1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
Аналогичное устройство в каталоге: Alps I3000
Основные характеристики | |
---|---|
Производитель | alps |
Модель | I3000 |
Версия Andriod | 4.0.3; eng.call2.1347623582; SDK15 |
Процессор | 1 core; ARMv7 Processor rev 10 (v7l); Max: 1001,0 MHz; Min: 166,8 MHz |
Дисплей | 800 x 480; DPI: 240; Evaluated Size: 3,9" |
Сенсорный экран | NOT multitouch 1 point |
Графический ускоритель | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
ОЗУ | 512 MB (484 MB available) |
Память | 16 GB (14.491 GB actual); 0.5 GB (0.472 GB actual) (см. вкладку "Память") |
Связь | |
Телефон | GSM; Net: GPRS |
WiFi | wlan; IEEE 802.11 a/b/g/n; MediaTek MT6620; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 4.0+HS |
GPS | Yes |
Установленные компоненты | |
Главная камера | Photo: 1.9 MP; Max: 1600x1200; Focus: infinity; Flash modes: auto on off torch |
Доп. камера | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; Flash modes: off |
Датчики | bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Вибратор | Yes |
Языки | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Аккумулятор | Technology: Li-ion; Voltage: 3793 |
FM radio | 76 to 108MHz |
SD Version: | 1.0 4 |
KERNEL: Linux version 3.0.13 (gcc version 4.4.3 (GCC) ) #1 PREEMPT Fri Sep 14 19:52:45 CST 2012
CODENAME: REL
Mainboard: simcom75_cu_ics
BRAND: alps
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: simcom75_cu_ics
DISPLAY: I3000_4.0_v1.0_b03
FINGERPRINT: alps/simcom75_cu_ics/simcom75_cu_ics:4.0.3/IML74K/1347623582:user/test-keys
HARDWARE: mt6575
ID: IML74K
TAGS: test-keys
Processor : ARMv7 Processor rev 10 (v7l)
BogoMIPS : 1993.93
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : MT6575
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[345381.599540] [18142:Thread-1245] exit
<7>[345381.611784] [18147:Thread-1247] exit
<7>[345381.630297] [18152:dmesg] exit
<7>[345381.630462] [18152:dmesg] sig 17 to [18150:AsyncTask #2]
<7>[345381.651329] [290:WifiStateMachin] fork err at pid
<7>[345381.651355] [290:WifiStateMachin] fork [18153:WifiStateMachin]
<7>[345381.651578] [18153:WifiStateMachin] set proc[18153] name: ->[Thread-1852]
<7>[345381.665871] [245:er.ServerThread] fork err at pid
<7>[345381.665897] [245:er.ServerThread] fork [18154:er.ServerThread]
<6>[345381.694865] [WLAN] rfkill_set_block(blocked 0)
<6>[345381.694877] [WLAN] Power on
<3>[345381.694892] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[345381.695686] [STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[345381.695740] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[345381.696849] [WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(not defined)
<3>[345381.697599] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO12)
<3>[345381.698302] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[345381.699093] [WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[345381.699797] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[345381.700555] [WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<7>[345381.701739] [18154:er.ServerThread] set proc[18154] name: ->[Thread-1853]
<7>[345381.704447] [18154:Thread-1853] exit
<3>[345381.704504] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[345381.705266] [WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[345381.706033] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[345381.729651] [WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[345381.730397] [WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[345381.732243] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[345381.732974] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[345381.733699] [WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[345381.734446] [WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[345381.735629] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO72)
<3>[345381.736379] [WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO185)
<3>[345381.737137] [WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[345381.738210] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[345381.739054] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[345381.739851] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[345381.740744] [WMT-PLAT][I]wmt_plat_ldo_ctrl:WMT-PLAT:LDO is not used
<3>[345381.950968] [WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[345381.951736] [WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT6620]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[345381.953344] [WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<3>[345381.954304] [WMT-LIB][I]wmt_lib_ps_handler:MT6620 Not Ready, Dont Send Sleep/Wakeup Command
<4>[345381.955347] [STP-PSM] [E]_stp_psm_notify_stp(990):ERROR! Invalid Action!!
<4>[345381.955353]
<3>[345381.956396] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[345381.957492] [WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[345381.958392] [WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[345381.959247] [WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[345381.963847] mt6575_get_bus_freq() return 192400
<3>[345381.964710] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[345381.965463] Flush type = 4 Rx Queue
<3>[345381.966065] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[345381.966873] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[345381.966884] [STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[345381.967535] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[345381.968465] [STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[345381.969163] [STP-PSM] [I]_stp_psm_set_state: work_state = ACT --> ACT
<6>[345381.969977] [STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[345381.969987] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[345381.969998] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[345381.975491] [WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6620)
<3>[345381.981930] [WMT-IC][I]mt6620_ver_check:MT6620: read hw_ver (hw version) (0x8a11)
<3>[345381.988312] [WMT-IC][I]mt6620_ver_check:MT6620: read fw_ver (rom version) (0x8a10)
<3>[345381.989259] [WMT-IC][I]mt6620_find_wmt_ic_info:found ic info(0x8a11) by full match! index:3
<3>[345381.990310] [WMT-IC][I]mt6620_ver_check:MT6620: wmt ic info: MT6620.E4 (0x8a11, WMTHWVER:3, patch_ext:_e3)
<3>[345381.991569] [WMT-CORE][I]wmt_core_hw_check:chip id(0x6620) ver_check ok
<3>[345382.004346] [WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[345382.005168] [WMT-IC][I]mt6620_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[345382.007835] [WMT-IC][I]mt6620_update_patch_name:full firmware patch name: /system/etc/firmware/mt6620_patch_e3_hdr.bin
<3>[345382.012309] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[345382.013269] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Built Time = 20120320180900
<3>[345382.014221] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[345382.015033] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[345382.015846] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Ph Ver = 0x001b
<3>[345382.016658] [WMT-IC][I]mt6620_patch_dwn:[Combo Patch] Platform = 1212
<3>[345382.017469] [WMT-IC][I]mt6620_patch_dwn:===========================================
<3>[345382.341624] [WMT-IC][I]mt6620_patch_dwn:wmt_core: patch dwn:0 frag(43, 752) ok
<3>[345382.342569] [WMT-IC][I]mt6620_sw_init:Not to check the patch validity
<3>[345382.343745] [WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf142e40)
<3>[345382.348323] [WMT-IC][I]mt6620_sw_init:init_coex ok
<6>[345382.349322] [STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[345382.349334] [STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<3>[345382.349346] [WMT-IC][I]mt6620_sw_init:enable host STP-UART-FULL mode
<3>[345382.363028] [WMT-IC][I]mt6620_sw_init:set fm mode (2) ok
<6>[345382.363695] [STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[345382.363707] [STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[345382.363718] mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[345382.364399] board_sdio_ctrl force off before on
<6>[345382.364405] mtk_wcn_cmb_sdio_off (3)
<6>[345382.364444] mtk_wcn_cmb_sdio_on (3)
<3>[345382.364478] msdc3 -> USR Resume <- msdc_pm() : L<1454> PID
<3>[345382.381129] msdc3 -> ================ <- msdc_set_mclk() : L<760> PID
<3>[345382.382169] msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<762> PID
<3>[345382.383822] msdc3 -> ================ <- msdc_set_mclk() : L<763> PID
<3>[345382.408274] msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1515> PID
<3>[345382.430045] msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<3442> PID
<3>[345382.431223] msdc3 -> ================ <- msdc_set_mclk() : L<760> PID
<3>[345382.432259] msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<762> PID
<3>[345382.433934] msdc3 -> ================ <- msdc_set_mclk() : L<763> PID
<6>[345382.438868] mmc1: new high speed SDIO card at address 0001
<6>[345382.440386] [WMT-DFT][I]hif_sdio_probe:start!
<6>[345382.440403] [WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x20a) num(0x1)
<6>[345382.440413] [WMT-DFT][I]hif_sdio_probe:card->info[0]: MediaTek MT6620 Wireless Combo Chip
<6>[345382.440423] [WMT-DFT][I]hif_sdio_probe:card->info[1]:
<6>[345382.440431] [WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[345382.440519] [WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(520192)
<7>[345382.440546] WQ_WARN: cpu:1, proc:kworker/u:1, dur: 71209307 > 8ms
<7>[345382.440568] work: mmc_rescan+0x0/0x370
<6>[345382.520968] [WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[345382.521063] [2:kthreadd] fork err at pid
<7>[345382.521085] [2:kthreadd] fork [18155:kthreadd]
<6>[345382.521108] [WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[345382.521139] [wlan] net_device prDev(0xd0841000) allocated
<5>[345382.522833] [wlan] Open FW image: WIFI_RAM_CODE done
<4>[345382.523582] [RT_MONITOR]WARNNING [18155:ksdioirqd/mmc1] SET NOT ALLOW RT Prio [1] for proc [18155:ksdioirqd/mmc1]
<4>[345382.525257] Backtrace:
<4>[345382.525638] [
<4>[345382.526777] r7:00000001 r6:00000000 r5:cde22000 r4:cf1b4400
<4>[345382.527693] [
<4>[345382.528892] [
<4>[345382.530185] [
<4>[345382.531442] [
<4>[345382.532558] [
<4>[345382.533553] r7:00000013 r6:c0088df8 r5:c00a0478 r4:dd3ddd78
<5>[345382.546647] [wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[345382.547489] [wlan] Virtual Address = e1528000 for COMMON MGMT MEMORY POOL.
<5>[345382.548342] [wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[345382.549034] [wlan] Virtual Address = e152a000 for SW_RFB_T.
<5>[345382.549725] [wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[345382.550425] [wlan] Virtual Address = e152e000 for MSDU_INFO_T.
<6>[345382.551201] [wlan] wlanAdapterStart(): Acquiring LP-OWN
<6>[345382.572184] [wlan] Chip ID: 0x6620
<6>[345382.572199] [wlan] Revision ID: 0x1
<6>[345383.226554] [wlan] wlanAdapterStart(): Waiting for Ready bit..
<7>[345383.313380] [18144:com.specdevice] exit
<6>[345383.461039] [wlan] Ready bit asserted
<5>[345383.502566] [wlan] [wifi] wlan%d netif_carrier_off
<6>[345383.503253] [wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[345383.503325] [wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[345383.503429] [wlan] Domain: map=0, idx=0, code=0x0000
<7>[345383.504336] [2:kthreadd] fork err at pid
<7>[345383.504359] [2:kthreadd] fork [18156:kthreadd]
<5>[345383.504391] [wlan] tx_thread starts running...
<6>[345383.506059] [WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(20a) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[345383.506072] [WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[345383.506089] [WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[345383.507426] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable==============================>
<4>[345383.507434]
[STP-PSM] [I]_stp_psm_dump_active_q: Active op list:++
<4>[345383.509230] [STP-PSM] [I]_stp_psm_dump_active_q: STP_OPID_PSM_WAKEUP
<4>[345383.510031] [STP-PSM] [I]_stp_psm_dump_active_q: Active op list:--
<4>[345383.517786] [STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<4>[345383.518847] [STP-PSM] [I]_stp_psm_notify_wmt_wakeup_wq: OPID(1) type(0) bRet(1)
<4>[345383.518854]
<4>[345383.519968] [STP-PSM] [I]_stp_psm_do_wait: +Total waits for ACT takes 0 msec
<4>[345383.520864] [STP-PSM] [I]_stp_psm_enable: PSM MODE Enable<=============================
<4>[345383.520870]
<3>[345383.522369] [WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<7>[345383.524853] [18153:Thread-1852] exit
<7>[345383.533429] [17790:kworker/u:1] fork err at pid
<7>[345383.533453] [17790:kworker/u:1] fork [18157:kworker/u:1]
<7>[345383.533804] [18157:kworker/u:1] fork err at pid
<7>[345383.533825] [18157:kworker/u:1] fork [18158:kworker/u:1]
<7>[345383.533867] [18158:kworker/u:1] exit
<7>[345383.533892] [18158:kworker/u:1] sig 17 to [18157:kworker/u:1]
<7>[345383.533924] [18157:kworker/u:1] exit
<6>[345383.534446] [RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[345383.534467] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[345383.551923] [1:init] fork err at pid
<7>[345383.551956] [1:init] fork [18159:init]
<7>[345383.553115] [290:WifiStateMachin] fork err at pid
<7>[345383.553140] [290:WifiStateMachin] fork [18160:WifiStateMachin]
<7>[345383.553568] WQ_WARN: cpu:0, proc:kworker/0:2, dur: 19015923 > 8ms
<7>[345383.553639] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[345383.553680] [18160:WifiStateMachin] set proc[18160] name: ->[WifiMonitor]
<7>[345383.555598] [18159:init] set proc[18159] name: ->[logwrapper]
<7>[345383.558582] [18159:logwrapper] fork err at pid
<7>[345383.558613] [18159:logwrapper] fork [18161:logwrapper]
<7>[345383.559842] [18161:logwrapper] set proc[18161] name: ->[wpa_supplicant]
<7>[345383.763837] [18037:IntentService[D] exit
<5>[345384.154972] [wlan] N=0 closed
<5>[345384.155356] [wlan] EVENT-ROAMING ABORT: Current Time = 344841410
<5>[345384.156106] [wlan] [13] TRANSITION: [0] -> [0]
<6>[345384.160068] [wlan] NAF=0,0,0
<6>[345384.160082] [wlan] NAF=0,0,0
<5>[345384.325560] [wlan] [13] TRANSITION: [0] -> [2]
<7>[345384.469538] WQ_WARN: cpu:0, proc:kworker/0:2, dur: 8528538 > 8ms
<7>[345384.469561] work: hwmsen_work_func+0x0/0x47c
<5>[345384.653216] [wlan] [13] TRANSITION: [2] -> [0]
<6>[345384.659134] [wlan] NAF=0,0,0
<5>[345384.659940] [wlan] N=0 closed
<5>[345384.660336] [wlan] EVENT-ROAMING ABORT: Current Time = 344841910
<5>[345384.664144] [wlan] [13] TRANSITION: [0] -> [0]
<5>[345384.664750] [wlan] [13] TRANSITION: [0] -> [1]
<5>[345384.665316] [wlan] [13] TRANSITION: [1] -> [6]
<5>[345384.665872] [wlan] ChReq net=0 token=1 b=1 c=11 s=3
<6>[345384.669209] [wlan] NAF=0,0,0
<5>[345384.669224] [wlan] ChGrant net=0 token=1 ch=11 sco=3
<5>[345384.669958] [wlan] [13] TRANSITION: [6] -> [7]
<5>[345384.670525] [wlan] STA 40mAllowed=1
<6>[345384.671116] [wlan] Wait Cmd TxSeqNum:1
<6>[345384.678975] [wlan] EVENT_ID_TX_DONE PacketSeq:1 ucStatus: 0 SN: 26
<6>[345384.680638] [wlan] Wait Cmd TxSeqNum:2
<6>[345384.684226] [wlan] EVENT_ID_TX_DONE PacketSeq:2 ucStatus: 0 SN: 27
<6>[345384.684263] [wlan] QM: (fgIsWmmSupported=1, fgSupportQoS=1)
<6>[345384.684275] [wlan] QM: (fgIsWmmSupported=1, fgIsQoS=1)
<6>[345384.684286] [wlan] MQM: Assoc_Rsp Parsing (QoS Enabled=1)
<5>[345384.684307] [wlan] N=0 b=1 c=11 s=3 e=0 h=0 I=0x07 l=1 p=1
<5>[345384.684998] [wlan]
<4>[345384.685241] 00:4f:74:31:71:e8 [17] TRANSITION: [0] -> [3]
<4>[345384.685246]
<5>[345384.688713] [wlan] [wifi] wlan0 netif_carrier_on [ssid:AirLive MARIN 00:4f:74:31:71:e8]
<5>[345384.689714] [wlan] EVENT-ROAMING START: Current Time = 344841940
<5>[345384.690475] [wlan] [27] TRANSITION: [0] -> [1]
<5>[345384.693550] [wlan] [13] TRANSITION: [7] -> [10]
<6>[345384.697947] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<7>[345384.698109] WQ_WARN: cpu:0, proc:kworker/0:2, dur: 9405615 > 8ms
<7>[345384.698132] work: linkwatch_event+0x0/0x3c
<5>[345384.718937] [wlan] QM: +STA[0]
<7>[345384.721969] WQ_WARN: cpu:0, proc:kworker/0:2, dur: 23817846 > 8ms
<7>[345384.722110] work: wlanSetMulticastListWorkQueue+0x0/0x1f4 [wlan]
<7>[345384.723751] [290:WifiStateMachin] fork err at pid
<7>[345384.723776] [290:WifiStateMachin] fork [18162:WifiStateMachin]
<7>[345384.723828] [18162:WifiStateMachin] set proc[18162] name: ->[DhcpStateMachin]
<6>[345384.731450] [wlan] eNetTypeIndex:0, ePwrMode:0, fgEnCmdEvent:1
<5>[345384.731476] [wlan] Set Wi-Fi PS mode to CAM (0)
<7>[345384.733919] [1:init] fork err at pid
<7>[345384.733953] [1:init] fork [18163:init]
<7>[345384.734954] [18163:init] set proc[18163] name: ->[logwrapper]
<7>[345384.736992] [18163:logwrapper] fork err at pid
<7>[345384.737018] [18163:logwrapper] fork [18164:logwrapper]
<7>[345384.737768] [18164:logwrapper] set proc[18164] name: ->[dhcpcd]
<7>[345384.747397] [18164:dhcpcd] fork err at pid
<7>[345384.747913] [18164:dhcpcd] fork [18165:dhcpcd]
<7>[345384.747952] [18165:dhcpcd] set proc[18165] name: ->[dhcpcd-run-hook]
<7>[345384.750882] [18165:dhcpcd-run-hook] fork err at pid
<7>[345384.750914] [18165:dhcpcd-run-hook] fork [18166:dhcpcd-run-hook]
<7>[345384.751160] yaffs: yaffs: userdata sync do_checkpoint 0,gc_urgent 1
<7>[345384.751171] yaffs: yaffs: userdata yaffs_FlushSuperBlock 0
<7>[345384.753512] [18166:dhcpcd-run-hook] set proc[18166] name: ->[ls]
<7>[345384.755765] [18166:ls] exit
<7>[345384.755887] [18166:ls] sig 17 to [18165:dhcpcd-run-hook]
<7>[345384.756334] [18165:dhcpcd-run-hook] fork err at pid
<7>[345384.756358] [18165:dhcpcd-run-hook] fork [18167:dhcpcd-run-hook]
<7>[345384.757495] [18167:dhcpcd-run-hook] set proc[18167] name: ->[ls]
<7>[345384.759815] [18167:ls] exit
<7>[345384.759938] [18167:ls] sig 17 to [18165:dhcpcd-run-hook]
<7>[345384.762570] [18165:dhcpcd-run-hook] fork err at pid
<7>[345384.762605] [18165:dhcpcd-run-hook] fork [18168:dhcpcd-run-hook]
<7>[345384.769933] [18168:dhcpcd-run-hook] set proc[18168] name: ->[ls]
<5>[345384.770731] [wlan] N=0 b=1 c=11 s=3 e=0 h=0 I=0x07 l=1 p=1
<7>[345384.773394] [18168:ls] exit
<7>[345384.773517] [18168:ls] sig 17 to [18165:dhcpcd-run-hook]
<7>[345384.774126] [18165:dhcpcd-run-hook] fork err at pid
<7>[345384.774152] [18165:dhcpcd-run-hook] fork [18169:dhcpcd-run-hook]
<7>[345384.774868] [18169:dhcpcd-run-hook] set proc[18169] name: ->[setprop]
<7>[345384.777314] [18169:setprop] exit
<7>[345384.777435] [18169:setprop] sig 17 to [18165:dhcpcd-run-hook]
<7>[345384.778148] [18165:dhcpcd-run-hook] fork err at pid
<7>[345384.778173] [18165:dhcpcd-run-hook] fork [18170:dhcpcd-run-hook]
<7>[345384.778909] [18170:dhcpcd-run-hook] set proc[18170] name: ->[ls]
<7>[345384.781709] [18170:ls] exit
<7>[345384.781875] [18170:ls] sig 17 to [18165:dhcpcd-run-hook]
<7>[345384.782180] [18165:dhcpcd-run-hook] exit
<7>[345384.782318] [18165:dhcpcd-run-hook] sig 17 to [18164:dhcpcd]
<7>[345384.782845] [18164:dhcpcd] fork err at pid
<7>[345384.783131] [18164:dhcpcd] fork [18171:dhcpcd]
<7>[345384.783168] [18171:dhcpcd] set proc[18171] name: ->[dhcpcd-run-hook]
<7>[345384.785554] [18171:dhcpcd-run-hook] fork err at pid
<7>[345384.785582] [18171:dhcpcd-run-hook] fork [18172:dhcpcd-run-hook]
<7>[345384.786278] [18172:dhcpcd-run-hook] set proc[18172] name: ->[ls]
<7>[345384.788506] [18172:ls] exit
<7>[345384.788630] [18172:ls] sig 17 to [18171:dhcpcd-run-hook]
<7>[345384.789068] [18171:dhcpcd-run-hook] fork err at pid
<7>[345384.789094] [18171:dhcpcd-run-hook] fork [18173:dhcpcd-run-hook]
<7>[345384.789775] [18173:dhcpcd-run-hook] set proc[18173] name: ->[ls]
<7>[345384.792211] [18173:ls] exit
<7>[345384.792344] [18173:ls] sig 17 to [18171:dhcpcd-run-hook]
<7>[345384.793369] [18171:dhcpcd-run-hook] fork err at pid
<7>[345384.793395] [18171:dhcpcd-run-hook] fork [18174:dhcpcd-run-hook]
<7>[345384.794116] [18174:dhcpcd-run-hook] set proc[18174] name: ->[ls]
<7>[345384.796514] [18174:ls] exit
<7>[345384.796645] [18174:ls] sig 17 to [18171:dhcpcd-run-hook]
<7>[345384.797216] [18171:dhcpcd-run-hook] fork err at pid
<7>[345384.797242] [18171:dhcpcd-run-hook] fork [18175:dhcpcd-run-hook]
<7>[345384.797961] [18175:dhcpcd-run-hook] set proc[18175] name: ->[setprop]
<7>[345384.800393] [18175:setprop] exit
<7>[345384.800526] [18175:setprop] sig 17 to [18171:dhcpcd-run-hook]
<7>[345384.801334] [18171:dhcpcd-run-hook] fork err at pid
<7>[345384.801359] [18171:dhcpcd-run-hook] fork [18176:dhcpcd-run-hook]
<7>[345384.802096] [18176:dhcpcd-run-hook] set proc[18176] name: ->[ls]
<7>[345384.804330] [18176:ls] exit
<7>[345384.804462] [18176:ls] sig 17 to [18171:dhcpcd-run-hook]
<7>[345384.804703] [18171:dhcpcd-run-hook] exit
<7>[345384.804814] [18171:dhcpcd-run-hook] sig 17 to [18164:dhcpcd]
<7>[345384.816730] [18150:AsyncTask #2] fork err at pid
<7>[345384.816760] [18150:AsyncTask #2] fork [18177:AsyncTask #2]
<7>[345384.824960] [18177:AsyncTask #2] set proc[18177] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=I3000_4.0_v1.0_b03
ro.build.hardware.display.id=MT000_V1.03_PCB
ro.build.version.incremental=eng.call2.1347623582
ro.custom.build.version=1347623582
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=2012年 09月 14日 星期五 19:55:11 CST
ro.build.date.utc=1347623711
ro.build.type=user
ro.build.user=call2
ro.build.host=call2-srv2
ro.build.tags=test-keys
ro.product.model=I3000
ro.product.brand=alps
ro.product.name=simcom75_cu_ics
ro.product.device=simcom75_cu_ics
ro.product.board=simcom75_cu_ics
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=simcom75_cu_ics
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=simcom75_cu_ics-user 4.0.3 IML74K eng.call2.1347623582 test-keys
ro.build.fingerprint=alps/simcom75_cu_ics/simcom75_cu_ics:4.0.3/IML74K/1347623582:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=I3000_4.0_v1.0_b01
ro.mediatek.platform=MT6575
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
# USB Config Type
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=180
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
drm.service.enabled=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan 285360 0 - Live 0xbf1f9000 (P)
cfg80211 122425 0 - Live 0xbf1d0000
mtk_fm_priv 8909 0 - Live 0xbf1ca000 (P)
mt6620_fm_drv 110874 1 mtk_fm_priv, Live 0xbf1a2000
mtk_stp_bt 39718 0 - Live 0xbf195000
mtk_stp_gps 37190 0 - Live 0xbf188000
mtk_stp_uart 21669 1 - Live 0xbf17f000 (P)
mtk_stp_wmt 343310 7 wlan,mtk_fm_priv,mt6620_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11e000 (P)
mtk_hif_sdio 18042 2 wlan,mtk_stp_wmt, Live 0xbf115000
devinfo 748 0 - Live 0xbf111000 (P)
sec 109563 0 - Live 0xbf0f0000 (P)
mt6575_vcodec_kernel_driver 23817 2 - Live 0xbf0e5000 (P)
mt6575_m4u 108821 8 - Live 0xbf0c1000 (P)
ccmni 17214 0 - Live 0xbf0b8000 (P)
ccci 139276 15 ccmni, Live 0xbf08a000 (P)
ccci_plat 125364 3 sec,ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb 5115 0 - Live 0xbf05e000 (P)
mtklfb 23522 0 - Live 0xbf054000
pvrsrvkm 232835 93 mtklfb, Live 0xbf00d000
alps_core 2221 0 - Live 0xbf009000 (P)
aed 15834 3 - Live 0xbf000000 (P)
RAM: 512 MB (484 MB available)
System RAM: 484.000MB
mtkfb.0: 6.000MB
Flash: 16 GB (14.491 GB actual); 0.5 GB (0.472 GB actual)
mmcblk0: 14.491 GB
mtdblock: 0.018 GB
mtdblock1: 0.472 GB
Тачскрин для alps I3000
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
Новый аккумулятор для alps I3000
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Чехлы для alps I3000
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Найти похожие устройства | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |