samsung SM-G9250 规格

一般信息
操作系统的详细信息
CPU信息
图形处理器细节
WiFi内核信息
build.prop
的内核模块
存储器映射

一般规格
生产厂家	samsung
型号	SM-G9250
Android版	5.0.2; G9250ZCU1AOF8; SDK21
中央处理单元	4 cores; UNIVERSAL5410 exynos5; Max: 1600,0 MHz; Min: 250,0 MHz
显示	1920 x 1080; DPI: 480; Evaluated Size: 4,6"
触摸屏	Multitouch 4 points
图形处理器	PowerVR SGX 544MP; Imagination Technologies; OpenGL ES-CM 1.1; OpenGL ES 2.0 build 1.10@2359475
内存RAM	2048 MB (2045 MB available)
快闪记忆体	16 GB Build-in (14.676 GB actual); 1.000 GB
沟通
电话	GSM; Net: HSDPA
WiFi	IEEE 802.11 b/g/n; Broadcom 4329/30; AP Mode
USB主机	Yes
蓝牙	Bluetooth® >= 2.1
全球定位系统	Yes
高级功能
前置摄像头	Photo: 12.8 MP; Max: 4128x3096; Video: 2.1 MP; Max: 1920x1080; Focus: auto macro continuous-picture continuous-video; Flash modes: off auto on torch
背照相机	Photo: 2.1 MP; Max size: 1920x1080; Video: 2.1 MP; Max: 1920x1080; Focus: infinity fixed; Flash modes: off
传感器	K330 Acceleration Sensor (STMicroelectronics); range: 0...19,613; resolution: 0,001 (0,003%); power: 0,25mA;
	AK8963C Magnetic field Sensor (Asahi Kasei Microdevices); range: 0...2000; resolution: 0,06 (0,003%); power: 6mA;
	K330 Gyroscope Sensor (STMicroelectronics); range: 0...8,727; resolution: 0 (0,004%); power: 6,1mA;
	BMP182 Barometer Sensor (BOSCH); range: 0...1000; resolution: 1 (0,1%); power: 1mA;
	MAX88005 Proximity Sensor (Maxim); range: 0...8; resolution: 5 (62,5%); power: 0,75mA;
	CM3323 Light Sensor (Capella Microsystems, Inc.); range: 0...60000; resolution: 1 (0,002%); power: 0,75mA;
	SHTC1 relative humidity sensor (Sensirion); range: 0...100; resolution: 0,04 (0,04%); power: 0,3mA;
	SHTC1 ambient temperature sensor (Sensirion); range: 0...165; resolution: 0,01 (0,006%); power: 0,3mA;
	Rotation Vector Sensor (AOSP); range: 0...1; resolution: 0 (0%); power: 12,35mA;
	Gravity Sensor (AOSP); range: 0...19,613; resolution: 0,001 (0,003%); power: 12,35mA;
	Linear Acceleration Sensor (AOSP); range: 0...19,613; resolution: 0,001 (0,003%); power: 12,35mA;
震动模式	Yes
支持的语言	174; Afrikaans; Aghem; Akan; Amharic; Arabic; Assamese; Asu; Azerbaijani; Basaa; Belarusian; Bemba; Bena; Bulgarian; Bambara; Bengali; Tibetan; Breton; Bodo; Bosnian; Catalan; Chiga; Cherokee; Czech; Welsh; Danish; Taita; German; Zarma; Duala; Jola-Fonyi; Dzongkha; Embu; Ewe; Greek; English; Esperanto; Spanish; Estonian; Basque; Ewondo; Persian; Fulah; Finnish; Filipino; Faroese; French; Irish; Galician; Swiss German; Gujarati; Gusii; Manx; Hausa; Hawaiian; Hebrew; Hindi; Croatian; Hungarian; Armenian; Indonesian; Igbo; Sichuan Yi; Icelandic; Italian; Japanese; Ngomba; Machame; Georgian; Kabyle; Kamba; Makonde; Kabuverdianu; Koyra Chiini; Kikuyu; Kazakh; Kako; Kalaallisut; Kalenjin; Khmer; Kannada; Korean; Konkani; Kashmiri; Shambala; Bafia; Cornish; Kyrgyz; Langi; Ganda; Lakota; Lingala; Lao; Lithuanian; Luba-Katanga; Luo; Luyia; Latvian; Masai; Meru; Morisyen; Malagasy; Makhuwa-Meetto; Meta'; Macedonian; Malayalam; Mongolian; Marathi; Malay; Maltese; Mundang; Burmese; Nama; Norwegian; North Ndebele; Nepali; Dutch; Kwasio; Norwegian; Ngiemboon; Nuer; Nyankole; Oromo; Oriya; Punjabi; Polish; Pashto; Portuguese; Romansh; Rundi; Romanian; Rombo; Russian; Kinyarwanda; Rwa; Samburu; Sangu; Sena; Koyraboro Senni; Sango; Tachelhit; Sinhala; Slovak; Slovenian; Shona; Somali; Albanian; Serbian; Swedish; Swahili; Congo Swahili; Tamil; Telugu; Teso; Tajik; Thai; Tigrinya; Turkmen; Tongan; Turkish; Tasawaq; Central Atlas Tamazight; Uyghur; Ukrainian; Urdu; Uzbek; Vai; Vietnamese; Vunjo; Soga; Yangben; Yoruba; Standard Moroccan Tamazight; Chinese; Zulu
电池	Technology: Li-ion; Voltage: 3551
FM radio	76MHz to 108MHz
SD Version:	1.1 7

KERNEL: Linux version 3.4.5-v1.3 (root@king.z) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sat Jun 27 23:50:56 CST 2015
CODENAME: REL
Mainboard: universal5410
BRAND: samsung
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: zerolte
DISPLAY: Aurora.Full-S6.Port.No.7.0
FINGERPRINT: samsung/zeroltexx/zerolte:5.0.2/LRX22G/G9250ZCU1AOF8:user/release-keys
HARDWARE: universal5410
ID: LRX22G
TAGS: release-keys

Processor : ARMv7 Processor rev 3 (v7l)
processor : 0
BogoMIPS : 1590.88
processor : 1
BogoMIPS : 1590.88
processor : 2
BogoMIPS : 1590.88
processor : 3
BogoMIPS : 1590.88
Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc0f
CPU revision : 3
Hardware : UNIVERSAL5410
Revision : 000a
Serial : aa8040d54d005d02

GL_EXT_debug_marker
GL_OES_rgb8_rgba8
GL_OES_depth24
GL_OES_vertex_half_float
GL_OES_texture_float
GL_OES_texture_half_float
GL_OES_element_index_uint
GL_OES_mapbuffer
GL_OES_fragment_precision_high
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_required_internalformat
GL_OES_depth_texture
GL_OES_get_program_binary
GL_OES_packed_depth_stencil
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_OES_egl_sync
GL_OES_texture_npot
GL_EXT_discard_framebuffer
GL_EXT_blend_minmax
GL_EXT_multi_draw_arrays
GL_EXT_multisampled_render_to_texture
GL_EXT_shader_texture_lod
GL_EXT_texture_format_BGRA8888
GL_EXT_occlusion_query_boolean
GL_EXT_texture_rg
GL_IMG_shader_binary
GL_IMG_texture_compression_pvrtc
GL_IMG_texture_compression_pvrtc2
GL_IMG_texture_npot
GL_IMG_texture_format_BGRA8888
GL_IMG_read_format
GL_IMG_program_binary
GL_IMG_uniform_buffer_object
GL_IMG_multisampled_render_to_texture

<6>[ 4185.800519] B0 19092 PVR_K: SGX change clock [266] Mhz -> [177] MHz req [177] MHz / M[800] / B[4]
<6>[ 4185.800574] B0 19092 PVR_K: SGX change voltage [900000] -> [900000] mV
<6>[ 4185.800746] B0 19092 PVR_K: SGX CCB RO : 141, WO : 141, Total : 33
<4>[ 4185.860631] B3 20967
<4>[ 4185.860662] B3 20967 Dongle Host Driver, version 1.141.64.13 (r)
<4>[ 4185.860717] B3 20967 Compiled in drivers/net/wireless/bcmdhd on Jun 27 2015 at 23:38:56
<4>[ 4185.860809] B3 20967 wl_android_wifi_on in
<4>[ 4185.860879] B3 20967 wifi_platform_set_power = 1
<4>[ 4185.860936] B3 20967 WiFi: trying to acquire BT lock
<4>[ 4185.861000] B3 20967 ####btlock acquired cookie: WiFi
<4>[ 4185.861052] B3 20967 wifi_platform_set_power: btlock acquired
<4>[ 4185.861115] B3 20967 check BCM4335, check_bcm4335_rev
<4>[ 4185.861216] B3 20967 /data/.rev file Found
<4>[ 4185.861278] B3 20967 Found BCM4335B0
<6>[ 4185.861332] B3 20967 ------------------------------------------------
<6>[ 4185.861401] B3 20967 ------------------------------------------------
<6>[ 4185.861477] B3 20967 brcm_wlan_power Enter: power on
<6>[ 4185.861547] B3 20967 gpio_table = [2]
<7>[ 4185.861807] B3 20967 WLAN: GPIO_WLAN_EN = 1
<6>[ 4185.865246] B0 19092 thermal_sys: [TMU] ACTIVE: Under active trip temp=74000
<4>[ 4186.065509] B3 20967 sdio_reset_comm():
<6>[ 4186.065729] B3 20967 mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
<4>[ 4186.082532] B1 20967 mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<4>[ 4186.085506] B1 20967 mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<4>[ 4186.087186] B1 20967 mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<6>[ 4186.148555] B2 20967 mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
<4>[ 4186.159110] B0 20967 F1 signature OK, socitype:0x1 chip:0x4335 rev:0x1 pkg:0x0
<4>[ 4186.160945] B0 20967 DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
<4>[ 4186.161651] B0 20967 CHIP VER = [0x1]
<4>[ 4186.161748] B0 20967 ----- CHIP bcm4335_B0 -----
<4>[ 4186.161822] B0 20967 dhdsdio_download_firmware: firmware path=/system/etc/wifi/bcmdhd_sta.bin, nvram path=/system/etc/wifi/nvram_net.txt_muratafem1
<6>[ 4186.165547] B0 19092 thermal_sys: [TMU] ACTIVE: Under active trip temp=75000
<4>[ 4186.279855] B0 20967 dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<6>[ 4186.300195] B0 19092 PVR_K: SGX change voltage [900000] -> [900000] mV
<6>[ 4186.300797] B0 19092 PVR_K: SGX change clock [177] Mhz -> [266] MHz req [266] MHz / M[800] / B[4]
<6>[ 4186.300845] B0 19092 PVR_K: SGX CCB RO : 198, WO : 198, Total : 57
<4>[ 4186.417583] B0 20967 dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
<6>[ 4186.417991] B0 20967 wake enabled for irq 528
<4>[ 4186.419857] B0 20967 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 4186.419929] B0 20967 [WIFI_SEC] dhd_check_module_cid: CIS reading failed, ret=-23
<4>[ 4186.431315] B1 20967 Firmware up: op_mode=0x0015, MAC=5c:b6:fa
<4>[ 4186.439558] B1 20967 dhdcdc_set_ioctl: SET PM to 2
<4>[ 4186.439977] B0 20967 [WIFI_SEC] sec_control_pm: /data/.psm.info open failed, so set PM to 2
<4>[ 4186.444586] B1 20967 dhd_wl_ioctl: WLC_SET_VAR: aibss_bcn_force_config, ret = -23
<4>[ 4186.444659] B1 20967 dhd_preinit_ioctls Set aibss_bcn_force_config to 500, 5000, 5000 failed -23
<4>[ 4186.459459] B2 20967 Firmware version = wl0: Mar 5 2015 16:46:55 version 6.30.171.24.64 (B0 Station/P2P)
<4>[ 4186.461309] B1 20967 [WIFI_SEC] .wifiver.info already saved.
<4>[ 4186.462336] B0 20967 dhd_wl_ioctl: WLC_SET_VAR: ampdu_hostreorder, ret = -23
<4>[ 4186.462389] B0 20967 dhd_preinit_ioctls wl ampdu_hostreorder failed -23
<4>[ 4186.462947] B1 20967 dhd_wl_ioctl: WLC_GET_VAR: pfnlbest, ret = -23
<4>[ 4186.464294] B1 20967 dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
<4>[ 4186.464352] B1 20967 [WIFI_SEC] dhd_check_module_mac: Check module mac by legacy FW : 5c:b6:fa
<6>[ 4186.465189] B0 19092 thermal_sys: [TMU] ACTIVE: Under active trip temp=75000
<4>[ 4186.466632] B1 20967 [WIFI_SEC] Check Mac address in .mac.info
<4>[ 4186.467042] B1 20967 ####btlock released, cookie: WiFi
<4>[ 4186.467078] B1 20967 wl_android_wifi_on() bcm_bt_unlock
<6>[ 4186.474275] B1 20967 CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=5e:b6:fa
<6>[ 4186.600537] B0 19092 PVR_K: SGX change clock [266] Mhz -> [177] MHz req [177] MHz / M[800] / B[4]
<6>[ 4186.600591] B0 19092 PVR_K: SGX change voltage [900000] -> [900000] mV
<6>[ 4186.600763] B0 19092 PVR_K: SGX CCB RO : 234, WO : 234, Total : 36
<6>[ 4186.765211] B0 19092 thermal_sys: [TMU] ACTIVE: Under active trip temp=75000
<6>[ 4186.826768] B0 20967 CFG80211-TRACE) __wl_cfg80211_scan : START SCAN
<4>[ 4186.835341] B1 20967 dhd_set_suspend: Remove extra suspend setting
<3>[ 4186.879238] B0 20967 WLDEV-ERROR) wldev_set_country : wldev_set_country: set country for RU as RU rev 13

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=LRX22G
ro.build.display.id=Aurora.Full-S6.Port.No.7.0
ro.build.version.incremental=G9250ZCU1AOF8
ro.build.version.sdk=21
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.2
ro.build.date=Wed Jul 1 20:32:11 KST 2015
ro.build.date.utc=1435750331
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDD6406
ro.build.tags=release-keys
ro.product.model=SM-G9250
ro.product.brand=samsung
ro.product.name=zeroltexx
ro.product.device=zerolte
ro.product.board=universal5410
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=exynos5
# ro.build.product is obsolete; use ro.product.device
ro.build.product=zerolte
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=zeroltexx-user 5.0.2 LRX22G G9250ZCU1AOF8 release-keys
ro.build.fingerprint=samsung/zeroltexx/zerolte:5.0.2/LRX22G/G9250ZCU1AOF8:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=G9250ZCU1AOF8
ro.build.hidden_ver=G9250ZCU1AOF8
ro.config.rm_preload_enabled=0
ro.build.changelist=5298107
ro.product_ship=true
ro.chipname=exynos5410
persist.sys.storage_preload=1
# end build properties
#
# from device/samsung/zerolte/system.prop
#
#
# system.prop for universal_5410
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=480
# Multimedia property for Smart View
media.enable-commonsource=true
# System property for storage_preload
persist.sys.storage_preload=1
ro.arch=exynos5410
ro.config.dha_ils_enable=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.notification_sound=Skyline.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.opengles.version=131072
ro.hwui.texture_cache_size=50
ro.hwui.layer_cache_size=34
ro.hwui.path_cache_size=10
ro.hwui.shape_cache_size=4
ro.hwui.gradient_cache_size=2
ro.hwui.drop_shadow_cache_size=6
ro.hwui.text_small_cache_width=2048
ro.hwui.text_small_cache_height=2048
ro.hwui.text_large_cache_width=4096
ro.hwui.text_large_cache_height=4096
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.sec.fle.encryption=true
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.shot=single
ro.build.scafe.cream=white
ro.error.receiver.default=com.samsung.receiver.error
ro.hdcp2.rx=tz
ro.secwvk=220
ro.securestorage.support=false
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=single
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=DISABLED
persist.sys.dalvik.vm.lib.2=libart.so
ro.build.selinux=1
dalvik.vm.isa.arm.features=div
ro.config.knox=0
ro.config.tima=0
ro.kernel.qemu=0
net.bt.name=Galaxy S6 Edge
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.build.version.sdl=2101
# Debug
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
ro.config.combined_signal=true
#Misc
wlan.wfd.hdcp=disable
ro.SecEDS.enable=false
persist.security.ams.enforcing=0
#battery
pm.sleep_mode=1
#Force launcher into memory
ro.HOME_APP_ADJ=1
debug.sf.hw=0
debug.egl.hw=0
dalvik.vm.dexopt-flags=m=y
# Scrolling speed tweak enabled
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.pressure.scale=0.1
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
# MultiTasking Tweaks
ro.config.dha_empty_max=36
ro.config.dha_cached_max=12
ro.config.dha_th_rate=2.3
ro.config.dha_lmk_scale=0.545
ro.config.sdha_apps_bg_max=70
ro.config.sdha_apps_bg_min=8
ro.config.oomminfree_high=7628,9768,11909,14515,16655,20469

RAM: 2048 MB (2045 MB available)

exynos5-fb.1: 7.910MB
: 1.625MB
System RAM: 2045.000MB

Flash: 16 GB Build-in (14.676 GB actual); 1.000 GB

mmcblk0: 14.676 GB
vnswap0: 1.000 GB

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description: