samsung SM-G903M
3 Steps to publish Your specification here:

1. Install SpecDevice
2. Run and decode your specs
3. Get your link (read more...)
General Specifications
Manufacturersamsung
ModelSM-G903M
Android version6.0.1; G800HXXU1BOI2; SDK22
CPU4 cores; Qualcomm MSM 8226 (Flattened Device Tree) msm8226; Max: 1401,6 MHz; Min: 300,0 MHz
Display1280 x 720; DPI: 320; Evaluated Size: 4,6"
Touch screenMultitouch 4 points
GPUAdreno (TM) 305; Qualcomm; OpenGL ES-CM 1.1; OpenGL ES 3.0 V@84.0 AU@ (CL@)
RAM1411 MB
Flash16 GB (14.676 GB actual); 1.000 GB; 4 GB (3.693 GB actual) (see memory map tab)
Communications
PhoneGSM; Net: HSPAP
WiFiwlan; IEEE 802.11 b/g/n; Qualcomm 8226; AP Mode
USB HostYes
BluetoothBluetooth 4.0
GPSYes
Advanced Features
Front cameraPhoto: 8.0 MP; Max: 3264x2448; Video: 2.1 MP; Max: 1920x1080; Focus: auto infinity macro continuous-video continuous-picture; Flash modes: off auto on torch
Back cameraPhoto: 1.9 MP; Max size: 1392x1392; Video: 0.9 MP; Max: 1280x720; Focus: fixed; Flash modes: off
SensorsMPU6500 Accelerometer Sensor (INVENSENSE); range: 0...19,613; resolution: 0,001 (0,006%); power: 0,25mA;
MPU6500 Gyroscope Sensor (INVENSENSE); range: 0...8,727; resolution: 0 (0,003%); power: 6,1mA;
YAS532 Magnetic field Sensor (Yamaha Corporation); range: 0...1200; resolution: 0,06 (0,005%); power: 6mA;
CM36651 Proximity Sensor (Capella Microsystems, Inc.); range: 0...8; resolution: 8 (100%); power: 0,75mA;
CM36651 Light Sensor (Capella Microsystems, Inc.); range: 0...60000; resolution: 1 (0,002%); power: 0,75mA;
Rotation Vector Sensor (AOSP); range: 0...1; resolution: 0 (0%); power: 12,35mA;
Gravity Sensor (AOSP); range: 0...19,613; resolution: 0,001 (0,006%); power: 12,35mA;
Linear Acceleration Sensor (AOSP); range: 0...19,613; resolution: 0,001 (0,006%); power: 12,35mA;
VibratorYes
Supported languages174; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bengali; Tibetan; Breton; Bodo; Bosnian; Catalan; Chiga; Cherokee; Czech; Welsh; Danish; Taita; German; Zarma; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Irish; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Cornish; Kyrgyz; Langi; Ganda; Lakota; Lingala; Lao; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Meta'; Macedonian; Malayalam; Mongolian; Marathi; Malay; Maltese; Mundang; Burmese; Nama; Norwegian; North Ndebele; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Oriya; Punjabi; Polish; Pashto; Portuguese; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Samburu; Sangu; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Congo Swahili; Tamil; Telugu; Teso; Tajik; Thai; Tigrinya; Turkmen; Tongan; Turkish; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Soga; Yangben; Yoruba; Standard Moroccan Tamazight; Chinese; Zulu
BatteryTechnology: Li-ion; Voltage: 3992
FM radioFM Radio
Owner's comment:gt-I9301I
SD Version:1.1 5

KERNEL: Linux version 3.4.0-gef9ab71-dirty (antonio@antonio-TravelMate-8472T) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Sat Feb 13 15:44:28 CET 2016
CODENAME: REL
Mainboard: MSM8228
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: noblelte
DISPLAY: LMY47X.G800HXXU1BPB2
FINGERPRINT: samsung/nobleltejv/noblelte:6.0.1/LMY47X/G800HXXU1BOI2:user/release-keys
HARDWARE: qcom
ID: LMY47X
TAGS: release-keys

Processor : ARMv7 Processor rev 3 (v7l)
processor : 0
BogoMIPS : 38.40
processor : 1
BogoMIPS : 38.40
processor : 2
BogoMIPS : 38.40
processor : 3
BogoMIPS : 38.40
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 3
Hardware : Qualcomm MSM 8226 (Flattened Device Tree)
Revision : 0004
Serial : 000000004de9bd03

GL_AMD_compressed_ATC_texture
GL_AMD_performance_monitor
GL_AMD_program_binary_Z400
GL_EXT_debug_label
GL_EXT_debug_marker
GL_EXT_discard_framebuffer
GL_EXT_robustness
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_type_2_10_10_10_REV
GL_NV_fence
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_depth_texture
GL_OES_depth24
GL_OES_EGL_image
GL_OES_EGL_sync
GL_OES_EGL_image_external
GL_OES_element_index_uint
GL_OES_fbo_render_mipmap
GL_OES_fragment_precision_high
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_depth_texture_cube_map
GL_OES_rgb8_rgba8
GL_OES_standard_derivatives
GL_OES_texture_3D
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_texture_half_float_linear
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_vertex_type_10_10_10_2
GL_OES_vertex_array_object
GL_QCOM_alpha_test
GL_QCOM_binning_control
GL_QCOM_driver_control
GL_QCOM_perfmon_global_mode
GL_QCOM_extended_get
GL_QCOM_extended_get2
GL_QCOM_tiled_rendering
GL_QCOM_writeonly_rendering
GL_EXT_sRGB
GL_EXT_sRGB_write_control
GL_EXT_texture_sRGB_decode
GL_EXT_texture_filter_anisotropic
GL_EXT_multisampled_render_to_texture
GL_EXT_color_buffer_float
GL_EXT_color_buffer_half_float
GL_EXT_disjoint_timer_query

<4>[ 1348.978721] wlan: module is from the staging directory, the quality is unknown, you have been warned.
<6>[ 1349.014056] wlan: loading driver v3.8.20.24
<3>[ 1349.025406] wlan: [1146:E :HDD] hdd_parse_config_ini: qcom_cfg.ini Size 7790
<3>[ 1349.026493] wlan: [1146:E :HDD] hdd_is_5g_supported: Hardware supports 5Ghz
<3>[ 1349.026509] wlan: [1146:E :HDD] hdd_is_5g_supported: Hardware supports 5Ghz
<3>[ 1349.042190] wlan: [1146:E :VOS] INFO: NV version = 2 is loaded, driver supports NV version = 3
<3>[ 1349.042210] wlan: [1146:E :VOS] INFO: Driver supports NV3 CH144 by default, NV2 is currently loaded, NV2 will be used.
<6>[ 1349.042312] DefaultCountry is GB
<3>[ 1349.043926] wlan: [1146:E :HDD] hdd_generate_iface_mac_addr_auto: Derived Mac Addr: 00:0a:f5:a6:f4:0c
<3>[ 1349.043945] wlan: [1146:E :HDD] hdd_generate_iface_mac_addr_auto: Derived Mac Addr: 00:0a:f5:a6:f4:0d
<3>[ 1349.043961] wlan: [1146:E :HDD] hdd_generate_iface_mac_addr_auto: Derived Mac Addr: 00:0a:f5:a6:f4:0e
<3>[ 1349.043977] wlan: [1146:E :HDD] hdd_generate_iface_mac_addr_auto: Derived Mac Addr: 00:0a:f5:a6:f4:0f
<4>[ 1349.147725] IRQ40 no longer affine to CPU1
<4>[ 1349.152314] IRQ40 no longer affine to CPU2
<6>[ 1349.836689] Debug Temp for Sensor:
<6>[ 1349.836767] (0 --- 51)(1 --- 50)(2 --- 52)(3 --- 51)(4 --- 51)(5 --- 53)
<4>[ 1350.058525] IRQ40 no longer affine to CPU3
<6>[ 1350.408230] !@Sync 44 [06-13 08:24:49.546]
<4>[ 1350.578572] IRQ40 no longer affine to CPU2
<4>[ 1350.589479] IRQ40 no longer affine to CPU3
<7>[ 1352.046045] BMS: bms_stay_awake: enabled source qpnp_soc_wake
<7>[ 1352.070951] BMS: recalculate_soc: batt_temp phy = 348 meas = 0x200000000
<7>[ 1352.071039] BMS: read_soc_params_raw: last_good_ocv_raw= 0x9999, last_good_ocv_uv= 4323000uV
<7>[ 1352.071050] BMS: read_soc_params_raw: cc_raw= 0xa116fd
<7>[ 1352.071091] BMS: calculate_soc_params: tm_sec = 215988, delta_s = 20
<7>[ 1352.071102] BMS: calculate_fcc: fcc = 2095000 uAh
<7>[ 1352.071110] BMS: calculate_soc_params: FCC = 2095000uAh batt_temp = 348
<7>[ 1352.071123] BMS: calculate_pc: pc = 100 % for ocv = 4323000 uv batt_temp = 224
<7>[ 1352.071133] BMS: calculate_ocv_charge: ocv_uv = 4323000 pc = 100
<7>[ 1352.071141] BMS: calculate_soc_params: ocv_charge_uah = 2095000uAh
<7>[ 1352.080271] BMS: calculate_cc: cc = 10557181, die_temp = 46672
<7>[ 1352.080283] BMS: cc_adjust_for_gain: adjusting_uv = 57276401
<7>[ 1352.080293] BMS: cc_adjust_for_gain: adjusting by factor: 3291/3257 = 101%
<7>[ 1352.080302] BMS: cc_adjust_for_gain: result_uv = 57874312
<7>[ 1352.080312] BMS: calculate_cc: software_cc = 170686, added cc_uah = 2747
<7>[ 1352.080322] BMS: reset_cc: resetting cc manually with flags 128
<7>[ 1352.089613] BMS: calculate_cc: shdw_cc = 10554463, die_temp = 46574
<7>[ 1352.089626] BMS: cc_adjust_for_gain: adjusting_uv = 57261655
<7>[ 1352.089635] BMS: cc_adjust_for_gain: adjusting by factor: 3291/3257 = 101%
<7>[ 1352.089644] BMS: cc_adjust_for_gain: result_uv = 57859412
<7>[ 1352.089654] BMS: calculate_cc: software_sw_cc = 170594, added cc_uah = 2747
<7>[ 1352.089665] BMS: reset_cc: resetting cc manually with flags 64
<7>[ 1352.089818] BMS: calculate_soc_params: cc_uah = 173433uAh raw->cc = a116fd, shdw_cc_uah = 173341uAh raw->shdw_cc = a10c5f
<7>[ 1352.089833] BMS: calculate_soc_params: rbatt_mohm = 164
<7>[ 1352.089842] BMS: calculate_iavg: delta_cc = 2747 iavg_ua = 494460
<7>[ 1352.089851] BMS: calculate_unusable_charge_uah: iavg_samples_ma[0] = 352
<7>[ 1352.089860] BMS: calculate_unusable_charge_uah: iavg_samples_ma[1] = 411
<7>[ 1352.089869] BMS: calculate_unusable_charge_uah: iavg_samples_ma[2] = 297
<7>[ 1352.089878] BMS: calculate_unusable_charge_uah: iavg_samples_ma[3] = 376
<7>[ 1352.089887] BMS: calculate_unusable_charge_uah: iavg_samples_ma[4] = 596
<7>[ 1352.089896] BMS: calculate_unusable_charge_uah: iavg_samples_ma[5] = 663
<7>[ 1352.089906] BMS: calculate_unusable_charge_uah: iavg_samples_ma[6] = 494
<7>[ 1352.089916] BMS: calculate_unusable_charge_uah: iavg_samples_ma[7] = 250
<7>[ 1352.089928] BMS: calculate_unusable_charge_uah: iavg_samples_ma[8] = 250
<7>[ 1352.089948] BMS: calculate_unusable_charge_uah: iavg_samples_ma[9] = 250
<7>[ 1352.089964] BMS: calculate_unusable_charge_uah: iavg_samples_ma[10] = 250
<7>[ 1352.089973] BMS: calculate_unusable_charge_uah: iavg_samples_ma[11] = 250
<7>[ 1352.089982] BMS: calculate_unusable_charge_uah: iavg_samples_ma[12] = 250
<7>[ 1352.089991] BMS: calculate_unusable_charge_uah: iavg_samples_ma[13] = 417
<7>[ 1352.090000] BMS: calculate_unusable_charge_uah: iavg_samples_ma[14] = 313
<7>[ 1352.090009] BMS: calculate_unusable_charge_uah: iavg_samples_ma[15] = 275
<7>[ 1352.090030] BMS: calculate_pc: pc = 3 % for ocv = 3481168 uv batt_temp = 348
<7>[ 1352.090042] BMS: calculate_termination_uuc: For uuc_iavg_ma = 356, unusable_rbatt = 228 unusable_uv = 3481168 unusable_pc = 3 rbatt_pc = 3 uuc = 62850
<7>[ 1352.090056] BMS: calculate_unusable_charge_uah: uuc_iavg_ma = 356 uuc with iavg = 62850
<7>[ 1352.090071] BMS: calculate_soc_params: UUC = 62850uAh
<7>[ 1352.090106] BMS: calculate_raw_soc: RUC = 1858717uAh
<7>[ 1352.090119] BMS: calculate_state_of_charge: SOC before adjustment = 91
<7>[ 1352.094844] BMS: calculate_pc: pc = 70 % for ocv = 3979428 uv batt_temp = 348
<7>[ 1352.094863] BMS: adjust_soc: ibat_ua = 656800, vbat_uv = 3871713, ocv_est_uv = 3979428, pc_est = 70, soc_est = 69, n = 0, delta_ocv_uv = 0, last_ocv_uv = 4323000, pc_new = 0, soc_new = 0, rbatt = 164, slope = 0
<7>[ 1352.104185] BMS: get_battery_voltage: mvolts phy = 3881235 meas = 0x3b5f80
<7>[ 1352.104201] BMS: clamp_soc_based_on_voltage: not clamping, using soc = 91, vbat = 3881235 and cutoff = 3400000
<7>[ 1352.104213] BMS: calculate_state_of_charge: CC based calculated SOC = 91
<7>[ 1352.104229] BMS: calculate_state_of_charge: power supply changed
<7>[ 1352.104277] BMS: bms_relax: disabled source qpnp_soc_wake
<3>[ 1352.104303] qpnp_batt_external_power_changed: skip qpnp_batt_external_power_changed
<7>[ 1352.108863] BMS: report_cc_based_soc: batt_temp phy = 348 meas = 0x0
<7>[ 1352.108910] BMS: report_cc_based_soc: last_soc = 92, calculated_soc = 91, soc = 91, time since last change = 288
<6>[ 1352.108931] BMS: bms_get_scaled_capacity: bms_get_scaled_capacity: scaled capacity (91.0)
<7>[ 1352.108941] BMS: backup_soc_and_iavg: soc = 91, soc__ = 184
<7>[ 1352.108967] BMS: report_cc_based_soc: Reported SOC = 91
<6>[ 1352.108976] BMS: bms_get_scaled_capacity: bms_get_scaled_capacity: scaled capacity (91.0)
<7>[ 1352.108987] BMS: bms_check_changed_soc: prev_reported_soc = 92, soc = 91
<7>[ 1352.113756] BMS: cc_adjust_for_gain: adjusting_uv = 5376
<7>[ 1352.113768] BMS: cc_adjust_for_gain: adjusting by factor: 3291/3257 = 101%
<7>[ 1352.113777] BMS: cc_adjust_for_gain: result_uv = 5432
<7>[ 1352.113806] BMS: get_battery_current: vsense_uv=5432uV
<7>[ 1352.113816] BMS: get_battery_current: err compensated ibat=543200uA
<3>[ 1352.113834] power_supply bms: driver failed to report `current_avg` property: 4294967274
<4>[ 1352.257946] IRQ40 no longer affine to CPU2
<4>[ 1353.239755] IRQ40 no longer affine to CPU2
<7>[ 1353.648500] BMS: cc_adjust_for_gain: adjusting_uv = 4779
<7>[ 1353.648522] BMS: cc_adjust_for_gain: adjusting by factor: 3291/3257 = 101%
<7>[ 1353.648535] BMS: cc_adjust_for_gain: result_uv = 4828
<7>[ 1353.648566] BMS: get_battery_current: vsense_uv=4828uV
<7>[ 1353.648579] BMS: get_battery_current: err compensated ibat=482800uA
<4>[ 1353.707909] IRQ40 no longer affine to CPU2
<6>[ 1353.817108] [SENSOR] mpu6500_input_report_accel_xyz, -520, 11364, 12734 (Count = 50)
<6>[ 1354.846042] Debug Temp for Sensor:
<6>[ 1354.846095] (0 --- 49)(1 --- 48)(2 --- 49)(3 --- 49)(4 --- 50)(5 --- 51)
<4>[ 1356.797967] IRQ40 no longer affine to CPU1
<4>[ 1356.810871] IRQ40 no longer affine to CPU2
<2>[ 1359.086384] wlan: [27560:F :CTL] Timeout occurred while waiting for WDI_NV_DOWNLOAD_RESP (52) message from device - catastrophic failure, timeStampTmrStart: 1330359758, timeStampTmrExp: 1330369777
<2>[ 1359.086412] wlan: [27560:F :CTL] uArchTimeStampTmrStart: 58534500449 seconds, uArchTimeStampTmrExp: 58726866863 seconds
<3>[ 1359.086432] PRONTO_PMU_SPARE 0200002c
<3>[ 1359.086441] PRONTO_PMU_COM_CPU_CBCR 80000ff1
<3>[ 1359.086450] PRONTO_PMU_COM_AHB_CBCR 80000ff1
<3>[ 1359.086461] PRONTO_PMU_CFG 00400017
<3>[ 1359.086469] PRONTO_PMU_COM_CSR 00000001
<3>[ 1359.086478] PRONTO_PMU_SOFT_RESET 00000000
<3>[ 1359.086487] PRONTO_SAW2_SPM_STS 00fd018f
<3>[ 1359.086498] PRONTO_PLL_STATUS 00000000
<3>[ 1359.086508] PMU_CPU_CMD_RCGR 00000002
<3>[ 1359.086517] PRONTO_PMU_COM_GDSCR 00222002
<3>[ 1359.086535] Cannot log, Pronto common SS is power collapsed
<3>[ 1359.302067] Fatal error on the wcnss.
<3>[ 1359.302091] wcnss subsystem failure reason: boot_crash_debug.c:130:apps_wcnss_reset_req interrupt detected!
<6>[ 1359.302104] subsys-restart: subsystem_restart_dev(): Restart sequence requested for wcnss, restart_level = RELATED.
<6>[ 1359.303166] wcnss_notif_cb: wcnss notification event: 0
<6>[ 1359.303175] wcnss_pm_qos_add_request: add request
<6>[ 1359.303185] wcnss_pm_qos_update_request: update request 100
<6>[ 1359.303371] subsys-restart: subsystem_shutdown(): [e8889e00]: Shutting down wcnss
<4>[ 1359.308359] IRQ40 no longer affine to CPU3
<6>[ 1359.311574] wcnss_notif_cb: wcnss notification event: 1
<3>[ 1359.312269] wlan: [23:F :VOS] vos_watchdog_wlan_shutdown: WLAN driver is shutting down
<3>[ 1359.312288] wlan: [23:F :VOS] vos_watchdog_wlan_shutdown: Load/unload in Progress. Ignoring signaling Watchdog
<3>[ 1359.312491] Ramdump(ramdump_smem): No consumers. Aborting..
<3>[ 1359.312500] restart_notifier_cb: unable to dump smem -32
<3>[ 1359.313006] wcnss_notifier_cb: sysmon_send_event error -38
<6>[ 1359.313017] wcnss_notif_cb: wcnss notification event: 4
<6>[ 1359.314199] wcnss_notif_cb: wcnss notification event: 2
<6>[ 1359.314214] subsys-restart: subsystem_powerup(): [e8889e00]: Powering up wcnss
<6>[ 1359.319181] wcnss: IRIS Reg: 03000004
<6>[ 1359.856162] Debug Temp for Sensor:
<6>[ 1359.856196] (0 --- 51)(1 --- 48)(2 --- 53)(3 --- 49)(4 --- 49)(5 --- 53)
<6>[ 1360.363150] pil_pronto fb21b000.qcom,pronto: wcnss: loading from 0x0d200000 to 0x0d7ae000
<6>[ 1360.514075] pil_pronto fb21b000.qcom,pronto: wcnss: Brought out of reset
<4>[ 1360.514111] ------------[ cut here ]------------
<4>[ 1360.514124] WARNING: at /home/antonio/tw/kernel/s3ve3g/kernel/irq/manage.c:428 enable_irq+0x60/0x74()
<4>[ 1360.514134] Unbalanced enable for IRQ 181
<6>[ 1360.514140] Modules linked in: wlan(C+) [last unloaded: wlan]
<6>[ 1360.514173] [] (unwind_backtrace+0x0/0x11c) from [] (warn_slowpath_common+0x4c/0x64)
<6>[ 1360.514190] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_fmt+0x2c/0x3c)
<6>[ 1360.514206] [] (warn_slowpath_fmt+0x2c/0x3c) from [] (enable_irq+0x60/0x74)
<6>[ 1360.514225] [] (enable_irq+0x60/0x74) from [] (wcnss_powerup+0x34/0x84)
<6>[ 1360.514244] [] (wcnss_powerup+0x34/0x84) from [] (subsystem_powerup+0x5c/0xe0)
<6>[ 1360.514262] [] (subsystem_powerup+0x5c/0xe0) from [] (subsystem_restart_wq_func+0x320/0x408)
<6>[ 1360.514281] [] (subsystem_restart_wq_func+0x320/0x408) from [] (process_one_work+0x274/0x438)
<6>[ 1360.514299] [] (process_one_work+0x274/0x438) from [] (worker_thread+0x19c/0x2dc)
<6>[ 1360.514316] [] (worker_thread+0x19c/0x2dc) from [] (kthread+0x84/0x90)
<6>[ 1360.514335] [] (kthread+0x84/0x90) from [] (kernel_thread_exit+0x0/0x8)
<4>[ 1360.514346] ---[ end trace da227214a82491be ]---
<6>[ 1361.320423] pil_pronto fb21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
<3>[ 1361.349546] diag: In diag_send_msg_mask_update, invalid status 0
<3>[ 1361.349574] diag: In diag_send_log_mask_update, invalid status 0
<6>[ 1361.431915] pil_pronto fb21b000.qcom,pronto: Subsystem error monitoring/handling services are up
<6>[ 1361.432887] wcnss_notif_cb: wcnss notification event: 3
<6>[ 1361.432903] subsys-restart: subsystem_restart_wq_func(): [e8889e00]: Restart sequence for wcnss completed.
<6>[ 1361.690738] wcnss_pm_qos_update_request: update request -1
<6>[ 1361.690767] wcnss_pm_qos_remove_request: remove request
<3>[ 1361.692598] wcnss: incomplete header available len = 0
<3>[ 1361.692724] wcnss: incomplete header available len = 0
<3>[ 1361.694822] wlan: [27559:F :VOS] VosWDThread: Watchdog thread signaled to perform WLAN re-init
<3>[ 1361.694840] wlan: [27559:F :VOS] VosWDThread: Do WLAN re-init only when it is shutdown !!
<6>[ 1361.696749] wcnss: version 01050102
<6>[ 1361.696771] wcnss: schedule dnld work for pronto
<3>[ 1361.697033] wcnss: incomplete header available len = 0
<3>[ 1361.697063] wcnss: incomplete header available len = 0
<6>[ 1363.343194] dmesg (27811): undefined instruction: pc=b6dc1b88
<6>[ 1363.343215] Code: e320f000 e320f000 f26001f0 e12fff1e (ec510f1e)
<6>[ 1363.343368] dmesg (27811): undefined instruction: pc=b6e5df48
<6>[ 1363.343380] Code: ea000002 00000000 f26ee1fe e12fff1e (ee190f1d)

ro.build.id=LMY47X
ro.build.display.id=LMY47X.G800HXXU1BPB2
ro.build.version.incremental=G800HXXU1BOI2
ro.build.version.sdk=22
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.date=Fri Sep 18 14:56:50 KST 2015
ro.build.date.utc=1442555810
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWHD7305
ro.build.tags=release-keys
ro.build.flavor=nobleltejv-user
ro.product.model=SM-G903M
ro.product.brand=samsung
ro.product.name=zerofltexx
ro.product.device=noblelte
ro.product.board=MSM8228
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
ro.build.product=noblelte
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=nobleltejv-user 6.0.1 LMY47X G800HXXU1BOI2 release-keys
ro.build.fingerprint=samsung/nobleltejv/noblelte:6.0.1/LMY47X/G800HXXU1BOI2:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=G800HXXU1BOI2
ro.build.hidden_ver=G800HXXU1BOI2
ro.config.rm_preload_enabled=0
ro.build.changelist=5841973
ro.product_ship=true
ro.chipname=MSM8228
persist.sys.storage_preload=1
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=24
ro.hwui.layer_cache_size=16
ro.hwui.path_cache_size=4
ro.hwui.shape_cache_size=1
ro.hwui.gradient_cache_size=0.5
ro.hwui.drop_shadow_cache_size=2
ro.hwui.r_buffer_cache_size=2
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.hwui.fbo_cache_size=8
#
# from device/samsung/noblelte/system.prop
#
#
# system.prop for Millet LTE. excerpted from MSM8974 qcom original system.prop
#
DEVICE_PROVISIONED=1
ro.sf.lcd_density=320
# Enable time services daemon
persist.timed.enable=true
# Data modules (For evolution RIL model)
ro.data.large_tcp_window_size=true
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=false
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#ro.carrier=wifi-only
ro.telephony.default_network=0
# System property for storage_preload
persist.sys.storage_preload=1
# QCOM eMBMS SIB16
persist.radio.sib16_support=1
# AFW
ro.config.afw=DO
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.astcenc.astcsupport=0
ro.mct.compressiontype=ETC2
ro.config.tima=0
ro.config.timaversion=0
ro.telephony.default_network=9
ro.use_data_netmgrd=false
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
ro.config.ringtone=Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Morning_flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=single
ro.vendor.extension_library=libqti-perfd-client.so
persist.radio.apm_sim_not_pwdn=1
persist.radio.add_power_save=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.securestorage.support=false
media.enable-commonsource=true
ro.hdcp2.rx=tz
ro.secwvk=144
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.config.dha_cached_max=8
ro.config.dha_empty_init=36
ro.config.dha_empty_max=36
ro.config.dha_th_rate=1.83
ro.config.dha_lmk_scale=1.341
ro.config.ldha_ext_enable=true
ro.config.dha_defendth_enable=false
ro.sec.fle.encryption=true
ro.error.receiver.default=com.samsung.receiver.error
ro.security.vpnpp.release=5.3
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=5.1_r2
persist.sys.dalvik.vm.lib.2=libart.so
ro.build.selinux=1
dalvik.vm.isa.arm.features=div
ro.config.knox=v00
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.gps.qc_nlp_in_use=1
persist.loc.nlp_name=com.qualcomm.location
ro.gps.agps_provider=1
ro.pip.gated=0
ro.build.aapt.config.prefer=xhdpi
ro.build.version.sdl=2202
#Change for dual SIM users
#ro.multisim.simslotcount=1
ro.multisim.simslotcount=2
persist.radio.multisim.config=dsds
# Better Scrolling responsiveness and speed
windowsmgr.max_events_per_sec=150
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
# Better Flashlight intensity and camera-flash quality
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=65
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
# Battery save
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
ro.ril.power_collapse=1
power_supply.wakeup=enable
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
# More RAM
#persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
# Increase general Performance
debug.performance.tuning=1
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
ro.vold.umsdirtyratio=20
# More free ram and apps load faster
dalvik.vm.dexopt-flags=m=y
# Game tweaks
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Dialing & Call Tweaks
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.telephony.call_ring.delay=0
ring.delay=0
ro.ril.enable.amr.wideband=1
telephony.lteOnGsmDevice=1
ro.telephony.default_network=10
ro.ril.def.preferred.network=10
# Smoother video streaming and tweak media
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
ime_extend_row_keyboard=true
ime_onehand_keyboard=true
ime_split_keyboard=true
ime_vibration_pattern=0:60
# Better call voice quality.
ro.ril.enable.amr.wideband=1
# Device will boot faster
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Enable GPU Acceleration
debug.sf.hw=1
video.accelerate.hw=1
debug.performance.tuning=1
persist.sys.composition.type=gpu
debug.qc.hardware=true
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=gpu
hw3d.force=1
ro.product.gpu.driver=1
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
hwui.render_dirty_regions=false
hwui.disable_vsync=true
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Screen Mirroring
wlan.wfd.hdcp=disable
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#ANY FILE IN THIS ROM ITS EDITED BY LUCKY TEAM, DON'T TAKE THE FILES WITHOUT LUCKY TEAM PERMISSIONS

RAM: 1411 MB

System RAM: 132.000MB
System RAM: 7.000MB
System RAM: 4.000MB
System RAM: 1268.000MB


Flash: 16 GB (14.676 GB actual); 1.000 GB; 4 GB (3.693 GB actual)

mmcblk0: 14.676 GB
vnswap0: 1.000 GB
mmcblk1: 3.693 GB


Touch Screen for samsung SM-G903M

$52.94 Super AMOLED For SAMSUNG Galaxy S5 NEO LCD Touch Screen Digitizer Replacement For SAMSUNG S5 Neo Display SM-G903M G903F G903 LCD

$51.99 5.1" Super AMOLED For SAMSUNG Galaxy S5 NEO LCD Digitizer Display Touch Screen For Samsung S5 NEO G903 Display SM-G903M G903F

$45.68 100% Tested LCD For Samsung Galaxy S5 NEO SM-G903M G903 G903F G903M LCD Display Touch Screen Digitizer Assembly Super AMOLED

$51.61 Super AMOLED 5.1'' For Samsung Galaxy S5 NEO LCD Screen SM-G903M G903 G903F G903M LCD Display Touch Screen Digitizer Assembly

$48.62 5.1"Burn-Shadow For SAMSUNG Galaxy S5 NEO LCD Touch Screen Digitizer Replacements For SAMSUNG S5 NEO Display SM-G903M G903F LCD

$50.24 For Samsung Galaxy S5 Neo G903 LCD Display Touch Screen Digitizer Assembly For S5neo SM-G903M G903 G903F G903M With Tools

$52.88 For Samsung Galaxy S5 NEO SM-G903M G903 G903F G903M LCD Display Touch Screen Digitizer Assembly +Tools

$56.5 For Samsung Galaxy S5 NEO SM-G903M G903 G903F G903M Display Screen Digitizer Touch Panel Glass Sensor Assembly Replacement Part

Cover Cases for samsung SM-G903M

$4.69 Flip Case for Samsung Galaxy S5 Neo SM-G903F SM-G901F SM-G903M/DS Case Leather Cover for Samsung S 5 Neo SM G903 G903F G901F Bag

$4.97 Flip Case G903F for Samsung Galaxy S5 5S S 5 Neo SM-G903F G903M/DS Phone Case Leather Cover for Samsung S5 G900H SM-G900H Bag

$5.88 Phone Case On For SAMSUNG Galaxy S5 Neo SM-G903F Glitter Quicksands Diamond S5 Covers For SAMSUNG S5Neo Cases Shine Full Housing

$4.99 For SAMSUNG Galaxy S5Neo SM-G903F Brand Book Flip PU Leather Cases For SAMSUNG S5 Neo G903W SM-G903M/DS Cute Card Holder Covers

$4.24 Armor Case for Samsung Galaxy S5 5S Neo G903 G903F SM-G903F Bumper Fitted Case for Samsung S 5 Neo G903M SM-G903M Hard Cover

$4.97 Flip Case G903F for Samsung Galaxy S5 5S S 5 Neo SM-G903F G903M/DS Phone Case Leather Cover for Samsung S5 G900H SM-G900H Bag

$3.99 Luminous Cases For SAMSUNG Galaxy S5 S5Neo SM-G903F Duos SM-G903M/DS Soft TPU Silicon IMD Glossy Covers For Galaxy S5 Neo G903FD

$4.59 Case for Samsung Galaxy S5 S 5 Neo SM-G903F SM-G901F SM-G903M/DS SM G903F G901F G900M/ds Quicksand TPU Silicone Case Phone Cover

$4.13 Case For Samsung Galaxy S5 SM-G903W SM-G903M SM-G900MD Hard PC Shockproof Heavy Duty Protection Fashion Back Cover For Galaxy S5

$2.7 Luminous Cases For SAMSUNG Galaxy S5 S5Neo SM-G903F Duos SM-G903M/DS Soft TPU Silicon IMD Glossy Covers For Galaxy S5 Neo G903FD

$4.97 Flip for Samsung Galaxy S 5 s5 SM-G9303W G903M G900MD Case-Happening phone Cover Luxury business Selling intelligent wallet bag

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description:
Link: Here I buy Chinese smartphones and tablets



NEW: View Full Database >>>

Latest:

D1001D D1001
samsung SM-G355H
samsung SM-G930F
HUAWEI SLA-AL00
trur SMART 4G GEN C 5.0
samsung SM-G965U
ZH960
samsung SM-S727VL
samsung SM-G9750
android S119
Lenovo L38111
Android M30
LGE LG-Q710AL
alps A9000
ZTE Z899VL
alps X23
rockchip P-WAL-107-ELC-02
samsung SM-G900F
HUAWEI NEM-L51
unknown Woxter QX 80
samsung SM-N960F
HUAWEI SCC-U21
LEAGOO T8s
Asus Nexus 7
Jlinksz ZH960
alps P35 Pro
Android P30 Pro
alps M962
CUBE T8-PLUSMS
samsung SM-A510F
samsung SM-G930F
samsung SM-J260A
samsung SM-J500H
Jlinksz F1-F2-Y700-B5-B6-M20
Prestigio PSP3530DUO
samsung SM-T705C
asus ZenFone Max Pro M1
Lenovo L78011
Q-Innovations QS5509A
samsung SCH-I545
MBX HTV BOX HTV (II)
samsung GT-P5100
OnePlus ONEPLUS A5010
Jlinksz ZH960
samsung SM-G355HQ
alps M8
TCL 5010D
Allwinner QUAD-CORE T3 p1
asus P021
CAIXUNMODEL SmartTV