sanei N10 Especificación

General
Detalles OS
CPU info
GPU extensiones
Mensajes del kernel WiFi
build.prop
Módulos
Mapa de la memoria

Especificaciones generales
Marca	sanei
Modelo	N10
Versión de Android	4.0.3; 4.0.1111; SDK15
CPU	1 core; ARMv7 Processor rev 2 (v7l) exDroid; Max: 1008.0 MHz; Min: 60.0 MHz
Pantalla	1280 x 800; DPI: 160; Evaluated Size: 9.4"
Pantalla táctil	Multitouch 10 points
GPU	Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM	1024 MB (960 MB available)
Flash	16 GB Build-in (14.843 GB actual); 16 GB (14.518 GB actual)
Comunicaciones
Teléfono	None
WiFi	8192cu; IEEE 802.11 b/g/n; RealtekRTL8188/92; AP Mode
USB Host	Yes
Bluetooth	Yes
GPS	Yes
Funciones avanzadas
Cámara frontal	Photo: 1.9 MP; Max: 1600x1200; Video: 0.3 MP; Max: 640x480; Focus: auto; No flash
Cámara trasera	Photo: 1.9 MP; Max size: 1600x1200; Video: 0.3 MP; Max: 640x480; Focus: auto; No flash
Sensores	BMA250 3-axis Accelerometer (Bosch); range: 0...39.24; resolution: 0.038 (0.098%); power: 0.2mA;
Alarma vibrante	Yes
Idiomas soportados	40; Arabic; Bulgarian; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Vietnamese; Chinese
Batería	Technology: LiFe; Voltage: 4026
External USB Ethernet	Realtek 8150 based adapters; MCS7830 based adapters
SD Version:	1.1 7

KERNEL: Linux version 3.0.8+ (build@emma9) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #2 PREEMPT Mon Sep 10 11:40:56 CST 2012
CODENAME: REL
Mainboard: crane
BRAND: softwinners
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: crane-anpei
DISPLAY: crane_anpei101sy-user-r4.0.3.4.0.1111
FINGERPRINT: softwinners/crane_anpei101sy/crane-anpei:4.0.3/IML74K/4.0.1111:user/test-keys
HARDWARE: sun4i
ID: IML74K
TAGS: test-keys

Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
Serial : 014244d4515548488071825316236719

GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer

<7>[ 1046.791317] -r871xu_dev_remove, done
<7>[ 1046.791471] -rtw_drv_halt
<7>[ 1046.791478] sw_usb_disable_hcd: usbc_num = 2
<7>[ 1046.791487] [sw-ehci2]: sw_usb_disable_ehci
<7>[ 1046.791499] [sw-ehci2]: remove, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0878508
<6>[ 1046.791513] sw-ehci sw-ehci.2: remove, state 1
<6>[ 1046.791542] usb usb4: USB disconnect, device number 1
<6>[ 1046.791551] usb 4-1: USB disconnect, device number 2
<6>[ 1046.801203] sw-ehci sw-ehci.2: USB bus 4 deregistered
<7>[ 1046.801226] [sw-ehci2]: close clock
<7>[ 1046.801260] [sw-ohci2]: sw_usb_disable_ohci
<7>[ 1046.801272] [sw-ohci2]: remove, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc087861c
<6>[ 1046.801283] sw-ohci sw-ohci.2: remove, state 1
<6>[ 1046.801310] usb usb5: USB disconnect, device number 1
<6>[ 1046.801750] sw-ohci sw-ohci.2: USB bus 5 deregistered
<7>[ 1046.801768] [sw-ohci2]: Set USB Power OFF
<7>[ 1046.801777] [sw-ohci2]: close clock
<7>[ 1047.489080] sw_usb_enable_hcd: usbc_num = 2
<7>[ 1047.489097] [sw-ehci2]: sw_usb_enable_ehci
<7>[ 1047.489110] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0878508
<7>[ 1047.489125] [sw-ehci2]: open clock
<7>[ 1047.535858] [sw-ehci2]: Set USB Power ON
<6>[ 1047.535880] sw-ehci sw-ehci.2: SW USB2.0 `Enhanced` Host Controller (EHCI) Driver
<6>[ 1047.535922] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
<6>[ 1047.536048] sw-ehci sw-ehci.2: irq 40, io mem 0xf1c1c000
<6>[ 1047.564104] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
<7>[ 1047.569520] ehci_irq: port change detect
<6>[ 1047.578407] hub 4-0:1.0: USB hub found
<6>[ 1047.582574] hub 4-0:1.0: 1 port detected
<7>[ 1047.587440] [sw-ohci2]: sw_usb_enable_ohci
<7>[ 1047.591642] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc087861c
<7>[ 1047.604232] [sw-ohci2]: open clock
<6>[ 1047.628072] sw-ohci sw-ohci.2: SW USB2.0 `Open` Host Controller (OHCI) Driver
<6>[ 1047.639978] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
<6>[ 1047.647149] sw-ohci sw-ohci.2: irq 65, io mem 0xf1c1c400
<6>[ 1047.718712] hub 5-0:1.0: USB hub found
<6>[ 1047.718746] hub 5-0:1.0: 1 port detected
<7>[ 1047.719637] rtw driver version=v3.4.1_3418.20120217
<7>[ 1047.719647] Build at: Sep 10 2012 11:11:54
<7>[ 1047.719654] ##########rtw_suspend_lock_init ###########
<6>[ 1047.720325] usbcore: registered new interface driver rtl8192cu
<6>[ 1047.900090] usb 4-1: new high speed USB device number 2 using sw-ehci
<7>[ 1048.065684] register rtw_netdev_ops to netdev_ops
<7>[ 1048.065701] rtw_wdev_alloc
<7>[ 1048.065996] CHIP TYPE: RTL8188C_8192C
<7>[ 1048.066010]
<7>[ 1048.066013] usb_endpoint_descriptor(0):
<7>[ 1048.066020] bLength=7
<7>[ 1048.066025] bDescriptorType=5
<7>[ 1048.066030] bEndpointAddress=81
<7>[ 1048.066036] wMaxPacketSize=200
<7>[ 1048.066041] bInterval=0
<7>[ 1048.066049] RT_usb_endpoint_is_bulk_in = 1
<7>[ 1048.066055]
<7>[ 1048.066058] usb_endpoint_descriptor(1):
<7>[ 1048.066064] bLength=7
<7>[ 1048.066069] bDescriptorType=5
<7>[ 1048.066074] bEndpointAddress=2
<7>[ 1048.066079] wMaxPacketSize=200
<7>[ 1048.066085] bInterval=0
<7>[ 1048.066090] RT_usb_endpoint_is_bulk_out = 2
<7>[ 1048.066096]
<7>[ 1048.066099] usb_endpoint_descriptor(2):
<7>[ 1048.066105] bLength=7
<7>[ 1048.066110] bDescriptorType=5
<7>[ 1048.066115] bEndpointAddress=3
<7>[ 1048.066120] wMaxPacketSize=200
<7>[ 1048.066126] bInterval=0
<7>[ 1048.066131] RT_usb_endpoint_is_bulk_out = 3
<7>[ 1048.066137]
<7>[ 1048.066140] usb_endpoint_descriptor(3):
<7>[ 1048.066145] bLength=7
<7>[ 1048.066150] bDescriptorType=5
<7>[ 1048.066156] bEndpointAddress=84
<7>[ 1048.066161] wMaxPacketSize=40
<7>[ 1048.066166] bInterval=1
<7>[ 1048.066172] RT_usb_endpoint_is_int_in = 4, Interval = 1
<7>[ 1048.066180] nr_endpoint=4, in_num=2, out_num=2
<7>[ 1048.066185]
<7>[ 1048.066189] USB_SPEED_HIGH
<7>[ 1048.068157] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
<7>[ 1048.068170] RF_Type is 3!!
<7>[ 1048.068591] EEPROM type is E-FUSE
<7>[ 1048.068599] ====> ReadAdapterInfo8192C
<7>[ 1048.068718] Boot from EFUSE, Autoload OK !
<7>[ 1048.358608] EEPROMVID = 0x0bda
<7>[ 1048.358618] EEPROMPID = 0x8176
<7>[ 1048.358624] EEPROMCustomerID : 0x00
<7>[ 1048.358630] EEPROMSubCustomerID: 0x00
<7>[ 1048.358636] RT_CustomerID: 0x00
<7>[ 1048.358649] _ReadMACAddress MAC Address from EFUSE = 00:e3:6e:99:9a:8c
<7>[ 1048.358661] EEPROMRegulatory = 0x0
<7>[ 1048.358667] _ReadBoardType(0)
<7>[ 1048.358674] BT Coexistance = disable
<7>[ 1048.358681] RT_ChannelPlan: 0x02
<7>[ 1048.358689] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
<7>[ 1048.358699] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<7>[ 1048.358706] ### AntDivCfg(0)
<7>[ 1048.358713] readAdapterInfo_8192CU(): REPLACEMENT = 1
<7>[ 1048.358722] <==== ReadAdapterInfo8192C in 290 ms
<7>[ 1048.359810] rtw_register_early_suspend
<7>[ 1048.359855] rtw_macaddr_cfg MAC Address = 00:e3:6e:99:9a:8c
<7>[ 1048.359866] MAC Address from pnetdev->dev_addr= 00:e3:6e:99:9a:8c
<7>[ 1048.363903] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<7>[ 1048.480454] +871x_drv - drv_open, bup=0
<7>[ 1048.489092] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
<7>[ 1048.500170] FirmwareDownload92C accquire FW from embedded image
<7>[ 1048.506141] fw_ver=v79, fw_subver=0, sig=0x88c0
<7>[ 1048.563480] fw download ok!
<7>[ 1048.563496] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<7>[ 1048.977176] IQK:Start!!!
<7>[ 1048.993233] Path A IQK Success!!
<7>[ 1049.004726] Path A IQK Success!!
<7>[ 1049.009351] IQK: final_candidate is 0
<7>[ 1049.009364] IQK: RegE94=101 RegE9C=f RegEA4=fe RegEAC=2 RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
<7>[ 1049.009373] Path A IQ Calibration Success !
<7>[ 1049.124234] pdmpriv->TxPowerTrackControl = 1
<7>[ 1049.129107] MAC Address from REG_MACID = 00:e3:6e:99:9a:8c
<7>[ 1049.129119] rtl8192cu_hal_init in 640ms
<7>[ 1049.129131] MAC Address = 00:e3:6e:99:9a:8c
<7>[ 1049.180578] rtw_cfg80211_init_wiphy:rf_type=3
<7>[ 1049.184959] -871x_drv - drv_open, bup=1
<7>[ 1049.232952] cfg80211_rtw_set_power_mgmt
<6>[ 1049.234082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<7>[ 1049.234171] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
<7>[ 1049.234199] set_mode = IW_MODE_INFRA
<7>[ 1049.275548] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IML74K
ro.build.display.id=crane_anpei101sy-user-r4.0.3.4.0.1111
ro.build.version.incremental=4.0.1111
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Mon Sep 10 11:03:58 CST 2012
ro.build.date.utc=1347246238
ro.build.type=user
ro.build.user=build
ro.build.host=emma9
ro.build.tags=test-keys
ro.product.model=N10
ro.product.brand=softwinners
ro.product.name=crane_anpei101sy
ro.product.device=crane-anpei
ro.product.board=crane
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=crane-anpei
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=crane_anpei101sy-user 4.0.3 IML74K 4.0.1111 test-keys
ro.build.fingerprint=softwinners/crane_anpei101sy/crane-anpei:4.0.3/IML74K/4.0.1111:user/test-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.mode=DISABLED
persist.sys.usb.config=mass_storage,adb
persist.service.adb.enable=0
ro.sf.lcd_density=160
ro.product.firmware=4.0.11
persist.sys.themeId=A10
persist.sys.themePackageName=com.letou.theme.a10
hwui.render_dirty_regions=false
hw.sys.product_config=true
hw.sys.product_input_key_method=true
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.kernel.android.checkjni=0
persist.sys.timezone=Asia/Shanghai
persist.sys.language=zh
persist.sys.country=CN
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

8192cu 566489 0 - Live 0xbf1e3000
rtl8150 8910 0 - Live 0xbf0aa000
mcs7830 6557 0 - Live 0xbf0a4000
qf9700 8513 0 - Live 0xbf09d000
asix 22500 0 - Live 0xbf092000
usbnet 23745 3 mcs7830,qf9700,asix, Live 0xbf086000
sun4i_csi0 26905 0 - Live 0xbf07b000
gc0308b 14280 1 - Live 0xbf073000
gc0308 14280 1 - Live 0xbf06b000
videobuf_dma_contig 5659 1 sun4i_csi0, Live 0xbf066000
videobuf_core 18067 2 sun4i_csi0,videobuf_dma_contig, Live 0xbf05c000
sun4i_vibrator 2278 0 - Live 0xbf058000
bma250 6806 0 - Live 0xbf052000
mali 130339 12 - Live 0xbf025000
ump 42266 17 mali, Live 0xbf014000
hv2605 4541 0 - Live 0xbf00f000
ft5x_ts_anpei101 41817 0 - Live 0xbf000000

RAM: 1024 MB (960 MB available)

System RAM: 448.000MB
Mali Sdram: 64.000MB
System RAM: 512.000MB

Flash: 16 GB Build-in (14.843 GB actual); 16 GB (14.518 GB actual)

mmcblk0: 14.518 GB
nand: 14.843 GB

Pantalla táctil para sanei N10

$25.38 10.1 inch LCD Display For Ampe A10 LCD Sanei N10 LCD Screen without touch screen digitizer

$9.11 263*173mm 10.1 Inch for Sanei N10 Ampe A10 tablet pc capacitive touch screen glass digitizer panel TPC0323 VER1.0 Outer screen

$15.1 White Color 10.1" Capacitive Touch Screen Replacement For Sanei N10 AMPE A10 TPC0187 VER1.0, 263*172mm

Batería de repuesto para sanei N10

Fundas para sanei N10

$142.14 2023 New Original SANEI Trading Pokemon Sprigatito Plush toys Dolls Anime Soft Stuffed Toy Gifts For Children

$136.45 Original Pokemon Center fit series SANEI Tomy Cute Plush Dolls Toys Anime Soft Stuffed Toy Gifts For Children

$154.44 New Original Pokemon Center fit series SANEI Tomy Plush Dolls Anime Soft Stuffed Toy Gifts For Children

$10.29 New Sanei PP59 Mimikyu All Star Collection Stuffed 7" Plush Doll Toy

$16.47 Sanei All Star Collection Ampharos Stuffed Plush Toy 8"

$40.96 Sanei Pokemon ALL STAR COLLECTION Tinkaton S Plush Stuffed Toy 30cm Pokémon NEW

$45.84 10cm Anime Plush Doll Toy Manjiro Sano Ryuguji Ken Habumiya Ichiho Venue Keisuke Matsuno Chidori Sankilon Stuffed Toy Pendant

$27.31 Pokemon Sanei Alcremie Triple Mix & Milky Salt & Ruby Mix Plush Doll Oficial

$174.84 Japan Game Animal Crossing SANEI Tanukichi Shizue plush Toys Soft Stuffed Doll Gift for a girl

$118.49 Fuecoco Original Pokemon SANEI Plush Toy Soft Stuffed Animals Dolls Children's Birthday Gifts 19cm

$19.13 Sanei Pokemon All Star Collection Mewtwo Stuffed Plush Toy 10"

$156.24 New Original Pokemon SANEI Greninja Plush toys Dolls Anime Soft Stuffed Toy Gifts For Children

$17.79 Sanei Pokemon All Star Collection Suicune 8.5" Stuffed Plush Toy Authentic

$138 Original Pokemon SANEI Cyndaquil Plush toy Soft Stuffed Animals doll Children's Birthday Gifts

$13.01 New Sanei All Star Series PP20 Mew Stuffed Plush, 6.5"

$39.63 Sanei Pokemon ALL STAR COLLECTION Tinkaton (S) 30cm Plush Doll Stuffed Toy

$7.35 Sanei Pokemon All Star Collection Snorlax Stuffed Plush Toy, 8"

$28.79 Alcremie Triple Mix Plush Doll Sanei Boeki Nintendo Stuffed Toy 18cm PSL

$10.51 Sanei Pokemon All-Star series Snorlax stuffed toy, 11.8 inches (about 30 cm)

$104.96 Sanei Pokemon All Star Series Eevee Stuffed Plush Toy Home Decor Christmas Gift For Child Kids 13CM

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description: