Xiaomi Mi Note 3
Especificaciones generales
MarcaXiaomi
ModeloMi Note 3
Versión de Android7.1.1; 7.11.19; SDK25
CPU8 cores; Qualcomm Technologies, Inc SDM660 sdm660; Max: 1843.2 MHz; Min: 633.6 MHz
Pantalla1920 x 1080; DPI: 440; Evaluated Size: 5.0"
Pantalla táctilMultitouch 10 points
GPUAdreno (TM) 512; Qualcomm; OpenGL ES-CM 1.1; OpenGL ES 3.2 V@207.0 (GIT@9d71901, I9d280822bd) (Date:06/28/17)
RAM0 MB
Flash128 GB (116.480 GB actual) (ver pestaña de mapa de memoria)
Comunicaciones
TeléfonoGSM; Net: LTE
WiFiwlan
USB HostNo
BluetoothYes
GPSYes
Funciones avanzadas
Cámara frontalPhoto: 12.2 MP; Max: 4032x3016; Video: 8.3 MP; Max: 3840x2160; Focus: infinity auto macro continuous-video continuous-picture; Flash modes: off auto on torch red-eye
Cámara traseraPhoto: 15.9 MP; Max size: 4608x3456; Video: 4.0 MP; Max: 2304x1728; Focus: fixed; No flash
SensoresICM20690 Accelerometer -Wakeup Secondary (InvenSense); range: 0...78.453; resolution: 0.002 (0.003%); power: 0.325mA;
AK09916C Magnetometer -Wakeup Secondary (AKM); range: 0...4912; resolution: 0.15 (0.003%); power: 1.1mA;
ICM20690 Gyroscope -Wakeup Secondary (InvenSense); range: 0...34.907; resolution: 0.001 (0.003%); power: 2.5mA;
TMD2620 PROX -Non Wakeup Secondary (ams AG); range: 0...5; resolution: 1 (19.999%); power: 0.1mA;
BMP285 Pressure -Wakeup Secondary (BOSCH); range: 0...1100; resolution: 0.002 (0%); power: 0.025mA;
Gravity -Wakeup Secondary (QTI); range: 0...78.453; resolution: 0.002 (0.003%); power: 2.825mA;
Linear Acceleration -Wakeup Secondary (QTI); range: 0...78.453; resolution: 0.002 (0.003%); power: 2.825mA;
Rotation Vector -Wakeup Secondary (QTI); range: 0...1; resolution: 0 (0%); power: 3.6mA;
BH1745 BH1745 ALS DEVICE (ROHM); range: 0...0; resolution: 0.1 (Infinity%); power: 0.13mA;
Alarma vibranteYes
Idiomas soportados665; Chinese; Nuer; Hindi; Somali; Romanian; Indonesian; Shona; Swahili; Spanish; Jola-Fonyi; Russian; English; Zulu; English; Portuguese; English; Arabic; Bafia; English; Spanish; English; Ewondo; Spanish; English; Spanish; Rombo; French; English; Tamil; English; Makhuwa-Meetto; French; Western Frisian; Metaʼ; Tongan; French; English; Quechua; English; Machame; Kinyarwanda; Manx; Cherokee; Swedish; Punjabi; Chiga; Portuguese; French; Swedish; Zarma; Colognian; English; Arabic; Sinhala; Luyia; Spanish; Arabic; Turkish; Duala; French; Norwegian; Serbian; French; Luo; Fulah; Spanish; Oromo; English; Czech; Zulu; Bosnian; Slovenian; Uzbek; Spanish; Azerbaijani; English; French; Shambala; Vunjo; French; Chinese; Taita; Kwasio; Faroese; English; Greek; Nuer; Maltese; Chinese; English; Tamil; Portuguese; Hausa; Masai; Catalan; Russian; Koyraboro Senni; Spanish; Arabic; Italian; English; Yiddish; Croatian; Georgian; Portuguese; Dutch; English; Russian; Punjabi; Makhuwa-Meetto; Spanish; Inari Sami; Khmer; Ewe; Catalan; Tasawaq; Arabic; Esperanto; Nepali; Punjabi; Assamese; Spanish; Vietnamese; German; Igbo; Oriya; English; Mundang; Polish; Latvian; French; Luxembourgish; Croatian; Central Atlas Tamazight; Hawaiian; Swahili; Tachelhit; Mongolian; Swiss German; Oromo; French; Spanish; Tachelhit; Spanish; Lao; Spanish; Kalaallisut; Ngiemboon; Tibetan; Teso; Estonian; English; French; Serbian; Breton; Yoruba; Turkish; Serbian; Bemba; French; Tigrinya; Hungarian; Macedonian; German; Somali; Norwegian; Luo; English; Slovak; Hawaiian; Colognian; Slovak; Nyankole; Persian; Standard Moroccan Tamazight; French; English; Uzbek; Romansh; Walser; Konkani; English; Shona; Tongan; Telugu; Albanian; Langi; Hausa; Tamil; English; Azerbaijani; English; Danish; English; Malay; Pashto; Lithuanian; Teso; Breton; Italian; French; English; Bambara; Kazakh; Quechua; Turkish; Duala; Bosnian; Dutch; Lingala; Swahili; Luyia; English; Asu; Faroese; English; Tachelhit; Asu; Langi; French; Dzongkha; Arabic; Serbian; Dzongkha; Catalan; Tachelhit; Spanish; Rundi; Albanian; Masai; English; Embu; Greek; Yoruba; Vietnamese; Burmese; German; English; Macedonian; Akan; French; English; Burmese; French; Welsh; Spanish; Vai; Yiddish; English; Bafia; English; Western Frisian; Chechen; Serbian; Fulah; Afrikaans; Persian; Bengali; Vunjo; Kashmiri; Bulgarian; Sakha; Albanian; Standard Moroccan Tamazight; French; Tasawaq; Kinyarwanda; Afrikaans; Chinese; Bemba; Lower Sorbian; Basaa; Quechua; English; Arabic; North Ndebele; English; Uzbek; English; Romanian; Ukrainian; Arabic; Northern Sami; Lingala; Bodo; Portuguese; Amharic; Kalaallisut; Portuguese; Tamil; Thai; Northern Sami; Fulah; Kyrgyz; English; Urdu; Afrikaans; Swiss German; English; Somali; Sakha; French; Arabic; Vai; Gujarati; English; Spanish; Malay; French; Thai; French; Russian; Dutch; Latvian; Kikuyu; French; English; Japanese; Makonde; Amharic; Dutch; Tibetan; Irish; Slovenian; Bengali; Meru; Serbian; Rwa; English; French; Taita; Tigrinya; Danish; Chinese; Cornish; Irish; Morisyen; Italian; Faroese; English; Czech; Cherokee; Khmer; English; Marathi; Greek; English; Malagasy; Russian; Kwasio; Zarma; English; Friulian; English; Georgian; Bambara; German; Telugu; Malayalam; Armenian; Swahili; Cornish; Kannada; Russian; Lingala; Estonian; French; English; Bengali; Sangu; Pashto; Quechua; Lithuanian; Sichuan Yi; English; Basque; English; Shambala; Portuguese; Rombo; Galician; English; Ewe; Bosnian; Arabic; Walser; Kamba; Dutch; Soga; Icelandic; French; Samburu; Hebrew; Oromo; English; Azerbaijani; Norwegian; Chiga; Serbian; Portuguese; Metaʼ; English; French; Arabic; Scottish Gaelic; Uzbek; Konkani; German; Kalenjin; Kamba; Maltese; Belarusian; Chechen; Ngomba; English; French; Spanish; Swedish; Aghem; Albanian; Croatian; Vai; Central Atlas Tamazight; Meru; German; Ossetic; Filipino; Samburu; Spanish; Northern Luri; English; Malagasy; Arabic; Yangben; Kashmiri; Romanian; Luba-Katanga; English; Ngomba; Icelandic; Spanish; Fulah; English; Azerbaijani; Bosnian; English; French; Uyghur; Indonesian; English; Dutch; Sena; Russian; Nama; Scottish Gaelic; English; Malayalam; Japanese; Azerbaijani; Swahili; Punjabi; Ukrainian; Tamil; Chinese; Polish; Spanish; Danish; Belarusian; Persian; Portuguese; French; Bosnian; Vai; Masai; Arabic; English; Spanish; Ganda; Hungarian; French; English; Bodo; Mundang; Uzbek; French; Lower Sorbian; Arabic; Catalan; English; Uyghur; Hausa; English; Swedish; Assamese; Igbo; Serbian; English; Sangu; Tibetan; Nepali; Bulgarian; Machame; Serbian; English; Arabic; English; Arabic; French; Lakota; Kannada; Hausa; English; Filipino; French; Sango; Upper Sorbian; Catalan; Teso; French; Upper Sorbian; Northern Luri; English; Lakota; Kazakh; Gusii; French; Marathi; Spanish; English; Korean; Arabic; French; English; Spanish; Swiss German; Friulian; Uzbek; Urdu; Rwa; Spanish; Malay; Welsh; English; Sena; Arabic; English; Basque; Kikuyu; French; Inari Sami; Koyraboro Senni; Somali; Kabyle; Spanish; English; Lao; Kalenjin; English; Swiss German; English; Northern Sami; English; Nyankole; Koyra Chiini; English; Ewe; Nama; Korean; Kabuverdianu; Luxembourgish; English; Norwegian; Arabic; Northern Luri; Arabic; Vai; Punjabi; French; English; Sinhala; Chinese; Manx; Kyrgyz; Bena; Dutch; Jola-Fonyi; Soga; Romansh; Makonde; Arabic; Tigrinya; Gusii; Hebrew; Aghem; Armenian; Northern Sami; Portuguese; English; Oriya; Chinese; Tachelhit; Bena; Fulah; English; French; English; North Ndebele; Finnish; English; German; Mazanderani; French; Basaa; Akan; Dutch; Arabic; Serbian; Koyra Chiini; Kabyle; Arabic; Serbian; Chinese; Urdu; Spanish; Arabic; Morisyen; Kako; Finnish; Luba-Katanga; French; Embu; Ossetic; Nepali; Lingala; Gujarati; Chinese; Ossetic; Sango; Mongolian; Galician; Ganda; Korean; Rundi; Mazanderani; Spanish; Hindi; Arabic; Malay; French; Uzbek; Somali; Sichuan Yi; English; Arabic; Kabuverdianu; Lingala; Yangben; French; Norwegian; Yoruba; Ngiemboon; English; Kako; Ewondo; English
BateríaTechnology: Li-poly; Voltage: 3859
SD Version:1.1 7

KERNEL: Linux version 4.4.21-perf-g91f9a92-00602-g6e0c0ad (builder@c3-miui-ota-bd66.bj) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Nov 16 01:00:28 CST 2017
CODENAME: REL
Mainboard: sdm660
BRAND: Xiaomi
CPU_ABI: arm64-v8a
CPU_ABI2:
DEVICE: jason
DISPLAY: NMF26X
FINGERPRINT: Xiaomi/jason/jason:7.1.1/NMF26X/7.11.16:user/release-keys
HARDWARE: qcom
ID: NMF26X
TAGS: release-keys

Processor : AArch64 Processor rev 4 (aarch64)
processor : 0
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0xa
CPU part : 0x801
CPU revision : 4
processor : 1
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0xa
CPU part : 0x801
CPU revision : 4
processor : 2
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0xa
CPU part : 0x801
CPU revision : 4
processor : 3
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0xa
CPU part : 0x801
CPU revision : 4
processor : 4
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0xa
CPU part : 0x800
CPU revision : 2
processor : 5
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0xa
CPU part : 0x800
CPU revision : 2
processor : 6
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0xa
CPU part : 0x800
CPU revision : 2
processor : 7
BogoMIPS : 38.40
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0xa
CPU part : 0x800
CPU revision : 2
Hardware : Qualcomm Technologies, Inc SDM660

GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_vertex_half_float
GL_OES_framebuffer_object
GL_OES_rgb8_rgba8
GL_OES_compressed_ETC1_RGB8_texture
GL_AMD_compressed_ATC_texture
GL_KHR_texture_compression_astc_ldr
GL_KHR_texture_compression_astc_hdr
GL_OES_texture_compression_astc
GL_OES_texture_npot
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_format_BGRA8888
GL_OES_texture_3D
GL_EXT_color_buffer_float
GL_EXT_color_buffer_half_float
GL_QCOM_alpha_test
GL_OES_depth24
GL_OES_packed_depth_stencil
GL_OES_depth_texture
GL_OES_depth_texture_cube_map
GL_EXT_sRGB
GL_OES_texture_float
GL_OES_texture_float_linear
GL_OES_texture_half_float
GL_OES_texture_half_float_linear
GL_EXT_texture_type_2_10_10_10_REV
GL_EXT_texture_sRGB_decode
GL_OES_element_index_uint
GL_EXT_copy_image
GL_EXT_geometry_shader
GL_EXT_tessellation_shader
GL_OES_texture_stencil8
GL_EXT_shader_io_blocks
GL_OES_shader_image_atomic
GL_OES_sample_variables
GL_EXT_texture_border_clamp
GL_EXT_multisampled_render_to_texture
GL_OES_shader_multisample_interpolation
GL_EXT_texture_cube_map_array
GL_EXT_draw_buffers_indexed
GL_EXT_gpu_shader5
GL_EXT_robustness
GL_EXT_texture_buffer
GL_EXT_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_OES_texture_storage_multisample_2d_array
GL_OES_sample_shading
GL_OES_get_program_binary
GL_EXT_debug_label
GL_KHR_blend_equation_advanced
GL_KHR_blend_equation_advanced_coherent
GL_QCOM_tiled_rendering
GL_ANDROID_extension_pack_es31a
GL_EXT_primitive_bounding_box
GL_OES_standard_derivatives
GL_OES_vertex_array_object
GL_EXT_disjoint_timer_query
GL_KHR_debug
GL_EXT_YUV_target
GL_EXT_sRGB_write_control
GL_EXT_texture_norm16
GL_EXT_discard_framebuffer
GL_OES_surfaceless_context
GL_OVR_multiview
GL_OVR_multiview2
GL_EXT_texture_sRGB_R8
GL_ARB_texture_barrier
GL_KHR_no_error
GL_EXT_debug_marker
GL_OES_EGL_image_external_essl3
GL_OVR_multiview_multisampled_render_to_texture
GL_EXT_buffer_storage
GL_EXT_blit_framebuffer_params
GL_EXT_clip_cull_distance
GL_EXT_protected_textures
GL_EXT_shader_non_constant_global_initializers

[ 2300.085981] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2300.147408] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2300.803774] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2300.907372] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2301.461901] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2301.488061] ipa ipa_isr:233 Entered to interrupt service routine
[ 2301.488108] ipa ipa_isr:242 defer interrupt processing
[ 2301.488461] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2301.493475] ipa handle_interrupt:110 interrupt num 16, Suspend data 0x20
[ 2301.888720] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2302.474897] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2302.586914] wlan: Loading driver v5.1.0.62V
[ 2302.586926] wlan: Loading driver v5.1.0.62V
[ 2302.588258] wlan_hdd_state wlan major(223) initialized
[ 2302.590978] wlan: probing driver v5.1.0.62V
[ 2302.599615] R0: wlan: [16925:E :HDD] hdd_apply_cfg_ini: 4826: Reg Parameter gtsf_gpio_pin > allowed Maximum [255 > 254]. Enforcing Default= 255
[ 2302.601166] R0: wlan: [16925:E :HDD] hdd_apply_cfg_ini: 4833: Reg Parameter 5g_rssi_boost_threshold < allowed Minimum [4294967236 < 18446744073709551561]. Enforcing Default= 18446744073709551556
[ 2302.601213] R0: wlan: [16925:E :HDD] hdd_apply_cfg_ini: 4833: Reg Parameter 5g_rssi_penalize_threshold < allowed Minimum [4294967226 < 18446744073709551551]. Enforcing Default= 18446744073709551546
[ 2302.601333] ipa ipa2_uc_reg_rdyCB:1734 bad parm. inout= (null)
[ 2302.604217] send_filled_buffers_to_user: Send Failed -22 drop_count = 1
[ 2302.607931] R0: [kworker/u16:17][48205553870] [14:25:34.690973] wlan: [16925:E :HDD] hdd_cfg_print: 5935: Name = [g_auto_detect_power_failure_mode] Value = [0]
[ 2302.608340] R0: [kworker/u16:17][48205561748] [14:25:34.691383] wlan: [16925:E :HIF] wlan: disable pcie power collapse ignored
[ 2302.665201] IPC_RTR: process_new_server_msg: Server 00001003 create rejected, version = 0
[ 2302.673541] R0: [kworker/u16:17][48206813670] [14:25:34.756587] wlan: [16925:E :QDF] cds_get_context: Module ID 21 context is Null
[ 2302.676603] R0: [kworker/u16:17][48206872434] [14:25:34.759648] wlan: [16925:E :QDF] cds_get_context: Module ID 21 context is Null
[ 2302.676876] R0: [kworker/u16:17][48206877751] [14:25:34.759925] wlan: [16925:E :QDF] ol_if_dfs_attach: called; ptr=ffffffaa2649b4a4, radar_info=fffffffb052af8d8
[ 2302.676876]
[ 2302.677203] R0: [kworker/u16:17][48206884037] [14:25:34.760252] wlan: [16925:E :SAP] dfs_init_radar_filters[239]: Unknown dfs domain 0
[ 2302.677325] R0: [kworker/u16:17][48206886393] [14:25:34.760375] wlan: [16925:E :QDF] +HWT
[ 2302.677325]
[ 2302.684600] R0: [kworker/u16:17][48207025876] [14:25:34.767640] wlan: [16925:E :QDF] Target Ready! : transmit resources : 2 size:2184, MaxMsgsPerHTCBundle = 1
[ 2302.684600]
[ 2302.684620] R0: [kworker/u16:17][48207026460] [14:25:34.767670] wlan: [16925:E :QDF] HTC Service Index : 1 TX : 0x100 : alloc:2
[ 2302.684620]
[ 2302.684638] R0: [kworker/u16:17][48207026800] [14:25:34.767688] wlan: [16925:E :QDF] HTC Service:0x0001, ULpipe:0 DLpipe:2 id:0 Ready
[ 2302.684638]
[ 2302.684649] R0: [kworker/u16:17][48207027006] [14:25:34.767698] wlan: [16925:E :QDF] -HWT
[ 2302.684649]
[ 2302.684684] R0: [kworker/u16:17][48207027679] [14:25:34.767733] wlan: [16925:E :PE ] cfg_init: 142: Size of cfg I buffer:181 S buffer: 1271
[ 2302.684695] R0: [kworker/u16:17][48207027896] [14:25:34.767745] wlan: [16925:E :PE ] cfg_init: 145: Allocation for cfg buffers: 3443 bytes
[ 2302.685029] R0: [kworker/u16:17][48207034298] [14:25:34.768078] wlan: [16925:E :QDF] is_full_reorder_offloaded? 1
[ 2302.685029]
[ 2302.685041] R0: [kworker/u16:17][48207034541] [14:25:34.768091] wlan: [16925:E :QDF] ce_classify_enabled 1
[ 2302.685041]
[ 2302.685056] R0: [kworker/u16:17][48207034823] [14:25:34.768105] wlan: [16925:E :QDF] HTC Service TX : 0x300 : allocation is zero!
[ 2302.685056]
[ 2302.685232] R0: [kworker/u16:17][48207038167] [14:25:34.768280] wlan: [16925:E :QDF] HTC Service:0x0300, ULpipe:4 DLpipe:1 id:1 Ready
[ 2302.685232]
[ 2302.685245] R0: [kworker/u16:17][48207038437] [14:25:34.768294] wlan: [16925:E :QDF] HTC Service:0x0300 ep:1 TX flow control disabled
[ 2302.685245]
[ 2302.685257] R0: [kworker/u16:17][48207038689] [14:25:34.768307] wlan: [16925:E :QDF] HTC Service TX : 0x301 : allocation is zero!
[ 2302.685257]
[ 2302.685357] R0: [kworker/u16:17][48207040596] [14:25:34.768406] wlan: [16925:E :QDF] HTC Service:0x0301, ULpipe:0 DLpipe:9 id:2 Ready
[ 2302.685357]
[ 2302.685369] R0: [kworker/u16:17][48207040837] [14:25:34.768419] wlan: [16925:E :QDF] HTC Service:0x0301 ep:2 TX flow control disabled
[ 2302.685369]
[ 2302.685425] R0: [kworker/u16:17][48207041186] [14:25:34.768437] wlan: [16925:E :QDF] HTC Service TX : 0x302 : allocation is zero!
[ 2302.685425]
[ 2302.685550] R0: [kworker/u16:17][48207044295] [14:25:34.768599] wlan: [16925:E :QDF] HTC Service:0x0302, ULpipe:0 DLpipe:10 id:3 Ready
[ 2302.685550]
[ 2302.685562] R0: [kworker/u16:17][48207044543] [14:25:34.768612] wlan: [16925:E :QDF] HTC Service:0x0302 ep:3 TX flow control disabled
[ 2302.685562]
[ 2302.685592] R0: [kworker/u16:17][48207045100] [14:25:34.768641] wlan: [16925:E :HIF] Registering LRO for ce_id 1 NAPI callback for 2 flush_cb ffffffaa26227428, lro_data fffffffbd0ec1000
[ 2302.685592]
[ 2302.685607] R0: [kworker/u16:17][48207045396] [14:25:34.768656] wlan: [16925:E :HIF] Registering LRO for ce_id 9 NAPI callback for 10 flush_cb ffffffaa26227428, lro_data fffffffbd0ec0800
[ 2302.685607]
[ 2302.685623] R0: [kworker/u16:17][48207045696] [14:25:34.768672] wlan: [16925:E :HIF] Registering LRO for ce_id 10 NAPI callback for 11 flush_cb ffffffaa26227428, lro_data fffffffbd0ec4000
[ 2302.685623]
[ 2302.685689] R0: [kworker/u16:17][48207046975] [14:25:34.768738] wlan: [16925:E :QDF] HTC Service TX : 0x600 : allocation is zero!
[ 2302.685689]
[ 2302.685844] R0: [kworker/u16:17][48207049165] [14:25:34.768852] wlan: [16925:E :QDF] HTC Service:0x0600, ULpipe:0 DLpipe:11 id:4 Ready
[ 2302.685844]
[ 2302.685862] R0: [kworker/u16:17][48207050290] [14:25:34.768911] wlan: [16925:E :QDF] HTC Service:0x0600 ep:4 TX flow control disabled
[ 2302.685862]
[ 2302.685956] R0: [kworker/u16:17][48207052084] [14:25:34.769005] wlan: [16925:E :QDF] HTC Service:0x0100, ULpipe:3 DLpipe:2 id:5 Ready
[ 2302.685956]
[ 2302.686088] R0: [kworker/u16:17][48207054630] [14:25:34.769137] wlan: [16925:E :QDF] HTC using TX credit flow control
[ 2302.686088]
[ 2302.688877] R0: [cds_mc_thread][48207108108] [14:25:34.771922] wlan: [18922:E :WMA] wma_rx_service_ready_event: Firmware build version : 1013804a
[ 2302.688903] R0: [cds_mc_thread][48207108680] [14:25:34.771952] wlan: [18922:E :WMA] wma_rx_service_ready_event: Board version is unknown!
[ 2302.688983] R0: [cds_mc_thread][48207110210] [14:25:34.772032] wlan: [18922:E :QDF] TXRX: Global pool size: 3600
[ 2302.688983]
[ 2302.689005] R0: [cds_mc_thread][48207110639] [14:25:34.772054] wlan: [18922:E :WMA] Firmware supports management TX over WMI,use WMI interface instead of HTT for management Tx
[ 2302.689017] R0: [cds_mc_thread][48207110878] [14:25:34.772067] wlan: [18922:E :WMA] wmi_desc_pool_init: initialize desc pool of size 50
[ 2302.689069] R0: [cds_mc_thread][48207111866] [14:25:34.772118] wlan: [18922:F :WMA] wma_rx_service_ready_event: WMA waiting for WMI_SERVICE_READY_EXT_EVENTID
[ 2302.689758] R0: [cds_mc_thread][48207125103] [14:25:34.772808] wlan: [18922:F :WMA] wma_update_hw_mode_list: Updated HW mode list: Num modes:2
[ 2302.753633] R0: [kworker/u16:17][48208351320] [14:25:34.836674] wlan: [16925:E :QDF] HTT: full reorder offload enabled
[ 2302.753633]
[ 2302.801095] R0: [kworker/u16:17][48209262600] [14:25:34.884136] wlan: [16925:E :TRX] page_divider 0x5, offset_filter 0x1f num elem 3600, ol desc num page 113, ol desc per page 32
[ 2302.805310] Host SW:5.1.0.62V, FW:1.0.1.74.1, HW:HW_VERSION=40050000.
[ 2302.807292] cfg80211: Regulatory domain changed to country: CN
[ 2302.807304] cfg80211: DFS Master region: FCC
[ 2302.807308] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2302.807314] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2302.807320] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 2302.807325] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 2302.807329] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 2302.807334] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 2302.814972] R0: [kworker/u16:17][48209529053] [14:25:34.898014] wlan: [16925:E :HDD] hdd_ipa_uc_register_uc_ready:726: UC Ready
[ 2302.816717] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2302.830954] ipa ipa_isr:233 Entered to interrupt service routine
[ 2302.830979] ipa ipa_isr:242 defer interrupt processing
[ 2302.831183] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2302.833447] R0: [kworker/u16:17][48209883869] [14:25:34.916493] wlan: [16925:E :HDD] wlan_hdd_gen_wlan_status_pack: 78: invalid session id: 255
[ 2302.833463] R0: [kworker/u16:17][48209884254] [14:25:34.916513] wlan: [16925:E :HDD] wlan_hdd_gen_wlan_status_pack: 78: invalid session id: 255
[ 2302.833607] ipa handle_interrupt:110 interrupt num 16, Suspend data 0x20
[ 2302.833975] R0: [cds_mc_thread][48209894049] [14:25:34.917023] wlan: [18922:E :WMA] Invalid wma_cli_set pdev command/Not yet implemented 0x94
[ 2302.834012] R0: [cds_mc_thread][48209894798] [14:25:34.917062] wlan: [18922:E :WMA] Invalid wma_cli_set pdev command/Not yet implemented 0x96
[ 2302.834903] wlan: driver loaded
[ 2302.841943] R0: [ifconfig][48210046990] [14:25:34.924989] wlan: [18944:E :HDD] hdd_update_config_cfg: 6811: Couldn`t pass on WNI_CFG_MCAST_BCAST_FILTER_SETTING to CFG
[ 2302.841985] R0: [ifconfig][48210047893] [14:25:34.925036] wlan: [18944:E :SME] sme_add_ch_avoid_callback: Plug in CH AVOID CB
[ 2302.842000] R0: [cds_mc_thread][48210048156] [14:25:34.925050] wlan: [18922:E :WMA] Invalid wma_cli_set pdev command/Not yet implemented 0x4d
[ 2302.842040] R0: [cds_mc_thread][48210048926] [14:25:34.925090] wlan: [18922:E :WMA] Invalid wma_cli_set pdev command/Not yet implemented 0x23
[ 2302.847973] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 0,timeout_jiffies = 1000
[ 2302.848240] ipa ipa_isr:233 Entered to interrupt service routine
[ 2302.848255] ipa ipa_process_interrupts:191 Received the UC interrupt
[ 2302.848262] ipa ipa_process_interrupts:194 Cleared the UC interrupt
[ 2302.848323] ipa ipa_uc_response_hdlr:429 UC response handler = 3
[ 2302.848341] ipa ipa_uc_response_hdlr:485 uc_status = 96
[ 2302.848929] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 0,timeout_jiffies = 1000
[ 2302.849014] ipa ipa_isr:233 Entered to interrupt service routine
[ 2302.849024] ipa ipa_process_interrupts:191 Received the UC interrupt
[ 2302.849031] ipa ipa_process_interrupts:194 Cleared the UC interrupt
[ 2302.849173] ipa ipa_uc_response_hdlr:429 UC response handler = 3
[ 2302.849190] ipa ipa_uc_response_hdlr:485 uc_status = 96
[ 2302.851145] R0: [ifconfig][48210223198] [14:25:34.934167] wlan: [18944:E :WMA] MCC TX Pause Event Handler register
[ 2302.851427] R0: [cds_mc_thread][48210229137] [14:25:34.934476] wlan: [18922:E :WMA] Unhandled WMA message of type 4165
[ 2302.851555] R0: [ifconfig][48210231611] [14:25:34.934605] wlan: [18944:E :QDF] Receive flow steering configuration, disable gEnableFlowSteering(=0) in ini if FW doesnot support it
[ 2302.851555]
[ 2302.851577] R0: [ifconfig][48210231846] [14:25:34.934617] wlan: [18944:E :QDF] Enable Rx flow steering
[ 2302.851577]
[ 2302.851592] R0: [ifconfig][48210232333] [14:25:34.934642] wlan: [18944:E :QDF] Pkt log is enabled
[ 2302.851592]
[ 2302.851812] R0: [soft_irq][48210236540] [14:25:34.934862] wlan: [0:E :QDF] target uses HTT version 3.46; host uses 3.31
[ 2302.851840] R0: [soft_irq][48210237101] [14:25:34.934891] wlan: [0:E :QDF] *** Warning: host/target HTT versions are
[ 2302.851863] R0: [soft_irq][48210237375] [14:25:34.934905] wlan: [0:E :QDF] different, though compatible!
[ 2302.851884] R0: [cds_mc_thread][48210237934] [14:25:34.934934] wlan: [18922:E :WMA] Unhandled WMA message of type 4197
[ 2302.856428] R0: [cds_mc_thread][48210325115] [14:25:34.939475] wlan: [18922:E :WMA] Invalid wma_cli_set pdev command/Not yet implemented 0x34
[ 2302.856485] R0: [cds_mc_thread][48210326292] [14:25:34.939536] wlan: [18922:E :WMA] SET GEN_VDEV_PARAM_AMSDU command is currently not supported
[ 2302.857285] R0: [ifconfig][48210341607] [14:25:34.940334] wlan: [18944:E :SME] Sta not infra/connected state 0
[ 2302.857296] R0: [ifconfig][48210341844] [14:25:34.940346] wlan: [18944:E :SME] sme_ps_enable_auto_ps_timer: 1005: Start auto_ps_timer for 5000 ms
[ 2302.857354] R0: [soft_irq][48210342977] [14:25:34.940405] wlan: [0:E :SME] sme_8023_multicast_list: Invalid session: 0
[ 2302.857451] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2302.861583] R0: [soft_irq][48210424085] [14:25:34.944629] wlan: [0:E :SME] sme_8023_multicast_list: Invalid session: 0
[ 2302.862207] R0: [cds_mc_thread][48210436134] [14:25:34.945257] wlan: [18922:E :WMA] vdev_id:0 vdev_hdl:fffffffb0bd1d000
[ 2302.868851] R0: [cds_mc_thread][48210563612] [14:25:34.951897] wlan: [18922:E :WMA] wma_vdev_delete_handler Vdev delete resp vdev id 0
[ 2302.868881] R0: [cds_mc_thread][48210564276] [14:25:34.951931] wlan: [18922:E :WMA] wma_vdev_detach_callback: sending eWNI_SME_DEL_STA_SELF_RSP for vdev 0
[ 2303.000801] R0: [soft_irq][48213096878] [14:25:35.083838] wlan: [0:E :SME] sme_8023_multicast_list: Invalid session: 0
[ 2303.000979] R0: [cds_mc_thread][48213100412] [14:25:35.084022] wlan: [18922:E :WMA] Invalid wma_cli_set pdev command/Not yet implemented 0x34
[ 2303.001239] R0: [cds_mc_thread][48213105407] [14:25:35.084282] wlan: [18922:E :WMA] SET GEN_VDEV_PARAM_AMSDU command is currently not supported
[ 2303.001461] R0: [WifiStateMachin][48213109661] [14:25:35.084503] wlan: [2182:E :SME] sme_ps_disable_auto_ps_timer: 1037: Stop auto_ps_enable_timer Timer for session ID:0
[ 2303.001490] R0: [WifiStateMachin][48213110232] [14:25:35.084533] wlan: [2182:E :SME] Sta not infra/connected state 0
[ 2303.001515] R0: [WifiStateMachin][48213110720] [14:25:35.084559] wlan: [2182:E :SME] sme_ps_enable_auto_ps_timer: 1005: Start auto_ps_timer for 5000 ms
[ 2303.022547] init: Starting service `p2p_supplicant`...
[ 2303.028752] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2303.060101] ipa ipa_isr:233 Entered to interrupt service routine
[ 2303.060125] ipa ipa_isr:242 defer interrupt processing
[ 2303.060483] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2303.062362] ipa handle_interrupt:110 interrupt num 16, Suspend data 0x20
[ 2303.107805] R0: [cds_mc_thread][48215151309] [14:25:35.190839] wlan: [18922:E :WMA] Invalid wma_cli_set pdev command/Not yet implemented 0x34
[ 2303.107891] R0: [cds_mc_thread][48215153259] [14:25:35.190941] wlan: [18922:E :WMA] SET GEN_VDEV_PARAM_AMSDU command is currently not supported
[ 2303.109733] R0: [wpa_supplicant][48215188532] [14:25:35.192778] wlan: [18949:E :SME] Sta not infra/connected state 1
[ 2303.109832] R0: [soft_irq][48215190512] [14:25:35.192881] wlan: [0:E :SME] sme_8023_multicast_list: Invalid session: 1
[ 2303.109934] IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready
[ 2303.258667] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2303.287840] ipa ipa_isr:233 Entered to interrupt service routine
[ 2303.287863] ipa ipa_isr:242 defer interrupt processing
[ 2303.288069] ipa ipa_uc_send_cmd:596 Received the uc send cmd polling_mode = 1,timeout_jiffies = 0
[ 2303.289989] ipa handle_interrupt:110 interrupt num 16, Suspend data 0x20

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=NMF26X
ro.build.display.id=NMF26X
ro.build.version.incremental=7.11.19
ro.build.version.sdk=25
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=7.1.1
ro.build.version.security_patch=2017-10-01
ro.build.version.base_os=
ro.build.date=Thu Nov 16 00:51:47 CST 2017
ro.build.date.utc=1510764707
ro.build.type=user
ro.build.user=builder
ro.build.host=c3-miui-ota-bd66.bj
ro.build.tags=release-keys
ro.build.flavor=jason-user
ro.product.model=Mi Note 3
ro.product.brand=Xiaomi
ro.product.name=jason
ro.product.device=jason
ro.product.board=sdm660
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.locale=zh-CN
ro.wifi.channels=
ro.board.platform=sdm660
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jason
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=jason-user 7.1.1 NMF26X 7.11.16 release-keys
ro.build.fingerprint=Xiaomi/jason/jason:7.1.1/NMF26X/7.11.16:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# from device/xiaomi/jason/special_ro.prop
#
# For common ro override property
#fingerprint vendor set
ro.hardware.fp.fpc=true
ro.hardware.fp.goodix=true
# AD and sensor config
ro.qcom.ad=1
ro.qcom.ad.calib.data=/system/etc/calib.cfg
ro.qcom.ad.sensortype=2
#support night mode 2.0
ro.eyecare.brightness.threshold=7
ro.eyecare.brightness.level=2
#support noneui sensor
ro.qti.sensors.noneui=true
#
# from device/xiaomi/sdm660_common/common_ro.prop
#
# For common ro override property
#
# from device/xiaomi/sdm660_common/system.prop
#
#
# system.prop for sdm660
#
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/system/vendor/lib64/libril-qc-qmi-1.so
#rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
persist.radio.multisim.config=dsds
DEVICE_PROVISIONED=1
#
# Set network mode to (T/L/G/W/1X/EVDO, T/G/W/L) for 7+5 mode device on DSDS mode
#
ro.telephony.default_network=22,20
persist.sys.ssr.restart_level=ALL_ENABLE
persist.sys.ssr.enable_ramdumps=1
debug.sf.hw=1
debug.gralloc.enable_fb_ubwc=1
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
#ro.hdmi.enable=true
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
mm.enable.smoothstreaming=true
#codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD
#1048575 is 13631487 disable DSD
mm.enable.qcom_parser=1048575
persist.mm.enable.prefetch=true
#property to enable narrow search range for video encoding
vidc.enc.target_support_bframe=1
vidc.enc.disable_bframes=1
vidc.dec.enable.downscalar=1
video.disable.ubwc=1
# enable PQ feature by default
vidc.enc.disable.pq=ture
# Additional buffers shared between Camera and Video
vidc.enc.dcvs.extra-buff-count=2
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
persist.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196610 is decimal for 0x30002 to report major/minor versions as 3/2
ro.opengles.version=196610
# system property for maximum number of HFP client connections
bt.max.hfpclient.connections=1
#force disable Bluetooth AAC by default
persist.bt.a2dp.aac_disable=true
# System property for cabl
ro.qualcomm.cabl=0
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#system prop for Bluetooth SOC type
qcom.bluetooth.soc=cherokee
#system prop for wipower support
ro.bluetooth.emb_wp_mode=false
ro.bluetooth.wipower=false
#
#snapdragon value add features
#
#system prop for RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
#
# system property determining camera HAL to be used for a Video call
#
# 1 is camera1
# 2 or anything else is camera2
persist.radio.VT_CAM_INTERFACE=1
#Supported SE type
ro.se.type=eSE,HCE,UICC
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
#Enable stm-events
persist.debug.coresight.config=stm-events
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# system prop for NFC DT
ro.nfc.port=I2C
#property for vendor specific library
ro.vendor.at_library=libqti-at.so
#min/max cpu in core control
ro.core_ctl_min_cpu=2
ro.core_ctl_max_cpu=4
#hwui properties
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=2048
# disable navigation bar
qemu.hw.mainkeys=1
#property to enable VDS WFD solution
persist.hwc.enable_vds=1
#Increase cached app limit
ro.sys.fw.bg_apps_limit=60
#Settings to enable sensors
#Device Orientation sensor
ro.qti.sensors.dev_ori=false
#Persistent Motion Detector
ro.qti.sensors.pmd=true
#Stationary Detector
ro.qti.sensors.sta_detect=true
#Motion Detector
ro.qti.sensors.mot_detect=true
#Facing
ro.qti.sensors.facing=false
#CMC
ro.qti.sensors.cmc=false
#Gesture
ro.qti.sdk.sensors.gestures=false
#Expose aux camera for below packages
camera.aux.packagelist=org.codeaurora.snapcam
#disable UBWC for camera
persist.camera.preview.ubwc=0
#enable CAC
persist.camera.feature.cac=0
persist.camera.mobicat=2
persist.camera.stats.debugexif=2555904
# Create zram disk
ro.config.zram=false
#Enable for IMS feature
persist.radio.VT_HYBRID_ENABLE=1
#For RIJL netwrok video call
persist.radio.NO_STAPA=1
# Enable manual network selection function and distinguish 2G/3G/4G
persist.radio.rat_on=combine
#Expose tele camera for below packages
camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.miui.cit
#Limit camera for below packages
camera.limit.packagelist=android.camera.cts
#Set cutoff voltage to 3200mV
ro.cutoff_voltage_mv=3400
#Memperf properties
ro.memperf.enable=true
ro.memperf.lib=libmemperf.so
#logd buffer size
ro.logd.size=2M
#adjust voice call volume steps
ro.config.vc_call_vol_steps=11
#set maximum supported adapter voltage
persist.charger.max_voltage_mv=11000
#
# from device/xiaomi/sdm660_common/common_rw.prop
#
# For common rw override property
#
# from device/xiaomi/jason/special_rw.prop
#
# For common rw override property
# eyecare level
sys.paper_mode_max_level=32
sys.paper_mode_default_level=16
ro.qti.sensors.multitap=true
#enable pickup gesture
persist.sys.sensors.pug=true
#For camera
#enable dual cam low power mode
persist.dualcam.lpm.enable=1
#sat enable default
persist.camera.sat.enable=1
#defer cmd disable,
#preview speed optimized
#Re-enable defer mode,
#since multiframe component set to master priority mode already
persist.dualcam.defer.enable=1
#enable aggressive aec
persist.camera.instant.aec=1
#big enough ae bound
persist.camera.ae.instant.bound=20
#set antibanding auto to 50Hz auto,
#then 50Hz power country is priority
persist.camera.set.afd=4
#DXO branch enable DXO
persist.camera.dxo=1
#DXO enable cac
persist.camera.feature.cac=1
#DXO enable fovc for the video mode
persist.camera.fovc.enable=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.miui.version.code_time=1510761600
ro.rom.zone=1
ro.miui.ui.version.code=7
ro.miui.ui.version.name=V9
persist.nfc.smartcard.config=SIM1,eSE1
persist.sys.offlinelog.kernel
ro.product.first_api_level=25
persist.sys.mcd_config_file=/system/etc/mcd_default.conf
persist.sys.perf.debug=true
persist.sys.klo=on
persist.sys.whetstone.level=2
ro.ss.version=5.3.001-N
ro.ss.nohidden=true
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.carrier=unknown
ro.vendor.extension_library=libqti-perfd-client.so
ro.hardware.power_library=/system/lib/hw/power.qcom.so
persist.radio.sib16_support=1
persist.radio.custom_ecc=1
persist.radio.multisim.config=dsds
sys.shutdown.waittime=500
ro.frp.pst=/dev/block/bootdevice/by-name/frp
ro.wlan.chip=39xx
ro.wlan.mimo=1
ro.btconfig.if=uart
ro.btconfig.dev=/dev/ttyHS0
ro.btconfig.vendor=qcom
ro.btconfig.chip=QCA6164
af.fast_track_multiplier=1
audio_hal.period_size=192
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
tunnel.audio.encode=false
persist.audio.ras.enabled=false
audio.offload.buffer.size.kb=64
audio.offload.min.duration.secs=30
audio.offload.video=true
audio.offload.pcm.16bit.enable=true
audio.offload.pcm.24bit.enable=true
audio.offload.track.enable=false
audio.deep_buffer.media=true
audio.heap.size.multiplier=7
use.voice.path.for.pcm.voip=true
audio.offload.multiaac.enable=true
audio.dolby.ds2.enabled=false
audio.dolby.ds2.hardbypass=false
audio.offload.multiple.enabled=false
audio.offload.passthrough=false
ro.qc.sdk.audio.ssr=false
audio.offload.gapless.enabled=true
audio.safx.pbe.enabled=true
audio.parser.ip.buffer.size=262144
flac.sw.decoder.24bit.support=true
persist.bt.a2dp_offload_cap=sbc-aptx-aptxhd-aac
use.qti.sw.alac.decoder=true
use.qti.sw.ape.decoder=true
qcom.hw.aac.encoder=true
fm.a2dp.conc.disabled=true
audio.noisy.broadcast.delay=600
persist.audio.hifi.int_codec=true
audio.offload.pstimeout.secs=3
persist.sys.button_jack_profile=volume
persist.sys.button_jack_switch=0
ro.audio.nojack=true
audio.adm.buffering.ms=3
persist.speaker.prot.enable=true
persist.spkr.cal.duration=100
persist.audio.dirac.speaker=true
persist.audio.speaker.dualmode=true
sys.haptic.down.weak=9
sys.haptic.down.normal=17
sys.haptic.down.strong=30
persist.miui.density_v2=440
dalvik.vm.dex2oat-min-free-mem=209715200
ro.malloc.impl=jemalloc
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=generic
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.miui.has_real_blur=1
ro.miui.has_handy_mode_sf=1
fw.max_users=5
ro.mdtp.package_name2=com.qualcomm.qti.securemsm.mdtp.MdtpDemo
ro.config.sms_received_sound=FadeIn.ogg
ro.config.sms_delivered_sound=MessageComplete.ogg
ro.com.android.mobiledata=false
ro.product.manufacturer=Xiaomi
ro.config.elder-ringtone=Angel.mp3
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
persist.sys.mitalk.enable=true
persist.enable_task_snapshots=false
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.product.cuptsm=XIAOMI|ESE|02|01
persist.power.useautobrightadj=true
persist.radio.apm_sim_not_pwdn=1
ro.config.max_starting_bg=4
persist.added_boot_bgservices=4
ro.com.google.clientidbase=android-xiaomi
persist.radio.redir_party_num=1
persist.sys.handy_mode_cct=120
persist.radio.report_codec=1
ro.expect.recovery_id=0x896ad6c090bc451d960dca1859a631fc939bc96d000000000000000000000000

# ViPERFX Tweaks

lpa.decode=false
lpa.releaselock=false
lpa.use-stagefright=false
tunnel.decode=false
persist.camera.HAL3.enabled=1
ro.treble.enabled=true

exfat 126976 0 - Live 0x0000000000000000 (O)

RAM: 0 MB



Flash: 128 GB (116.480 GB actual)

ram1: 0.047 GB
mmcblk0: 116.480 GB
ram: 0.078 GB


Pantalla táctil para Xiaomi Mi Note 3

$47.77 For Xiaomi Mi Note 3 LCD Display + Touch Screen Digitizer + Fingerprint Key 100% New Tested LCD Screen+Touc

$25.99 100% New For Xiaomi Mi Note LCD Display + Touch Screen Replacement For Xiaomi Mi Note Pro Cell P

$20.99 LTPro TOP Quality LCD Display Touch Screen Digitizer Assembly with frame For Xiaomi Redmi Note 2 Red mi Note2 Phone Sensor Parts

$79.99 For 5.7" FHD Xiaomi Mi Note 2 LCD Display Touch Screen Digitizer Assembly Note2 1920x1080 Xiaomi Mi Note

$39.99
5.5" For Xiaomi Mi Note 3 LCD Display+Touch Screen Replacement Accessories for phone Xiaomi Mi <

$43.67 For Xiaomi Mi Note 3 LCD Display Touch Screen 5.5" FHD Test Good Digitizer Assembly Replacement For Xiaomi

$79.99 New 5.7" FHD Xiaomi Mi Note 2 LCD Display Touch Screen Digitizer Assembly Note2 1920x1080 Xiaomi Mi Note

$140.99
Original M&Sen For 5.7" xiaomi note 2 Mi note 2 LCD screen display+ touch panel digitizer with frame for Xiaomi

$6.59
New Mobile Phone Touch Sensor Panel Front Glass Lens For Xiaomi Red Mi Note3 RedMi Note 3 pro touch screen digitizer

$10.3 For Xiaomi Redmi Note 5A Note 5A Prime Touch Screen Panel Digitizer Sensor Glass + LCD Display Monitor Panel Module Assembly

$18.99 LCD Display Digitizer Assembly With Frame For XIAOMI MI Note Pro 5.7"Multitouch LCD With Touch Screen For XIAOMI MI

$44.99 For Xiaomi Mi Note 3 LCD Screen Display +Touch Screen with Fingerprint Button Digitizer Replacement For Xia

$36.8 @5.5" Original Display For Xiaomi Mi Note 3 LCD Touch Screen with Fingerprint ID Sensor Replacement For XIAOMI

$32.99
For Xiaomi MI Note LCD Display + Digitizer Touch Screen Replacement For Xiaomi MI Note Pro Cell

$21.12 Netcosy For Xiaomi Mi A1 LCD Display+Touch screen digitizer Assembly Replacement parts For Xiaomi MiA1 Mi5X LCD screen & Tools

$43.99 For Xiaomi Mi Note 3 LCD Display + Touch Screen Digitizer Assembly Replacement For Xiaomi Mi

$33.6
@5.5" 1920x1080 Display For Xiaomi Mi Note 3 LCD Touch Screen with Fingerprint Digitizer Replacement For Mi

$44.99
For Xiaomi Mi Note 3 LCD Display+Touch Screen With Fingerprint FPC Test Good Digitizer Screen Panel For Xia

$8.6 For hongmi Redmi Note 3 Note3 LCD Display Screen Panel Monitor Module + Touch Screen Digitizer Glass Sensor Assembly Frame

$150.51 5.7" AMOLED Note 2 Display For Xiaomi Mi Note 2 LCD Display Note2 Touch Screen Digitizer For Xiaomi Mi<

Batería de repuesto para Xiaomi Mi Note 3

$7.06 4000mAh 4050mAh BM46 Battery For Xiaomi Redmi Note 3 Mi note3 Pro/Prime Bateria Accumulator+Tools

$12.99 Original LEHEHE Battery BM46 For Xiaomi Redmi Note 3 Mi Note3 Pro BM46 4000mAh High Capacity Replacement Bateria Free Tool Gifts

$9.34 Xiao Mi BM46 Phone Battery Real 4000mAh For Xiaomi Redmi Note 3 Redmi Note3 Pro Original Phone battery

$8.78 Xiao Mi Original Phone Battery BM3A For Xiaomi Note 3 Replacement Battery 3300mAh High Capacity Phone Batteries+Tool

$9.77 2017 100% IST Note 3 Original Mobile Phone Battery For Xiaomi Mi RedMi Note 3 High Quality Replacement Batt

$12.59 Mi RedMi Note 3 Pro/Prime Phone Battery BM46 charger Replacement Batteries 4050mAh for Original xiaomi RedMi Note

$15.99
High Quality 4000mAh/4050mAh NOHON Original Battery For Xiaomi Red Mi Note 3 Redmi note3 BM46 With Retail Box

$9 Original Xiaomi BM46 Phone battery For Xiaomi Redmi Note 3 note3 Pro/Prime 4000mAh

$13.99 NOHON BM46 Battery For Xiaomi Redmi Note 3 BM46 Mi Note 3 Pro 4000mAh Replace Mobile Phone Batteries

$7.52
New High Quality Battery BM46 For Xiaomi Redmi Note 3 III Note3 4050mAh Mobile Cell Phone Batterie Rechargeable In stock

$8.03 Xiao Mi Original Replacement Battery BM46 For Xiaomi Redmi Note 3 Hongmi Note3 100% New Authentic Phone Battery 4050mAh

$7.23 Dxqioo BM46 4000mah battery fit for xiaomi redmi note 3 MI note 3 pro BM46 batteries

$7.35 Genuine BM46 4000mAh Battery For Xiaomi Redmi Note 3 Xiao mi Hongmi note 3 Pro

$8 4050mAh BM46 KALUOS Battery For Xiaomi Red Mi Note 3 Redmi note3 with repair tool

$6.07 Seasonye 4000mAh / 15.4Wh BM46 / BM 46 Mobile Phone Battery For Xiaomi Redmi Note 3 Mi Note3 Pro Retail Package

$6.31 Suqy 100% BM3A Battery For Xiaomi Mi Note 3 Note3 3400mAh Rechargeable Baterija Accumulator BM 3A BM-3A In Stock

$10.25 4900mAh BM46 For Xiaomi Redmi Note 3 Replacement Battery For hongmi Note 3 Prime Pro Batteries +tools

$5.85 High Quality 4000mAh BM46 replacement Battery For Xiaomi Redmi Note 3 Mi note3 Pro/Prime Bateria BM46

$9.44 Original Xiaomi BM3A Phone battery For Xiaomi Mi Note3 Note 3 3400mAh

$5.08 Srjtek For Xiaomi Redmi Note 3 Battery Replacement With NFC BM46 4000mAh For Xiaomi Redmi Note 3 Pro Batter

Fundas para Xiaomi Mi Note 3

$8.69 Xiaomi Mi 8 SE 6X A2 5X A1 6 Case Cover Mofi Canvas Fabric Splice Soft Phone Bag Back Cases for Xiaomi Note 3 / Mix

$3.99 Xiaomi mi note 3 Case ipaky Xiaomi Mi Note3 prime Case xiomi Silm Transparent Cover + Silicone F

$1.42 Xiaomi mi note 3 Case,Silicon scenery Painting Soft TPU Back Cover for Xiaomi mi note 3

$2.76 Mi Note 3 Armor Case Xiaomi Mi Note 3 Case Shockproof Robot Silicone Rubber

$7.19 Xiaomi Mi Note 3 Case Nillkin Frosted Shield PC Hard Back Cover Case For Xiaomi Mi Note

$8.99 xiaomi mi note3 case cover xiaomi mi note 3 flip cover leather silicone back hard protect MOFi case

$8.14
For Xiaomi Mi Note 3 Case Cover xiaomi mi note 3 pro Silicon Luxury Flip Lea

$8.59 for xiaomi mi note 3 case cover MOFI mi note 3 Fabrics Back Cover Case

$2.68
Ultra-thin TPU Case For Xiaomi Mi A1 Mi 6 Mi Note 3 Soft Silicone Cases Back Cover For

$3.74 for Xiaomi Mi Note 3 case Luxury Vintage leather cover phone cases for xiaomi mi note

$4.99
IPAKY Original Phone Cases For Xiaomi mi Note 3 Case Armor Shockproof Cover Carbon Fiber Silicon TPU Case For

$5.46 xiaomi mi note 3 case mi note3 case cover back mofi baby skin capa coque slim funda black protective xiaomi

$6.57 MOFI Case For Xiaomi mi note 3 Case Hight Quality Flip Case For Xiaomi Note3 Wallet Leather Stan

$4.99 For Xiaomi Mi 6 6X 8 SE 5 5X 5S Plus Leather Case for Xiaomi Mi Note 3 MIX 2 2S Max 2 3 PU Flip

$3.99 Xiaomi Mi Note 3 Case Litchi Leather Grained Anti-fingerprint Luxury TPU Shockproof Back Cover for Xiaomi Mi <

$1.02 Case for Xiaomi Mi Note 3 Case Cover 3D TPU Silicone Protectore for Xiaomi Mi Note3 Cover Capa b

$4.74 Xiaomi Mi Note 3 Case Cover IMAK Frosted Plastic Back Case For Xiaomi Mi Note

$4.74
Xiaomi mi note 3 Case PU Leather Business Series Flip Cover stand case For Xiaomi mi no

$6.96 Xiaomi Mi Note 3 Case Original MSVII Xiaomi Mi Note 3 Cover Luxury Slim Full

$2.51 For Xiaomi Mi Note 3 Case Ultrathin Transparent Case For Xiaomi mi note

Find Similar devices
Same CPU:
Same Display resolution:
Same ro.build.description: