1. Установить SpecDevice
2. Запустить, сформируется спецификация
3. Скопировать ссылку (подробнее...)
| Основные характеристики | |
|---|---|
| Производитель | sprd |
| Модель | GT-T9500 |
| Версия Andriod | 4.2.0; W12.20_P20.01; SDK10 |
| Процессор | 1 core; ARMv7 Processor rev 1 (v7l) sprdbp; Max: 1000,0 MHz; Min: 400,0 MHz |
| Дисплей | 854 x 480; DPI: 240; Evaluated Size: 4,1" |
| Сенсорный экран | Multitouch 2 points |
| Графический ускоритель | Mali-300; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0 |
| ОЗУ | 256 MB (240 MB available) |
| Память | 8 GB (7.285 GB actual); 0.5 GB (0.447 GB actual) (см. вкладку "Память") |
| Связь | |
| Телефон | GSM; Net: EDGE |
| WiFi | rda5890; IEEE 802.11 b/g; RDA Microelectronics |
| USB Host | No |
| Bluetooth | Bluetooth v2.1 + EDR |
| GPS | Yes |
| Установленные компоненты | |
| Главная камера | Photo: 3.1 MP; Max: 2048x1536; Focus: auto auto-multi macro; Flash modes: off on torch |
| Доп. камера | Photo: 1.9 MP; Max size: 1600x1200; Focus: auto; No flash |
| Датчики | AK8975 3-axis Magnetic field sensor (Asahi Kasei Microdevices); range: 0...1228,8; resolution: 0,06 (0,005%); power: 0,35mA; |
| MM3A310 3-axis Accelerometer (MMA); range: 0...19,613; resolution: 0,01 (0,049%); power: 0,145mA; | |
| AP3212C Light sensor (LITEON); range: 0...1; resolution: 100000 (10000000%); power: 0,005mA; | |
| AP3212C Proximity sensor (LITEON); range: 0...1; resolution: 1 (100%); power: 0,005mA; | |
| Gravity Sensor (Google Inc.); range: 0...19,613; resolution: 0,01 (0,049%); power: 0,145mA; | |
| Linear Acceleration Sensor (Google Inc.); range: 0...19,613; resolution: 0,01 (0,049%); power: 0,145mA; | |
| Rotation Vector Sensor (Google Inc.); range: 0...1; resolution: 0 (0%); power: 0,495mA; | |
| Вибратор | Yes |
| Языки | 57; Amharic; Arabic; Bulgarian; Bengali; Tibetan; Catalan; Cebuano; Czech; Danish; German; Greek; English; Spanish; Persian; Finnish; Filipino; French; Gujarati; Hausa; Hebrew; Hindi; Croatian; Hungarian; Indonesian; Italian; Japanese; Georgian; Kazakh; Khmer; Korean; Lao; Lithuanian; Latvian; Malay; Burmese; Norwegian; Dutch; Punjabi; Polish; Portuguese; Romanian; Russian; Slovak; Slovenian; Serbian; Swedish; Swahili; Tamil; Telugu; Thai; Tagalog; Turkish; Uighur; Ukrainian; Urdu; Vietnamese; Chinese |
| Аккумулятор | Technology: Li-ion; Voltage: 3479 |
| FM radio | Supported by chipset |
| SD Version: | 1.1 5 |
KERNEL: Linux version 2.6.35.7 (zhaoyong@ubuntu) (gcc version 4.4.3 (GCC) ) #3 Fri Jul 19 10:48:39 CST 2013
CODENAME: REL
Mainboard: sp6820a
BRAND: sprd
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: hsdroid
DISPLAY: MT6589-C920-EN-V05
FINGERPRINT: sprd/sprdroid_base/hsdroid:4.2.0/MocorDroid2.3.5/W12.20_P20.01:user/test-keys
HARDWARE: sp6820a
ID: MocorDroid2.3.5
TAGS: test-keys
Processor : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1024.00
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc05
CPU revision : 1
Hardware : SP6820A
Revision : 0101
Serial : 0000000000000000
GL_OES_texture_npot
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_EXT_shader_texture_lod
<6>[ 849.612000] [mm3a310] mm3a310: x= -86, y=887, z=350
<6>[ 849.636000] [mm3a310] mm3a310: x= -85, y=888, z=353
<6>[ 849.663000] [mm3a310] mm3a310: x= -83, y=880, z=365
<6>[ 849.680000] [mm3a310] mm3a310: x= -83, y=877, z=375
<6>[ 849.701000] [mm3a310] mm3a310: x= -81, y=877, z=361
<6>[ 849.717000] [mm3a310] mm3a310: x= -81, y=887, z=340
<6>[ 849.738000] [mm3a310] mm3a310: x= -87, y=888, z=333
<6>[ 849.757000] [mm3a310] mm3a310: x= -86, y=887, z=333
<6>[ 849.777000] [mm3a310] mm3a310: x= -85, y=886, z=343
<6>[ 849.803000] [mm3a310] mm3a310: x= -84, y=897, z=323
<6>[ 849.837000] [mm3a310] mm3a310: x= -84, y=894, z=320
<6>[ 849.856000] ***rda5990_wf_setup_A2_power start!
<6>[ 849.857000] ***0xA2 readback value enable :0xD107
<6>[ 849.859000] ***rda5990_wf_setup_A2_power succeed!
<6>[ 849.860000] [mm3a310] mm3a310: x= -82, y=888, z=329
<6>[ 849.876000] ***rda_wifi_en_succceed
<6>[ 849.898000] ***rda_wifi_rf_init_succceed
<6>[ 849.902000] [mm3a310] mm3a310: x= -82, y=889, z=321
<6>[ 849.919000] [mm3a310] mm3a310: x= -84, y=884, z=312
<6>[ 849.940000] ***rda_wifi_rf_dc_calsuccceed
<6>[ 849.941000] [mm3a310] mm3a310: x= -81, y=886, z=304
<6>[ 849.957000] [mm3a310] mm3a310: x= -76, y=894, z=310
<6>[ 849.996000] [mm3a310] mm3a310: x= -80, y=885, z=318
<6>[ 850.017000] [mm3a310] mm3a310: x= -83, y=878, z=324
<6>[ 850.040000] [mm3a310] mm3a310: x= -83, y=872, z=311
<6>[ 850.067000] [mm3a310] mm3a310: x= -83, y=873, z=304
<6>[ 850.089000] [mm3a310] mm3a310: x= -82, y=872, z=304
<6>[ 850.096000] ***rda_wifi_dig_reset
<6>[ 850.107000] [mm3a310] mm3a310: x= -81, y=871, z=320
<6>[ 850.126000] ***0x2c readback value :0x8844
<6>[ 850.128000] [mm3a310] mm3a310: x= -80, y=876, z=320
<6>[ 850.145000] ***rda_wifi_check_pll.
<6>[ 850.145000] rda_wifi_power_on_succeed!!
<6>[ 850.145000] rda_5990_pw_ioctl cmd=0x7510 .
<6>[ 850.147000] [mm3a310] mm3a310: x= -80, y=876, z=332
<6>[ 850.167000] [mm3a310] mm3a310: x= -80, y=876, z=327
<6>[ 850.196000] [mm3a310] mm3a310: x= -79, y=874, z=320
<6>[ 850.219000] [mm3a310] mm3a310: x= -78, y=875, z=326
<6>[ 850.239000] [mm3a310] mm3a310: x= -78, y=876, z=319
<6>[ 850.261000] [mm3a310] mm3a310: x= -78, y=876, z=313
<6>[ 850.280000] [mm3a310] mm3a310: x= -78, y=880, z=312
<6>[ 850.298000]
<6>[ 850.298000] RDA5890 SDIO WIFI Driver For SPRD Platform.
<6>[ 850.298000] Ver: 1.5.3
<6>[ 850.298000]
<6>[ 850.301000] [mm3a310] mm3a310: x= -78, y=880, z=313
<6>[ 850.319000] [mm3a310] mm3a310: x= -78, y=877, z=330
<6>[ 850.342000] [mm3a310] mm3a310: x= -76, y=884, z=334
<6>[ 850.361000] [mm3a310] mm3a310: x= -80, y=896, z=322
<6>[ 850.387000] [mm3a310] mm3a310: x= -83, y=893, z=316
<6>[ 850.407000] [mm3a310] mm3a310: x= -81, y=888, z=308
<6>[ 850.427000] [mm3a310] mm3a310: x= -77, y=884, z=313
<6>[ 850.447000] [mm3a310] mm3a310: x= -74, y=884, z=320
<6>[ 850.466000] [mm3a310] mm3a310: x= -73, y=886, z=320
<6>[ 850.487000] [mm3a310] mm3a310: x= -74, y=891, z=326
<6>[ 850.507000] [mm3a310] mm3a310: x= -74, y=889, z=331
<6>[ 850.535000] [mm3a310] mm3a310: x= -73, y=890, z=335
<6>[ 850.553000] [mm3a310] mm3a310: x= -73, y=894, z=335
<6>[ 850.567000] [mm3a310] mm3a310: x= -72, y=897, z=335
<6>[ 850.598000] [mm3a310] mm3a310: x= -73, y=894, z=316
<6>[ 850.618000] [mm3a310] mm3a310: x= -74, y=892, z=301
<6>[ 850.639000] [mm3a310] mm3a310: x= -74, y=890, z=311
<6>[ 850.657000] [mm3a310] mm3a310: x= -78, y=891, z=319
<6>[ 850.677000] [mm3a310] mm3a310: x= -77, y=901, z=313
<6>[ 850.697000] [mm3a310] mm3a310: x= -77, y=906, z=305
<6>[ 850.719000] [mm3a310] mm3a310: x= -77, y=904, z=308
<6>[ 850.738000] [mm3a310] mm3a310: x= -77, y=903, z=308
<6>[ 850.757000] [mm3a310] mm3a310: x= -77, y=899, z=304
<6>[ 850.777000] [mm3a310] mm3a310: x= -74, y=892, z=310
<6>[ 850.797000] [mm3a310] mm3a310: x= -73, y=884, z=312
<6>[ 850.820000] [mm3a310] mm3a310: x= -72, y=874, z=329
<6>[ 850.838000] [mm3a310] mm3a310: x= -70, y=872, z=336
<6>[ 850.857000] [mm3a310] mm3a310: x= -68, y=876, z=333
<6>[ 850.877000] [mm3a310] mm3a310: x= -66, y=880, z=331
<6>[ 850.897000] [mm3a310] mm3a310: x= -64, y=883, z=335
<6>[ 850.917000] [mm3a310] mm3a310: x= -76, y=880, z=348
<6>[ 850.939000] [mm3a310] mm3a310: x= -80, y=892, z=346
<6>[ 850.958000] [mm3a310] mm3a310: x= -80, y=892, z=325
<6>[ 850.977000] [mm3a310] mm3a310: x= -79, y=890, z=321
<6>[ 850.997000] [mm3a310] mm3a310: x= -77, y=882, z=321
<6>[ 851.017000] [mm3a310] mm3a310: x= -77, y=888, z=318
<6>[ 851.038000] [mm3a310] mm3a310: x= -77, y=887, z=337
<6>[ 851.057000] [mm3a310] mm3a310: x= -75, y=873, z=352
<6>[ 851.077000] [mm3a310] mm3a310: x= -79, y=868, z=352
<6>[ 851.110000] [mm3a310] mm3a310: x= -85, y=864, z=330
<6>[ 851.131000] [mm3a310] mm3a310: x= -83, y=864, z=319
<6>[ 851.153000] [mm3a310] mm3a310: x= -81, y=864, z=319
<6>[ 851.167000] [mm3a310] mm3a310: x= -79, y=864, z=313
<6>[ 851.187000] [mm3a310] mm3a310: x= -79, y=873, z=302
<6>[ 851.207000] [mm3a310] mm3a310: x= -79, y=877, z=302
<6>[ 851.227000] [mm3a310] mm3a310: x= -77, y=875, z=305
<6>[ 851.247000] [mm3a310] mm3a310: x= -77, y=873, z=320
<6>[ 851.270000] [mm3a310] mm3a310: x= -84, y=872, z=323
<6>[ 851.297000] [mm3a310] mm3a310: x= -84, y=873, z=332
<4>[ 851.320000] sdhci_bus_scan, entry
<6>[ 851.321000] rda_5990_pw_ioctl cmd=0x7515 .
<4>[ 851.324000] SDIO1: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[ 851.325000] mmc1, clock_control:0x8007
<6>[ 851.328000] [mm3a310] mm3a310: x= -81, y=874, z=332
<6>[ 851.399000] [mm3a310] mm3a310: x= -79, y=875, z=332
<4>[ 851.402000] mmc_sdio_init_card: old_card (null)
<4>[ 851.403000] mmc_sdio_init_card: save_rca 21885
<4>[ 851.404000] mmc_sdio_init_card:329 About to select card c3ec8a00
<4>[ 851.408000] mmc1: queuing unknown CIS tuple 0x10 (5 bytes)
<4>[ 851.415000] cistpl_funce_common
<4>[ 851.417000] mmc1, clock_control:0x807
<6>[ 851.419000] [mm3a310] mm3a310: x= -78, y=870, z=336
<4>[ 851.420000] mmc1: queuing unknown CIS tuple 0x10 (5 bytes)
<6>[ 851.429000] mmc1: new SDIO card at address 557d
<4>[ 851.434000] ******version 45
<6>[ 851.434000] rda5890_sdio_init <<<
<6>[ 851.438000] [mm3a310] mm3a310: x= -78, y=869, z=336
<3>[ 851.445000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.445000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.456000] [mm3a310] mm3a310: x= -78, y=871, z=330
<3>[ 851.465000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.465000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.477000] [mm3a310] mm3a310: x= -77, y=872, z=328
<3>[ 851.486000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.486000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.497000] [mm3a310] mm3a310: x= -77, y=873, z=327
<3>[ 851.506000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.506000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<3>[ 851.528000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.528000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.529000] [mm3a310] mm3a310: x= -77, y=868, z=316
<3>[ 851.545000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.553000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.555000] [mm3a310] mm3a310: x= -76, y=861, z=314
<3>[ 851.574000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.574000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.584000] [mm3a310] mm3a310: x= -80, y=864, z=318
<3>[ 851.602000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.602000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.603000] [mm3a310] mm3a310: x= -86, y=880, z=316
<3>[ 851.630000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.630000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.631000] [mm3a310] mm3a310: x= -84, y=886, z=320
<3>[ 851.645000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.645000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.646000] [mm3a310] mm3a310: x= -83, y=882, z=320
<3>[ 851.678000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.678000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.680000] [mm3a310] mm3a310: x= -85, y=876, z=320
<3>[ 851.696000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.696000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.698000] [mm3a310] mm3a310: x= -84, y=874, z=326
<3>[ 851.716000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.716000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.717000] [mm3a310] mm3a310: x= -82, y=878, z=322
<3>[ 851.740000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.741000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.741000] [mm3a310] mm3a310: x= -81, y=869, z=319
<3>[ 851.756000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.756000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.757000] [mm3a310] mm3a310: x= -84, y=862, z=300
<3>[ 851.775000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.775000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.777000] [mm3a310] mm3a310: x= -81, y=860, z=279
<3>[ 851.795000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.795000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.796000] [mm3a310] mm3a310: x= -77, y=852, z=278
<3>[ 851.815000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.816000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.817000] [mm3a310] mm3a310: x= -76, y=854, z=286
<3>[ 851.851000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.851000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.852000] [mm3a310] mm3a310: x= -76, y=853, z=292
<3>[ 851.870000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.870000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.871000] [mm3a310] mm3a310: x= -75, y=852, z=310
<3>[ 851.888000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.888000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.890000] [mm3a310] mm3a310: x= -74, y=848, z=321
<3>[ 851.906000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.906000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.907000] [mm3a310] mm3a310: x= -74, y=851, z=336
<3>[ 851.925000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.925000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.926000] [mm3a310] mm3a310: x= -72, y=856, z=358
<3>[ 851.946000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.946000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.947000] [mm3a310] mm3a310: x= -73, y=855, z=363
<3>[ 851.968000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.969000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.970000] [mm3a310] mm3a310: x= -73, y=860, z=367
<3>[ 851.985000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 851.986000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 851.987000] [mm3a310] mm3a310: x= -73, y=870, z=373
<3>[ 852.029000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.029000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.030000] [mm3a310] mm3a310: x= -71, y=872, z=375
<3>[ 852.052000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.056000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.057000] [mm3a310] mm3a310: x= -70, y=871, z=361
<3>[ 852.075000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.075000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.084000] sdio_patch_complete wid_msg = 28
<6>[ 852.085000] [mm3a310] mm3a310: x= -70, y=867, z=337
<6>[ 852.104000] [mm3a310] mm3a310: x= -70, y=864, z=340
<3>[ 852.115000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.115000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.116000] [mm3a310] mm3a310: x= -70, y=861, z=336
<3>[ 852.136000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.145000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.146000] [mm3a310] mm3a310: x= -70, y=868, z=339
<3>[ 852.165000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.172000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.173000] [mm3a310] mm3a310: x= -70, y=873, z=339
<3>[ 852.194000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.194000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.195000] [mm3a310] mm3a310: x= -68, y=880, z=336
<3>[ 852.211000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.219000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.220000] [mm3a310] mm3a310: x= -68, y=877, z=333
<3>[ 852.248000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.248000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.249000] [mm3a310] mm3a310: x= -66, y=880, z=333
<3>[ 852.268000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.275000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.276000] [mm3a310] mm3a310: x= -72, y=886, z=312
<4>[ 852.282000] RTC ***** interrupt happen
<4>[ 852.282000] linux nk_sprd_unmask_ana_irq 34, int_enable = 0xe6a5dde0
<3>[ 852.286000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.286000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.300000] [mm3a310] mm3a310: x= -73, y=882, z=295
<3>[ 852.305000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.312000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.316000] [mm3a310] mm3a310: x= -72, y=876, z=312
<3>[ 852.329000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.329000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.346000] [mm3a310] mm3a310: x= -71, y=880, z=301
<3>[ 852.346000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.347000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<3>[ 852.365000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.365000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.367000] [mm3a310] mm3a310: x= -71, y=880, z=299
<3>[ 852.385000] RDA5890: rda5890_wid_request_polling: read PKTLEN_L reg size_l:4
<3>[ 852.392000] RDA5890: rda5890_wid_request_polling: read PKTLEN_H reg size_h:0
<6>[ 852.408000] [mm3a310] mm3a310: x= -71, y=880, z=316
<6>[ 852.444000] [mm3a310] mm3a310: x= -72, y=874, z=332
<6>[ 852.468000] [mm3a310] mm3a310: x= -72, y=881, z=320
<4>[ 852.497000] lock state atomic:0,interrupt:0,irq:0.
<6>[ 852.498000] [mm3a310] mm3a310: x= -73, y=890, z=332
<6>[ 852.531000] [mm3a310] mm3a310: x= -73, y=891, z=330
<6>[ 852.543000] RDA5890: SDIO card started
<6>[ 852.574000] [mm3a310] mm3a310: x= -72, y=886, z=322
<6>[ 852.612000] [mm3a310] mm3a310: x= -71, y=891, z=324
<6>[ 852.633000] [mm3a310] mm3a310: x= -76, y=895, z=339
<6>[ 852.652000] [mm3a310] mm3a310: x= -75, y=883, z=336
<6>[ 852.670000] [mm3a310] mm3a310: x= -75, y=876, z=327
<6>[ 852.690000] [mm3a310] mm3a310: x= -74, y=883, z=328
<6>[ 852.707000] [mm3a310] mm3a310: x= -78, y=892, z=329
<6>[ 852.726000] [mm3a310] mm3a310: x= -81, y=890, z=330
<6>[ 852.755000] [mm3a310] mm3a310: x= -78, y=885, z=328
<6>[ 852.778000] [mm3a310] mm3a310: x= -77, y=887, z=332
<6>[ 852.814000] [mm3a310] mm3a310: x= -77, y=888, z=332
<6>[ 852.827000] [mm3a310] mm3a310: x= -77, y=889, z=339
<4>[ 852.831000] mmc resume deferred in mmc_blk_issue_rq
<4>[ 852.831000] mmc0: Starting deferred resume
<4>[ 852.831000] SDIO0: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[ 852.832000] mmc0, clock_control:0x8007
<6>[ 852.852000] [mm3a310] mm3a310: x= -75, y=890, z=341
<6>[ 852.867000] [mm3a310] mm3a310: x= -72, y=885, z=331
<6>[ 852.887000] [mm3a310] mm3a310: x= -71, y=884, z=316
<6>[ 852.908000] [mm3a310] mm3a310: x= -71, y=886, z=320
<4>[ 852.912000] mmc0, clock_control:0xe0107
<6>[ 852.913000] mmc0: Deferred resume completed
<6>[ 852.932000] [mm3a310] mm3a310: x= -71, y=885, z=323
<6>[ 852.948000] [mm3a310] mm3a310: x= -71, y=884, z=341
<6>[ 852.967000] [mm3a310] mm3a310: x= -71, y=886, z=340
<6>[ 852.987000] [mm3a310] mm3a310: x= -70, y=891, z=342
<6>[ 853.006000] [mm3a310] mm3a310: x= -68, y=886, z=344
<6>[ 853.027000] [mm3a310] mm3a310: x= -66, y=879, z=345
<6>[ 853.047000] [mm3a310] mm3a310: x= -66, y=870, z=346
<6>[ 853.067000] [mm3a310] mm3a310: x= -62, y=869, z=335
<6>[ 853.094000] [mm3a310] mm3a310: x= -62, y=874, z=341
<6>[ 853.095000] rtc alarm set at 1409461792, now 1409461779, rtc delta 0.784999999
<6>[ 853.107000] [mm3a310] mm3a310: x= -62, y=881, z=340
<6>[ 853.134000] [mm3a310] mm3a310: x= -60, y=881, z=333
<6>[ 853.181000] [mm3a310] mm3a310: x= -60, y=881, z=315
<6>[ 853.232000] [mm3a310] mm3a310: x= -60, y=878, z=328
<6>[ 853.265000] [mm3a310] mm3a310: x= -58, y=869, z=348
<6>[ 853.286000] [mm3a310] mm3a310: x= -57, y=868, z=364
<6>[ 853.335000] [mm3a310] mm3a310: x= -57, y=861, z=356
<6>[ 853.352000] [mm3a310] mm3a310: x= -57, y=856, z=343
<6>[ 853.376000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[ 853.378000] [mm3a310] mm3a310: x= -52, y=852, z=339
<6>[ 853.406000] [mm3a310] mm3a310: x= -45, y=839, z=316
<6>[ 853.434000] [mm3a310] mm3a310: x= -45, y=832, z=298
<6>[ 853.447000] [mm3a310] mm3a310: x= -44, y=826, z=268
<6>[ 853.467000] [mm3a310] mm3a310: x= -42, y=815, z=250
<6>[ 853.489000] [mm3a310] mm3a310: x= -39, y=800, z=242
<6>[ 853.512000] [mm3a310] mm3a310: x= -37, y=768, z=264
<4>[ 853.515000] === mmc0: no requests, auto suspend host ===
<4>[ 853.515000] SDIO0: sdhci_sprd_set_ahb_clock, set ahb clk:0
<4>[ 853.515000] === mmc: host auto-suspend done ===
<6>[ 853.535000] [mm3a310] mm3a310: x= -34, y=762, z=291
<6>[ 853.547000] [mm3a310] mm3a310: x= -30, y=779, z=309
<6>[ 853.573000] [mm3a310] mm3a310: x= -28, y=802, z=311
<6>[ 853.605000] [mm3a310] mm3a310: x= -28, y=811, z=351
<6>[ 853.635000] [mm3a310] mm3a310: x= -27, y=812, z=389
<6>[ 853.665000] [mm3a310] mm3a310: x= 10, y=812, z=432
<6>[ 853.677000] [mm3a310] mm3a310: x= 40, y=812, z=457
<6>[ 853.714000] [mm3a310] mm3a310: x= 41, y=804, z=471
<6>[ 853.727000] [mm3a310] mm3a310: x= 41, y=797, z=464
<6>[ 853.747000] [mm3a310] mm3a310: x= 48, y=792, z=429
<6>[ 853.768000] [mm3a310] mm3a310: x= 89, y=784, z=411
<6>[ 853.786000] [mm3a310] mm3a310: x= 116, y=772, z=393
<6>[ 853.818000] [mm3a310] mm3a310: x= 113, y=759, z=397
<6>[ 853.838000] [mm3a310] mm3a310: x= 105, y=739, z=426
<6>[ 853.857000] [mm3a310] mm3a310: x= 96, y=710, z=478
<6>[ 853.877000] [mm3a310] mm3a310: x= 93, y=696, z=536
<6>[ 853.900000] [mm3a310] mm3a310: x= 91, y=697, z=560
<6>[ 853.916000] [mm3a310] mm3a310: x= 89, y=704, z=576
<6>[ 853.937000] [mm3a310] mm3a310: x= 84, y=707, z=576
<6>[ 853.957000] [mm3a310] mm3a310: x= 48, y=700, z=579
<6>[ 853.977000] [mm3a310] mm3a310: x= 4, y=692, z=594
<6>[ 853.999000] [mm3a310] mm3a310: x= -28, y=688, z=596
<3>[ 854.016000] RDA5890: rda5890_set_wap: rda5890_set_wap <<<
<3>[ 854.016000] connect mac: 0: 0: 0: 0: 0: 0
<6>[ 854.032000] [mm3a310] mm3a310: x= -28, y=682, z=604
<6>[ 854.048000] [mm3a310] mm3a310: x= 12, y=680, z=649
<6>[ 854.067000] [mm3a310] mm3a310: x= 48, y=666, z=679
<6>[ 854.104000] [mm3a310] mm3a310: x= 13, y=686, z=693
<6>[ 854.116000] [mm3a310] mm3a310: x= -40, y=699, z=714
<4>[ 854.136000] lock state atomic:0,interrupt:0,irq:0.
<6>[ 854.137000] [mm3a310] mm3a310: x= -83, y=697, z=715
<6>[ 854.166000] [mm3a310] mm3a310: x= -75, y=711, z=704
<6>[ 854.187000] [mm3a310] mm3a310: x= -85, y=719, z=713
<6>[ 854.206000] [mm3a310] mm3a310: x= -125, y=735, z=720
<6>[ 854.227000] [mm3a310] mm3a310: x= -160, y=757, z=711
<6>[ 854.251000] [mm3a310] mm3a310: x= -179, y=778, z=707
<6>[ 854.267000] [mm3a310] mm3a310: x= -184, y=788, z=707
<6>[ 854.286000] [mm3a310] mm3a310: x= -188, y=790, z=681
<6>[ 854.314000] [mm3a310] mm3a310: x= -188, y=780, z=648
<6>[ 854.327000] [mm3a310] mm3a310: x= -186, y=768, z=631
<6>[ 854.352000] [mm3a310] mm3a310: x= -196, y=756, z=620
<6>[ 854.370000] [mm3a310] mm3a310: x= -204, y=743, z=599
<6>[ 854.387000] [mm3a310] mm3a310: x= -189, y=723, z=588
<6>[ 854.406000] [mm3a310] mm3a310: x= -168, y=697, z=573
<6>[ 854.429000] [mm3a310] mm3a310: x= -172, y=670, z=602
<6>[ 854.446000] [mm3a310] mm3a310: x= -179, y=664, z=638
<6>[ 854.467000] [mm3a310] mm3a310: x= -166, y=656, z=683
<6>[ 854.490000] [mm3a310] mm3a310: x= -160, y=662, z=728
<6>[ 854.507000] [mm3a310] mm3a310: x= -154, y=673, z=761
<6>[ 854.526000] [mm3a310] mm3a310: x= -164, y=692, z=765
<6>[ 854.547000] [mm3a310] mm3a310: x= -211, y=697, z=760
<6>[ 854.567000] [mm3a310] mm3a310: x= -264, y=680, z=743
<6>[ 854.587000] [mm3a310] mm3a310: x= -284, y=653, z=742
<6>[ 854.609000] [mm3a310] mm3a310: x= -276, y=641, z=756
<6>[ 854.626000] [mm3a310] mm3a310: x= -256, y=635, z=777
<6>[ 854.647000] [mm3a310] mm3a310: x= -234, y=627, z=791
<6>[ 854.667000] [mm3a310] mm3a310: x= -213, y=614, z=799
<6>[ 854.687000] [mm3a310] mm3a310: x= -200, y=594, z=790
<6>[ 854.706000] [mm3a310] mm3a310: x= -183, y=584, z=792
<6>[ 854.730000] [mm3a310] mm3a310: x= -176, y=580, z=784
<6>[ 854.747000] [mm3a310] mm3a310: x= -164, y=582, z=781
<6>[ 854.767000] [mm3a310] mm3a310: x= -151, y=581, z=784
<6>[ 854.787000] [mm3a310] mm3a310: x= -147, y=571, z=784
<6>[ 854.817000] [mm3a310] mm3a310: x= -149, y=569, z=778
<6>[ 854.837000] [mm3a310] mm3a310: x= -160, y=576, z=764
<6>[ 854.857000] [mm3a310] mm3a310: x= -176, y=582, z=762
<6>[ 854.877000] [mm3a310] mm3a310: x= -185, y=587, z=760
<6>[ 854.896000] [mm3a310] mm3a310: x= -186, y=591, z=756
<6>[ 854.917000] [mm3a310] mm3a310: x= -184, y=591, z=764
<6>[ 854.937000] [mm3a310] mm3a310: x= -173, y=588, z=764
<6>[ 854.956000] [mm3a310] mm3a310: x= -161, y=586, z=756
<6>[ 854.977000] [mm3a310] mm3a310: x= -158, y=581, z=768
<6>[ 854.997000] [mm3a310] mm3a310: x= -156, y=583, z=759
<6>[ 855.018000] [mm3a310] mm3a310: x= -148, y=588, z=752
<6>[ 855.037000] [mm3a310] mm3a310: x= -141, y=588, z=749
<6>[ 855.056000] [mm3a310] mm3a310: x= -141, y=592, z=749
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MocorDroid2.3.5
ro.build.display.id=MT6589-C920-EN-V05
ro.build.version.incremental=W12.20_P20.01
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=4.2.0
ro.build.date=2013年 07月 19日 星期五 10:38:21 CST
ro.build.date.utc=1374201501
ro.build.type=user
ro.build.user=zhaoyong
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=GT-T9500
ro.product.brand=sprd
ro.product.name=sprdroid_base
ro.product.device=hsdroid
ro.product.board=sp6820a
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=sprd
ro.wifi.channels=
ro.board.platform=sprdbp
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hsdroid
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sprdroid_base-user 4.2.0 MocorDroid2.3.5 W12.20_P20.01 test-keys
ro.build.fingerprint=sprd/sprdroid_base/hsdroid:4.2.0/MocorDroid2.3.5/W12.20_P20.01:user/test-keys
persist.sys.timezone=Asia/Shanghai
ro.product.carrier=
ro.product.locale.language=en
ro.product.locale.region=US
ro.msms.phone_count=2sim
# end build properties
#
# system.prop for hsdroid
#
#rild.libpath=/system/lib/libsp_ril.so
#wifi.interface = tiwlan0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 48
android.keylayout.sprd-keypad = /system/usr/keylayout/sprd-keypad.kl
android.keychar.sprd-keypad = /system/usr/keychars/sprd-keypad.kcm
ro.hardware =sphs
# Default network type
# 2 => AUTO Preferred.
ro.telephony.default_network = 2
# 1 => add volume control in in-call screen
ro.sprd.volume_control_icon = 1
ro.sf.lcd_density = 240
ro.sf.lcd_width = 45
ro.sf.lcd_height = 75
dalvik.vm.heapsize=32m
ro.opengles.version=131072
# add by_hgl for disable 3G
ro.device.support.vt=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone0=LoopyLounge.ogg
ro.config.ringtone1=LoopyLounge.ogg
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
persist.sys.language=ru
persist.sys.country=RU
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
rda5890 101333 0 - Live 0xbf0ae000
mm3a310 20299 1 - Live 0xbf088000
ft5306_ts 7865 1 - Live 0xbf080000
fm 14462 0 - Live 0xbf076000
headset 3345 0 - Live 0xbf070000
mali 260578 4 - Live 0xbf01f000
ump 54097 13 mali, Live 0xbf009000
snd_dummy 9403 0 - Live 0xbf000000
RAM: 256 MB (240 MB available)
System RAM: 1.238MB
System RAM: 238.242MB
Flash: 8 GB (7.285 GB actual); 0.5 GB (0.447 GB actual)
mmcblk0: 7.285 GB
mtdblock: 0.046 GB
mtdblock1: 0.447 GB
Тачскрин для sprd GT-T9500
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
$143.13 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
$55.08 Watch accessories men for Seiko No.5 SPRD/New SRPD SKX007 series Gasket front/back cover Teflon water proof ring dust seal ring
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
Новый аккумулятор для sprd GT-T9500
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$143.13 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
$55.08 Watch accessories men for Seiko No.5 SPRD/New SRPD SKX007 series Gasket front/back cover Teflon water proof ring dust seal ring
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
Чехлы для sprd GT-T9500
$23.78 Dia 2.5mm Fat Spring Bar Fits Seiko SKX007 SPRD Watch Bracelets Repair Tip Size 1.0mm Heavy Duty 20mm 22mm Strap Link Pins
$81.84 Special Modified Watch Needle C3 Green Luminous Watch Hands Fit Japan NH35A NH36A 7S 6R 4R For SKX007 SKX009 SPRD SPRE Tuna
$4.5 SPRD Power ic SC2720A SC2342A SC2342B SC2341B SC2721G SC2723G2 SC2712A SC2712B SC2712E
$99.51 Mod Sub Style Silver Gold Rosegold Polished Stainless Steel Watch Bezel For Seiko SKX007 New SPRD Men's Machinery Diving Watch
$28 [19]Flat 31.5*3.5mm Sapphire crystal For SEIKO SKX007 NEW SPRD MOD Watch glass AR blue Replacement parts
$2 SPRD Power ic SC2720A SC2721G SC2731G1 SC2712A SC2712B SC2712E
$44.47 30.5mm Chapter Ring SKX007 Inner Ring fit For Seiko SKX007 SPRD Watch Case Gold/Silver/Rose Ring Diving Watch Case Ring
$80.18 28.5mm Watch Dial NH35 NH36 Green Luminous Dial fits Seiko SKX007 SPRD 6105 Tuna Samurai SPB185 Watch Case NH35 NH36 Watch Dials
$48.2 SKX007 NH35 Watch Hands Fit NH36 NH35 Movement C3 Green Luminous Watch Hands for Seiko SKX007 SKX009 SPRD Men's Watches Repair
$35 Luminous Watch Hands NH35 Hands Fits Seiko SKX007 SKX009 SPRD Watch for NH36 NH36 4R35 7S Movement Men Watch Case Parts
$80.52 Watch Hands Fit Japan NH35A NH36A 7S 6R 4R With C3 Green Luminous For SKX007 SKX009 SPRD SPRE Tuna Canned Diving Turtle Watch
$28.87 30.5mm SKX007 Plastic Chapter Ring fits SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$53.35 Mod 30.5mm SKX007 Copper Chapter Ring fits Seiko SKX007 SKX009 SPRD Watch Case NH35 Case Inner Ring Men's Diving watch parts
$19 Stainless Steel Watch Strap 22mm Curved Solid End Links For Seiko SKX007/SPRD Watch Bracelet Oyster Brushed Finish With tools
$10 Black Watch Dial Parts Are Suitable for Seiko Skx007 Skx009 SPRD Fit sports NH35A NH36A 4R, 6R
$14.5 28.5mm Blue / Green Luminous Watch Dial Super bright calendar Parts For Seiko Skx007 Skx009 SPRD Fit Movement NH35A NH36A 4R, 6R
$14.5 22mm Diving Strap Steel Strap Watch Strap Replacement Accessories For Seiko No. 5 SKX007 SPRD series
$73.36 Seiko mod Watch Crown nh35 crown Engraved Signed 'S' Mod for Seiko SKX007 SKX009 SKX013 SPRD for 7s26 4R36 nh36 nh35 Movement
$55.08 Watch accessories men for Seiko No.5 SPRD/New SRPD SKX007 series Gasket front/back cover Teflon water proof ring dust seal ring
$143.13 NH35 NH36 Dial Green Luminous Watch Dial Fit for SKX007 SPRD 6105 Turtle Tuna Watch Case 28.5mm Watch Dials With Box Gifts Parts
| Найти похожие устройства | |
|---|---|
| Same CPU: | |
| Same Display resolution: | |
| Same ro.build.description: | |
