- General
- Detalles OS
- CPU info
- GPU extensiones
- Mensajes del kernel WiFi
- build.prop
- Módulos
- Mapa de la memoria
Dispositivo similar en la base de datos: Alps N7102
Especificaciones generales | |
---|---|
Marca | alps |
Modelo | GT-N7102 |
Versión de Android | 4.1.9; eng.qiang.wang.1357784230; SDK15 |
CPU | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001,0 MHz; Min: 250,2 MHz |
Pantalla | 960 x 540; DPI: 240; Evaluated Size: 4,6" |
Pantalla táctil | Multitouch 5 points |
GPU | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
RAM | 1024 MB (997 MB available) |
Flash | 4 GB (3.589 GB actual); 16 GB (14.837 GB actual) (ver pestaña de mapa de memoria) |
Comunicaciones | |
Teléfono | GSM; Net: HSPA |
WiFi | wlan_mt6628; IEEE 802.11 b/g/n; MediaTek MT6628; AP Mode |
USB Host | No |
Bluetooth | Bluetooth 3.0+HS, 4.0 |
GPS | Yes |
Funciones avanzadas | |
Cámara frontal | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
Cámara trasera | Photo: 1.9 MP; Max size: 1600x1200; Focus: infinity; No flash |
Sensores | yamaha530 3-axis Magnetic Field sensor (Aichi Steel); range: 0...600; resolution: 0,002 (0%); power: 0,25mA; |
bma222 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0,004 (0,012%); power: 0,13mA; | |
tmd2771 Proximity Sensor (Capella); range: 0...1; resolution: 1 (100%); power: 0,13mA; | |
tmd2771 Light Sensor (Capella); range: 0...10240; resolution: 1 (0,01%); power: 0,13mA; | |
Alarma vibrante | Yes |
Idiomas soportados | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
Batería | Technology: Li-ion; Voltage: 3958 |
FM radio | Supported by chipset |
SD Version: | 1.0 3 |
KERNEL: Linux version 3.0.13 (qiang.wang@yatxsrv1) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu Jan 10 10:16:56 CST 2013
CODENAME: REL
Mainboard: simcom77_twn_cu_ics2
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: simcom77_twn_cu_ics2
DISPLAY: ALPS.ICS2.MP.V1
FINGERPRINT: alps/simcom77_twn_cu_ics2/simcom77_twn_cu_ics2:4.0.4/IMM76D/1357784230:user/release-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: release-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1862.86
processor : 1
BogoMIPS : 1869.41
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<6>[ 1010.921263] (0)[Gsensor] [FFFFFF40 00000033 FFFFFF65] => [ -192 51 -155] after
<6>[ 1010.981233] (0)[Gsensor] [FFFFFF40 00000033 FFFFFF62] => [ -192 51 -158] after
<7>[ 1011.035148] (0)[3420:dmesg] exit
<7>[ 1011.035394] (0)[3420:dmesg] sig 17 to [3412:AsyncTask #2]
<6>[ 1011.041235] (0)[Gsensor] [FFFFFF41 00000031 FFFFFF64] => [ -191 49 -156] after
<7>[ 1011.060732] (0)[3412:AsyncTask #2] sig 9 to [3420:dmesg]
<7>[ 1011.064966] (0)[311:WifiStateMachin] fork [3422:WifiStateMachin]
<7>[ 1011.065027] (1)[3422:WifiStateMachin] set proc[3422] name: ->[loadDriverThrea]
<6>[ 1011.075363] (0)[WLAN] rfkill_set_block(blocked 0)
<6>[ 1011.075376] (0)[WLAN] Power on
<3>[ 1011.075391] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) start
<6>[ 1011.075411] (0)[STP] mtk_wcn_stp_psm_disable:[W] STP Not Ready, Dont do Sleep/Wakeup
<3>[ 1011.075461] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration start<=
<3>[ 1011.075475] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:LDO(GPIO183)
<3>[ 1011.075485] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMU(GPIO185)
<3>[ 1011.075495] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PMUV28(not defined)
<3>[ 1011.075506] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:RST(GPIO59)
<3>[ 1011.075516] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT(GPIO13)
<3>[ 1011.075527] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:BGF_EINT_NUM(14)
<3>[ 1011.075537] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT(GPIO15)
<3>[ 1011.075548] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:WIFI_EINT_NUM(18)
<3>[ 1011.075559] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_RX(GPIO79)
<3>[ 1011.075569] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:UART_TX(GPIO71)
<3>[ 1011.075580] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:DAICLK(GPIO63)
<3>[ 1011.075590] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMOUT(GPIO62)
<3>[ 1011.075600] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMIN(GPIO64)
<3>[ 1011.075610] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:PCMSYNC(GPIO65)
<3>[ 1011.075620] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:FM digital mode is not set, no need for I2S GPIOs
<3>[ 1011.075633] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_SYNC(GPIO118)
<3>[ 1011.075643] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:GPS_LNA(GPIO186)
<3>[ 1011.075653] (0)[WMT-PLAT][I]wmt_plat_dump_pin_conf:[WMT-PLAT]=>dump wmt pin configuration emds<=
<3>[ 1011.075666] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on start
<3>[ 1011.075679] (0)[WMT-PLAT][I]wmt_plat_eirq_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1011.075700] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<7>[ 1011.091085] (0)[263:er.ServerThread] fork [3423:er.ServerThread]
<7>[ 1011.091704] (1)[3423:er.ServerThread] set proc[3423] name: ->[Thread-224]
<7>[ 1011.095374] (1)[3423:Thread-224] exit
<7>[ 1011.100337] (0)WQ_WARN: cpu:0, proc:kworker/0:0, [thermal_zone_device_check+0x0/0x18]dur: 310021231 > 15ms
<6>[ 1011.101348] (0)[Gsensor] [FFFFFF41 00000033 FFFFFF65] => [ -191 51 -155] after
<6>[ 1011.161224] (0)[Gsensor] [FFFFFF3F 00000032 FFFFFF64] => [ -193 50 -156] after
<6>[ 1011.221916] (0)[Gsensor] [FFFFFF41 00000031 FFFFFF63] => [ -191 49 -157] after
<3>[ 1011.280288] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:PCM/I2S pin seperate
<3>[ 1011.280311] (0)[WMT-PLAT][I]wmt_plat_i2s_ctrl:[MT662x]warnning:FM digital mode is not set, no I2S GPIO settings should be modified by combo driver
<3>[ 1011.280326] (0)[WMT-PLAT][I]wmt_plat_audio_ctrl:skip chip aif setting
<4>[ 1011.280534] (0)[STP-PSM] [E]_stp_psm_notify_stp(1174):ERROR! Invalid Action!!
<4>[ 1011.280540] (0)
<3>[ 1011.280567] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, BGF_EINT IRQ registered and disabled
<3>[ 1011.280581] (0)[WMT-PLAT][I]wmt_plat_all_eint_ctrl:WMT-PLAT:ALL EINT not defined
<3>[ 1011.280593] (0)[WMT-CMB-HW][I]mtk_wcn_cmb_hw_pwr_on:CMB-HW, hw_pwr_on finish (0)
<4>[ 1011.280795] (0)mtk_get_bus_freq() return 260000
<3>[ 1011.281029] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(open_stp) result(0)
<4>[ 1011.281044] (0)Flush type = 4 Rx Queue
<3>[ 1011.281255] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_115200_0) result(0)
<6>[ 1011.281294] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (0)
<4>[ 1011.281308] (0)[STP-PSM] [I]_stp_psm_reset: _stp_psm_reset
<4>[ 1011.281319] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<4>[ 1011.281332] (0)[STP-PSM] [I]_stp_psm_reset: reset-wake_lock(0)
<6>[ 1011.281348] (0)[STP] mtk_wcn_stp_ready:[I] set ready (0)
<6>[ 1011.281366] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000002
<6>[ 1011.281379] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 1011.281391] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<6>[ 1011.281716] (0)[Gsensor] [FFFFFF40 00000031 FFFFFF64] => [ -192 49 -156] after
<3>[ 1011.287073] (0)[WMT-CORE][I]wmt_core_hw_check:get hwcode (chip id) (0x6628)
<3>[ 1011.292736] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read hw_ver (hw version) (0x8a10)
<3>[ 1011.298378] (0)[WMT-IC][I]mt6628_ver_check:MT6628: read fw_ver (rom version) (0x8a10)
<3>[ 1011.298398] (0)[WMT-IC][I]mt6628_find_wmt_ic_info:found ic info(0x8a10) by full match! index:1
<3>[ 1011.298416] (0)[WMT-IC][I]mt6628_ver_check:MT6628: wmt ic info: MT6628.E2 (0x8a10, WMTHWVER:1, patch_ext:_e2)
<3>[ 1011.298432] (0)[WMT-CORE][I]wmt_core_hw_check:chip id(0x6628) ver_check ok
<3>[ 1011.309387] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(baud_4000000_0) result(0)
<3>[ 1011.309404] (0)[WMT-IC][I]mt6628_sw_init:WMT-CORE: change baudrate(4000000) ok
<3>[ 1011.311895] (0)[WMT-CTRL][I]wmt_ctrl_ul_cmd:str(srh_patch) result(0)
<3>[ 1011.311911] (0)[WMT-IC][I]mt6628_patch_dwn:valid patch found: (/system/etc/firmware//mt6628_patch_e2_hdr.bin)
<3>[ 1011.312046] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<3>[ 1011.312061] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Built Time = 20120611140339a
<3>[ 1011.312074] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Hw Ver = 0x8a10
<3>[ 1011.312085] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Sw Ver = 0x8a10
<3>[ 1011.312097] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Ph Ver = 0x0010
<3>[ 1011.312108] (0)[WMT-IC][I]mt6628_patch_dwn:[Combo Patch] Platform = ALPS
<3>[ 1011.312119] (0)[WMT-IC][I]mt6628_patch_dwn:===========================================
<6>[ 1011.341184] (0)[Gsensor] [FFFFFF41 00000033 FFFFFF65] => [ -191 51 -155] after
<3>[ 1011.393750] (1)[WMT-IC][I]mt6628_patch_dwn:wmt_core: patch dwn:0 frag(13, 436) ok
<3>[ 1011.394480] (0)[WMT-IC][I]wmt_stp_init_coex:ctrl GET_WMT_CONF ok(0xbf146948)
<3>[ 1011.395456] (0)[WMT-IC][I]mt6628_sw_init:init_coex ok
<6>[ 1011.396215] (0)[STP] mtk_wcn_stp_set_mode:[I] STP_SUPPORT_PROTOCOL = 00000001
<6>[ 1011.396229] (0)[STP] mtk_wcn_stp_enable:[I] mtk_wcn_stp_enable: set the current enable = (1)
<6>[ 1011.396242] (0)[STP] mtk_wcn_stp_coredump_start_ctrl:[I] set f/w assert (0)
<3>[ 1011.396252] (0)[WMT-IC][I]mt6628_sw_init:enable host STP-UART-FULL mode
<6>[ 1011.401170] (0)[Gsensor] [FFFFFF3F 00000031 FFFFFF62] => [ -193 49 -158] after
<3>[ 1011.413219] (0)[WMT-IC][I]mt6628_sw_init:set fm mode (2) ok
<3>[ 1011.413232] (0)[WMT-IC][I]mt6628_sw_init:disable mt662x firmware coredump
<6>[ 1011.413245] (0)[STP] mtk_wcn_stp_psm_enable:[W] STP Not Ready, Dont do Sleep/Wakeup
<6>[ 1011.413258] (0)[STP] mtk_wcn_stp_ready:[I] set ready (1)
<4>[ 1011.413270] (0)mt_combo_sdio_ctrl: force set sdio port to (3)
<6>[ 1011.413279] (0)board_sdio_ctrl force off before on
<6>[ 1011.413286] (0)mtk_wcn_cmb_sdio_off (3)
<5>[ 1011.413324] (0)[Power/clkmgr] [freq_meter] data = 42, freq = 0 MHz
<5>[ 1011.413423] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<6>[ 1011.413442] (0)mtk_wcn_cmb_sdio_on (3)
<5>[ 1011.413475] (0)[Power/clkmgr] [freq_meter] data = 42, freq = 0 MHz
<3>[ 1011.413493] (0)msdc3 -> USR Resume <- msdc_pm() : L<1691> PID
<3>[ 1011.430387] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[ 1011.430409] (0)msdc3 -> !!! Set<400KHz> Source<197000KHz> -> sclk<397KHz> DDR<0> mode<0> div<124> <- msdc_set_mclk() : L<950> PID
<3>[ 1011.430426] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<3>[ 1011.456659] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1761> PID
<6>[ 1011.461153] (0)[Gsensor] [FFFFFF41 00000032 FFFFFF65] => [ -191 50 -155] after
<3>[ 1011.470314] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4075> PID
<3>[ 1011.470354] (0)msdc3 -> ================ <- msdc_set_mclk() : L<948> PID
<3>[ 1011.470371] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<950> PID
<3>[ 1011.470388] (0)msdc3 -> ================ <- msdc_set_mclk() : L<951> PID
<6>[ 1011.471496] (0)mmc2: new high speed SDIO card at address 0001
<6>[ 1011.472987] (0)[WMT-DFT][I]hif_sdio_probe:start!
<6>[ 1011.473002] (0)[WMT-DFT][I]hif_sdio_probe:vendor(0x37a) device(0x6628) num(0x1)
<6>[ 1011.473013] (0)[WMT-DFT][I]hif_sdio_probe:card->info[0]: 6628
<6>[ 1011.473022] (0)[WMT-DFT][I]hif_sdio_probe:card->info[1]: Combo
<6>[ 1011.473032] (0)[WMT-DFT][I]hif_sdio_probe:card->info[2]:
<6>[ 1011.473040] (0)[WMT-DFT][I]hif_sdio_probe:card->info[3]:
<6>[ 1011.473166] (0)[WMT-DFT][I]hif_sdio_probe:cur_blksize(512) max(2048), host max blk_size(2048) blk_count(524288)
<7>[ 1011.473204] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [mmc_rescan+0x0/0x2dc]dur: 58793385 > 15ms
<6>[ 1011.521222] (0)[Gsensor] [FFFFFF40 00000032 FFFFFF64] => [ -192 50 -156] after
<6>[ 1011.570240] (0)[WMT-DFT][I]hif_sdio_wifi_on:start!
<7>[ 1011.570427] (1)[2:kthreadd] fork [3424:kthreadd]
<6>[ 1011.570447] (0)[WMT-DFT][I]hif_sdio_wifi_on:sdio_claim_irq() for wifi ok
<5>[ 1011.570480] (0)[wlan] net_device prDev(0xdb81d000) allocated
<5>[ 1011.572046] (0)[wlan] Open FW image: WIFI_RAM_CODE done
<5>[ 1011.572611] (0)[wlan] Allocating 4096 bytes for COMMON MGMT MEMORY POOL.
<5>[ 1011.572681] (0)[wlan] Virtual Address = e7d83000 for COMMON MGMT MEMORY POOL.
<5>[ 1011.572697] (0)[wlan] Allocating 11136 bytes for SW_RFB_T.
<5>[ 1011.572724] (0)[wlan] Virtual Address = e7d85000 for SW_RFB_T.
<5>[ 1011.572738] (0)[wlan] Allocating 13312 bytes for MSDU_INFO_T.
<5>[ 1011.572766] (0)[wlan] Virtual Address = e7d89000 for MSDU_INFO_T.
<6>[ 1011.572782] (0)[wlan] wlanAdapterStart(): Acquiring LP-OWN
<4>[ 1011.572895] (0)[RT_MONITOR]WARNNING [3424:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [3424:ksdioirqd/mmc2]
<6>[ 1011.581151] (0)[Gsensor] [FFFFFF40 00000032 FFFFFF64] => [ -192 50 -156] after
<6>[ 1011.590322] (0)[wlan] Chip ID: 0x6628
<6>[ 1011.590340] (0)[wlan] Revision ID: 0x0
<6>[ 1011.641151] (0)[Gsensor] [FFFFFF40 00000032 FFFFFF66] => [ -192 50 -154] after
<6>[ 1011.701152] (0)[Gsensor] [FFFFFF41 00000033 FFFFFF64] => [ -191 51 -156] after
<6>[ 1011.761148] (0)[Gsensor] [FFFFFF40 00000032 FFFFFF62] => [ -192 50 -158] after
<5>[ 1011.818684] (0)[Power/Battery] [BATTERY:AVG] BatTemp:25 Vbat:3956 VBatSen:3928 SOC:83 ChrDet:1 Vchrin:4190 Icharging:538 ChrType:4 USBstate:1 gADC_I_SENSE_offset:-19
<4>[ 1011.818908] (0)[TestMode] Disable Safty Timer : no UI display
<4>[ 1011.821146] (0)[TestMode] Disable Safty Timer. bat_tt_enable=3, bat_thr_test_mode=0, bat_thr_test_value=0
<6>[ 1011.822676] (0)[Gsensor] [FFFFFF40 00000032 FFFFFF64] => [ -192 50 -156] after
<6>[ 1011.881175] (0)[Gsensor] [FFFFFF41 00000033 FFFFFF64] => [ -191 51 -156] after
<7>[ 1011.915491] (1)WQ_WARN: cpu:4, proc:kworker/u:1, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 15578846 > 15ms
<6>[ 1011.941170] (0)[Gsensor] [FFFFFF41 00000032 FFFFFF64] => [ -191 50 -156] after
<6>[ 1012.001153] (0)[Gsensor] [FFFFFF40 00000033 FFFFFF62] => [ -192 51 -158] after
<6>[ 1012.061170] (0)[Gsensor] [FFFFFF41 00000033 FFFFFF64] => [ -191 51 -156] after
<6>[ 1012.121792] (0)[Gsensor] [FFFFFF40 00000030 FFFFFF62] => [ -192 48 -158] after
<7>[ 1012.171216] (0)[ccci/net] CCMNI0 open
<6>[ 1012.171530] (0)[RTlog insert] fib_netdev_event() ccmni0 NETDEV_UP!
<6>[ 1012.171698] (0)[RTlog insert] fib_inetaddr_event() ccmni0 NETDEV_UP!
<3>[ 1012.174587] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.local-ip
<3>[ 1012.174826] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.gw
<3>[ 1012.175966] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.dns1
<3>[ 1012.176171] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.dns2
<3>[ 1012.176342] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.ipv6.dns1
<3>[ 1012.176529] (0)init: sys_prop: permission denied uid:1001 name:net.ccmni0.ipv6.dns2
<6>[ 1012.181197] (0)[Gsensor] [FFFFFF41 00000033 FFFFFF65] => [ -191 51 -155] after
<7>[ 1012.236464] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 18994538 > 15ms
<6>[ 1012.241423] (0)[Gsensor] [FFFFFF40 00000031 FFFFFF64] => [ -192 49 -156] after
<6>[ 1012.283939] (1)<< [RTlog info] ip_rt_ioctl rt.flags =00000005
<6>[ 1012.283951] (1)[RTlog info] ip_rt_ioctl rt.dev =ccmni0
<6>[ 1012.283959] (1)[RTlog info] ip_rt_ioctl rt.rt_dst =c8881b0a
<6>[ 1012.283967] (1)[RTlog info] ip_rt_ioct rt.rt_gateway =00000000
<6>[ 1012.283978] (1)[RTlog insert] p_rt_ioctl: cmd == SIOCADDRT! >>
<6>[ 1012.285811] (1)<< [RTlog info] ip_rt_ioctl rt.flags =00000003
<6>[ 1012.285822] (1)[RTlog info] ip_rt_ioctl rt.dev =ccmni0
<6>[ 1012.285830] (1)[RTlog info] ip_rt_ioctl rt.rt_dst =00000000
<6>[ 1012.285838] (1)[RTlog info] ip_rt_ioct rt.rt_gateway =c8881b0a
<6>[ 1012.285853] (1)[RTlog insert] p_rt_ioctl: cmd == SIOCADDRT! >>
<6>[ 1012.301644] (0)[Gsensor] [FFFFFF42 00000033 FFFFFF65] => [ -190 51 -155] after
<6>[ 1012.361388] (0)[Gsensor] [FFFFFF41 00000032 FFFFFF63] => [ -191 50 -157] after
<6>[ 1012.370139] (0)[wlan] wlanAdapterStart(): Waiting for Ready bit..
<6>[ 1012.390341] (0)[wlan] Ready bit asserted
<7>[ 1012.410289] (0)WQ_WARN: cpu:0, proc:kworker/0:0, [thermal_zone_device_check+0x0/0x18]dur: 310050846 > 15ms
<6>[ 1012.421176] (0)[Gsensor] [FFFFFF41 00000032 FFFFFF65] => [ -191 50 -155] after
<5>[ 1012.426231] (0)[wlan] RF CAL FAIL = (0),BB CAL FAIL = (0)
<5>[ 1012.426780] (0)[wlan] [wifi] wlan%d netif_carrier_off
<6>[ 1012.426806] (0)[wlan] [1] fgEnArpFilter:0x1, u4UapsdAcBmp:0x0, u4MaxSpLen:0x0
<6>[ 1012.426865] (0)[wlan] eNetTypeIndex:0, ePwrMode:2, fgEnCmdEvent:0
<5>[ 1012.426997] (0)[wlan] Domain: map=0, idx=1, code=0x0000
<7>[ 1012.428489] (1)[2:kthreadd] fork [3425:kthreadd]
<5>[ 1012.428520] (0)[wlan] tx_thread starts running...
<6>[ 1012.481216] (0)[Gsensor] [FFFFFF40 00000033 FFFFFF63] => [ -192 51 -157] after
<6>[ 1012.515770] (0)[WMT-DFT][I]hif_sdio_clt_probe_func:clt_probe_func card_id(6628) func_num(1) blk_sz(512) prob_idx(0) ret(0) ok
<6>[ 1012.515786] (0)[WMT-DFT][I]hif_sdio_wifi_on:ok!
<3>[ 1012.515805] (0)[WMT-CORE][I]wmt_core_dump_func_state:[AF FUNC ON]status(b:0 f:0 g:0 w:2 lpbk:0 coredump:0 wmt:2 sd1:2 sd2:0 stp:0)
<4>[ 1012.515951] (0)[STP-PSM] [I]_stp_psm_put_op: opId(1) enqueue
<3>[ 1012.515986] (0)[WMT-EXP][I]mtk_wcn_wmt_func_ctrl:OPID(3) type(3) ok
<4>[ 1012.516151] (0)[STP-PSM] [I]_stp_psm_notify_wmt: In ACT state, dont do WAKEUP/HOST_AWAKE again
<7>[ 1012.518332] (1)[3422:loadDriverThrea] exit
<6>[ 1012.527458] (0)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<6>[ 1012.527487] (0)ADDRCONF(NETDEV_UP): wlan0: link is not ready
<5>[ 1012.540874] (1)init: starting `wpa_supplicant`
<7>[ 1012.541164] (1)[1:init] fork [3426:init]
<6>[ 1012.541492] (0)[Gsensor] [FFFFFF42 00000032 FFFFFF64] => [ -190 50 -156] after
<7>[ 1012.542477] (0)[3426:init] set proc[3426] name: ->[logwrapper]
<7>[ 1012.545136] (0)[3426:logwrapper] fork [3427:logwrapper]
<7>[ 1012.545681] (0)[3427:logwrapper] set proc[3427] name: ->[wpa_supplicant]
<6>[ 1012.601140] (0)[Gsensor] [FFFFFF41 00000032 FFFFFF63] => [ -191 50 -157] after
<5>[ 1012.630572] (0)[wlan] N=0 closed
<5>[ 1012.630601] (0)[wlan] EVENT-ROAMING ABORT: Current Time = 712600
<5>[ 1012.630616] (0)[wlan] [13] TRANSITION: [0] -> [0]
<6>[ 1012.631214] (0)[wlan] NAF=0,0,0
<6>[ 1012.631395] (0)[wlan] NAF=0,0,0
<7>[ 1012.641559] (0)[311:WifiStateMachin] fork [3428:WifiStateMachin]
<7>[ 1012.641756] (1)[3428:WifiStateMachin] set proc[3428] name: ->[WifiMonitor]
<6>[ 1012.661154] (0)[Gsensor] [FFFFFF40 00000032 FFFFFF63] => [ -192 50 -157] after
<6>[ 1012.721149] (0)[Gsensor] [FFFFFF41 00000031 FFFFFF65] => [ -191 49 -155] after
<6>[ 1012.781212] (0)[Gsensor] [FFFFFF41 00000033 FFFFFF62] => [ -191 51 -158] after
<0>[ 1012.789283] (0)[LED]button-backlight:0
<4>[ 1012.789298] (0)mt65xx_leds_set_cust: set brightness, name:button-backlight, mode:3, level:0
<0>[ 1012.789310] (0)[LED]PMIC#0:0
<6>[ 1012.789322] (0)[Power/PMIC] [hwBacklightKPLEDTurnOff]...........
<6>[ 1012.841743] (0)[Gsensor] [FFFFFF42 00000031 FFFFFF63] => [ -190 49 -157] after
<5>[ 1012.871607] (0)[wlan] [13] TRANSITION: [0] -> [2]
<6>[ 1012.901152] (0)[Gsensor] [FFFFFF40 00000031 FFFFFF63] => [ -192 49 -157] after
<7>[ 1012.942070] (1)[3406:com.specdevice] exit
<6>[ 1012.961549] (0)[Gsensor] [FFFFFF41 00000032 FFFFFF64] => [ -191 50 -156] after
<5>[ 1012.990620] (0)[wlan] CMD set_band=0
<6>[ 1013.021176] (0)[Gsensor] [FFFFFF40 00000030 FFFFFF63] => [ -192 48 -157] after
<6>[ 1013.081296] (0)[Gsensor] [FFFFFF41 00000032 FFFFFF64] => [ -191 50 -156] after
<6>[ 1013.141295] (0)[Gsensor] [FFFFFF40 00000033 FFFFFF63] => [ -192 51 -157] after
<7>[ 1013.153038] (1)[3412:AsyncTask #2] fork [3429:AsyncTask #2]
<7>[ 1013.159915] (1)[3324:Binder Thread #] fork [3430:Binder Thread #]
<7>[ 1013.160389] (0)[3430:Binder Thread #] set proc[3430] name: ->[Binder Thread #]
<7>[ 1013.169248] (1)[3429:AsyncTask #2] set proc[3429] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1
ro.build.version.incremental=eng.qiang.wang.1357784230
ro.custom.build.version=I968.I968.02.05.F.A-V1.0.4B03Q10
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.1.9
ro.build.date=Thu Jan 10 10:18:35 CST 2013
ro.build.date.utc=1357784315
ro.build.type=user
ro.build.user=qiang.wang
ro.build.host=yatxsrv1
ro.build.tags=release-keys
ro.product.model=GT-N7102
ro.product.brand=samsung
ro.product.name=I968
ro.product.device=simcom77_twn_cu_ics2
ro.product.board=simcom77_twn_cu_ics2
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=simcom77_twn_cu_ics2
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=simcom77_twn_cu_ics2-user 4.0.4 IMM76D eng.qiang.wang.1357784230 release-keys
ro.build.fingerprint=alps/simcom77_twn_cu_ics2/simcom77_twn_cu_ics2:4.0.4/IMM76D/1357784230:user/release-keys
ro.build.flavor=
ro.build.characteristics=default
persist.sys.timezone=Asia/Shanghai
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.ringtone=S_Over_the_horizon.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
wlan_mt6628 285155 0 - Live 0xbf1f7000 (P)
cfg80211 122352 0 - Live 0xbf1ce000
mtk_fm_priv 2399 0 - Live 0xbf1ca000 (P)
mtk_fm_drv 98433 1 mtk_fm_priv, Live 0xbf1aa000
mtk_stp_bt 39986 0 - Live 0xbf19d000
mtk_stp_gps 37294 0 - Live 0xbf190000
mtk_stp_uart 21589 0 - Live 0xbf187000 (P)
mtk_stp_wmt 372872 7 wlan_mt6628,mtk_fm_priv,mtk_fm_drv,mtk_stp_bt,mtk_stp_gps,mtk_stp_uart, Live 0xbf11d000 (P)
mtk_hif_sdio 18482 2 wlan_mt6628,mtk_stp_wmt, Live 0xbf114000
devinfo 840 0 - Live 0xbf110000 (P)
devapc 4553 0 - Live 0xbf10b000 (P)
sec 90369 0 - Live 0xbf0ee000 (P)
vcodec_kernel_driver 28254 2 - Live 0xbf0e2000 (P)
m4u 113419 36 - Live 0xbf0bd000 (P)
ccmni 17126 0 - Live 0xbf0b4000 (P)
ccci 116351 15 ccmni, Live 0xbf08c000 (P)
ccci_plat 127258 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23618 0 - Live 0xbf054000
pvrsrvkm 233127 151 mtklfb, Live 0xbf00d000
mtk_hwe 1394 0 - Live 0xbf009000 (P)
aed 16380 3 - Live 0xbf000000 (P)
RAM: 1024 MB (997 MB available)
System RAM: 997.000MB
mtkfb.0: 5.000MB
Flash: 4 GB (3.589 GB actual); 16 GB (14.837 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 14.837 GB
Pantalla táctil para alps GT-N7102
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Batería de repuesto para alps GT-N7102
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Fundas para alps GT-N7102
$22.64 10pieces ALPS Alps SKHLLCA010 light touch switch inlet 3 * 6 * 3.5 switch with frame switch original
$2.32 ALPS PS5 joystick game console 3D joystick replacement drift potentiometer 2.3K resistor repair accessories control joystick
$32.8 1pcs ALPS RAS0N Series Slide Potentiometer With Dust-cover Travel 100mm Total Length 128mm 3pin B10K Single-unit Metal
$8.93 ALPS Remote Control Volume Motorized Potentiometer 50K 100K For Preamp Power Amplifier Headphone AMP Audio DIY, ALPS POT,
$3.09 15MM Digital Fader RS45111A6A08 B10K for ALPS Single Slip Potentiometer
$8.01 10K 20K 50K 100K 250K 500K ALPS RK27 VOLUME Potentiometer Dual 10~500KAX2 Slotted Japan Rotary switch 6Ppin
$20.92 New Original ALPS RKJXT1F42001 4-way joystick+bar encoder+central button
$60.16 1pc ALPS RK27 Dual-unit Serrated Volume Rotary Potentiometer 5kX2 10k 20k 50K 100K 250k 500k Round/Flat Shaft 6Pin Leng 25mm
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$6.06 ALPS Band Rotary Switch SRRM433700 4 Pole 3 Position SRRM342800 3 Pole 4 Position Amplifier Signal Switch 20mm Plum Round Shaft
$65.6 1 pcs for Japan ALPS electric faderRSA0N11M9A0J for LS9 M7CL DM1000 DM200 mixer potentiometer / motor-driven master fader
$59.71 10pcs Original Replacement Alps Analog Joystick 3D Thumb stick Axis Sensor Module Rocker For Xbox One, One S, One X,One Elite
$11.43 1PC Japan ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual 10K/20K/50K/100K/250K Potentiometer Round handle + PCB
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$58.09 1PC Japan ALPS RK27 50KA 100KA 10KA 250KA Stereo Volume Potentiometer Attenuator 6mm Knurled Shaft ±20% For Hifi Audio Amplifier
$1.29 1PCS ALPS EC25 SRGP200200 Hollow shaft Encoder 20 positioning 10 pulse Car Audio Volume Switch
$194.34 2.4mm Titanium ALPS Stardrive Locking Screws Pet Veterinaria Orthopedics Implant Surgical Instruments Veterinary Accessories
$55 1pcs New original ALPS Medical monitor Encoder EM11B16140AD
$7.43 10PCS Imported ALPS RDC803001A rotary resistance position sensor with a 360 degree resistance value of 10K
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |