一般规格 | |
---|---|
生产厂家 | alps |
型号 | i9400 |
Android版 | 4.0.4; eng.jlhong.1366167558; SDK15 |
中央处理单元 | 2 cores; ARMv7 Processor rev 0 (v7l); Max: 1001.0 MHz; Min: 250.2 MHz |
显示 | 800 x 480; DPI: 240; Evaluated Size: 3.9" |
触摸屏 | Multitouch 5 points |
图形处理器 | PowerVR SGX 531; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.8@905891 |
内存RAM | 512 MB (486 MB available) |
快闪记忆体 | 4 GB (3.589 GB actual); 8 GB (7.402 GB actual) (见存储器映射选项卡) |
沟通 | |
电话 | GSM, Dual SIM; Net: HSPA |
WiFi | devinfo; IEEE 802.11 a/b/g/n; Broadcom 4330; AP Mode |
USB主机 | No |
蓝牙 | Bluetooth 4.0+HS |
全球定位系统 | Yes |
高级功能 | |
前置摄像头 | Photo: 8.0 MP; Max: 3264x2448; Focus: auto continuous-picture continuous-video macro infinity manual fullscan; Flash modes: auto on off torch |
背照相机 | Photo: 0.3 MP; Max size: 640x480; Focus: infinity; No flash |
传感器 | BMM050 Magnetic (Bosch Sensortec); range: 0...1600; resolution: 0.3 (0.019%); power: 0.5mA; |
BMA250 3-axis Accelerometer (The Android Open Source Project); range: 0...32; resolution: 0.004 (0.012%); power: 0.13mA; | |
AL3006 Proximity Sensor (Liteon); range: 0...1; resolution: 1 (100%); power: 0.13mA; | |
震动模式 | Yes |
支持的语言 | 43; Arabic; Bulgarian; Bengali; Catalan; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Korean; Lithuanian; Latvian; Malay; Norwegian; Dutch; Polish; Pashto; Portuguese; Romansh; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Thai; Turkish; Ukrainian; Urdu; Vietnamese; Chinese |
电池 | Technology: Li-ion; Voltage: 3704 |
FM radio | 76MHz to 108MHz |
SD Version: | 1.1 5 |
KERNEL: Linux version 3.0.13 (jlhong@jlhong-Studio-540) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Wed Apr 17 10:58:52 CST 2013
CODENAME: REL
Mainboard: s8073
BRAND: ninetology
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: s8073
DISPLAY: ALPS.ICS2.MP.V1
FINGERPRINT: ninetology/s8073/s8073:4.0.4/IMM76D/1366167558:user/test-keys
HARDWARE: mt6577
ID: IMM76D
TAGS: test-keys
Processor : ARMv7 Processor rev 0 (v7l)
processor : 0
BogoMIPS : 1862.86
processor : 1
BogoMIPS : 1869.41
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc09
CPU revision : 0
Hardware : MT6577
Revision : 65fb8a00
Serial : 0000000000000000
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_EXT_multi_draw_arrays
GL_EXT_texture_format_BGRA8888
GL_EXT_discard_framebuffer
GL_EXT_shader_texture_lod
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_multisampled_render_to_texture
<7>[ 4255.585926] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 16207307 > 15ms
<7>[ 4255.605634] (1)[14964:dmesg] exit
<7>[ 4255.605927] (1)[14964:dmesg] sig 17 to [14962:AsyncTask #4]
<7>[ 4255.655874] (1)[14959:Thread-982] exit
<7>[ 4255.684926] (0)[290:WifiStateMachin] fork [14965:WifiStateMachin]
<7>[ 4255.685101] (1)[14965:WifiStateMachin] set proc[14965] name: ->[loadDriverThrea]
<7>[ 4255.755439] (1)[14965:loadDriverThrea] exit
<5>[ 4255.912266] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: open file ok
<5>[ 4255.912305] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: got_value=450
<5>[ 4255.912322] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] counter=0, first_time =1, MA_len=1
<5>[ 4255.912340] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] T_Battery, 45000
<5>[ 4255.912401] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: open file ok
<5>[ 4255.912427] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: got_value=450
<5>[ 4255.912443] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] counter=0, first_time =1, MA_len=1
<5>[ 4255.912460] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] T_Battery, 45000
<7>[ 4255.982718] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310604000 > 15ms
<7>[ 4256.041407] (1)[248:er.ServerThread] fork [14966:er.ServerThread]
<7>[ 4256.042161] (1)[14966:er.ServerThread] set proc[14966] name: ->[Thread-865]
<5>[ 4256.055910] (1)init: starting `wpa_supplicant`
<7>[ 4256.056227] (1)[1:init] fork [14967:init]
<7>[ 4256.059200] (1)[14967:init] set proc[14967] name: ->[wpa_supplicant]
<7>[ 4256.146654] (1)[14966:Thread-865] exit
<7>[ 4256.156641] (0)[290:WifiStateMachin] fork [14968:WifiStateMachin]
<7>[ 4256.162632] (1)[14968:WifiStateMachin] set proc[14968] name: ->[WifiMonitor]
<3>[ 4256.236941] (0)CFG80211-DEBUG) wl_cfg80211_netdev_notifier_call :Enter
<4>[ 4256.236972] (0)
<4>[ 4256.236975] (0)Dongle Host Driver, version 5.90.195.26.2
<4>[ 4256.236979] (0)Compiled in drivers/net/wireless/bcmdhd on Apr 17 2013 at 10:57:07
<4>[ 4256.236993] (0)wl_android_wifi_on in
<4>[ 4256.237003] (0)wifi_set_reset = 1
<4>[ 4256.242861] (0)[LCM-LT4015W-DSI] check_display_normal (line:953) :[LSQ] --test ic normal == 0x9c , 0x0 , 0x7 , 0x0
<4>[ 4256.242870] (0)
<4>[ 4256.252257] (0)===========bcm4330_wifi_reset=====on=============
<4>[ 4256.252280] (0)=========== WLAN going back to live ========
<4>[ 4256.252293] (0)sdio_reset_comm():
<4>[ 4256.252342] (0)Ivan SD3 clock on!
<5>[ 4256.252442] (0)[Power/clkmgr] [freq_meter] data = 15494, freq = 196 MHz
<4>[ 4256.308431] (1)Ivan msdc_ops_set_ios!
<4>[ 4256.368058] (1)Ivan msdc_ops_set_ios!
<3>[ 4256.369313] (1)msdc3 -> ================ <- msdc_set_mclk() : L<950> PID
<3>[ 4256.369331] (1)msdc3 -> !!! Set<260KHz> Source<197000KHz> -> sclk<259KHz> DDR<0> mode<0> div<190> <- msdc_set_mclk() : L<952> PID
<3>[ 4256.369348] (1)msdc3 -> ================ <- msdc_set_mclk() : L<953> PID
<4>[ 4256.369358] (1)Ivan msdc_ops_set_ios SD3 clock on!
<7>[ 4256.383445] (0)WQ_WARN: cpu:4, proc:kworker/u:0, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 19096154 > 15ms
<4>[ 4256.420252] (1)Ivan msdc_ops_set_ios!
<4>[ 4256.475896] (1)Ivan msdc_ops_set_ios!
<7>[ 4256.524085] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 19590923 > 15ms
<4>[ 4256.531516] (0)Ivan msdc_ops_set_ios!
<3>[ 4256.531549] (0)msdc3 -> select card<0x00010000> <- msdc_command_start() : L<1779> PID
<4>[ 4256.584654] (0)Ivan msdc_ops_set_ios!
<3>[ 4256.584678] (0)msdc3 -> SD latch data<1> cmd<1> <- msdc_ops_set_ios() : L<4101> PID
<3>[ 4256.584714] (0)msdc3 -> ================ <- msdc_set_mclk() : L<950> PID
<3>[ 4256.584732] (0)msdc3 -> !!! Set<50000KHz> Source<197000KHz> -> sclk<49250KHz> DDR<0> mode<0> div<1> <- msdc_set_mclk() : L<952> PID
<3>[ 4256.584748] (0)msdc3 -> ================ <- msdc_set_mclk() : L<953> PID
<4>[ 4256.584759] (0)Ivan msdc_ops_set_ios SD3 clock on!
<4>[ 4256.637671] (0)Ivan msdc_ops_set_ios!
<4>[ 4256.689242] (0)Ivan msdc_ops_set_ios!
<7>[ 4256.689712] (0)[2:kthreadd] fork [14969:kthreadd]
<4>[ 4256.689755] (1)[RT_MONITOR]WARNNING [14969:ksdioirqd/mmc2] SET NOT ALLOW RT Prio [1] for proc [14969:ksdioirqd/mmc2]
<4>[ 4256.690408] (0)dhdsdio_download_code_file: download firmware /system/etc/firmware/fw_bcmdhd.bin
<4>[ 4256.732027] (0)dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 4256.856149] (1)wifi_get_mac_addr
<4>[ 4256.862479] (0)Firmware up: op_mode=1, Broadcom Dongle Host Driver mac=d0:b3:3f:e5:8e:e2
<5>[ 4256.912367] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: open file ok
<5>[ 4256.912422] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: got_value=450
<5>[ 4256.912458] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] counter=0, first_time =1, MA_len=1
<5>[ 4256.912483] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] T_Battery, 45000
<5>[ 4256.912580] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: open file ok
<5>[ 4256.912616] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: got_value=450
<5>[ 4256.912638] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] counter=0, first_time =1, MA_len=1
<5>[ 4256.912661] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] T_Battery, 45000
<7>[ 4257.039898] (0)WQ_WARN: cpu:4, proc:kworker/u:2, [WorkQueueHandler+0x0/0x18 [mtklfb]]dur: 25653923 > 15ms
<4>[ 4257.103144] (1)dhd_rx_frame: net device is NOT registered yet. drop packet
<4>[ 4257.103459] (1)dhd_rx_frame: net device is NOT registered yet. drop packet
<4>[ 4257.113125] (1)Firmware version = wl0: May 9 2012 23:14:16 version 5.90.195.26.2 FWID 01-1229e594
<3>[ 4257.123199] (1)CFG80211-DEBUG) wl_cfg80211_up :In
<3>[ 4257.123254] (1)CFG80211-TRACE) wl_cfg80211_attach_post :In
<3>[ 4257.133107] (1)CFGP2P-INFO) wl_cfgp2p_supported : p2p is supported
<3>[ 4257.133194] (1)CFG80211-DEBUG) __wl_cfg80211_up :In
<3>[ 4257.133239] (1)CFG80211-TRACE) dhd_config_dongle :In
<4>[ 4257.143304] (1)dhd_rx_frame: net device is NOT registered yet. drop packet
<3>[ 4257.153254] (1)CFG80211-DEBUG) wl_update_wiphybands :Entry
<3>[ 4257.163367] (1)CFG80211-DEBUG) wl_cfg80211_set_power_mgmt :power save enabled
<6>[ 4257.176053] (1)[RTlog insert] fib_netdev_event() wlan0 NETDEV_UP!
<3>[ 4257.176248] (1)CFG80211-DEBUG) wl_cfg80211_netdev_notifier_call :Enter
<3>[ 4257.176591] (1)CFG80211-DEBUG) wl_cfg80211_netdev_notifier_call :Enter
<3>[ 4257.177196] (1)CFG80211-DEBUG) wl_cfg80211_mgmt_frame_register :wl_cfg80211_mgmt_frame_register: frame_type: d0, reg: 1
<3>[ 4257.177389] (1)CFG80211-DEBUG) wl_cfg80211_mgmt_frame_register :wl_cfg80211_mgmt_frame_register: frame_type: d0, reg: 1
<3>[ 4257.177564] (1)CFG80211-DEBUG) wl_cfg80211_mgmt_frame_register :wl_cfg80211_mgmt_frame_register: frame_type: d0, reg: 1
<3>[ 4257.177737] (1)CFG80211-DEBUG) wl_cfg80211_mgmt_frame_register :wl_cfg80211_mgmt_frame_register: frame_type: d0, reg: 1
<3>[ 4257.177915] (1)CFG80211-DEBUG) wl_cfg80211_mgmt_frame_register :wl_cfg80211_mgmt_frame_register: frame_type: d0, reg: 1
<3>[ 4257.178091] (1)CFG80211-DEBUG) wl_cfg80211_mgmt_frame_register :wl_cfg80211_mgmt_frame_register: frame_type: d0, reg: 1
<3>[ 4257.178264] (1)CFG80211-DEBUG) wl_cfg80211_mgmt_frame_register :wl_cfg80211_mgmt_frame_register: frame_type: d0, reg: 1
<3>[ 4257.204080] (1)CFG80211-DEBUG) wl_update_pmklist :No of elements 0
<7>[ 4257.292168] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 309640077 > 15ms
<3>[ 4257.322789] (1)CFG80211-DEBUG) wl_cfg80211_scan :Enter
<3>[ 4257.322808] (1)CFG80211-DEBUG) __wl_cfg80211_scan :Enter wiphy (ddc20140)
<3>[ 4257.322830] (1)CFGP2P-INFO) wl_cfgp2p_set_management_ie : ADDED ID : 221, Len : 105 , OUI :00:50:f2
<3>[ 4257.322848] (1)CFGP2P-INFO) wl_cfgp2p_vndr_ie : ie_id : dd, data length : 102
<3>[ 4257.332512] (1)CFGP2P-INFO) wl_cfgp2p_vndr_ie : vndr_ie iovar returns 0
<3>[ 4257.332542] (1)CFG80211-SCAN) wl_do_escan :Enter
<3>[ 4257.342469] (1)CFG80211-DEBUG) wl_run_escan :Enter
<3>[ 4257.342485] (1)CFG80211-SCAN) wl_run_escan : LEGACY E-SCAN START
<3>[ 4257.342499] (1)CFG80211-SCAN) wl_scan_prep :Preparing Scan request
<3>[ 4257.342511] (1)CFG80211-SCAN) wl_scan_prep :nprobes=-1
<3>[ 4257.342523] (1)CFG80211-SCAN) wl_scan_prep :active_time=-1
<3>[ 4257.342534] (1)CFG80211-SCAN) wl_scan_prep :passive_time=-1
<3>[ 4257.342545] (1)CFG80211-SCAN) wl_scan_prep :home_time=-1
<3>[ 4257.342556] (1)CFG80211-SCAN) wl_scan_prep :scan_type=0
<3>[ 4257.342568] (1)CFG80211-SCAN) wl_scan_prep :### List of channelspecs to scan ###
<3>[ 4257.342581] (1)CFG80211-SCAN) wl_scan_prep :Chan : 1, Channel spec: 1
<3>[ 4257.342593] (1)CFG80211-SCAN) wl_scan_prep :Chan : 2, Channel spec: 2
<3>[ 4257.342606] (1)CFG80211-SCAN) wl_scan_prep :Chan : 3, Channel spec: 3
<3>[ 4257.342618] (1)CFG80211-SCAN) wl_scan_prep :Chan : 4, Channel spec: 4
<3>[ 4257.342631] (1)CFG80211-SCAN) wl_scan_prep :Chan : 5, Channel spec: 5
<3>[ 4257.342644] (1)CFG80211-SCAN) wl_scan_prep :Chan : 6, Channel spec: 6
<3>[ 4257.342656] (1)CFG80211-SCAN) wl_scan_prep :Chan : 7, Channel spec: 7
<3>[ 4257.342669] (1)CFG80211-SCAN) wl_scan_prep :Chan : 8, Channel spec: 8
<3>[ 4257.342681] (1)CFG80211-SCAN) wl_scan_prep :Chan : 9, Channel spec: 9
<3>[ 4257.342693] (1)CFG80211-SCAN) wl_scan_prep :Chan : 10, Channel spec: a
<3>[ 4257.342706] (1)CFG80211-SCAN) wl_scan_prep :Chan : 11, Channel spec: b
<3>[ 4257.342719] (1)CFG80211-SCAN) wl_scan_prep :Chan : 12, Channel spec: c
<3>[ 4257.342732] (1)CFG80211-SCAN) wl_scan_prep :Chan : 13, Channel spec: d
<3>[ 4257.342744] (1)CFG80211-SCAN) wl_scan_prep :Chan : 14, Channel spec: e
<3>[ 4257.342757] (1)CFG80211-SCAN) wl_scan_prep :### List of SSIDs to scan ###
<3>[ 4257.342769] (1)CFG80211-SCAN) wl_scan_prep :0: Broadcast scan
<5>[ 4257.912568] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: open file ok
<5>[ 4257.912689] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: got_value=450
<5>[ 4257.912755] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] counter=0, first_time =1, MA_len=1
<5>[ 4257.912823] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] T_Battery, 45000
<5>[ 4257.913055] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: open file ok
<5>[ 4257.913154] (0)[Power/Battery_Thermal] [get_hw_battery_temp]: got_value=450
<5>[ 4257.913219] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] counter=0, first_time =1, MA_len=1
<5>[ 4257.913286] (0)[Power/Battery_Thermal] [mtktsbattery_get_hw_temp] T_Battery, 45000
<3>[ 4257.952714] (0)CFG80211-DEBUG) wl_cfg80211_event :event_type (69):WLC_E_WLC_E_ESCAN_RESULT
<3>[ 4257.952996] (0)CFG80211-DEBUG) wl_event_handler :event type (69), if idx: 0
<3>[ 4257.953059] (0)CFG80211-TRACE) wl_is_p2p_event :NON-P2P Event 69 on ifidx (ifidx:0)
<3>[ 4257.953118] (0)CFG80211-DEBUG) wl_escan_handler : enter event type : 69, status : 0
<3>[ 4257.953178] (0)CFG80211-INFO) wl_escan_handler : ESCAN COMPLETED
<3>[ 4257.953223] (0)CFG80211-DEBUG) wl_inform_bss :scanned AP count (0)
<3>[ 4257.953271] (0)CFG80211-DEBUG) wl_notify_escan_complete :Enter
<4>[ 4258.274165] (0)[LCM-LT4015W-DSI] check_display_normal (line:953) :[LSQ] --test ic normal == 0x9c , 0x0 , 0x7 , 0x0
<4>[ 4258.274175] (0)
<3>[ 4258.342468] (1)WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for MY as MY rev -1
<3>[ 4258.353441] (1)CFG80211-DEBUG) wl_cfg80211_scan :Enter
<3>[ 4258.353463] (1)CFG80211-DEBUG) __wl_cfg80211_scan :Enter wiphy (ddc20140)
<3>[ 4258.353488] (1)CFGP2P-INFO) wl_cfgp2p_set_management_ie : Previous mgmt IE is equals to current IE
<3>[ 4258.353505] (1)CFG80211-SCAN) wl_do_escan :Enter
<3>[ 4258.362429] (1)CFG80211-DEBUG) wl_run_escan :Enter
<3>[ 4258.362447] (1)CFG80211-SCAN) wl_run_escan : LEGACY E-SCAN START
<3>[ 4258.362461] (1)CFG80211-SCAN) wl_scan_prep :Preparing Scan request
<3>[ 4258.362474] (1)CFG80211-SCAN) wl_scan_prep :nprobes=-1
<3>[ 4258.362485] (1)CFG80211-SCAN) wl_scan_prep :active_time=-1
<3>[ 4258.362497] (1)CFG80211-SCAN) wl_scan_prep :passive_time=-1
<3>[ 4258.362508] (1)CFG80211-SCAN) wl_scan_prep :home_time=-1
<3>[ 4258.362520] (1)CFG80211-SCAN) wl_scan_prep :scan_type=0
<3>[ 4258.362531] (1)CFG80211-SCAN) wl_scan_prep :### List of channelspecs to scan ###
<3>[ 4258.362544] (1)CFG80211-SCAN) wl_scan_prep :Chan : 1, Channel spec: 1
<3>[ 4258.362557] (1)CFG80211-SCAN) wl_scan_prep :Chan : 2, Channel spec: 2
<3>[ 4258.362570] (1)CFG80211-SCAN) wl_scan_prep :Chan : 3, Channel spec: 3
<3>[ 4258.362583] (1)CFG80211-SCAN) wl_scan_prep :Chan : 4, Channel spec: 4
<3>[ 4258.362595] (1)CFG80211-SCAN) wl_scan_prep :Chan : 5, Channel spec: 5
<3>[ 4258.362607] (1)CFG80211-SCAN) wl_scan_prep :Chan : 6, Channel spec: 6
<3>[ 4258.362620] (1)CFG80211-SCAN) wl_scan_prep :Chan : 7, Channel spec: 7
<3>[ 4258.362633] (1)CFG80211-SCAN) wl_scan_prep :Chan : 8, Channel spec: 8
<3>[ 4258.362645] (1)CFG80211-SCAN) wl_scan_prep :Chan : 9, Channel spec: 9
<3>[ 4258.362658] (1)CFG80211-SCAN) wl_scan_prep :Chan : 10, Channel spec: a
<3>[ 4258.362671] (1)CFG80211-SCAN) wl_scan_prep :Chan : 11, Channel spec: b
<3>[ 4258.362683] (1)CFG80211-SCAN) wl_scan_prep :Chan : 12, Channel spec: c
<3>[ 4258.362696] (1)CFG80211-SCAN) wl_scan_prep :Chan : 13, Channel spec: d
<3>[ 4258.362709] (1)CFG80211-SCAN) wl_scan_prep :Chan : 14, Channel spec: e
<3>[ 4258.362721] (1)CFG80211-SCAN) wl_scan_prep :### List of SSIDs to scan ###
<3>[ 4258.362733] (1)CFG80211-SCAN) wl_scan_prep :0: Broadcast scan
<7>[ 4258.590495] (1)[14962:AsyncTask #4] fork [14970:AsyncTask #4]
<7>[ 4258.602286] (0)WQ_WARN: cpu:0, proc:kworker/0:1, [thermal_zone_device_check+0x0/0x18]dur: 310096769 > 15ms
<7>[ 4258.604567] (0)[14970:AsyncTask #4] set proc[14970] name: ->[dmesg]
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=ALPS.ICS2.MP.V1
ro.build.version.incremental=eng.jlhong.1366167558
ro.custom.build.version=i9400_PR_ninetology_F4_V17
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2013年 04月 17日 星期三 11:03:13 CST
ro.build.date.utc=1366167793
ro.build.type=user
ro.build.user=jlhong
ro.build.host=jlhong-Studio-540
ro.build.tags=test-keys
ro.product.model=i9400
ro.product.brand=ninetology
ro.product.name=s8073
ro.product.device=s8073
ro.product.board=s8073
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=alps
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=s8073
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=s8073-user 4.0.4 IMM76D eng.jlhong.1366167558 test-keys
ro.build.fingerprint=ninetology/s8073/s8073:4.0.4/IMM76D/1366167558:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/emmc@usrdata
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=true
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=0
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
net.tinno.bt.name=I9400
ro.tinno.build.version=i9400_PR_ninetology_F4_V21
ro.internal.build.version=i9400_PR_ninetology_F4_V21
wifi.net.ssid_default=I9400
ro.config.notification_sound=Amenity.ogg
ro.config.alarm_alert=RingingAlarm.ogg
ro.config.ringtone=Dazzle.ogg
ro.product.board=i9400
ro.build.product=i9400
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
devinfo 840 0 - Live 0xbf110000 (P)
devapc 4553 0 - Live 0xbf10b000 (P)
sec 90369 0 - Live 0xbf0ee000 (P)
vcodec_kernel_driver 28254 2 - Live 0xbf0e2000 (P)
m4u 113419 22 - Live 0xbf0bd000 (P)
ccmni 17126 0 - Live 0xbf0b4000 (P)
ccci 116351 11 ccmni, Live 0xbf08c000 (P)
ccci_plat 127254 2 ccmni,ccci, Live 0xbf063000 (P)
mtk_drvb_77 6081 0 - Live 0xbf05e000 (P)
mtklfb 23558 0 - Live 0xbf054000
pvrsrvkm 233127 97 mtklfb, Live 0xbf00d000
mtk_hwe 1394 0 - Live 0xbf009000 (P)
aed 16380 3 - Live 0xbf000000 (P)
RAM: 512 MB (486 MB available)
System RAM: 486.000MB
mtkfb.0: 4.000MB
Flash: 4 GB (3.589 GB actual); 8 GB (7.402 GB actual)
mmcblk0: 3.589 GB
mmcblk1: 7.402 GB
触摸屏为 alps i9400
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
新电池 alps i9400
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
占地面积 alps i9400
$7.74 1pc ALPS 27 Type 8Pins Duplex Volume Potentiometer 50KA/100KAx2 With Equal Loudness Tap 25mm Handle Plum Shaft
$4.2 ALPS EC11 Rotary Encoder with Switch SMD EC11J1524413 Pulse Switch
$105.1 1pcs Japanese original ALPS RK27 round handle blue shell dual fever volume potentiometer A10K 50K 100K 250K
$25.1 100% new Japan 1pcs ALPS RK163 B10KX2 B50KX2 B100KX2 Audio Dual-unit Rotary Potentiometer 6Pins 20mm shaft 10k 50k 100k
$44.9 1PCS RH2702 Resistance stepping Dual-unit Rotentiometer A50KX2 A100KX2 A250KX2 8pins ALPS RK27 Floral Axis 25mm
$7.56 1PCS 100% NEW ALPS RK27 Volume LOG Stereo Potentiometer 2-gang Dual RK27 10K/20K/50K/100K/250KA X2 Potentiometer Round handle
$5.82 Rotary Potentiometer 50K / 100K LOG ALPS RH2702 Audio Volume Control Pot Stereo W Loudness L
$1.58 5pcs Original for ALPS alpine EC10E1220505 mouse roller encoder 7MM mouse roller switch
$3.3 Potentiometer 250K Log Alps Audio Amp Volume Control Pot Stereo W Loudness Potentiometers
$9.45 1pcs for casio electric piano pX-100 CTK900 electronic organ for ALPS volume potentiometer B502 5 pin
Find Similar devices | |
---|---|
Same CPU: | |
Same Display resolution: | |
Same ro.build.description: | |