEN0_I2C1_EN =1.
<4>[85572.810000] GEN0_I2C2_EN =1.
<4>[85572.810000] GEN0_I2C3_EN =1.
<4>[85572.810000] GEN0_SPI0_EN =1.
<4>[85572.810000] GEN0_SPI1_EN =1.
<4>[85572.810000] GEN0_I2S0_EN =1.
<4>[85572.810000] GEN0_I2S1_EN =1.
<4>[85572.810000] GEN0_I2S_EN =1.
<4>[85572.810000] GEN0_PIN_EN =1.
<4>[85572.810000] GEN0_EPT_EN =1.
<4>[85572.810000] GEN0_SIM1_EN =1.
<4>[85572.810000] GEN0_SPI_EN =1.
<4>[85572.810000] GEN0_UART0_EN =1.
<4>[85572.810000] GEN0_UART1_EN =1.
<4>[85572.810000] GEN0_UART2_EN =1.
<4>[85572.810000] ##: GR_CLK_EN = 03e60000.
<4>[85572.810000] CLK_PWM0_EN =1.
<4>[85572.810000] CLK_PWM1_EN = 1.
<4>[85572.810000] CLK_PWM2_EN = 1.
<4>[85572.810000] CLK_PWM3_EN = 1.
<4>[85572.810000] ##: GR_BUSCLK_ALM = 0358d1de.
<4>[85572.810000] ARM_VB_MCLKON =1.
<4>[85572.810000] ARM_VB_DA0ON = 1.
<4>[85572.810000] ARM_VB_DA1ON = 1.
<4>[85572.810000] ARM_VB_ADCON = 1.
<4>[85572.810000] ARM_VB_ANAON = 1.
<4>[85572.810000] ARM_VB_ACC = 1.
<4>[85572.810000] ##: AHB_CTL0 = 18280048.
<4>[85572.810000] AHB_CTL0_LCDC_EN =1.
<4>[85572.810000] AHB_CTL0_SDIO1_EN =1.
<4>[85572.811000] AHB_CTL0_DMA_EN =1.
<4>[85572.811000] AHB_CTL0_G3D_EN =1.
<4>[85572.811000]
<4>[85572.811000] ===========================
<4>[85572.811000] ##: ANA_LDO_PD_CTL0 = d555.
<4>[85572.811000] ##: LDO_BPVB_CTL is on.
<4>[85572.811000] ##: ANA_LDO_PD_CTL1 = 01a2.
<4>[85572.811000] ##: LDO_SDIO1_CTL is on.
<4>[85572.811000] ##: LDO_BPWIF0_CTL is not off.
<4>[85572.811000] ##: LDO_BPWIF1_CTL is on.
<4>[85572.811000] ##: LDO_SIM2_CTL is on.
<4>[85572.811000]
<4>[85572.811000] ===========================
<4>[85572.811000] ##: ANA_AUDIO_PA_CTRL0 = 0182.
<4>[85572.811000] ##: ANA_AUDIO_PA_CTRL1 = 1242.
<4>[85572.811000]
<4>[85572.811000] ===========================
<4>[85572.811000] ##: show clock info:
<4>[85572.811000] ###: clock[ext_32k] is active now, [flags = 00000802] [usecount = 1].
<4>[85572.811000] ###: clock[ext_26m] is active now, [flags = 00000802] [usecount = 7].
<4>[85572.811000] ###: clock[mpll_ck] is active now, [flags = 00000800] [usecount = 1].
<4>[85572.811000] ###: clock[dpll_ck] is active now, [flags = 00000800] [usecount = 1].
<4>[85572.811000] ###: clock[tdpll_ck] is active now, [flags = 00000002] [usecount = 1].
<4>[85572.811000] ###: clock[l3_192m] is active now, [flags = 00000002] [usecount = 1].
<4>[85572.811000] ###: clock[clk_96m] is active now, [flags = 00000002] [usecount = 1].
<4>[85572.811000] ###: clock[clk_lcdc] is active now, [flags = 00000000] [usecount = 1].
<4>[85572.811000] ###: clock[clk_uart0] is active now, [flags = 00000000] [usecount = 1].
<4>[85572.812000] ###: clock[clk_uart1] is active now, [flags = 00000000] [usecount = 1].
<4>[85572.812000] ###: clock[clk_uart2] is active now, [flags = 00000000] [usecount = 1].
<6>[85572.812000] active wake lock pm_message_wakelock
<6>[85572.812000] active wake lock mmc_delayed_work
<6>[85572.812000] active wake lock PowerManagerService
<6>[85572.812000] active wake lock AudioOutLock
<6>[85572.812000] active wake lock prox_delayed_work
<6>[85572.812000] active wake lock main
<6>[85572.812000] active wake lock alarm_rtc, time left 51
<6>[85572.812000] active wake lock event3-141, time left 486
<4>[85572.812000] ##: Some locks are being holded.
<4>[85572.865000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<6>[85573.432000] rtc alarm set at 1462304839, now 1462304825, rtc delta 0.493000002
<4>[85573.456000] vbc hardware nosie current mute dac now!
<4>[85573.457000] vbc power to 0x00000004
<4>[85573.457000] ---- vbc mute all pa ----
<4>[85573.808000] UniFi SDIO Driver: 5.0.0erp4 Jan 18 2013 16:01:39
<4>[85573.808000] CSR SME with WEXT support
<4>[85573.808000] Kernel 2.6.35
<4>[85573.808000] UniFi: Using native Linux MMC driver for SDIO.
<4>[85573.808000] CsrWifiCardPower:1357, power=0
<4>[85573.808000] CsrWifiCardPower:1357, power=1
<4>[85574.062000] sdhci_bus_scan, entry
<4>[85574.064000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[85574.065000] mmc1, clock_control:0x8007
<4>[85574.129000] mmc_sdio_init_card: old_card (null)
<4>[85574.129000] mmc_sdio_init_card: save_rca 1
<4>[85574.130000] mmc_sdio_init_card:336 About to select card cd68e400
<4>[85574.141000] mmc1, clock_control:0x107
<6>[85574.144000] mmc1: new high speed SDIO card at address 0001
<4>[85574.146000] sdio bus_id: mmc1:0001:1 - UniFi card 0x1 inserted
<4>[85574.150000] uf_glue_sdio_probe:1032 - take wake lock
<4>[85574.485000] CsrWifiRouterCtrlWifiOnReqHandler:761 - Take wake lock
<4>[85574.485000] CsrWifiRouterCtrlWifiOnReqHandler:766 Setting interface 0 to NONE
<4>[85574.485000] Unifi: Fetching firmware patch for firmware build 0
<6>[85574.485000] SDIO: Skip power on; card is already powered.
<4>[85574.488000] mmc1, clock_control:0x4007
<4>[85574.606000] mmc1, clock_control:0x407
<4>[85574.642000] Unifi: Firmware build 1089
<4>[85574.642000] Unifi: Fetching firmware patch for firmware build 1089
<4>[85576.645000] mmc resume deferred in mmc_blk_issue_rq
<4>[85576.645000] mmc0: Starting deferred resume
<4>[85576.645000] SDIO0: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[85576.646000] mmc0, clock_control:0x8007
<4>[85576.741000] CsrWifiRouterCtrlWifiOnResHandler:1181 - Release wake lock
<4>[85576.747000] mmc1, clock_control:0xe0107
<4>[85576.766000] mmc0, clock_control:0xe0107
<6>[85576.767000] mmc0: Deferred resume completed
<4>[85576.874000] mmc1, clock_control:0xe4007
<4>[85576.928000] mmc1, clock_control:0xe0107
<4>[85577.156000] mmc1, clock_control:0xe4007
<6>[85577.169000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[85577.262000] === mmc0: no requests, auto suspend host ===
<4>[85577.262000] SDIO0: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[85577.262000] === mmc: host auto-suspend done ===
<6>[85577.353000] rtc alarm set at 1462304832, now 1462304829, rtc delta 0.406000001
<4>[85577.428000] mmc1, clock_control:0xe0107

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD.XXKL3
ro.build.display.id=GINGERBREAD.XXKL3
ro.build.version.incremental=W12.20_P10_20130118.162556
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.1.9
ro.build.date=2013年 01月 18日星期五 16:41:01 CST
ro.build.display.eng_version=GLXT5Z_V007Cs20130118
ro.build.build_date=01/18/13
ro.build.build_time=16:41:01
ro.build.date.utc=1358498461
ro.build.type=user
ro.build.user=root-usr
ro.build.host=root-System-Product-Name
ro.build.tags=test-keys
ro.product.model=GT_I9300
ro.product.brand=samsung
ro.product.name=sprdroid_base
ro.product.device=hsdroid
ro.product.board=sp6820a
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=sprd
ro.wifi.channels=
ro.board.platform=sprdbp
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hsdroid
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sprdroid_base-user 4.1.9 GINGERBREAD.XXKL3 W12.20_P10_20130118.162556 test-keys
ro.build.fingerprint=samsung/sprdroid_base/hsdroid:4.1.9/GINGERBREAD.XXKL3/W12.20_P10_20130118.162556:user/test-keys
persist.sys.timezone=Asia/Shanghai
ro.product.locale.language=en
ro.product.locale.region=US
ro.msms.phone_count=1sim
# end build properties
#
# system.prop for hsdroid
#
#rild.libpath=/system/lib/libsp_ril.so
#wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 48
android.keylayout.sprd-keypad = /system/usr/keylayout/sprd-keypad.kl
android.keychar.sprd-keypad = /system/usr/keychars/sprd-keypad.kcm
ro.hardware =sphs
# Default network type
# 2 => AUTO Preferred.
ro.telephony.default_network = 2
# 1 => add volume control in in-call screen
ro.sprd.volume_control_icon = 1
ro.sf.lcd_density = 240
dalvik.vm.heapsize=32m
ro.opengles.version=131072
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.ringtone=OrganDub.ogg
ro.config.ringtone1=OrganDub.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

unifi_sdio 433576 2 - Live 0xbf156000
snd_dummy 9403 0 - Live 0xbf0e1000
mali 301806 4 - Live 0xbf086000
ump 54169 27 mali, Live 0xbf070000
headset 6559 0 - Live 0xbf069000
al3006_pls 12737 0 - Live 0xbf05f000
rda5802_fm 14534 0 - Live 0xbf055000
bk_fm 16068 0 - Live 0xbf04b000
msg2133 107350 0 - Live 0xbf02a000
ft5206_ts 12961 0 - Live 0xbf020000
yas_ori 4647 0 - Live 0xbf019000
yas530_mag 32299 0 - Live 0xbf00a000
bma250_acc 15709 0 - Live 0xbf000000

RAM: 512 MB (486 MB available)

System RAM: 230.000MB
System RAM: 256.000MB

Flash: 16 GB (14.906 GB actual); 0.5 GB (0.456 GB actual)

mmcblk0: 14.906 GB
mtdblock: 0.037 GB
mtdblock1: 0.456 GB

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:

触摸屏为 sprd GT_I9300

新电池 sprd GT_I9300

占地面积 sprd GT_I9300